Qosmio G10 problem with Video RAM

G10 with replacement board with nvidia go6600.
After the overheat of videosubsystem appear artefacts on screen.
GPU chip was changed, but artefacts on screen not disappeared.
Than changed VRAM chips, but we did not find K4D553235F-VC2A SAMSUNG memory, and place instead it Hynix HY5DS573222FP-28 - fully identical memory chip.
But notebook is not loaded.
Whether it is possible to remedy something in BIOS?

Hello
For me it sounds like that the new VRAM modules are not compatible and so your computer doesnt start properly...
Not all modules are compatible with all notebooks or chipsets
As Paolo30 wrote this should be done from an authorized service provider. At least you should order the VRAM there because they can offer compatible modules.
Greets

Similar Messages

I am having problems with video and high content webpages freezing. I am also getting pixel lines across my webpages. Maybe two or three lines. I was running os 10.4 but I just up graded to 10.6 the other day. I have 2GB of RAM.

I am having problems with video and high content webpages freezing. I am also getting pixel lines across my webpages. Maybe two or three lines. I was running os 10.4 but I just up graded to 10.6 the other day. I have 2GB of RAM.

Exactlly which model iMac do you have?
see > How to identify iMac models
Unfortunately that is not all that uncommon for the Early Intel iMac's given there age and the fact that the air intakes are probably choked with dust. Then add the extra heat caused by running a more intense OS X which is causing it to run a little warmer than normal and putting extra stress on the graphic and display components.
My 6½ year old 17" Early 2006 Core Duo w/2GB of RAM is also running 10.6.8 and is also starting to get a single line that (knock on wood) goes away after a few minutes, while many others started getting permanent ones after 2 or 3 years. One thing that I think has helped, is that about every 3 or 4 months I shutdown and vigorously vacuum out the bottom grill work and small vent under the stand to keep it running cool.
On that note: unfortunately I can only suggest that you clean your intake vents and hope that no permanent or irreversible damage has been done.

Problem with video games

Hi all,
I have a problem with video games on Windows 8.1.
On my Windows 7 I could play all games without any problems.
Now I installed Windows 8.1 and I have problems with running video games: lower FPS, game breakdowns and sometimes even texture problems inside the game.
I tried to reinstall both Windows and Graphic drivers. I tried several versions of drivers.
I have Radeon HD 6870 and AMD Phenom II X4 955, SSD disk, 12 GB RAM.
The point is: the same games works perfect on Windows 7 but doesn't work right on Windows 8.1.
Can you, please, tell me if is there any other solution except going back to Windows 7 ?

Hi,
Please verify if these games are compatible with Windows 8.1.
If yes, please download and install the proper version of game file and driver.
Karen Hu
TechNet Community Support

PROBLEms with videos imac G4 flat 17'

PROBLEms with videos in imac G4 flat 17'

It would help to know what videos you are having trouble with? Are these from specific internet links? Are these playing back commercial DVDs? Are these videos produced by iMovie, Final Cut Pro, or iDVD of home video? Are these videos imported from an external Firewire or USB adapter such as Elgato's devices. You give us little to go on. Please give us more details what is going on?

Problem with video playback with iTunes

Several problems :
Problem with video playback with iTunes -
Since about a week, When I launch a video, it takes a long time to get started, then only the sound starts with no pictures - If I press pause then play the video is played normally. Did anyone face or heard about same kind of issue .
Problem with permission disk errors
After re-installing White Tiger and After I installed the last OSX 10.6.5 update
I found the following problem
Group differs on "Applications / Utilities / AirPort Utility.app / Contents / Resources / wanArrow.png", should be 0 instead of 80.
Last but not least :
My computer seems slow - I have 60gig free on My hard drive and I test my hard drive and everything seems all good .

What was the fix for this? Everything has sucked for my itunes video playback since the last major revision release.

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

I think theres a problem with my ram someone help me please

I have a ibook g4 mid 2005 model and the hard drive says zero kb free i deleted half of my applications i dont need and it still says zero kb free. is there a problem with my ram? or is there a mac virus or somthing? also when i opened a game after a while it said force quit please and delete stuff becuase your hard drive is full. someone help me please!

It does not sound like a RAM issue but a disk problem. You might just need to empty the trash so that the deleted space is marked free. Otherwise it is best to boot from an install CD, run Disk Utility, and do a "Repair Disk"

I cannot drop any pictures in iMovie 9 (no problem with video)

I cannot add any pictures in iMovie 9. I have no problem with videos, but when I want to drag and drop pictures, it does not work. (Pictures do not drop..) Does anyone know how to do?
Thank you a lot

You need to create a play list of songs that you would use for movies - mine is called Music for Movies. Then when you click on the music icon (the first box in the line of 5 in the grey bar across the lower third of the screen) and a drop down menu will appear showing all your play lists. Then simply drag and drop, but make sure that you hover over the video clip that you want to add the music to. If you don't the music will be added to the start of your presentation. You can always move the position afterwards. NOTE - if you want to add to your play list do it before you start your video editing as the list does not always update when I Movie.

Problem with Video capture Device

i have a problem with FME. i am using Avermedia TV capture
device and Canon 3ccd Digital Video Camcorder ( PAL ) when i open
the FME interface the warning given for " Problem with Video
Capture Device".
i read all the topics in Flash Media Encoder Category, if
this problem occures my capture device ( i expect MPEG ) how to
solve this problem?
Thanks,

The Device Matrix is something we'll be updating in the
future as we continue to test more and more equipement. Ideally, I
would like for users such as yourselves to be able to add to it and
tell us what has worked for you as well. If anyone has any ideas
about what technology we should use to do this (e.g., this forum? a
wiki?) please let me know.
Regarding the devices not working - the main problem we see
is that the system requirements are not being met. Here is what to
check for:
- are you running on Windows XP (only supported OS right
now)?
- do you have DirectX client runtime version 9c or higher
installed?
- do you have hardware acceleration enabled?
- do you have 32bit graphics enabled?
- do you have the latest direct show drivers from the
card/device manufacturer?
Thanks,
Chris Hock
Adobe Systems Inc.

Motorola SB5101E - problem with video chat

Hi. I have cable modem Motorola SB5101E and connect to net be cable TV .
All is normal , functional, audio, text, etc. but I have problem with video chat be iChat. (3,1) According info from Motorola support is this cable modem without firewall and without any ports, cable TV provider was inform me, so in his server is none block none ports for me, therefore I have maybe any problem in me computer. But Where ? Can you help me anyone ? Thank you in advance and have a nice day.

Hi Jirka:
Do you have your firewall active on your mac? (System preferences>Sharing>Firewall) If the firewall is on, you need to open some ports.
Report back and give us more details on your set up to troubleshoot your issue.

FMLE 3.0.0.4743 Problem with video capture device

log:
Tue May 05 2009 14:26:54 : Selected video input device: Beholder A/V Capture (SAA7135) [Slot 2]
Tue May 05 2009 14:26:54 : Selected audio input device: Beholder Aud Capture (SAA7135)
Tue May 05 2009 14:26:55 : Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use.
Tue May 05 2009 14:26:56 : Audio Device Error : The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control.
Flash Media Encoder 2.5 working without any errors

The second message that you are getting "The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control." is because your device does not let you change intensity of volume. This warning message is just to tell user that volume slider will remain disabled for the selecetd device. This is new addition in FMLE 3.0 and was not there in FMLE 2.5
Also for first message, please make sure that no other instance of FMLE is already running using this device. You can verify this from task manager. If any other instance of FMLE is running then please close that instance so that device gets free for new instance.

Problem with video capture device, with a virtual camera

I try to use Adobe Flash Media Live Encoder 3 with a virtual camera(DirectShow Filter) but met such a problem:
"Error connecting input preview RGB filter."
"Failed with error 80004005:SetupInputVideoPreview(pFilter, pguidCategory)"
"Failed with error ffffff97:SetupVideoPreview(pFilterSource)"
"Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use."
However, it is good to use AMCap,
what's the problem with FMLE.
Looking forward to your replies. Thx!

Did you ever figure out the problem/solution?
I am experiencing the same thing with my virtual camera filter when connecting to FME?
Shawn

PM8M-V compatibility problems with different rams?

hi, can anyone help? i'm having problems with two rams...as one is a geil 512 DDR3200 ram and the other a kingston 256 DDR3200 ram. problem is the first boot is ok as bios detects both rams...but after shutting down and restarting again, the system only detects the 256ram... but if i only put the 512, its ok on its on. if the 256, its ok on its own too...but if both, the it won't boot up or sometimes if i'm lucky it only detects the 256 if both is in...any suggestions?
RIG:
P4 3.2Ghz
Geil 512 DDR3200
Kingston 256 DDR3200
SATA II Western Digital 120GB

sadly with only 2 dimms...it doesn't really work...so how? sigh...i don't think the seller will allow a change don't they?
P/s oh ya i happen to notice that ya kingston ram is at 380mhz? err in my bios its only at a auto mood of 200mhz...is that ok?

[T410] discrete gfx - Problem with Video Card and Windows Aero -anyone using 4Gb memory modules?

[3/3/2010 Update]
There's a issue of using 4Gb sticks on T410 currently that results in video output artifacts and aero interface problems when using Lenovo supplied drivers v8.16.11.8825. I think I can call it confirmed (Three people including me face this issue).
Possible workaround is to install modified EliteBook 8440p video driver (read along this thread) comes with a BIG drawback of not being able to change brightness level within Windows 7. To sweeten it a little bit - you can set luminance level at POST screen, when computer boots up.
[Original Message]
Encountered strange behavoir of my T410.
I have a T410 with 256Mb of Video Memory and 1440x900 display, a T61 with 128Mb of Video Memory and 1400x1050 dsplay and external monitor HP w2338h with 1920x1080 resolution.
If I connect external monitor to my T410 and launch Visual Studio 2010 Beta 2 - image blinks and comes back with Aero disabled. Looking through event logs reveals the lack of memory. Entry information can be found further.
Now If I do the same with my old Thinkpad T61, connect the same monitor using the same cable - I can open as many Visual Studio 2010 Beta 2 instances I like (tried 5) and nothing blinks and Aero stays enabled.
Actually I find ridiculous, a notebook with more VRAM cannot archive the same performance as notebooks with less.
Does anyone know what path should I pursue to solve this issue?
UPDATE: Simply running multiple instances of Visual Studio 2010 Beta 2 without external monitor causes Aero disabled as well.
Log Name:      Application
Source:        Desktop Window Manager
Date:          2/4/2010 7:32:21 PM
Event ID:      9020
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
The Desktop Window Manager has encountered a fatal error (0x8007000e)
Error 2/4/2010 7:32:21 PM Desktop Window Manager 9020 None
Solved!
Go to Solution.

mat3y wrote:
I have the same problem with T410 and aero disabled. I am not using VS and I get this error anyway.
The Desktop Window Manager has encountered a fatal error (0x8007000e).
This must be buggy drivers, on Lenovo download site is just the one and the only initial driver for T410 graphics card.
What software were you actively using when this error occured?
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

Regular problem with video playback & audio video sync

So, I am regularly having two problems (I wonder whether they are connected) that I cannot solve and am hoping someone can tell me if I am out of luck or if I need to do something or add something.
For example, because it happened again today. These are details about the file stuff:
Type:AVI
Bit Rate:133kbps
Dimensions:624x352
Audio format: LameMP3
Frame rate: 23 frames/second
Data Rate: 1131 kbps
Video Sample Size: 12 bit
Video Compression: XVID
First Problem: If I play the file - I use Media Player Classic - it plays fine. Open it in Windows Media Player and it plays fine. Try to edit it in Premiere and the file loaded into Premiere is filled with what I believe are called audio video sync problems, so I have to constantly unlink audio and video and adjust it. It loads and does not need to conform.
I have the same problem on my laptop(Windows XP Home) and desktop (XP Pro), the desktop with twice the RAM. I have the K-lite Mega codec pack installed. I would call myself a beginner when it comes to video editing. I understand generally what codecs are but I am not capable to making any tweaks to the K-lite Mega codec pack (if I should have) so it is setup as installed.
Second Problem: The video in the playback box never plays back normally. I have tried adjusting the playback settings: have changed the aspect ratio between the software and harware option and adjusted between the three desktop display options. Occasionally it is "ok" but most of the time not and never just normal.
Any help is much appreciated.
Thank you.

I tried this already and then we had a blackout so going to try again and hope it goes through before a second one...lol
Hello:
Thank you Robert J. Johnston, the_wine_snob, Paul_LS and SteveGrisetti for your help so far.
So this is where I am at now:
Files all seem to be of the same type, so I will just say "the file" for the one I am working with right now.
Loaded file into VirtualDub. I like that program. Well done, whoever made it. Did some basic cutting of unwanted stuff. Saved as AVI. Saved both a Direct Stream Copy and a Full Processing Copy.
Opened the FP copy in Premiere Elements and it plays without audio sync problems that I can see. Have edited it some so far and still no problems.
Before I do any more editing work, I decided to save it (SHARE) in different formats to see what happens.
Goal: Looking for no audio sync problems. Best quality I can get with a 1GB file size limit.
Saved as DV-AVI: plays fine. no audio sync probelms. love the video quality. 2.95GB, so too big
Saved as Flash: Do not see any audio sync problems. Do NOT like the quality (flips back and forth between clear and all pixely (is that a word). 32 MG
Saved as Mpeg: Media Player won't play it (thought Media Player with KL Mega Codec played everything?) (It loads it but doesn't play?); Quicktime won't play it. Windows Media Player just did. Do not see any audio sync problems. Like the video quality. 631 MB.
Saved as Windows Media: Do not "think" there are any audio sync problems; if there are, they are very subtle. Not crazy about video quality. Better than flash video option though still flickers between two types of qaulity (if that makes sense) . 52MB
Any suggestions as to what I should do at this point to meet my stated goal. I assume [share]ing is what I should do? Is there any exporting or any other options I do not know about. Without your help I figure I will Share to MPEG? Not sure why Media Player won't play it and Windows Media Player will?
Any thoughts on the best choice for me? Thanks for your help.

Qosmio G10 problem with Video RAM

Similar Messages

Maybe you are looking for