Qosmio F750 and external 3D monitor

I can connect the IR emitter for use nvidia active shutter glasses and a 3D external monitor ? such as a video projector 3D?
How do I install the driver emitter?

To be honest Im a little bit confused.
Not quite sure what you do exactly.
Let's clarify some basic things.
The Qosmio F750 "glasses-free 3D" notebook was equipped with special internal autostereoscopic 3D display which does not require additional usage of 3D glasses.
The technology is called active lens which use the internal webcam to scan and control the eye position (face tracking) in order to ensure best 3D effect.
If you want to watch 3D on external monitor, you need a monitor which would support 3D technology (120Hz) and special 3D Vision 2 Wireless Glasses Kit because the Nvidia 3D Vision technology is designed for use with active shutter glasses and 120Hz monitors.
You can of course also play BD 3D movies using the integrated Blu-ray optical drive and the bundled player also on an external 3D TV connected to the notebooks HDMI 1.4 video output.
The 3D TVrequires 3D glasses too.

Similar Messages

[SOLVED]Battle for Wesnoth and external vga monitor

Hi all, i have my hp pavilion dm1 1010el hooked up to a 19'' external monitor via vga cable. When i plug it in, i use xrandr to mirror my screen, but when i try to launch battle for wesnoth, my external monitor becomes gray and wesnoth starts into LVDS (the laptop monitor...)
how can i fix this thing? it only happens with wesnoth, usually i can open things wherever i want
thanks!
Last edited by samuele.mattiuzzo (2010-04-30 10:38:35)

You could use xrandr to disable your notebooks "monitor" and only activate the external 19" monitor. This should force battle of wesnoth to run on the external display.
Gaming with dual head can sometimes be a problem. I am running a dual head combination (19" and 15" TFT) with a AMD HD4670 and radeon opensource drivers. When gaming I start a short shell script before launching the actual game to enable only the 19" display. Afterwards I use another shell script to set to dual head.
Edit:
This is my "singlehead.sh"
xrandr --output VGA-0 --off
xrandr --output DVI-0 --mode 1280x1024
This is my "dualhead.sh":
xrandr --output DVI-0 --mode 1280x1024
xrandr --output VGA-0 --mode 1024x768 --right-of DVI-0
HTH,
D$
Last edited by Darksoul71 (2010-04-29 22:06:15)

Solution Manager and external Central Monitoring system

We have a Solution Manager system SOL and a Central Monitoring system
CEN. The monitored system SDS is configured to report CCMS data to CEN
and I wanted SOL to be able to access this data. After configuring SDS
to CEN, CEN that the following entry in RZ21:
SDS#SDS_RZ20_COLLECT#SDS_RZ20_ANALYZE
After performing the wizard in SOL, SOL now has the following entries
in RZ21:
SDS2#SM_SDS2CLNT200_READ#SM_SDS2CLNT200_TRUSTED
This would indicate to me that SOL is reading the CCMS information
directly from the monitored system, rather than via CEN.
In the 'Setup System Monitoring' of Solution Manager the Central
Monitoring System and CEN destination are SOL and NONE respectively.
Is this configuration correct, and if not how do I correctly configure
it?
Is the monitored system now only reporting data to SOL, or is it
reporting to both CEN and SOL?
Regards,

Issue closed

Final Cut Studio 2 and External NTSC monitor

Hello.
I just purchased the imace 20" 2.4 machine. It's still in the box as I'm getting all my old files off my pc (last one, this makes me all mac!).
My question is this. I have final cut studio 2. What I want to do i use the mini-dvi output to go to an NTSC monitor for final Cut playback.
I haven't been able to find a solid answer on this. I know I can get another external VGA/DVI monitor and it would be work, but I need to use an NTSC (4:3) monitor for some projects.
Is this possible?
Thanks!
Bobby

Well, you can't use the file he sent unless you upgrade. But if you get the card dumps back, you should be able to LOG AND TRANSFER to ProRes on your system fine. Or was that the issue? They had garbage at the end?
Trashing preferences fixes a lot of FCP oddities.
Shane

Issues using macbook with bootcamp and external apple monitor

I am having issues using an apple external monitor connected to my macbook with bootcamp - in particular, if i connect the monitor to the computer when the computer is already on, it won't work. Also, when i disconnect the monitor fromt he computer, the computer screen will go black and I'll have to re-start
Anybody experienced the same and can help?
Thx

just make sure that while its standing on its side there aren't any plugs or cables on that side. I'm not familiar with the mb port setup, but having power, two usb, and a display cable could prose a problem for sideward standing if they are on separate sides of the machine.
as the first commenter mentioned the orientation of your computer is irrelevant, but you wouldn't want to have the weight of the laptop sitting ontop of a usb or video plug that's coming out the side.

Not possible with FCP6: HDV Footage and external TV (monitor) viewing ?

Hi all, I learned from another FCP6 forum when I'm working with HDV footage, FCP 6 allows you to view this via firewire on an external monitor or TV, but ONLY as downconverted DV. This works fine but in a worse quality on my external TV. Is there really no possibility to view on an external TV via TRUE HDV via HDMI output ?

The MXO from Matrox might work OK (though it will only output HD via SDI or Component analog, no HDMI output) but I'd contact Matrox first about using a DVI adapter with the unit. It connects via a full sized DVI connection.
But quite frankly, you'd be very happy with the power of a MacPro. Especially working with HDV files. Rendering would be a lot faster, Motion and Color would also benefit from the added power of an 8 core machine... plus you can use that Kona 3 card. Best there is IMHO.
Jerry
P.S. You are running professional software that really is desinged to be run on a professional machine like a Mac Pro...

MacBook run with case closed and external Keyboard/Monitor/Mouse?

I am interested to know if the MacBook will run with the case closed (with power connected and an external mouse/keyboard/video)?
The iBooks did not, the PowerBooks did. It is a feature I use all the time with my Powerbook.

It's documented by Apple to work that way and I've not heard any reports of it failing once the criteria were spelled out to the person who needed lid-closed operation.
But I don't believe this prevents idle time-out sleep (only the sleep otherwise induced by closing the lid). Are you referring to it entering sleep due to the idle time-out expiring?
RRS

No BIOS access on external HDMI monitor

setop: T440S (20AQS00500) with Ultradock and external HDMI monitor
Today I updated the Firmware of my Ultradock to Firmware version: 2.17.000 to resolve the famous 3sec blackscreen that is describes in so many places. That did in deed resolve that problem
I also updated my BIOS using the Lenovo Solution center to GJET74WW (2.24)
But now, when I boot, I do not see any of the BIOS diagnostic on my external monitor.
If I hit F1 the external monitor still stays black.
That would be harmelss. But I also run Truecrypt and the Truecrypt prompt does not show on the external monitor.
I have to blindly type my Truecrypt password and then Win7 shows nicely on the external screen.
Our of the dock I went into the BIOS and made sure the display is set to "docking station".
Any ideas ?

There should be a BIOS toggle for display priority at boot. I'm not sure if it still exists in the T440s or exactly where it is though.
EDIT: http://service.lenovo.partner-management.com/content/CoursewarePublic/15418/T440s_BIOS_Simulator.swf
Config > Display > Digital on ThinkPad/Dock
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Qosmio G20: How to get higher screen resolution on external 22" monitor

I have a Qosmio G20 and today I bought a Samsung 226BW external screen. The Samsung has a max/optimal resolution of 1680x1050px. The Toshiba manual sais the laptop supports an external screen resolution up to 2048x1536 ...
I have now tried all kinds of settings, but the highest resolution I get on the external monitor is 1440x900 (- same as the laptop).
1440x900 on the 22" screen is not enough for serious picture editing; it simply looks unsharp.
What am I doing wrong? I deeply appreciate any answers/feedback; because if 1440x900 is all I can get, I have to take the xternal monitor back to the store ...
if anyone is so kind !?
Espen.

Hi
The available screen resolution depends on the graphic driver. You cannot choose the favorite resolution of 1680x1050 because the graphic card driver doesnt support it.
Maybe a graphic driver update could helps.
By the way; a inf file should be supplied by the monitor manufacture. You can install such file making right click and choosing install.
Check also these forum threads:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19677
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19570&messageID=71767

IMac and External Monitor

I have an early 2006 iMac 20" core duo 2.0ghz 2GB Ram.
I already have an external 17" monitor plugged in with the mini dvi adapter.
I have recently purchased a 32" Samsung TV, which has PC Input. This will be arriving shortly.
Is there any way for me to connect both the TV and the external monitor to the iMac? I would rather mirror the display to the TV and extend the desktop onto the 17" monitor.
If there is a way to output to both, but by a different way - i.e. not mirroring and displaying - this would be great.
I didn't know whether it was possible for me to use some sort of splitter. So a mini dvi to 2 vga's. Then vga to tv and monitor.
Thanks for the help.

Hey Stephen
You might want to check out [DisplayLink|http://www.displaylink.com>
This Google Search: [multiple displays with intel imac|http://www.google.com/custom?q=multiple+displays%20with%20intel%20imac&sa= Search&client=pub-6263300333013957&forid=1&ie=ISO-8859-1&oe=ISO-8859-1&cof=GALT: %23008000;GL:1;DIV:%23336699;VLC:663399;AH:center;BGC:FFFFFF;LBGC:336699;ALC:000 0FF;LC:0000FF;T:000000;GFNT:0000FF;GIMP:0000FF;FORID:1;&hl=en]
And these from [MacWorld|http://www.macworld.co.uk/mac/news/index.cfm?newsid=20862] and [Cambridge|http://www.cambridgenetwork.co.uk/news/article/default.aspx?objid=43 026]
Dennis

External NTSC Monitor - 4:3 and 16:9 Question

I'm trying to find a configuration setting in FCP 5.0 when outputting to an external NTSC monitor that will force the image to "letterbox", rather than crop to 4:3.
I have a nice Sony NTSC monitor, but it's not the model that allows switching between 4:3 and 16:9 aspect ratios, unfortunately.
I don't want to have to replace this monitor at this time.
I see in the latest version of After Effects I can force the image to "letterbox" in the external monitor. I tested it, and it works perfectly.
Ironically, PhotoShop CS3 does NOT allow you to letterbox your preview to an external monitor. A widescreen formatted file appears cropped in my monitor.
So, my question is can I do this in FCP 5.0? Why am I stuck with a cropped image from a 720x480 aspect ratio? Is there a setting somewhere that will force the preview to letterbox on my monitor?
On a similar note, what will we use to replace NTSC monitors if you're shooting and editing HD?
Thanks so much.

FCP will not unsqueeze the image for you...you need a monitor that has this option.
what will we use to replace NTSC monitors if you're shooting and editing HD?
And HD monitor. But then you need some sort of HD capture card or output device (unless you are working with DVCPRO HD)...even HDV. And then you will need an HD monitor. The cheapest solution might be the Decklink Intensity and small HDTV...the intensity has HDMI out. But this only works if you have a MacPro. The MATROX MXO is next, and it connects via DVI. It can output a signal to an HDTV (component), or to an Apple Cinema Display or Dell 24" Display. That gets you broadcast quality on a computer monitor...believe it, or not!
http://library.creativecow.net/articles/ross_shane/MXO.php
Shane

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere.

Viewer and External Monitor doesn't playback at same time

When watching clips in the viewer window, they playback fine. But on my external monitor, it only shows the first frame from when it's played. when I stop playback, the external monitor then shows the last frame the Viewer window is stopped on. How can I fix it so that the viewer and external monitor playback the clip at the same time?
At the moment we're digitizing footage with the Offline RT Photo JPEG codec set to 75% quality.
A few days ago we were digitizing footage at 35% quality and that footage plays back fine. We moved to 75% quality at the editor's request. A few days ago we had created a few sample 75% quality tests for the editor to view. I loaded those clips into Final Cut right now and they playback fine as well. So it's all of a sudden just these new clips created yesterday :S.
Message was edited by: Phillip Roh

Yes.
Forgot to mention that the timeline plays all the footage back properly on both the canvas window and the external monitor. Sorry for not mentioning that sooner.
More discoveries! The playback 'freeze' only happens if I open a clip from the browser into the viewer. If I open a clip from the timeline into the viewer, it plays-back fine!
Message was edited by: Phillip Roh

I have an Apple Powerbook G4, and my monitor doesn't function. I have an external display Monitor, however it's stuck in extended screen mode. How do I get it to mirror or duplicate the display without use of the on-board?

As i had said, I have an Apple Powerbook G4, and my monitor doesn't function. I have an external display Monitor, however it's stuck in extended screen mode. How do I get it to mirror or duplicate the display without use of the on-board? Is there a Fn key combo i'm missing or is the issue more serious then i realize? any and all help and hints would be greatly apprichiated, thanks in advance.
-Powerbook User

The PowerBooks have an F-key that toggles mirrored and extended mode. My PB is loaned out right now but I think it was f7. The keycap has an icon on two overlapping rectangles, as I recall.
EDIT: Yes! Found a pdf of the PB manual it shows F7 is the toggle:

Can I use my monitor and external speakers with apple tv

I have an extra computer monitor (DVI input) and external speakers (3.5mm male audio jack.) Is there some combination of adapters that I can use to hook up an apple tv to them in order to stream from netflix, and my itunes library?

no but you can get tons of solutions where you connect something to your tv's minijack headset connector and then it wireless transfer the audio signal to a headset
there are both bluetooth solutions belkin have one I use and there are also solutions where the headset is included and they use their own custom protocol
but mind you there is no way to keep such setups in sync in terms of video and audio so if the system is poor in quality or pre-process the audio signal too much it cause audio and visuals to get out of sync

Qosmio F750 and external 3D monitor

Similar Messages

Maybe you are looking for