Qosmio G20: Logitech quickcam driver doubles all media speed

When I install the Quickcam Fusion driver on my Qosmio G20, the weirdest thing happens...
All the sounds/video on the computer (music, mic, video, etc.) seems to get doubled in playing speed, how in the world is this possible??
Is the Quickcam Fusion driver not compatible with the G20?? Something must have gone completely wrong.
It all fixes itself when I remove the cam driver again...
I really need help with this one!

It looks like the quickcam driver cased this very strange behavior
Why you dont contact the cam manufacture and ask for the support.
Maybe the guys know more about this problem and offers any driver updates or quickfixes.

Similar Messages

  • Powerbook g4 (FW800) Optical drive ejects all media

    I think this question has been there many times, but could not found a decent answer.
    Problem is that my optical drive (superdrive) does not mount any media, when I put disc (any disc) in it reads it for a while and spits it out... What to do?
    Is my optical drive an ex drive, broken, dead? Or is there some setting corrupt or what`
    thanks

    I have had to replace 2 Super Drives and no it was not at all related to any software upgrades. I am quite frankly ticked that I have such an expensive laptop, and have had to replace 2 drives in 18 months. First one was under warranty second of course not. I replaced it with a non OEM, rather with a PIONEER DVD-RW DVR-K05. I would rather try my luck with something new, as opposed to the the same drive that has broken twice.
    First time was the same as yours, second was an electrical issue which was causing the drive to continually eject. I checked with the repair person, to determine if I was causing the problems. I have no bends in the drive and there were no outward appearances of damage. I travel everyday with my laptop, it is a work/personal laptop. I use a rolling laptop bag, and recently travelled internationally with it and thought perhaps the jostling and vibration. But the first drive went out prior to me using it as a work laptop, did not travel much with it then. But with new job, I am everywhere rolling the laptop in a roll bag (so much easier to travel with)!
    Michelle

  • Qosmio G20 - Common Modules Driver blocked by VISTA

    I read this article:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20494&start=0&tstart=0
    I still have a problem: at Vista's start-up I see a popup about TOSHIBA Common Modules Driver blocked due incompatibility
    How can I uninstall it?
    The registry seems ok, I found one only key and I have deleted it

    >...how to find campatible drivers
    That's right but please don't understand word compatibility wrong. Drivers offered by Toshiba download page are definitely designed for certain model and also tested.
    Are these compatible drivers tested? Who can guarantee the functionality if you use them?
    As I can see you have problems now. So, in my opinion you should contact this source and ask for help. This third part source offers compatible and obviously well working drivers, tools and utilities. ;)
    Anyway, have you tried to reinstall VAP designed for Qosmio G30? Maybe it will work well.
    Just for info: VAP is package of 7 different tools and one of them is Toshiba Components Common Driver. Try it.
    You know, I have noticed that Toshiba has offered Vista support for some old WXP notebooks and also new BIOS update for Vista. Is BIOS version on your Qosmio 1.40?

  • Updating firmware on Qosmio G20 - no target drive?

    Hello.
    I´ve tried to update the latest firmware on my G20 and when i download the file and try to open it i got this message : "the target drive is not connected"
    hmmm..that´s strange ain´t it...
    How can i target then?
    thanks in advance

    I know what the problem is. :)
    You downloaded the firmware for a DVD-drive and not for a notebook. You have to download a BIOS for your machine.
    Download it here:
    http://www.toshiba-tro.de/subpage/bios.html
    Hope you will have success. ;)
    Greets

  • Qosmio G20-102: RAID problem when installing windows xp media center

    First I didn't find the raid driver for my qosmio. I tried another Qosmio G20's RAID driver but when it reachs the stage when I ask windows to format the C driver it shows me an error. It says that it finds an error in the file KR10N and it ends there.
    please help me and thank you.

    Hi
    It seems that the Qosmio G20-102 belongs to the PQG20E series.
    Searching on the Toshiba European driver page I found the RAID driver v1.03.0008 for Windows XP MCE (can be used also with XP Pro).
    You will need an external USB FDD to include this driver into the OS.
    But note; after the RAID driver installation you shouldnt format the HDD or create a new partition because this will delete the RAID driver from the HDD and the OS installation fails!
    I hope I could help you would also appreciate a feedback ;)
    Best regards

  • Pinnacle installation on Qosmio G20

    Im trying to install the pinnacle studio 9 on my Qosmio G20, but when u double click on the setup.exe, the arrow with the hourglass starts turning, it waits about 5 secs, as if the install wizard is about to launch, but then just does nothing. Theres nothing wrong with the install product, as ive just tested it on my other notebook,and works perfect! Any suggestions??
    Thanks in advance!

    Hi
    I hope that you use original product. If you check the content of this CD there is probably many different folders. Are you able to click into any of these folders? Can you see the content of whole CD?
    Try also to check task manager and all running processes. Maybe is the some process already started and it will not start second time. Restart the unit and try it again.
    The latest solution is pinnacle support. Toshiba has nothing to do with usage of non Toshiba applications.

  • Qosmio G20-126 where can i buy DVD Super Multi drive (Double Layer) ?

    Hi,
    Can someone help me and tell me where can i buy DVD Super Multi drive (Double Layer)
    DVD model: UJ-846-C flop in 12.7mm
    Qosmio g20-126
    Thank you

    Hi
    Did you try to search for some online dealers who provide such part?
    Additionally you could contact an Toshiba authorized service provider in your country to order such part.

  • Qosmio G20-117: Bluetooth with Logitech

    Got a Qosmio G20-117 english version Running windows MCE 2005
    Just bought a new logitech MX5000 keyboard mouse set for use with it and i have found out that the bluetooth module inside needs a different driver or something for the whole of the logitech settings to be able to work. The mouse and keyboard connect using the supplied logitch bluetooth adaptor however this is a bit pointless if i already have bluetooth inside! The mouse and keyboard can be connected by the qosmio but the settings are not accessible.
    Would appreciate any assisstance thanks

    Have you installed Toshiba's latest Bluetooth Stack?
    http://www.toshiba-tro.de/tools/bluetooth/40001/40001-ww.zip
    It is needed to increase Bluetooth compatibility with newer hardware, maybe it works for you ;)
    more info: http://aps.toshiba-tro.de/bluetooth/pages/driverinfo.php?txt=bltstack-40001-notebook
    Later,
    Alcahest

  • Audigy problem with Logitech QuickCam Fusion Driv

    The new Logitech QuickCam Fusion camera driver software somehow causes the 4. and 5. to get messed on my Windows XP (sp2) computer.
    I spent a long time tracking the problem down including swapping out the Audigy itself, testing speakers on another computer, reinstalling creative drivers, bios, board drivers, etc. It didn't dawn on me that the Logitech driver would ever cause that kind of problem, so it was the last thing I checked.
    It causes the front speaker sounds to come out the rear speakers and the rear and center channels to get whisper quiet. And, all sounds come out of all of the speakers somewhat.
    Removing the QuickCam Fusion web camera driver instantly corrects the problem.
    I would like to know if others who have the Audigy, Audigy 2, and X-Fi have the same problems after installing the Logitech Fusion Web Cam.
    Could one of the Creative forum monitors kindly would check out this problem?
    Thanks
    JN

    One thing you might try to see if this corects the problem is to look in your control panel, and then sound, and there have you checked to be sure that the sound card and not the Logtiech Quick Cam is the default sound device? I know that some of those devices have their own microphone and codecs and those become the default after you install them. It will make the camera the default sound device. Sometimes they even plug into your "line-in" though not always.
    Cheers,
    jmacguire

  • Qosmio G20 - Unable to initialize 320GB drive - JBOD to 1RAID-0

    Hello, fellow Toshiba users,
    at first I apologize if this question has already been answered, but I failed to find existing answers to my problem.
    A colleague of mine has a Toshiba Qosmio G20 with two 80 GB disk drives. Large 17 inch "surf-board-sized" laptops aren't my cup of tea, but the Qosmio served him pretty well.
    We tried to upgrade both aging hard drives in his laptop. Having considerable experience in replacing the laptop drives I didn't expect any particular surprises, but I was wrong.
    We tried to replace the original drives
    bay 1: 80 GB Fujitsu drive, system
    bay 2: 80 GB Fujitsu drive, data, RAID off
    with the new ones
    bay 1: 320 GB WD Scorpio drive
    bay 2: 320 GB WD Scorpio drive.
    The G20 BIOS is v1.30, the latest version. It recognizes the new drives' - but marking one of the new drives as 1RAID-0 fails. After trying to "initialize" the 320GB drive in bay 1 as 1RAID-0, on the third page of G20's BIOS, there is some disk activity, however the drive remains in JBOD mode.
    Being unable to mark the 320 GB drive as 1RAID-0, I am unable to use the 320GB drive as a system drive.
    If the original system drive is cloned to a new 320GB drive it fails to boot. Booting XP *starts* but subsequently fails with STOP 0x7B - in other words, the infamous INACCESSIBLE_BOOT_DEVICE blue screen when Toshiba RAID driver is loaded during Windows bootup.
    Installing windows from plain-vanilla CD, of course with slipstreamed Toshiba driver, remains impossible. The Windows setup only "sees" the drive in bay 2.
    When the system drive is put in secondary bay and G20 is booted from it, Windows XP starts successfully. However, the drive in bay 1 is inaccesible from Windows, it remains offline in Toshiba's RAID console. So booting from drive in bay 2 isn't an option, too.
    A similar problem where the owner failed to install a 200GB system drive is described here
    Link: http://tinyurl.com/38wokw
    That owner, however succeeded in installing a 100GB drive and we resorted to 80GB drive as a system drive, and upgrading only the drive in bay 2 to 320 GB.
    I understand what happens when the drive is "initialized" in BIOS. Toshiba's BIOS only marks the drive as 1RAID-0 and it fails on 320GB drive. I'll refrain from stating my opinion on such practice.
    My question is - if it is possible, how to *manually* mark the 320 GB drive as 1RAID-0?
    Using a hex editor, dd or something similar is no problem. A partial answer would also be to know the largest drive size that *can* be successfully marked as 1RAID-0 in G20's BIOS.
    Thanks in advance.

    Hi
    Im not 100% sure what could be wrong by I presume the 320GB HDD size could be too large!
    How about the 100GB or 120GB HDDs?
    I think you should test it because usually the most of the BIOS supports an HDD size limitation and therefore not all sizes are supported.
    But note; using the 1RAID-0 (striping) configuration, the size seen by the OS is twice that if the smaller of the two HDD units in the RAID configuration. Using the RAID-0 all data on both disks will be lost, even if only one of the two disks drive fails.

  • Driver installation on Qosmio G20

    I've a G20 machine (bought in Japan) and I want to install my copy of XP pro.
    Setup of XP works fine until the end, then I start to install the driver and the software as suggested by Toshiba:
    acoustic silencer V1.00.005A
    assist V1.02.00_TINASSIST_NUER20MA
    --> NOT INSTALLED atheros wlan 802.11ag/g utility V3.1.2.19I123
    --> NOT INSTALLED bluetooth monitor V2.0(B20041111)
    toshiba bluetooth stack V3.3.10.01 BUILD20041209
    texas instruments pcixx21 flashmedia driver V1.0.2.1 INSTALLER BUGFIX
    intel(r) chipset software installation utility V6.1.0.1008
    common modules V6.02.04
    configfree V5.00.48
    controls V3.16.2400
    display device change utility V1.6.0.0
    nvidia geforce go 6600 display driver V6.14.10.7118
    hotkey for display devices V2.8.0.0-00-XP
    hotfix for "cumulative security update for ie" Q834707
    hotfix for "issue in hyperterminal could allow code execution" KB873339
    hotfix for "issue in windows kernel and lsass" KB885835
    hotfix for "issue in wordpad could allow code execution" KB885836
    hotfix for "windows firewall my network (subnet) only" KB886185
    --> NOT INSTALLED hardware (dep)-enabled computer may unexpectedly quit after you resume from standby or from hibernation in windows xp service pack 2 Q889673
    toshiba software modem SM214710AD2
    intel(r) pro/100 ve network connection V8.0.1.1
    pc diagnostic tool V3.1.0
    picture enhancement utility V2.7.0.2
    power saver V7.05.04
    toshiba raid driver V1.00.0013 FOR NUR20
    raid utility V1.2.0.25
    sd memory card format V2.0.2.1A
    sd secure module V1.0.2
    soundmax integrated digital audio V5.12.01.5240U
    --> NOT INSTALLED sun java 2 runtime environment V1.5.0
    touch and launch V1.2.7.0
    alps pointing-device driver V6.0.304.6
    touch pad on/off utility V2.05.00
    utilities V4.20.26
    virtual sound V1.00.05UPDATE
    wireless hotkey V2.0.0.5
    atheros ar5001x mini pci wireless network adapter V3.1.2.45
    intel wireless lan b/g driver V9.0.1.9
    zooming utility V2.0.0.20C
    In addition to the above I install the Tvtuner driver, the DVD RAM driver, the Maximizer utility and didn't install the Atheros 802.11 driver cause it seems the machine has an Intel network card (is it right?)
    But when I came at the end of all this procedure the system starts and works fine the first time but when I reboot the machine the hourglass goes for ages and I need to reboot in safe mode using task manager.
    I have the feeling the problem is related to the Configfree utility or either the WIFI.
    I tried to uninstall the Configfree but the problem is still there!
    Can anyone out there help me???!!

    Hello
    It is not easy to give you some precise information about units from Japan. I am not familiar with units produced in Asia and it will be interesting to know which components are built in.
    The only thing that I can recommend you is to check Installations instructions http://support.toshiba-tro.de/tools/qosmio/g20/xp/install-qog20-xp-na.zip and install all stuff listed there and be careful about installations order.
    Bye

  • Is it possible to boot from usb dvd-drive on Qosmio G20

    I have QOSMIO-G20. I'd like to boot from the usb dvd-drive, but in bios i can use only external Floppy-drive :( is it possible to unblock bios or maybe to upgrade it that i can boot from the external dvd?

    No. its not possible;
    You can boot only form HDD, ODD, UDB FDD (floppy disk), LAN
    Greets

  • How do I connect my external hard drive with all of my digital media to my Apple TV network and make it accessable 24/7?

    How do I connect my external hard drive with all of my digital media to my Apple TV network and make it accessable 24/7?  I have the latest Apple TV, ipads, iPhones as well as a solid HP Windows machine all on my home network.  Is there a way that I can connect my hard drive to my receiver or Apple TV directly so that the digital media is available on my network 24/7 rather than have it connected to my computer and available through Home Share which never works anyway??

    Sorry it's all done through iTunes.
    The following article(s) may help you with home sharing.
    Troubleshooting Home Sharing
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

  • JMF crashed with Logitech QuickCam Pro for Notebook using latest driver.

    JMF crashed with Logitech QuickCam Pro for Notebook using latest driver
    I can't register the webcam in JMF. WinXP crashed with Blue-screen-of-dead.
    The crash occurs on installation of JMF when the installer tries to detect my capture devices.
    Windows also crashes when i open the JMF Registry Editor and tell it to search for my capture devices.
    I use a QuickCam Pro for Notenooks with driver version 11.80.1065.0000 on Windows XP with JMF 2.1.1e.
    PS: I can use JMF to connect to other brand's webcam.
    So, how to solve it?

    So, how to solve it?JMF apparently doesn't work with that camera...so if you want to install JMF, you should unplug your Logitech cam. If that doesn't work, uninstall it.

  • Downloading and Installing Tuner driver - Qosmio G20

    Excuse my ignorance, but I have downloaded a zip folder from the Toshiba site containing files for installing a tv tuner driver(date last modified 11.24.05) for my Qosmio G20 - 139(PQG21E-01500NEN). The instructions say: '...check the contents of the zip file for installation details', but I cannot find/recognise a file that offers such instructions (there are a few I've clicked on that offer up a warning about opening files, so, being a novice in these things, I chose not to continue).
    Can anyone advise me upon what file contains installation instructions, or how I should go about installing this driver?
    Thanks in advance for any help given.

    Hello Feliks. Thank you for your reply. To try and answer your questions:
    1) I am not really sure the TV Tuner must be installed. I, in my innocence, thought it might be an update.
    2) Under Device Manager entries (and thank you for telling me where to look!) there is a listing: TOSHIBA PCI DVB-T/Analogue Hybred Tuner.
    I am presuming this is the entry that relates to the TV Tuner. I tried updating the driver from there (just out of interest) by entering the path to where the dowloaded driver resides, and the message I got was (paraphrasing) 'No newer version of the driver already installed found'
    So, perhaps I've just been leading myself (and those who have tried to help) up the garden path.
    Once again, thank you for your help.

Maybe you are looking for