Qosmio G20 AC Adapter damge - need IC chip part number

Hi,
My Toshiba Qosmio g20 AC Adapter has been damaged due to an electrical short circuit.
It's 8-pin IC Chip inside the board has been completely burn out so that i could not even read the part no of that IC chip.
If some one knows its part no, please let me know.
Technical Details :
Toshiba AC Adapter - PA3237U - 1ACA
Input 100-240V ~ 2A
Output 15V - 8A
Thanks,
ABHI

I have a continuing problem with the power adapter socket into the laptop. It has always been loose and has caused charging difficulties. Eventually the adapter broke and I purchased another and the same thing happened! I am on my 4th adapter which has now stopped working! Is there any way the socket can be changed for something a little more robust?
I know I sound like a clumsy klutz but there are three other laptops in the house which have never given me any problems.
Can anyone out there advise or help?

Similar Messages

Ibook g4 12.1/1.33 -model M9846LL/A - need hdd ribbon part number!! help!

Hi,
Quick question..
I have an ibook g4 12.1/1.33Mh (model M9846LL/A) that was given to me, it works but but its looking for the system (hard drive) it needs a new hard drive, the problem here is that the old hard drive was taken by the former owner out with the ribbon included and I cant get in tour with him, so I need to get a new ribbon to be able to connect the new hard drive I already have - such thing missin I did not know until I opened the ibook-, I cant find such part number anywhere on the web or where to buy it... can anyone help me on this?, I have taken the hole laptop apart and just waiting for the ribbon.
The part number for the logic board is 820-1832-A if it matters...
Thanks
murillo

Thanks so much for your reply.... after looking around for a few hours I finally got the part I needed and order, this is the one:
http://www.macrecycling.com/hard-drive-connector-ibook-g4-1214-p-100234.html
The last ibook made (12.1/14.1 1..33Mh) was built differently (logic board) and does not use the normal ribbon (like the one you were kind to appoint, this one connect to the other side of the logic board), this logic board does not have other connection for the ribbon, just a straight adapter on the same side where the hdd is located, it just needs an adapter to connect, look at this logic board:
http://www.macrecycling.com/logic-board-133ghz-ibook-g4-12-p-100237.html
This one shows the actual logic board and as you can see the connection is made (on the left side of the picture just above the capacitors)...
Finally I was able to order the part so I should be ok.. thanks so much for your time...
Have a nice weekend.

I Can't Find My Product "Hp Pavilion Dv6-6c50se" on PartSurfer, I Need My Fan Part Number

Hi, as i said in the Subject i can't find my product..
Pavilion Dv6-6c50se
my S/N: [Edited for Personal Information]
my P/N: A7P18EA#ABV
now what? i really need to change my Fan and i can't get the Part Number of it..
Please Help.
This question was solved.
View Solution.

You're welcome
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Need to add part number in MRR database

Hello All,
Need to add next part number:
256827 (PARTICION 1.4512+2B) as SAP Source in database
Database name is Tenneco MRR 2.0 on TALAKDB1
Supplier is Tenneco Edenkoben (vendor number is 1234 and it's internal)
Receiveing plant is ABC..
How to solve this.. Please help.
Regards,
Forum Shah

Hi,
Please clarify is it related to IDOC system? If yes please refer below link. what is the meaning ofNeed to add next part number? Thanking you.
http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-ii/technology/sap/19/

Need AC adapter for Satellite A30-614 / Part Number: PSA30E-1Q8EE

Hi,
I want to buy power adapter for this below given information model laptop. I couldnt find the adapter on website as this model is not in use anymore. I need a help, so where can i buy.
I dont even have the adapter information. Please let me know. If anyone know about this model please give me the information to [email protected]

This adapter is for the Sat A30.
*PARTNUMBER:* PA3290U-1ACA
*Specs:* AC Adapter 100-240V AC 50-60Hz 120W with 19V DC Output
I dont know from which country you are but you can find this AC-Adaptor on ebay. You can also buy this AC Adaptor at a Toshiba ASP.

Satellite 3000-514: Need FL inverter part number

Hi,
I am looking for an inverter for my toshiba satellite 3000-514, because my display is almost dark. Does anybody know where I can buy/order it or what the product number is?
Thx
arne

Hi
Well, a friend of mine has ordered some parts from the Toshiba service partner.
I assume you can also order the FL inverter from the ASP in you country.
As far as I can remember the FL inverter is not very expensive. But do you know how to change it?? Do you have enough experience to replace it??
I think its a very risky procedure because the whole screen must be removed. And you know; the screen is a one of the most expensive parts on the notebook.
I think if you dont be any technician so ask someone who has more experience in such reparation procedures. The best way is to ask the service guys.

Satellite A50-543: Need Heatsink cooler part number

Help me please! I can't find this partnumber. Mail it me plz!

Hi
I have found a cooling module for a Satellite A50 & A55
The part number is: P000401740
But Im not sure if it is compatible with your A50-543
Well, generally you can order all parts form the Toshiba service partner in your country.
In my opinion it should be possible to find out the right part number.

Need laptop touchpad part number

I have a DV6500t CTO laptop with an Intel processor and no fingerprint reader. The touchpad buttons are starting to give out. I don't want to use an external mouse. Can someone provide the touchpad replacement part number. I have no problem opening up the laptop to replace the touchpad as I've opened the laptop up before.
TIA

Hi,
Please use page #29 of the second manual of the following link:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&dlc=en&document=&product=5078661
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Need TV aerial adapter for Qosmio G20

Hi - I desperately need a lead/adapter that will enable me to connect a conventional TV aerial lead to my Qosmio G20. Can anyone advise where these can be purchased from - I've looked at the Options website - and may be missing the obvious - but I can't find one.
Any advise appreciated. Thanks.

Hi - I need to connect a TV aerial to my Qosmio - not the Qosmio to a TV! There's an aerial input on the rear but it is not a standard UK type adapter (i.e. a conventional aerial lead will not fit). Please can someone advise what type of lead or adapter I need (and preferably where in the UK I can purchase one from) to connect my laptop to our house TV aerial.
Many thanks.
Matt

Qosmio G20 Vista drivers? Not needed to install Windows Vista

Hello,
I am new at this forum. My name is Francisco and I live in Brazil. I own a Toshiba Qosmio g20_105 and it is running Windows Vista Ultimate EN RTM 6000 without problems.
To do this, you must perform a fresh install of Windows Vista. The drivers for network (Intel PRO100),for audio (Soundmax), for TV (Toshiba PCI Tuner), modem (toshiba modem), Alps pointing device are installed directly from microsoft. You must install Toshiba nvidia display driver, Toshiba Bluetooth (monitor and stack), Toshiba texas flash media driver, toshiba RAID (driver and utilities), toshiba remote control manager and ConfigFree for Windows Vista.
You must have the Toshiba RAID drivers to install from the windows Vista DVD. Otherway, Windows does not recognize Toshiba RAID 0 and RAID 1.
Below some pictures of my G20 Desktop screen:
http://www.rabayjr.com/vista/myqosmiog20screen1.jpg
http://www.rabayjr.com/vista/myqosmiog20screen2.jpg
http://www.rabayjr.com/vista/myqosmiog20screen3.jpg
And here is an example of using deskscapes animated backgrounds with Windows Vista, called dreamscene.
It is in paused mode
http://www.rabayjr.com/vista/myqosmiog20screen4.jpg
To perform a fresh install of windows Vista:
Please, download the Toshiba RAID drivers from here:
http://www.rabayjr.com/vista/drivers/raid.rar
1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
2. Insert your Microsoft Windows Vista Edition Bootable DVD.
3. Power on your computer and press F12 to display the boot menu.
4. Choose the option to boot from the CD/DVD drive.
5. On the first setup screen, choose your language options then press "Next".
6. Press "Install Now".
7. Type in your Product Key then press "Next".
8. Accept the license terms by checking the box then press "Next".
9. When asked "What type of installation do you want", press "Custom (advanced)".
10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
11. Browse to the location you have copied the RAID drivers to then press "OK".
12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
13. Make sure the TOSHIBA RAID driver is selected then press "Next".
14. Continue the installation of Windows Vista as normal.
Now you will need the Toshiba drivers for your Qosmio G20:
See the Device manager info:
http://www.rabayjr.com/vista/qosmiodrivers1.jpg
Drivers:
1. SD memory controller
http://www.rabayjr.com/vista/drivers/SD_memory.rar
2. Bluetooth monitor and stack
http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
3. Nvidia display driver GeForce Go 6600
http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
4. Texas FlashMedia controller
http://www.rabayjr.com/vista/drivers/flasmedia.rar
And finally the Toshiba utilities:
Toshiba Configfree
Toshiba Assist
RAID utilities
Remote control manager
Toshiba SD Memory utilities
That's it...
So I must tell to you that Toshiba Qosmio G20 is Windows Vista Ultimate capable, indeed.
Hope this helps people who need and want to install Windows Vista Aero on their Qosmio G20 machines.
Message was edited by: FranciscoJr

UPDATED POST: On March 08, 2007
This is a step by step guide for those of you with problems to get Windows Vista functional on your G20 Qosmios
Use a Windows Vista English Version RTM Ultimate 6000 DVD for installation.
1 Backup your personal files and important data to a removable device, CD, DVD, flashmedia, pendrive, etc...
2.Check your Qosmio player installation. if nedeed, reinstall it with the latest version (multilanguage), posted on Toshibas site (download drivers section).
3.Download and copy the Toshiba RAID drivers to a removable media
Please, download the Toshiba RAID drivers from here:
http://www.rabayjr.com/vista/drivers/raid.rar
4.To perform a fresh install of Windows Vista, Follow the steps below
-1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
-2. Insert your Microsoft Windows Vista Edition Bootable DVD.
-3. Power on your computer and press F12 to display the boot menu.
-4. Choose the option to boot from the CD/DVD drive.
-5. On the first setup screen, choose your language options then press "Next".
-6. Press "Install Now".
-7. Type in your Product Key then press "Next".
-8. Accept the license terms by checking the box then press "Next".
-9. When asked "What type of installation do you want", press "Custom (advanced)".
-10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
-11. Browse to the location you have copied the RAID drivers to then press "OK".
-12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
-13. Make sure the TOSHIBA RAID driver is selected then press "Next".
-14. Continue the installation of Windows Vista as normal.
5. Go to Microsoft update and download all important updates available. If you wish you can install your native language, if other than English, from the Microsoft site.
let Windows install all the drivers found for your Qosmio G20.
6. Reboot your machine and follow with the steps below.
DRIVERS YOU MUST INSTALL:
1. Alps pointing device driver (This is from Alps and working fine with your Qosmio G20)
http://www.rabayjr.com/vista/drivers/alpsdriver.rar
http://www.rabayjr.com/vista/qosmioalps.jpg
During the installation, Windows will complain that you are installing an early device driver. Do not attempt to this, Install it anyway.
This is because the Windows driver for this device is originally installed with a more recent date and version from that you are trying to install.
But the driver posting here is the correct from the Alps for your Qosmio g20.
2. Bluetooth monitor and stack
http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
3. Nvidia display driver GeForce Go 6600
http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
To install the nvidia 97.52, you must do it manually:
open the Device manager
look for the Video adapter/nvidia Gforce go6600
Driver update options
Look for a driver in computer
Choose a list of device drivers in computer
With disc...
Lool for the place you've extracted the nvidia 97.52.rar
Find the nvts.inf and open it
You will come to the following screen:
http://www.rabayjr.com/vista/qosmionvidiainstall.jpg
From a list choose your video card (go6600) and install it.
If you think it is difficult, please see the VIDEO Nvidiainstall.avi:
http://www.rabayjr.com/vista/drivers/nvidiainstall.rar
After the extraction, play it with Windows media Player
4. Texas FlashMedia controller
http://www.rabayjr.com/vista/drivers/flasmedia.rar
5.SoundMAX integrated digital audio. Driver 5.12.1.5410
http://www.rabayjr.com/vista/drivers/soundmax5.12.1.5410.rar
run the setup.exe and at first remove the driver you have installed on your Qosmio G20.
reboot the computer
Run the setup.exe again and install the new driver. At some install point, Windows Vista will need a confirmation, if you trust Analog devices incorporated to goes on..
http://www.rabayjr.com/vista/qosmiosoundmaxinstall.jpg
Continue with the installation and after finishing the process, test the functionallity of the new driver
OR
If your G20 model is using the Sigmatel HD audio chipset, so you must install other driver than the Soundmax integrated digital audio
It is the SigmaTel HD Audio Driver for Windows Vista Version: 6.10.0.5324
link:
http://www.rabayjr.com/vista/drivers/sigmatelhd.rar
6.Intel PRO Wireless 2200BG Vista version 9.1.0.115, including the Intel chipset identification utility.
http://www.rabayjr.com/vista/drivers/intel_wireless.rar
And for the Utilities you can download them from here:
1.Toshiba Configfree
http://www.rabayjr.com/vista/drivers/configFree.rar
2.Toshiba assist
http://www.rabayjr.com/vista/drivers/assist.rar
3.Raid utilities
http://www.rabayjr.com/vista/drivers/raidutil.rar
4.Remote control manager
http://www.rabayjr.com/vista/drivers/rcm.rar
5.Toshiba disk creator.
http://www.rabayjr.com/vista/drivers/disccreator.rar
6.Picture enhancement utilily.
http://www.rabayjr.com/vista/drivers/picenhan.rar
You can select your desired screen brightness and the monitor input settings:
monitor-in (rca normal or S-VHS plug in) when using your Qosmio as a monitor in for your VCR, DVD, Playstation, etc.
For using TV as monitor-in you also can switch from NTSC to PAL video system.
For screen brightness: This adjust affects the image of your DVD player software or when watching your DVD via media Center 2005
http://www.rabayjr.com/vista/qosmiopicenh.jpg
After installation this utility appears into the Toshiba Assist Window, on Optimize category as shown in the picture above.
As the Toshiba Media (Top) buttons are not working by now, you can use the HotKey (Fn+4) which is working 100% , to toggle from Normal screen input(4:3 aspect)
to wide screen input (16:9 aspect).
Press the Fn+4 once and your monitor video in is 4:3 mode, press again and the monitor video in is 16:9 mode, press once more and the image returns to your lcd normal. screen.
7. SRS Audio Sandbox utility (enhancement) for you soundmax audio experience
The sandbox will allow you to process any audio in your system with one of three SRS technologies:
WOW HD: Provides enhanced width, bass and definition for music sources.
TruSurround XT: Virtualizes multichannel content for listening on two speakers,
with post-processing enhancements.
CX Xtract: Provides enhanced multichannel virtualization by combining TruSurround XT
with Circle Surround II.
link to download:
http://www.rabayjr.com/vista/drivers/srs.rar
8.Toshiba value added package:
About the Toshiba Value added package for the G30, you can install it on the G20, but only some of the items, otherwise you will have conflicts with Windows mobility center.
Do not install the Toshiba energy control. Designed only for the G30 model.
It Maintains the Windows mobility center funcionality and the Toshiba Buttons (FN + F1, F2, F3, etc...)will be OK.
9.Toshiba extended Tiles for Windows mobility Center.
http://www.rabayjr.com/vista/drivers/tileswmc.rar
10.Microsoft photo info.
http://www.rabayjr.com/vista/drivers/photoinfo.rar
OBS: All the downloads are directly from my FTP server. 100% secure. No Virus. No spywares
Francisco

Qosmio G20: Need Vista Toshiba Common Modules & Utilities

I have a Qosmio G20 and have recently upgraded to Windows Vista - Home Premium
I need to update my Common Modules Driver and Toshiba Utilities - can anyone help me?

Hi Paul
Unfortunately, you will have no success to find Toshiba Vista drivers or utilities for Qosmio G20!
It looks like Toshiba has released only single common Vista drivers like Wireless Lan Driver, Bluetooth Stack, etc. These drivers are not especially designed for G20 series but you can use it on notebooks with the same WLan card or BT card.
However, the Toshiba Vista drivers were not released for Qosmio G20 or F20.
Did you check this?
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20494&tstart=195
The FranciscoJr is a god father of Vista on Qosmio G20 ;)
Recommend checking this useful, fantastic thread.
Best regards

Need new GPU cooling module for Qosmio G20

Does anyone know where I can get a new fan for the GeForceGo 6600 graphics on my qosmio G20?

Why do you need a new cooling module?
How ever, I agree with Jaba, an ASP will help you and change the cooling module. You will find an ASP on this website => Support & Download => Find an autohorised service provider.
Regards

Qosmio G20-139: Need to buy D-video to component or scart cable

Hi i'm trying to find a D-video to component or scart cable(as lost mine one)....for my qosmio G20-139.....cannot find one anywhere in the UK..... have emailed Toshiba but no reply!!...have found loads of DVI-D Video Cable but don't think this is the Right Cable........any help pleaseeeeeeee......as i'm no Expert!!!!!

Hello
Please contact one of authorized service partners in UK. They can order one for you. Addresses and phone numbers you can find under http://eu.computers.toshiba-europe.com > Support & Downloads Find an ASP.
Good luck!

Need advice on buying a Qosmio G20-126

Hi everybody,
I was just passing by a local electronics shop in a mall when I found a Toshiba Qosmio G20-126 on sell for $ 1361.47. And those are the specifications for the laptop:
Processor: Intel Pentium Centrino M770 / 2.13 GHz Data Bus Speed: 533 MHz, 2MB Cache memory
Ram: 2 x 512 MB DDR II SDRAM - 533 MHz
Storage: 2X Hard Drive: 100 GB - Serial ATA-150 - 5400 rpm
CD-ROM: DVD±RW (+R double layer) / DVD-RAM
Card Reader Type: 5 in 1 card reader, Blue Tooth, IR, Remote Control
Display Screen: 17" TFT active matrix, Max Resolution: 1440 x 900 ( WXGA+), Colour support: 24-bit (16.7 million colours), TruBrite
Video card: 128 MB NVIDIA GeForce Go 6600 - PCI Express x16
I have a LG-P1 laptop and That??s is specifications:
Processor: Intel Core Duo L2400 1.83 GHz ( Dual-Core ), 2MB Cache Memory
Ram: 512 MB DDR II SDRAM - 667 MHz - PC2-5300
Stroge: 80 GB - 4200 rpm
CD-ROM: Double Layer DVD-Writer
Display Screen: 15.4" TFT active matrix 1280 x 800 ( WXGA )
Card Reader 5 in 1, Bluesoul, A Fingerprint Reader, 5.1 CH sound, SRS sound.
Video Card: ATI Mobility Radeon X1400 (256 MB)
Now, the sell??s man told me that all the parts in the G20 are dedicated and exactly similar to desktop parts. Meaning, that I can upgrade the laptop normally as if I am upgrading a Desktop (Processor, Sound Card, Video Card, Ram). Is that True? And If so, Can I Replace my CD-ROM with a H-DVD one as well? Finally Do you recommend me to buy the G20 or stick with my P1 and why?
Please help, I waiting for your replays.
Regards,

Oh man, wasnt I clear enough? Its a little bit annoying, two people already told you:
You cannot upgrade ANYTHING on that machine. NOTHING!
You can just put more RAM into it. But thats the end of line. No VGA, no CPU etc...
And if the vga card is REALLY dedicated, then where would you try to get another if no one excepting toshiba provides just 1 model of that vga especially for that machine.
You have to dig it that a notebook is ABSOLUTELY NO DESKTOP and is NOT UPGRADEBLE.
That means no replacing of parts like in a desktop.
Sorry for my rough words, but I thought it was clear and I am not writing in chinese. :)
Greets

Qosmio G20 : D-video pinout ?

Hi Qosmio users, I've been trying to output D1, D2, D3, D4 resolutions on a HD-ready LCD TV with no success. I can output standard PAL through the D-out plug at the back of the Qosmio, using the provided D-to-Scart cable, but when I output 480p, 720p, 1080i,... the LCD TV is out of sync.
I know the TV is able to receive 1080i signals, I have tested it with a HD camera video recorder (using component outputs).
So, I have checked the D-to-Scart cable and found that it only carries a composite video signal (plus the left and right audio signals).
Some people have suggested to buy a D-to-component cable in Japan, but I can't understand how it could work because it seems the D-out plug on the Qosmio is not the standard D4 connector as described on http://en.wikipedia.org/wiki/D4_video_connector
(there's no audio signals on these D4 connectors).
So, I'm looking for the pinout of the Qosmio D-connector...
Also, I am wondering if the Japanese D1, D2, D3, D4 analog HD standards are supported by european HD-ready TVs ?
Thanks for any answer,
Fabrice

Hey Fab,
> I've been trying to output D1, D2, D3, D4 resolutions
> on a HD-ready LCD TV with no success. I can output
> standard PAL through the D-out plug at the back of the
> Qosmio, using the provided D-to-Scart cable, but when
> I output 480p, 720p, 1080i,... the LCD TV is out of
> sync
First of all, what cable did you use for this test?
The D-video to scart cable provided with euro Qosmios is absolutely unable to do this, so it's no big surprise it didn't work. the Component signal is just not transmitted via Scart input on european TVs.
But that's not all..
> So, I have checked the D-to-Scart cable and found that
> it only carries a composite video signal (plus the
> left and right audio signals)
Yeah that's right, unfortunately, read below...
> Some people have suggested to buy a D-to-component
> cable in Japan, but I can't understand how it could
> work because it seems the D-out plug on the Qosmio is
> not the standard D4 connector as described on
> http://en.wikipedia.org/wiki/D4_video_connector
> (there's no audio signals on these D4 connectors).
You're absolutely right. It seems Toshiba Europe decided that we, european users, would have no use for the Component output so they made the D-Connector just a plug to output rotten composite through the "D-video to scart cable".
If you bought your Qosmio G20 in the US or in Japan, it would be able to output Component. (cables supplied with US&JP qosmios are the "D-connector to component" type.)
Even if the nVidia driver gives us the option for D1 -D4, the plug on our european units apparently just won't allow it.
Talk about misleading advertising, or worse, the marketing guys have strictly no idea what they're talking about.
I do have a Euro Qosmio, the E10, with D-connector plug and I have bought the "D-connector to Component" cable in Japan. I have no TV or HD screen to test it yet, but I strongly assume it will not work for the reason stated above.
It seems the D-connector plug output has been "adapted" for european needs (read: its original purpose has been totally destroyed).
What IS THE POINT of using this output plug for conveying a composite signal is beyond me. Especially since we already have S-VHS output which is fantastic compared to composite. No, i think Toshiba did this so that mr n00b-i-don't-care-about-quality makes it work easily on his TV by just having to plug the scart for both video + audio.
Very, extremely sad.
Our only hope would be that the 4 signals (1 ground and 1 composite for video + audio left, audio right and ground for audio (prolly shared with ground for video)) leave some of the pins free for the component signal output.
I have yet to test on HDTV but i would be extremely surprised if it worked.
I would *love* anyone to prove me wrong on that one.
Later,
Alcahest
Edit: check this out.
From : http://uk.computers.toshiba-europe.com/Contents/Toshiba_teg/EU/WORKSHOP/files/EXP-2005-04-Qosmio-Screen-EN-EMEA.pdf
---> http://videoff7.free.fr/qos.gif :(
Message was edited by: Alcahest

Qosmio G20 AC Adapter damge - need IC chip part number

Similar Messages

Maybe you are looking for