Qosmio G10: How to get Toshiba Virtual Sound in Taskbar

System: Qosmio G10 running Windows XP.
When I bought the system, it came loaded with Toshiba's 'Virtual Sound' app, which replaced the standard Microsoft Volume Control app in the XP Taskbar (bottom right of screen). Now, the standard 'Volume Control' app appears in the Taskbar.
How do I get the 'Virtual Sound' app back? It enables me to easily switch between setting the sound for the laptop's internal speakers and using larger external speakers.
Thanks!
Ben.
PS. Love Qosmio's!

Hello Ben
First of all check if this application is preinstalled on your notebook. When application is preinstalled properly in task manager under running processes you can find TvsTray.exe listed there.
If the application is correctly installed you can also find an entry under HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\ CurrentVersion\Run when you start REGEDIT in RUN option.
Check all this. If there is something wrong I recommend you to install it again.

Similar Messages

How to get multiple beep sound?

Hi
I want to get multiple beep sounds as output if a comparison condition gives output as true.
Can anyone tell me how to get multiple beep sound?
Solved!
Go to Solution.

You could make it more pleasant if you would play a different sound file based on the comparison. (look in the windows\media folder for the sounds used by the OS. Try e.g. c:\windows\media\tada.wav)
Very few people still communicate in morse code.
LabVIEW Champion . Do more with less code and in less time .

How to install the Virtual Sound send by Toshiba?

I am a complete novice. Toshiba have sent an update for Virtual Sound. It has been downloaded but I have no idea where the file should be stored. Is it left as a zip file or does it need unzipping? Any suggestions gratefully received.
Peter

Hi
I have never received any files from the Toshiba but only downloaded it from the driver page. I think the Utility was zipped as other drivers on the Tosh page and you have to unzip it before running a installation.
You can save the zipped file everywhere on the HDD and then unzip this package.
The new folder should appear with the mentioned Virtual Sound.
In this folder you should find an exe file (I hope).
Simply run this exe file and follow the instruction

How to get the best sound from iMac?

Has anyone heard of "Pure Music"? Supposedly it's able to make music sound better. I downloaded it for a 15 day trial but haven't figured out how to get it to work with itunes radio. I'm using Klipsch 2.1 speakers with a late '13 iMac 3.1 quad core i7 w/ Yosemite. I'm not unhappy with the sound. Just wondering if there are any ways to enhance or tweak to get the best sound out of my system.

*just a little update, I fixed the problem.
I was suppose to put the Nvidia driver controller for the select program tab as well
Everything is running much smoother now, and I also had to turn off eco mode lol.

How to get / view Java Sound source code

Hi All,
I'm curious to view the Java Sound source code, is that possible? Let me know what I have done so far,
1. In eclipse I have mapped the src.zip from the JDK directory, now I am able to view most of the source code.
2. When I try to view AudioSystem.getProviders method it returns value from JDK13Services.getProviders
But I dont have source code for JDK13Services class, indeed i don't have com.sun.media package source code, in the src.zip
Do anyone know how to get com.sun.media package source code?
Thanks in advance,
Karthikeyan R

It appears that the 3rd entry of this search
[http://www.google.com/search?q=JDK13Services]
give both the javadoc and source for JDK13Services, as follows:
[http://www.docjar.org/docs/api/com/sun/media/sound/JDK13Services.html]
The other search listings appear to contain useful information, also.

How to get this guitar sound

http://www.youtube.com/watch?v=2C0F7eFxhXM&t=1m23s
There is a guitar in the background panned left just playing notes, not chords, and Im just curious if anyone has any idea how to best try and get this guitar sound in Logic? Probably a shot in the dark here but I cant seem to figure out how to get even close to it on my own. Not a logic pro user at all.

You'll improve as an engineer by following a few steps. Don't start with a Logic issue, start with an engineering issue and then you'll get how best to solve it with what you have.
Firstly, what makes this sound? How is it made and how do you think it was recorded? To me, this sounds like a humbucker pickup so I'd guess a les Paul or maybe an SG type of guitar going into maybe a Marshall or an Orange type of amp. This is not a DI'ed sound so you're going to have trouble here if you only have DI's.
To me this sounds like a ribbon mic, pretty closely mice'd, maybe paired with a 57 or sen 906, something like that. And it's mainly just HIM playing. Great sound, good player. Never underestimate this.
Now we have the internet so lets look him up and see if we can track down what he uses or used on this record.
OK, looks like he used a custom Ibanez AX-120 with a Seymour Duncan JB Jnr pickup, so it is a high output humbucker and it also looks like he went through an Orange stack.
If you can get hold of a guitar with a humbucker at the bridge, you'll be making the first positive steps. You don't mention what gear, if any, that you have only what software. Again, if you can get hold of a hi-gain amp and a couple of mics you're going to a lot closer in terms of gear, and hence sound.
I see Guitar Rig has the 'Citrus' amp, so if you can't get your hands on a real amp, maybe start here. Don't be shy with the gain but again, try to restrain yourself a little.
I think your main enemies here are that this record is very live and most of the sound is dialled in to the amp plus the choice of mics. So try to use a matching cab to the citrus amp and choose a ribbon mic in Guitar Rig, I'm sure there's at least one in there.
Finally of course, it's the way he plays it too. Good luck with that.
In summing up, always approach these things from an engineering point of view. What is it? What makes it what it is? This will take you a good way to where you want to be and make you a better engineer. After that, solving your issue with Logic will be simpler because you've gotten so much closer with your approach. This comes with time, and I mean years.
Hope this helps.

Qosmio X300 - How to disable the beep-sound of the Multimedia keys?

I've now tried quite long and looked through the net for one thing:
How do I disable the sound of the multimedia keys above the keyboard? I just find the beep-sounds unbelievable disturbing.

You must enter BIOS and search for option name something like BEEP SOUND or something similar and change to DISABLED. I can't tell where exactly this option is, because my laptop is away from me ;)
Hope it helps.

G10: How to get S-Video In to work outside of Windows MCE

Hi,
does any one know of a way to get the s-video in on a G10 qosmio to work out side of windows MCE i am unable to get it to work with Windows Movie Maker it just says the hardware is begin used by other software but even with just the defult process running i cannot get it to work?? any Idears?
Deklan
[Edited by: admin on 05-Aug-05 20:22]

Hi Deklan
Why I dont know a lot about windows media centre myself yet having only just purchased a G20 a week ago.
I can tell you how I am using s-video in and not with media centre itself.
I am not sure what software the G10 came with, but I have been using Intervideo windvd creator. this allows me to record tv through s-video and then edit/burn it etc. It saves the files in mpeg format you decide the rest. You have to make sure you set it so it knows you are using s-video of course.
hope this helps
Kimberley

Qosmio G20: How to get higher screen resolution on external 22" monitor

I have a Qosmio G20 and today I bought a Samsung 226BW external screen. The Samsung has a max/optimal resolution of 1680x1050px. The Toshiba manual sais the laptop supports an external screen resolution up to 2048x1536 ...
I have now tried all kinds of settings, but the highest resolution I get on the external monitor is 1440x900 (- same as the laptop).
1440x900 on the 22" screen is not enough for serious picture editing; it simply looks unsharp.
What am I doing wrong? I deeply appreciate any answers/feedback; because if 1440x900 is all I can get, I have to take the xternal monitor back to the store ...
if anyone is so kind !?
Espen.

Hi
The available screen resolution depends on the graphic driver. You cannot choose the favorite resolution of 1680x1050 because the graphic card driver doesnt support it.
Maybe a graphic driver update could helps.
By the way; a inf file should be supplied by the monitor manufacture. You can install such file making right click and choosing install.
Check also these forum threads:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19677
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19570&messageID=71767

Qosmio G20: How to get rid of large, green on-screen volume display?

Hi,
I have a Qosmio G20 which i bought in Japan last year and have since changed it over to English operating system and drivers. However one thing ive noticed that is different from the Japanese set up is that everytime i adjust the Volume level using the wheel on the right hand side of the laptop, a large green Volume level display comes up on the screen. I want to get rid of this cos it takes up nearly half of the screen. The Japanese version didnt have this problem.
I checked all the settings in Control Panel and various Properties sections as well but couldnt find anything.
Any suggestions how to remove it? Any other Qosmio users have this on their screen?
Thanks.

OK, here's how the volume bar works in all Media Center (2004-2005) and how to change it :
Create a .txt file with the following :
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Media Center\VolumeDisplay]
"Disable"=dword:00000000
"FontSize"=dword:00000024
"Color"=dword:00ffffff
"Timeout"=dword:000003e8
Don't include the --------
Now here are what the settings do:
Disable: (enable or disable the volume bar)
- 00000000 (bar is shown)
- 00000001 (bar is hidden)
FontSize: (decide the font sized used to display the word "volume")
- 00000024 is font size 36 (it's hexadecimal value), for exemple 00000014 is fontsize 20, etc..
Color: (the color of the control bar and of the word "volume")
00ffffff corresponds to white, 00000000 corresponds to black. also hexadecimal.
If you want an easy way to find out, just check the color you want in HTML:
If HTML is #00AAFF for exemple, then you need to put value 00FFAA00, or for HTML #556677, the value will be 00776655
Timeout: (it represent the duration of displaying the volume bar)
000003e8 corrsponds to 1000 ms = 1 seconde. For exemple, 1,5 second is 000005dc, or 2 second is 000007d0
So replace accordingly the above with the value that you like, save as "bar.reg" then double click on it and reboot the PC!
Enjoy, it was quite a hassle to find those keys because they don't exist initially! (and because for each try, I must reboot.. :/ )
Later,
Alcahest
ps: it works on ALL Qosmio machines ;)

How to get 5.1 sound macbook pro

I have plugged my mac to my 5.1 bose sound system but only the two left and right speakers are working, how can i get 5.1 sound

Read here:
OUTPUT SURROUND SOUND FROM YOUR MAC: (simplest way)
(*Check first to see if your Mac is capable of outputting surround sound through the Mini Displayport. Most models before early 2009 are not able to output multi-channel audio)
http://support.apple.com/kb/HT4241?viewlocale=en_US
- Use a Mini Display Port to HDMI cable and connect the HDMI into the Blu-Ray/DVD HDMI input on the receiver and the Mini Display to the Mini Display Port on your Mac.
- Go to System Preferences on your Mac. Click on the "Sound" icon. Then in the "Output" tab, select SONYAVAMP - HDMI
- Then go into Applications > Utilities > Audio MIDI Setup. On the left side of the window select HDMI. On the right side it then should say "Source: SONY AVAMP"
- Click the "Configure Speakers..." button in the bottom right of the window. Click the "Multichannel" tab. Then select "5.1 Surround" from the pull down menu. Click on each speaker to provide a test tone to make sure each is connect properly. Then click on "Apply"
- Last set is to go into the DVD Player to test it. Go to "Preferences" and click on the "Disc Setup" tab. Under Audio at the bottom of the window select "Digital Out - SONY AVAMP" from the drop down menu for "Audio output" *You now have 5.1 Channel Surround Sound from you Mac!
Courtesy parker612
Where it says 'Sony AVAMP", plugin your speaker system name.

[Qosmio X300] How to get MaxxAudio tab in realtek hd audio manager again?

First, sorry for my bad english, but I need your help =)
After I updated my audio driver (realtek hd audio) the MaxxAudio tab in the realtek window was lost...
To fix it, I have tried to "downdate" my driver, but I always can't see MaxxAudio.
I have also search solutions in Internet (Toshiba drivers page, forums, realtek.com...) I have found nothing.
As I had upgraded my computer to windows 7, I have tried to install an old version of this driver which was in the Toshiba Upgrade DVD, but no MaxxAudio tab in the realtek window...
And now, I have no Idea anymore, that's why I ask you.

http://www.otium-france.net/2009/10/30/astuce-trouver-et-installer-les-pilotes-windows-7-pour-le-qosmio-x300-de-toshiba/

How to get custom imessage sound

Im a big Xbox 360 Fan i would like to know how to use this sound as an imessage sound. any ideas on how i can do that?
I have the Ipad 2 will all the updates.
http://majornelson.com/2011/10/07/download-the-achievement-unlocked-sound/

You could make it more pleasant if you would play a different sound file based on the comparison. (look in the windows\media folder for the sounds used by the OS. Try e.g. c:\windows\media\tada.wav)
Very few people still communicate in morse code.
LabVIEW Champion . Do more with less code and in less time .

How to get the keyboard sounds on my ipad

For some reason the click sounds on the keyboard arent working and the other sounds such as receiving emails etc.....
I have recently reset my ipad and hasnt worked since
Any help would be appreciated.

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Where/How to get the Virtual KPIs in Crystal Reports?

hellooo!
We are developing SSM7 reports using Crystal.
And we have this example scenario:
1. Two NONKPI variables defined via Cube Builder:
    NONKPI381_ACT/TAR Net Sales         100000
    NONKPI382_ACT/TAR Expenses          80000
2. Virtual KPI
    KPI380_ACT/TAR (Net Income Contribution) = (NONKPI381_ACT/TAR - NONKPI382_ACT/TAR)
No issue in PAS and standard front-end reports as they show the KPI380 = 20000 (and other calculations) perfectly.
However, we need a specific report showing an Objective and it's associated KPIs (e.g. KPI380*) and Initiatives. Apparently, the main FACT table CPMS_EA_DATA does not contain values for KPI380. I browsed all the CPMS tables but to no avail, I have not seen any relationships to at least calculate KPI380. Could somebody please give me some advise?
Cheers and Thanks,
Ron Almonte

Hi there!
If you are trying to read data directly from CPMS tables, then you won't find any measure data there. That data is stored in the Application Server... The CPMS_EA_DATA values there are only used as a datasource for the application server, those values are not used directly for the scorecard calculations.
I would advise you to consider the upgrade to version 7.5. With this version you are able to use either Web Services or ODBO to connect SAP BusinessObjects Strategy Management to other SAP BusinessObjects tools.
This way you will be able to easily access, for example, the details on the 'Context', 'Perspective', 'Objective', 'KPI' and 'Initiative', and to the respective measures 'Trend Status value', 'Status Value', 'Actual', 'Target' and 'Score'. You are also able to access more detailed information on the PAS model for any measure, so that you can build your reports on Web or CrystalI, your Dashboards on Xcelsius, etc, etc...
I have used the ODBO provider (available starting with 7.5 SP2) to create a Universe, and then with QaaWS I was able to make that data available for Crystal, which made it very easy to built a report without any coding
Hope this helps!
Best regards,
Ricardo Vieira
Edited by: Ricardo Vieira on Oct 15, 2009 10:21 AM

Qosmio G10: How to get Toshiba Virtual Sound in Taskbar

Similar Messages

Maybe you are looking for