Qosmio G10 Graphics and Sound driver installation

Hi
I have recently tried to reinstall my Toshiba Qosmio G10 after downloading all the latest drivers of the Toshiba site.
Unfortunately I have had my motherboard and display replaced over the last 3 years (under Warranty) , which means all the hardware has changed from the original laptop I bought (now has Graphics card ,NVIDIA GeForce go 6600, new chipset, etc, as far as i remember).
Does anyone have a system recovery cd or a place I can download the correct drivers for this laptop.
I am a sys admin, and technical and have spent about 5 hours pulling out my hair trying to get the video and sound drivers working.

Hi!
It is pretty easy to get drivers for a Toshiba notebook.
Did you search on Toshiba website?
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Search for Qosmio G10 and then you will find it.
Bye

Similar Messages

Qosmio G10-100 - Need sound driver for Windows 7

Please please please can anyone help I have spend hours and hours installing loads of difference drivers and none work. I even tried installing DriveRobot and that installed a RealTec 97 but does not work.
I need a window 7 sounds driver for a G10 100 I am sure there is someone out there that has the same issues. Please note that when I go to the sound device it shows up and no sound drivers installed even if I install the Realtex ones.
I am pretty sure that the sound card build into the lappy is a SoundMax
Living in Hope
Greg

Hello
First of all you should check the specifications of your notebook and what sound card is built in. I have done this and the Toshiba page shows a built in AnalogDevices AD1981B sound card. That means a Realtek driver will not work.
On the Toshiba website I can only find Windows XP drivers that means Windows 7 or Vista is not supported :(
You can search on external websites and with Google to find a driver. Maybe you have a little bit luck. ;)

How do I get the details of my graphics and sound card from my computer.

With out sound like an idiot I need the details of the graphics and sound card from my HP t 480 uk, how do I do this. LJS.

After some digging, I was able to turn up this...
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00127607/c00127607.pdf
Your motherboard specs are listed here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00064822&lc=en&dlc=en&cc=us&product=397594
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Qosmio G10 graphics fault

Hi guys,
I have one problem with my Qosmio G10 with graphics. Image on the screen is completely incorrect. Pictures on the screen are divided to different squares that displayed in different points of screen. This bug starts just after power on the laptop.
For example the logotype QOSMIO is showed in different points of screen in next view:
In left side of screen are part of M, I and part of O, then OS and another part of M, then in right side of screen are Q that is cut to two parts and left part of O.
All things are displayed in the same way.
Pleas help me with it, if it is possible?
Thank in advance
IVAN

Hi
Its very sad to say it but it sounds like a graphic card problem!
In such case you have to contact the ASP in your country for a help. I presume the motherboard must be replaced because the GPU chip is fixed on the board and cannot be removed as single part .
Hopefully youve bought an additional extended warranty because the motherboard replacement could be a little bit expensive :(
Contact the technicians and ask for more details!
Good luck

Qosmio F10 display and sound drivers not installing

Hi, my hard drive went and on replacement we used the toshiba recovery disk.
We have installed the Intel Chip Software and then NVIDIA driver. It says its installed but makes no difference after restarting computer. The sound driver starts to install and then says driver not found. We have downloaded new drivers and keep getting the same results.
The operating system is XP home. Any advice is apperciated.

Hi Fresh,
> It says its installed but makes no difference after restarting computer.
Which difference should it make? After driver installation your computer will boot in the same way as before so I dont know which difference you expect after driver installation.
As Akuma wrote normally after using the recovery disk, all drivers and tools are preinstalled. Do you have yellow exclamation marks in device manager?

Re: Satellite L300-1A8 - SATA and sound driver

I had to change SATA from AHCI to compatible, because I wanted to install Windows XP on my L300. Is there any way to install SATA driver under existing OS?
And one more problem. I cannot install the sound driver.
Installation passes ok, but after restarting there is no sound or even installed sound card in device manager, and there is still by the PCI device.
Need help as soon as possible

> {quote:title=SoGood wrote:}{quote}well, first, I have tried to install WXP SP3 with integrated SATA drivers,but I got the blue screen after loading of drivers...I didn't pressed F6, mabe that was a problem...
Yes, that was the problem.
If you install Windows XP and you hade set the SATA mode to AHCI, you must press F6 to load the drivers.
Download the drivers and copy it on an external FDD.
But there is an other option. You can use nLite: http://www.nliteos.com
nLite is a tool for pre-installationd Windows configuration an component removal at your choice. You can also integrate the SATA drivers, Service Packs, etc. So must not press F6 and not use an external FDD.
By the way, it's normal when your laptop is a little bit slower, because the SATA drivers are missing.

Delete Graphic and Video driver from prompt

Hi Guys, Is there a way to delete a graphoic driver and video driver from prompt? Thanks

Why do you need to do it from command prompt?

DEAR FRIEND..PLEASE GIVE ME COMPAQ PRESARIO V3500 MODEL V3751AU AMD PROCESSOR AUDIO AND SOUND DRIV

DEAR FRIEND..PLEASE GIVE ME COMPAQ PRESARIO V3500 MODEL V3751AU AMD PROCESSOR AUDIO AND SOUND DRIVER

Hi,
This is all supported derivers from HP:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3413040&lang=en&cc=us...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Intel HD3000 graphics and sound drivers fail to load on Server 2008

I managed to install Windows Server 2008 x64 on a separate partition without Boot Camp, but I'm having issues with my drivers. Windows 7 drivers are compatible with Server 2008 in most cases. Since Boot Camp doesn't support Server editions I attempted to install the drivers myself, but I keep getting error 39 on my HD3000 graphics drivers. Went through multiple reboots, rollbacks, and driver reinstalls using both the official drivers and the Boot Camp drivers.
Is there a way to modify the Boot Camp driver install package to bypass the Windows 7 requirement? I tried to manually install the drivers from the Boot Camp folders (tried several variations of them as well) but I'm still not getting proper sound, graphics, or wifi. All my services are properly configured to enable them, and the device manager shows driver failed to load errors.
If people are able to get Windows 7 drivers installed that means there needs to be a way to do this with Server 2008 (not R2).
I need this to run natively, not virtualized.
Seems to me the easiest way to fix this would be to bypass the desktop-only limitations of Boot Camp, but I'm guessing there's no easy work around.
. Why the restrictions?
I'm running a MacBook Pro 8.1 (late 2011 release).
I tried using test mode but that failed to fix what I thought might be a driver signing issue.

IIRC, Apple doesn't expose the Intel embedded GPU to WIndows, only the discreet GPU. If my memory is correct, that would explain why you can't install the drivers for hardware that WIndows doesn't see.

Yosemite graphics and sound issues

this is my computer:
MacBook Pro (15-inch, Early 2011)
Processor 2 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
i have been dealing with a very inconsistent problem since i've downloaded yosemite.
I'll start with the one consistency.
my computer no longer chimes at start up. Thought it was a hardware problem. I have run an AHT to no avail. no problems detected. although it may be an issue with the lack of RAM seeing as 'the internet' recommends at least 8GB for Yosemite.
itunes takes approx. 10 minutes to open. (also may be a RAM problem to this is regardless of whether anything else is running)
as does iphoto
Now the inconsistent stuff:
the computer crashes when dealing with any time of image files may it be picture or video.
most of the time the computer will have some trouble playing video files and at times the whole computer will crash very spontaneously. I have updated the flashplayer as well as my media player of choice VLC. I do have stints when VLC will work just fine for several films but then will randomly crash.   When the computer crashes it will go into a start up loop of the gray apple screen to a blank gray screen which will then crash and restart again and again.
I can't, for some reason, never get the recovery mode to work. Command R takes an eternity and then goes to gray screen. Command D shows no problems.
I have reset the PRAM and SMC which at times works and at times doesn't in my quest to get past the gray blank screen.
after the computer has started up in my juggling act there is a graphics problem note.
youtube on safari is very glitchy. the glitchiness sort of began with Chrome so deleted it and started to use Safari sometimes no sound. sometimes the video lags. i have to move the scroll around a bit for it to work. once it gets the hang of it its fine though...
when the computer comes out of sleep it may take 30 seconds when i haven't used it for a while which i understand is a hardware sleep thing. i have heard stories of the black screen and functioning mouce and this happens here quite a bit. from 5 to 30 second of time. the main interesting point is that it at times starts up ok and at times will give me a very glitched out login screen, yet the login panel itself is fine.
i have been thinking about downgrading to maverick again or even lion for the sake of installing a new operating system and to deal with the RAM but i think there is a collection of minor problems and i don't really know what i'm doing completely. I will buy more RAM if this issues is salvageable. all in all i'm one those OMG my computer ***** now that i've downloaded yosemite people.
can someone please point me in a self suffiecent direction? are there any diagnostics i'm not looking into?   is my computer just too old for Yosemite? am I doomed to pay some mac wiz a ton of money? can all this just be a clunky OS and too little RAM?
i hope this helps other people and thanks for anything you have to add.

Also when I do a command R reboot, the computer freezes on the gray screen with the fan running vigorously. I have to shut it down by hand to do anything.

Windows 7 and Nvidia driver installation time-out

Hey everyone... I'm having issues installing my drivers...
I've overclocked the 9600 GPU in my 15" unibody quite some time back in windows vista. The thing is, after moving to windows 7, the official drivers from nvidia dont seem to install right. The hang for about 5 to 10 minutes and eventually finish, without completely installing the drivers.
I've tried manual installations only to receive a "operation timed-out" reply from the windows driver update dialogue. Is there anything anyone can help me out with? Anyone going through the same **?
I don't want to use drivers from "laptopvideo2go" however... they seem to install correctly but there's something about them that bugs me...
Thanks in advance!
Gordo!

Hey everyone... I'm having issues installing my drivers...
I've overclocked the 9600 GPU in my 15" unibody quite some time back in windows vista. The thing is, after moving to windows 7, the official drivers from nvidia dont seem to install right. The hang for about 5 to 10 minutes and eventually finish, without completely installing the drivers.
I've tried manual installations only to receive a "operation timed-out" reply from the windows driver update dialogue. Is there anything anyone can help me out with? Anyone going through the same **?
I don't want to use drivers from "laptopvideo2go" however... they seem to install correctly but there's something about them that bugs me...
Thanks in advance!
Gordo!

Macbook Pro Mid 2012: Issues with Yosemite update, graphics, and hard drive.

MacBook Pro (15-inch, Mid 2012)
Processor: 2.3 GHz Intel Core i7
Memory: 4 GB 1600 MHz DDR3
Graphics: Intel HD Graphics 4000 1024 MB
I've used 192.8 GB
Operating System: 10.10.1 (14B25) YOSEMITE UPDATE
I've been experiencing problems with my Macbook Pro shortly after the two year mark of when I've purchased it. There are a few things that are going on. I recently verified my Macintosh HD disk through disk utility and it stated in red that there was an incorrect number of file hard links & then error: This disk needs to be repaired and to restart and then press "R". However, everything before that seemed to have passed. I have everything backed up on an external hard drive and use the time machine frequently. Another thing that has been happening, usually when I'm opening one my adobe programs, is that my screen will go white for a minute along with unidentifiable pink glitchy shapes that don't move. My computer has not been running like it used to and is running slow, freezing, and periodically going white --- as I just mentioned before. I just know that something isn't it right. I've been having to restart my computer by manually pressing the power button more than I've ever had over the past two years. I always work on my computer on a hard surface in a cool area & my fans seem to behaving okay. I also recently installed the Yosemite update for the mac sometime during this past November too and noticed slower running speed, more freezing, and longer times to boot up afterwards. Please speak up if you're experiencing problems with your 2012 Macbook pro too and especially after downloading the Yosemite upgrade. I don't see how it's in any way acceptable that I should have to deal with issues pertaining to my graphics card. Sorry for this post being a little all over the place.

Hello brousch,
Thanks for using Apple Support Communities.
From your post I see that your Mac is spontaneously restarting whenever you see a certain animation on your screen. This indicates your Mac is getting a kernel panic caused by that animation. If you'd like to learn more about kernel panics, including how to troublshoot them, please take a look at the information in the link below.
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Have a great weekend,
Alex H.

Tecra R840 - Ethernet and sound driver Dynadock issue

Hey,
Tecra R840, model PT429A-007004, does not work correctly with the Toshiba dyna dock.
Specifically, the Ethernet and the audio driver for the dyna dock is not installed after running either the driver install from the dyna dock cd or running the latest driver from the website.
Does anyone know a fix for this?
Note: there is nothing in device manager to say that these drivers for the dock a missing, only when installing the driver does the wizard mention that the Ethernet and audio drivers could not be installed.
It also mentions that the dynadock has an issue with the on board graphics card but we have not had any issues with graphics, i.e. screens.

Hey,
Sorry for the late reply.
That fix does not resolve the issue.
Manually adding the drivers removes the yellow exclamations marks and fixes the audio, but it does not fix the Ethernet connection. So, currently we have had to plug the Ethernet cable directly into the model of laptop mentioned above instead of the dock.
Firmware update has not helped.
Can anyone from Toshiba please test this and let me know their thoughts or perhaps a solution if found? It would be greatly appreciated.

G530 4446-3FG No Modem Driver and Sound Driver work from Support & Download Center

ping at all,
when i try to install the connex audio driver or even modem driver for my new 3000 G530 446-3FG Notebook an error appears with an error alert -> device not found...
Conexant Audio Driver for Windows XP
Conexant Modem Driver for Windows XP
has anyone an idea for me?
thanks in advice, daniel
Message Edited by webmove on 07-02-2009 08:56 AM

My issue was similar. I don't know if this will help but support did nothing for me either.
I had problems upgrading and had to install from scratch. The install appears to have created a new Download folder at install (same date and time). I could not access the folder nor could I see any permissions or view or change the owner. I ended up turning off uac and restarting. I deleted the folder and created a new one. No problem now. You might check any itunes folders created with the install for the same permission issue.

Qosmio G10 Graphics and Sound driver installation

Similar Messages

Maybe you are looking for