Qosmio G20 - Missing software discs

I have a Qosmio G20 that has had the hard drives wiped due to a virus.
To reinstall software a disc is required that I seem to have misplaced. Apparently Toshiba no longer keeps a copy of this disc as it is an old model. I was wondering if anyone could help me out with this problem? I think it is a software recoverd dvd-rom as according to the user manual this is the only software disc that came with the computer.
Thanks

Hi
Do you mean a software disk where you can find additional software or the disk with the OS?
Normally for this older notebook you can get a recovery disk from an authorized service provider. It takes only few minutes to ask for this.
Furthermore on the Toshiba website you can search for the nearest authorized service provider.

Similar Messages

  • Qosmio G20: Can't read Roco brand DVD+RW disc

    I have Roco brand 8x DVR+R and the Q G20 wont recognize the disc. I think it may be due to the Brand Roco since the Sony DVD+RW works fine except I cant save the video from the Sony to my HD.
    Any suggestions?
    Thanks in advance.

    I have solved this problem using Sonic Record Now!
    I was able to copy my DVD using the Sonic Record Now that came with my Qosmio G20 to a Roco Brand DVD +RW. Once I made a copy of the orignal DVD, it did not work until I closed the Record Now and opened my media player. I could open using Real, Windows Media Player and WinDVD. None of these programs could read the DVD prior to recording and they could not format the disc.
    Thanks

  • Qosmio G20-115: TV Tuner is missing 1 or 2 channels

    Hi
    Our qosmio g20 tv tuner is missing 1 or 2 channels, I'd understand if it doesn't get the channel with a bad reception on our normal tv but the channel it's missing is one of the clearest one.
    I've done the scan twice and still no luck.
    We have an antennae on the roof, and its been checked by a proffesional person and came up in perfect order.
    Anyone got any ideas on how to solve this issue?

    In this forum,I can see a lot of people that have problem with the G20 tv reception.
    I can look all the English channels but the quality is very poor.
    If you use the G20 as a desktop computer like me,forget the G20 tv tuner and buy a (£35/40) freeview box.
    I receive marvelous images from a satellite/free box with a parabolic antenna, via 'S-Video-in port'
    and marvelous images too,from a 'freeview terrestrial digital box' with a very normal antenna, via 'Monitor-in port'
    If the antenna work fine with digital transmissions that are notoriously more difficult
    to receive, it would must to receive fine the analog transmissions and, in my case, it's true for a normal television,
    but it's not true with the G20 TV card!
    Is possible that you need a 'Scart to phono' adaptor, depend which exit has your top/box.
    I can jump from one top/box to another by using the utility:
    "All Programs/TOSHIBA/Utilities/Picture Enhancement Utility"
    then I click to: 'Monitor input setting' and I can choose: "Monitor-in" or "S-Video-in".
    The G20 is a wonderful machine with a wonderful screen, but in my opinion it has a low tv card.
    Bye

  • Qosmio G20 Vista drivers? Not needed to install Windows Vista

    Hello,
    I am new at this forum. My name is Francisco and I live in Brazil. I own a Toshiba Qosmio g20_105 and it is running Windows Vista Ultimate EN RTM 6000 without problems.
    To do this, you must perform a fresh install of Windows Vista. The drivers for network (Intel PRO100),for audio (Soundmax), for TV (Toshiba PCI Tuner), modem (toshiba modem), Alps pointing device are installed directly from microsoft. You must install Toshiba nvidia display driver, Toshiba Bluetooth (monitor and stack), Toshiba texas flash media driver, toshiba RAID (driver and utilities), toshiba remote control manager and ConfigFree for Windows Vista.
    You must have the Toshiba RAID drivers to install from the windows Vista DVD. Otherway, Windows does not recognize Toshiba RAID 0 and RAID 1.
    Below some pictures of my G20 Desktop screen:
    http://www.rabayjr.com/vista/myqosmiog20screen1.jpg
    http://www.rabayjr.com/vista/myqosmiog20screen2.jpg
    http://www.rabayjr.com/vista/myqosmiog20screen3.jpg
    And here is an example of using deskscapes animated backgrounds with Windows Vista, called dreamscene.
    It is in paused mode
    http://www.rabayjr.com/vista/myqosmiog20screen4.jpg
    To perform a fresh install of windows Vista:
    Please, download the Toshiba RAID drivers from here:
    http://www.rabayjr.com/vista/drivers/raid.rar
    1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
    2. Insert your Microsoft Windows Vista Edition Bootable DVD.
    3. Power on your computer and press F12 to display the boot menu.
    4. Choose the option to boot from the CD/DVD drive.
    5. On the first setup screen, choose your language options then press "Next".
    6. Press "Install Now".
    7. Type in your Product Key then press "Next".
    8. Accept the license terms by checking the box then press "Next".
    9. When asked "What type of installation do you want", press "Custom (advanced)".
    10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
    11. Browse to the location you have copied the RAID drivers to then press "OK".
    12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
    13. Make sure the TOSHIBA RAID driver is selected then press "Next".
    14. Continue the installation of Windows Vista as normal.
    Now you will need the Toshiba drivers for your Qosmio G20:
    See the Device manager info:
    http://www.rabayjr.com/vista/qosmiodrivers1.jpg
    Drivers:
    1. SD memory controller
    http://www.rabayjr.com/vista/drivers/SD_memory.rar
    2. Bluetooth monitor and stack
    http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
    http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
    3. Nvidia display driver GeForce Go 6600
    http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
    4. Texas FlashMedia controller
    http://www.rabayjr.com/vista/drivers/flasmedia.rar
    And finally the Toshiba utilities:
    Toshiba Configfree
    Toshiba Assist
    RAID utilities
    Remote control manager
    Toshiba SD Memory utilities
    That's it...
    So I must tell to you that Toshiba Qosmio G20 is Windows Vista Ultimate capable, indeed.
    Hope this helps people who need and want to install Windows Vista Aero on their Qosmio G20 machines.
    Message was edited by: FranciscoJr

    UPDATED POST: On March 08, 2007
    This is a step by step guide for those of you with problems to get Windows Vista functional on your G20 Qosmios
    Use a Windows Vista English Version RTM Ultimate 6000 DVD for installation.
    1 Backup your personal files and important data to a removable device, CD, DVD, flashmedia, pendrive, etc...
    2.Check your Qosmio player installation. if nedeed, reinstall it with the latest version (multilanguage), posted on Toshibas site (download drivers section).
    3.Download and copy the Toshiba RAID drivers to a removable media
    Please, download the Toshiba RAID drivers from here:
    http://www.rabayjr.com/vista/drivers/raid.rar
    4.To perform a fresh install of Windows Vista, Follow the steps below
    -1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
    -2. Insert your Microsoft Windows Vista Edition Bootable DVD.
    -3. Power on your computer and press F12 to display the boot menu.
    -4. Choose the option to boot from the CD/DVD drive.
    -5. On the first setup screen, choose your language options then press "Next".
    -6. Press "Install Now".
    -7. Type in your Product Key then press "Next".
    -8. Accept the license terms by checking the box then press "Next".
    -9. When asked "What type of installation do you want", press "Custom (advanced)".
    -10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
    -11. Browse to the location you have copied the RAID drivers to then press "OK".
    -12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
    -13. Make sure the TOSHIBA RAID driver is selected then press "Next".
    -14. Continue the installation of Windows Vista as normal.
    5. Go to Microsoft update and download all important updates available. If you wish you can install your native language, if other than English, from the Microsoft site.
    let Windows install all the drivers found for your Qosmio G20.
    6. Reboot your machine and follow with the steps below.
    DRIVERS YOU MUST INSTALL:
    1. Alps pointing device driver (This is from Alps and working fine with your Qosmio G20)
    http://www.rabayjr.com/vista/drivers/alpsdriver.rar
    http://www.rabayjr.com/vista/qosmioalps.jpg
    During the installation, Windows will complain that you are installing an early device driver. Do not attempt to this, Install it anyway.
    This is because the Windows driver for this device is originally installed with a more recent date and version from that you are trying to install.
    But the driver posting here is the correct from the Alps for your Qosmio g20.
    2. Bluetooth monitor and stack
    http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
    http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
    3. Nvidia display driver GeForce Go 6600
    http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
    To install the nvidia 97.52, you must do it manually:
    open the Device manager
    look for the Video adapter/nvidia Gforce go6600
    Driver update options
    Look for a driver in computer
    Choose a list of device drivers in computer
    With disc...
    Lool for the place you've extracted the nvidia 97.52.rar
    Find the nvts.inf and open it
    You will come to the following screen:
    http://www.rabayjr.com/vista/qosmionvidiainstall.jpg
    From a list choose your video card (go6600) and install it.
    If you think it is difficult, please see the VIDEO Nvidiainstall.avi:
    http://www.rabayjr.com/vista/drivers/nvidiainstall.rar
    After the extraction, play it with Windows media Player
    4. Texas FlashMedia controller
    http://www.rabayjr.com/vista/drivers/flasmedia.rar
    5.SoundMAX integrated digital audio. Driver 5.12.1.5410
    http://www.rabayjr.com/vista/drivers/soundmax5.12.1.5410.rar
    run the setup.exe and at first remove the driver you have installed on your Qosmio G20.
    reboot the computer
    Run the setup.exe again and install the new driver. At some install point, Windows Vista will need a confirmation, if you trust Analog devices incorporated to goes on..
    http://www.rabayjr.com/vista/qosmiosoundmaxinstall.jpg
    Continue with the installation and after finishing the process, test the functionallity of the new driver
    OR
    If your G20 model is using the Sigmatel HD audio chipset, so you must install other driver than the Soundmax integrated digital audio
    It is the SigmaTel HD Audio Driver for Windows Vista Version: 6.10.0.5324
    link:
    http://www.rabayjr.com/vista/drivers/sigmatelhd.rar
    6.Intel PRO Wireless 2200BG Vista version 9.1.0.115, including the Intel chipset identification utility.
    http://www.rabayjr.com/vista/drivers/intel_wireless.rar
    And for the Utilities you can download them from here:
    1.Toshiba Configfree
    http://www.rabayjr.com/vista/drivers/configFree.rar
    2.Toshiba assist
    http://www.rabayjr.com/vista/drivers/assist.rar
    3.Raid utilities
    http://www.rabayjr.com/vista/drivers/raidutil.rar
    4.Remote control manager
    http://www.rabayjr.com/vista/drivers/rcm.rar
    5.Toshiba disk creator.
    http://www.rabayjr.com/vista/drivers/disccreator.rar
    6.Picture enhancement utilily.
    http://www.rabayjr.com/vista/drivers/picenhan.rar
    You can select your desired screen brightness and the monitor input settings:
    monitor-in (rca normal or S-VHS plug in) when using your Qosmio as a monitor in for your VCR, DVD, Playstation, etc.
    For using TV as monitor-in you also can switch from NTSC to PAL video system.
    For screen brightness: This adjust affects the image of your DVD player software or when watching your DVD via media Center 2005
    http://www.rabayjr.com/vista/qosmiopicenh.jpg
    After installation this utility appears into the Toshiba Assist Window, on Optimize category as shown in the picture above.
    As the Toshiba Media (Top) buttons are not working by now, you can use the HotKey (Fn+4) which is working 100% , to toggle from Normal screen input(4:3 aspect)
    to wide screen input (16:9 aspect).
    Press the Fn+4 once and your monitor video in is 4:3 mode, press again and the monitor video in is 16:9 mode, press once more and the image returns to your lcd normal. screen.
    7. SRS Audio Sandbox utility (enhancement) for you soundmax audio experience
    The sandbox will allow you to process any audio in your system with one of three SRS technologies:
    WOW HD: Provides enhanced width, bass and definition for music sources.
    TruSurround XT: Virtualizes multichannel content for listening on two speakers,
    with post-processing enhancements.
    CX Xtract: Provides enhanced multichannel virtualization by combining TruSurround XT
    with Circle Surround II.
    link to download:
    http://www.rabayjr.com/vista/drivers/srs.rar
    8.Toshiba value added package:
    About the Toshiba Value added package for the G30, you can install it on the G20, but only some of the items, otherwise you will have conflicts with Windows mobility center.
    Do not install the Toshiba energy control. Designed only for the G30 model.
    It Maintains the Windows mobility center funcionality and the Toshiba Buttons (FN + F1, F2, F3, etc...)will be OK.
    9.Toshiba extended Tiles for Windows mobility Center.
    http://www.rabayjr.com/vista/drivers/tileswmc.rar
    10.Microsoft photo info.
    http://www.rabayjr.com/vista/drivers/photoinfo.rar
    OBS: All the downloads are directly from my FTP server. 100% secure. No Virus. No spywares
    Francisco

  • TV-out problem with a Qosmio G20 - Scart option disappeared

    I have a problem with my video board and its driver.
    I have got a Qosmio G20 with a Nvidia GeForce Go 6600.
    Yesterday when I boot my notebook i have seen that some setting were disappeared.
    I have tried to connect the pc with the TV in the way described here: http://support.toshiba-tro.de/kb0/TSB4A00TK000MR01.htm
    but the option scart in the tv format menu was disappeared and it was disappeared in bios setting too.
    I have tried to reinstall the display driver but I haven't solved my problem.
    Now i can't connect the pc with tv and this is a very big problem for me.
    Please help me if you can.
    thanks. (and sorry for my very bad english)

    Hi
    Maybe the scart cable malfunctions or is wrong?
    Some cables have a wrong PIN assignment and therefore the TV connection not functions
    In my opinion the cable should be checked
    The other reason for the missing PAL scart option in the BIOS could be a wrong DMI setting. But this can be checked only by a ASP.
    So try to contact the technician guys and talk to them about the problem of missing PAL scart option in BIOS.
    bye

  • Widcomm 5.0.1.1200 drivers on Qosmio G20-127

    Is there any possibility to install Widcomm Bluetooth software drivers on Qosmio G20-127? I want to use them instead of Toshiba and Microsoft Bluetooth stacks. I have modified btwusb.inf file in Widcomm 5.0.1.1200 with my own PID and VID (taken from Toshiba inf file) but I am unable to install the drivers yet.

    I looked into it, You can force windows to use the widcomm drivers, But there is a chance you will completley muck everything up. I read on a forum that a system restore wouldnt fix the toshiba bluetooth after trying the drivers.
    I found a site where they are discuss the problems in more detail.
    Where they keep updated on the current drivers
    http://www.howardforums.com/showthread.php?threadid=563654
    and where they tell you about bugs that may occur when installing.
    http://www.geekzone.co.nz/forums.asp?ForumId=8&TopicId=2200
    my bluetooth works perfect, so im not about to try anything, but good luck..

  • Qosmio G20: How to disable/workaround SCMS-T for adiosyn with bluetooth headphones?

    Greetings All,
    I've recently purchased a set of bluetooth stereo headphones (Creative CB2350) and found that due to the inclusion of SCMS-T copyright protection I cannot audiosync directly to my laptops bluetooth stack (Qosmio G20). The headphones come with an audio jack adapter (bluetooth transmitter), however it runs on a single AAA battery and cannot last more than about an hour; so I need to connect without this.
    Is there any way to disable or workaround the requirement for SCMS-T copyright-protection in the latest toshiba bluetooth stack? and if not why not?! I've paid good money for both my Qosmio and my Headphones and I'm quit infuriated at the deliberate inclusion of software/firmware designed specifically to prevent me from using my hardware for legitimate purposes (i.e. what they were designed to do).
    Please Help Me,
    Lee ([email protected])
    PS: Frankly I didn't have much of a problem with DRM technology before this, but now I can see just how irritating and pointless DRM is; compare the number of people who actually use bluetooth devices for pirating (negligable) to the number of bluetooth headphones that do not support SCMS-T (alot if all my google searchs are anything to go by) and you see just how stupid the whole idea of DRM over bluetooth really is.
    In my not so humble opinion big corporations like toshiba should railroaded over converluted pap such as SCMS-T as a matter of recourse; the end user doesn't want to spend several years downloading licenses and scouring the web only to find out his/her hardware is utterly useless. (sorry for the rant but that is how I feel).

    Hy there deepblue,
    Thanks for responding again.
    Initially I had thought that the adapter/transmitter failed due to a dead battery, although I have since confirmed that the battery is not dead, in fact the adapter works fine (at least for a time). It would seem that the adapter simply shuts down at random intervals (it has happened a few times now) and I can't figure out for the life of me why; the adapter is designed to switch-off after 2 minutes of inactivity although each time it (randomly) switches off I have been recieving audio so perhaps there is something wrong with the auto switch-off function? or perhaps the batteries are in the process of dying?
    I have can't recall seeing an estimate of battery lifetime for the adapter on the creative product website (that is not to say there isn't one) but the headset has an estimated continuous runtime of up to 8 hours (on its 2xAAA batteries) so I would assume that the adapter can last at least as long (on its 1xAAA battery); if not this amounts to a major design flaw in my opinion. Sadly the adapter doesn't come with an AC adapter, it is only little itself and I assume it would require one heck of a transformer. ;)
    Bah, I'll try and get the blasted thing to work reliably over the next week or so and if I have no luck creative can sort it out. It would still be nice to use my headset without the aid of the audio jack, seeing that headset logo on my bluetooth 'radar' screen is a bit of a tease. ;)
    Incidentally I have been probing furiously to find a set of bluetooth headphones which support SCMS-T and it would seem there is only one set on the market (by bluetake) and what's more it would seem that the SCMS-T is specifically designed to degrade sound quality (don't know to what extent but regardless this seems like 1 step forward followed by 5 steps back to me) which would seem incompatible with any bluetooth consumer audio products - Toshiba me thinks it is time to lock the proponents of SCMS-T in a cupboard somewhere and get to work on bluetooth stack v5.0. ;)

  • Qosmio G20-108 - Outlook Express has stopped me deleting emails

    Just recently my Microsoft Outlook Express has denied me the ability to delete emails with the inevitable result that my (already) crowded hard drive will clog up and die!! My machine is a *Qosmio G20-108*.
    I have been getting error messages on this software *" No: 0 x 800420CD " & "No: 800CCC0F"*
    I also get +"Fatal Error"+ messages each time I open my computer saying this program will be terminated, which I "OK" as I've not opened anything ! This has been a feature for many months now.
    Has anyone any hints for how I might overcome this?
    Thanks

    Hi desneill,
    Im wondering that somebody still use Outlook Express at this time... There are many other good email programs
    Anyway, it would be interesting to know which version of Outlook Express you are using and which operating system.
    Try an update of Outlook Express and Internet Explorer as well
    And think about another mail program, like Thunderbird ;)

  • Need TV aerial adapter for Qosmio G20

    Hi - I desperately need a lead/adapter that will enable me to connect a conventional TV aerial lead to my Qosmio G20. Can anyone advise where these can be purchased from - I've looked at the Options website - and may be missing the obvious - but I can't find one.
    Any advise appreciated. Thanks.

    Hi - I need to connect a TV aerial to my Qosmio - not the Qosmio to a TV! There's an aerial input on the rear but it is not a standard UK type adapter (i.e. a conventional aerial lead will not fit). Please can someone advise what type of lead or adapter I need (and preferably where in the UK I can purchase one from) to connect my laptop to our house TV aerial.
    Many thanks.
    Matt

  • Strange issue with my Qosmio G20

    Qosmio G20. Purchased January 2006. - Just out of guarantee.
    I have now noticed a grayish smudge / against white background screen - positioned at the btm of the screen about 4"long with a depth of 1" - the smudge appears also to extend vertically but becomes less noticeable.
    Any thoughts what the problem could be.
    Thanks

    Hi
    According to your message the issue looks like something wrong with the display.
    Dont think something like that can be related to the software issue but who knows
    Try firstly to update the BIOS to the latest available version.
    Then you should try to update the graphic driver.
    If both updates dont help then a hardware fault could be possible
    In this case the faulty part must be replaced
    Best regards

  • Colour Pearl w/o Software Disc

    *I'm trying to get colour pearl for my 8100 because my trackball appears to be a little discolored & its really ugly.
    *I DO NOT have the software disc for my BB.
    *Can someone help me out by telling me what software I need to download of the BB website.
    *I don't have any apps downloaded (I don't even have the desktop manager b/c I didn't know which one to choose).
    Thanks,
    CandieM

    Here's an OTA link to Blingball (you need to be running OS 4.5 for it to work it looks like. I've copied the warning from the post as well:
    BlingBall 0.9b2.
    WARNING: This is for the BlackBerry Pearl 8100 with 4.5 OS only. This application is only supported on 4.5 OS. Some have reported that it does, in fact, work in OS 4.2, though. This application will do nothing for you if you have an 8110, 8120, or 8130 as those devices do not have the polychromatic trackball.
    NOTICE: This application is beta and has only been tested on a very small number of devices.
    LINK: http://www.troybrownpc.com/blingball.jad
    EDIT: in order to change the Trackball color or set it to "Disco" which flashes all the colors in Sequence go to Options->BlingBall Options and you'll be able to set it from there. There is a custom color option but I didn't play with that yet.
    Message Edited by teddana on 05-13-2009 03:45 PM
    Of all the things I've lost, I miss my mind the most!

  • Qosmio G20 - sound and tv tuner drivers (digital)

    Hello all,
    I recently purchased a Qosmio G20 (490ls) in Japan and have had nothing but problems thus far.
    The original OS that came bundled with the computer was Windows XP Home (Japanese). I can not read Japanese but I have an English version of Windows XP MCE so I didn't think this would be an issue.
    I could not install it correctly so I handed it over to a tech and he accidently wiped everything (the OS, drivers etc) and I do not have a recovery disk from the original.
    Anyways I gave it to a new tech to install and they are almost finished except they are missing 2 drivers --- the sound driver and the tv tuner driver. The European drivers are analog and do not work on the Japanese version, however, it needs digital drivers.
    I am in desperate need of a "digital sound driver" and a "digital tv tuner driver", if anyone could help me out or point me in the right direction it would be much appreciated =)
    Thank you

    Hello Michael
    I am very happy that you are there. Maybe you can give us very useful information. I have heard that just TV tuner from Japan can be used in whole world without any standard restriction.
    Do you know something about that?
    Maybe it is the reason why you can not configure it properly. I am pretty sure that the driver for your unit is designed just for Japanese market and it is possible that our European driver doesnt work properly. Check the driver from US download site
    http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

  • Qosmio G20: How to get rid of large, green on-screen volume display?

    Hi,
    I have a Qosmio G20 which i bought in Japan last year and have since changed it over to English operating system and drivers. However one thing ive noticed that is different from the Japanese set up is that everytime i adjust the Volume level using the wheel on the right hand side of the laptop, a large green Volume level display comes up on the screen. I want to get rid of this cos it takes up nearly half of the screen. The Japanese version didnt have this problem.
    I checked all the settings in Control Panel and various Properties sections as well but couldnt find anything.
    Any suggestions how to remove it? Any other Qosmio users have this on their screen?
    Thanks.

    OK, here's how the volume bar works in all Media Center (2004-2005) and how to change it :
    Create a .txt file with the following :
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Media Center\VolumeDisplay]
    "Disable"=dword:00000000
    "FontSize"=dword:00000024
    "Color"=dword:00ffffff
    "Timeout"=dword:000003e8
    Don't include the --------
    Now here are what the settings do:
    Disable: (enable or disable the volume bar)
    - 00000000 (bar is shown)
    - 00000001 (bar is hidden)
    FontSize: (decide the font sized used to display the word "volume")
    - 00000024 is font size 36 (it's hexadecimal value), for exemple 00000014 is fontsize 20, etc..
    Color: (the color of the control bar and of the word "volume")
    00ffffff corresponds to white, 00000000 corresponds to black. also hexadecimal.
    If you want an easy way to find out, just check the color you want in HTML:
    If HTML is #00AAFF for exemple, then you need to put value 00FFAA00, or for HTML #556677, the value will be 00776655
    Timeout: (it represent the duration of displaying the volume bar)
    000003e8 corrsponds to 1000 ms = 1 seconde. For exemple, 1,5 second is 000005dc, or 2 second is 000007d0
    So replace accordingly the above with the value that you like, save as "bar.reg" then double click on it and reboot the PC!
    Enjoy, it was quite a hassle to find those keys because they don't exist initially! (and because for each try, I must reboot.. :/ )
    Later,
    Alcahest
    ps: it works on ALL Qosmio machines ;)

  • Qosmio G20 - System recovery without CD Drive?

    Hello Everyone.
    I have Qosmio G20 and the internal DVD Drive is not working.
    I have recovery DVD also, since DVD Drive is not working I am not able to boot with recovery DVD and do the recovery.
    I do have external DVD Drive also but Qosmio doesnt support USB external drive for booting.
    Is there any way to recovery my system without replacing my internal DVD Drive.
    Regards
    Karthik

    Maybe if you start your notebook in DOS and load DOS driver for external device. With full access to external device maybe you will be able to start recovery procedure.
    To be honest I don't understand why you don't want to replace optical disc drive. Qosmio G20 is so old and parts are not expensive anymore. Check eBay and you will find a lot of drivers for Toshiba notebooks.
    Replace the drive and be happy. It is not so big investment.

  • Is Qosmio G20-118 Vista capable?

    Hi.
    I´m wondering that almost everyone is updating to Vista but my laptop was bought in November of 2005 and has no Vista Capable stick on it.
    Despite not having a duo core processor, but a 760M Centrino, if it will run Vista and wich version?
    Would it be capable of running Vista Premium?
    Even if it´s only Vista lightest version capable..Will the processor get slower and if an update of 1G memory to 2G memory will benefict the machine time?
    ps: Oh i have a Qosmio G20-118,Processor 760M Centrino 2G, 1G memory (512+512).
    thanks in advance

    I really dont understand why you write so stupid comments and sorry if you are not satisfied with my comment. I just try to be realistic. Few my friends have non-Toshiba notebooks and have the same opinion as you have but you must realize that all notebook models will not be supported. I can imagine that in the future you will be able to find some drivers for your Qosmio but probability not in next days.
    I have Satellite M70. I have bought this unit last year as you your Qosmio. It is NOT Vista capable notebook but I use Vista over two month now. Sure I can not use some Toshiba specific stuff but I dont care about it.
    Many Vista features allow me to use notebook well and I am pretty satisfied. Only problem I have is not enough RAM but it is not important for this discussion.
    > I've never heard of software being so 'different' that makes it impossible to run.
    Please buy some PC magazines and inform you about Vista and software compatibility before you write here such funny things.

Maybe you are looking for

  • Get JSP file to run with an applet tag under JDeveloper

    I Created an applet and an html file under JDeveloper. with the applet tag in the html file. when I run the html file the applet runs perfectly. I Created a jsp file in the same project with the applet and the html file under JDeveloper. I copied and

  • Insert Statement is not working in Oracle Form

    Hi all, I have developed a custome form from the scarch. I have one button on that for called "PROCESS" when I cick on the PROCESS button it should insert record in to one custome table. I have created custom table in custom schema and given grant to

  • Formula Question.. Perhaps obvious

    Hi All, I believe I seen something of what I'm looking for in excel so I'm not sure the probability of it working in numbers (hope it does). I'm current developing my own account spreadsheet and trying to figure out a formula where; Cell A3 is a bala

  • Missing spaces between words after importing Word document into RoboHelp HTML version 8

    I created a 400+ page document in Word 2007 and imported it into RoboHelp 8 (HTML, not RoboHelp for Word). In many places, the space between a bold word and a non-bold word is no longer there. I would like to avoid having to go through the entire RH

  • Reg. Download Report on IT0759

    Hi, We have a requirement wherein The Master Data maintained in IT0759 (Compensation Process) is to be paid to the employees as VCPI payment or IPI payment in the relevant quarters. The amount mentioned in this Infotype is entered and sanctioned bya