Qosmio G20: Sonic reports formatting failed when formatting CD-RW

I am trying to format a Verbatim CD-rw and cannot format or burn any data, pictures to the cd.
Is this the software of Sonic or is this because the media type needs to be chanted?
At present I want to burn cds with my pictures, so would appreciate any input.
Many thanks. Oh I have a G20

Hi
Its not easy to say what causes this issue.
You should investigate a lilt bit. Try to use different CD brands, remove the Sonic from your notebook and use the Nero.
This is a great burning application! Its very easy to use and it supports more functions as the preinstalled Sonic software!
Greetings!

Similar Messages

Report Job failed when Bursting is used in BI Publisher 11.1.1.5

The Report Job failed when Bursting is used.
error message:
[INSTANCE_ID=aimedap1s.1347261753557] [OUTPUT_ID=1421][ReportProcessor]Error rendering documentoracle.xdo.servlet.scheduler.ProcessingException: [ReportProcessor]Error rendering document
at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.renderReport(BurstingReportProcessor.java:455)
at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.onMessage(BurstingReportProcessor.java:127)
at oracle.xdo.enterpriseScheduler.util.CheckpointEnabl
the reproduce steps :
1. Create a Bursting query in the Data Model
2. Create Report Job with the option
"Use Bursting Definition to Determine Output & Delivery Destination" enabled
3.Schedule the report Job
4. run the report and found the status of it is problem, the error message above can be found.
*Note:not all the report job failed when bursting is used, in step1 when set OUTPUT_FORMAT as PDF,HTML,RTF,PowerPoint 2007,
the report will be run successfully,but when set other OUTPUT_FORMAT that list in the following document, the report can not run successfully.
http://docs.oracle.com/cd/E21764_01/bi.1111/e18862/T527073T555155.htm
Adding Bursting Definitions>>Defining the Query for the Delivery XML
>>OUTPUT_FORMAT
Can anyone give some advice on how to troubleshooting it?
Looking forward for your reply
Regards

Hello vma.
I happened to find the solution on 11.1.1.3. With xdo-server.jar, you can use DataProcessor class.
For details and sample source code:
http://blog-koichiro.blogspot.com/2011/11/bi-publisher-java-apigenerate-pdf-with.html
* Not sure if it works on 11.1.1.5 though, I hope this gonna help you.

Crystal Reports Publication fails when using dynamic recipients

Hi experts,
We are facing a problem related with the BOE 3.1 Dynamic recipients Publication.
We have created a Publication with just one Crystal Report based on a MDX Query. We send the report in PDF format to email destinations
Dynamic recipients are defined in a WebI report pulling data from a BW query universe. We can display the email, user ID, Use Name and other fields we would like to use as dynamic parameters.
Server side trust seems to be configured (is there any way to test it is properly configured?).
The Publication is working fine with enterprise recipients (which have SAP BW account), and each recipient receive its PDF by email.
When we execute same report with dynamic recipients without selecting dynamic personalization parameters it is working fine. But when we select one dynamic parameter (which is coming from the WebI report we use for dynamic recipients) eg: Profit Centre, the Publication fails and we get a Database Connector error:
2011-02-14 08:53:25,275 ERROR [PublishingService:HandlerPool-13] BusinessObjects_PublicationAdminErrorLog_Instance_31036 - [Publication ID # 31036] - Scheduling document job "P&L" (ID: 31,051) failed: Error in File ~tmp191067bfa343ff0.rpt: Database Connector Error (FBE60502) [1 recipients processed.]
How can a dynamic parameter affect on the Database Connection?
Does anyone have an idea about what could be wrong?
Thanks!

Ino, what do you mean for "technical name or the member unique name"? Are you talking about the SAP User name? So in the dynamic recipients we can find these parameters:
- Recipient Identifier (required):
- Full Name:
- Email:
In the Recipient Identifier I should refer to a SAP user?
Dynamic recipients option is working for same recipients. The problem appears when I assign one parameter to a field coming from the dynamic webi report.It fails with the previously detailed error. This parameter assignment seems to be causing the Database Connector error.
Message in CMC:
2011-02-14 17:00:25,590 ERROR [PublishingService:HandlerPool-24] BusinessObjects_PublicationAdminErrorLog_Instance_31594 - [Publication ID # 31594] - Scheduling document job "B1 - P&L" (ID: 31,603) failed: Document for recipients {BD1~500/EVER} failed: Error in File ~tmpa0067c160f93d0.rpt: Database Connector Error Document for recipients {EVER, JOHNDOE} failed: Error in File ~tmpa0067c160f93d0.rpt: Database Connector Error Document for recipients failed: Error in File ~tmpa0067c160f93d0.rpt: Database Connector Error (FBE60502) [4 recipients processed.]
Error in the Adaptive jobserver trace does'nt give more details:
|1c2fd2be-3ba1-f414-f8fa-e4f7b004f1ee|2011 02 14 17:00:18:974|+0000|==| | |jobserver_vwd2520.AdaptiveJobServer_CRCPPSchedulingService_CHILD0| 2560|4856|| |6187|1|11|2|CMC.WebApp|vwd2520:1624:39.23486:1|CMS.runJobs|localhost:8392:11648.936338:1|jobserver_vwd2520.AdaptiveJobServer_CRCPPSchedulingService_CHILD0.run|localhost:2560:4856.5:1|CntazqXlSEO7hcDJVIv11545bbb|||||||||||(.\src\reportdllerrors.cpp:140) ras21-cr: procReport.dll: CRPE FAILED: GetLastPEErrorInfo(1) returns crpe error code [707] with extended error string [Database Connector Error: ''
Failed to retrieve data from the database.
Failed to export the report.
Error in File ~tmpa0067c160f93d0.rpt:
Database Connector Error]. Localized error string is [Error in File ~tmpa0067c160f93d0.rpt:
Database Connector Error]
I would like to discard thats a SNC misconfiguration error. Can I consider that SNC server side trust is properly configured if I can run Publication for many SAP users mapped in Enterprise?
Thanks!

Crystal Reports 2008 fails when called from e Web Service under 64bit OS

I have discovered that Crystal Reports 2008 doesn't work when called from a Web Service running under 64bit Windows platforms (in my case Windows 2003 Server and Windows XP 64bit); practically no object is instantiated. I've tried several solutions without success.
Before creating a wrapper component to use under COM+, is there anybody who has a better and cheaper solution than creating another component to wrap CR 2008 ?

Hi Sergio,
Before I mark this post as assumed answered I would just like to say and re-iterate that at this time there is no one answer and we fully understand your concerns. As you know in CR 6.0 it came in 16 and 32 bit versions because at the time 32 bit was relatively new but 16 bit was the norm. This is also true for 32 to 64 bit, 32 is the norm and 64 bit is relatively new. We know and are well aware 64 bit is the future and we are working as quickly as we can to move in that direction. Because of the complexity of the Product it's not simply a matter of re-compiling all of our dll's in 64 bit format. The core of our data connectivity with our database drivers which are dependant on third party clients must also need to support 64 bit modes. This as well as Printer drivers also need to be 64 compatable, there are a multitude of dependencies that we rely on that must add 64 bit support. As a programmer you are well aware of the issues around Thunking back and forth between 32 to 64 bits, it can cause delays and potentially loss of data which is a whole other issue. Not to mention also that we would have to ship both versions potentially doubling the size of the distribution packages or doubling the size of the dll's to have the ability to work in both modes. Relatively speaking of course, it would not be double the size but the variables would need to be able to allocate 32 or 64 memory blocks.
The other option is to produce 2 separate versions, this alone is a massive project. Any issue would need to be fixed in separate code streams.
So I'm sure you can see it's not simply a matter of saying yes we support 64 bit. It's a massive project that is going to take time to do and we have to wait for the third party drivers to commit also.
Visual Studio .NET 2005 and 2008 is the only option if you want true 64 bit but you will be limited on what DB's you can support and export formats you can export to. They are the only drivers we did convert to 64 bit.
Thank you for your understanding
Don

Qosmio G20-102: RAID problem when installing windows xp media center

First I didn't find the raid driver for my qosmio. I tried another Qosmio G20's RAID driver but when it reachs the stage when I ask windows to format the C driver it shows me an error. It says that it finds an error in the file KR10N and it ends there.
please help me and thank you.

Hi
It seems that the Qosmio G20-102 belongs to the PQG20E series.
Searching on the Toshiba European driver page I found the RAID driver v1.03.0008 for Windows XP MCE (can be used also with XP Pro).
You will need an external USB FDD to include this driver into the OS.
But note; after the RAID driver installation you shouldnt format the HDD or create a new partition because this will delete the RAID driver from the HDD and the OS installation fails!
I hope I could help you would also appreciate a feedback ;)
Best regards

"ARRAY DEGRADE" message on my Qosmio G20

Hi everyone,
I have a qosmio g20 and for no reason when i start up the following message appears:
ARRAY-1 is DEGRADED.
I tried allmost everything, uninstall raid utility, format both disks but I still get the same message.
I also get the same message when i try to mirror the two disks.When reaching about 90% of mirroring an alert pops up again stating "array 1 degraded,one disk is missing".
Hope someone can help me.
Many thanks,
Kozach75

Hello Kozach75
This message appears if the RAID controller detects some problem with HDD. On this way it is not possible to say why this happen but it can be some serious hardware problem. Please contact service partner and let them check the unit. G20 is a new unit and the valid warranty will cover all costs.
Check this page http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true .
Good luck!

Issue on How to mimic Deski document from CMS to local machine, pass parameter, execute and save in a mutiple report format then store in a network drive.

Post Author: usaitconsultant
CA Forum: JAVA
Would you know if there's a way to mimic Deski
document from BOXI server(CMS) to local machine, pass parameter, execute and
save in a mutiple report format then store in a local drive or network
drive? Most examples and tutorials in BO XI R2 I've seen are scheduling while drilling report is for web intelligence only and not desktop intelligence. Please let me know your ideas. I would really appreciate your help. Thanks.

Post Author: usaitconsultant
CA Forum: JAVA
Hi Ted,
Thanks for the reply.The file is not available in the server. Though, I checked CMS and I found an instance in history tab and the status is failed with error below.
Error Message:
A variable prevented the data provider Query 1 with BANRRD30 from being refreshed. (DMA0008).When I checked my codes, I found out that the object Im using is for web intelligence data provider. However, I cannot find any documentation and example for passing parameter values in desktop intelligence data provider. Any idea on this? You think this is not suported by Report Engine SDK?Thanks.

Report format is not changing in IE

Hi All,
I am working with Report Designer. when i am executing the report, initially report is executing properly for the first time and givining define format. but if i am doing any change in report format in report designer the executed report do not capture the changes. the report generated on the web portal showing me the same output generated for the first time. if i am creating another copy of the same report by "SAVE AS" and then executing it, then again it is showing me the proper output for the first time only but it is not working if i am doing any changes in format.
Kindly guide for that.
Regards,
Kaushik

Hi Kaushik
maybe you've already solved your problem, otherwise here's a program which most probably would solver your problem:
report zicm_cache_invalidate_all.
call function 'ICM_CACHE_INVALIDATE_ALL'
exporting
    global              = 1
exceptions
    icm_op_failed       = 1
    icm_get_serv_failed = 2
    icm_no_http_service = 3
    others              = 4.
if sy-subrc <> 0.
message id sy-msgid type 'E' number sy-msgno
          with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Setting global to 0 would invalidate only local... It's the same like invalidating the cache thru SMICM
Regards
Gerald

XI R2 To 3.1 Sp2 migration and report format issues

Hello,
is there a way to fix or troubleshoot report format issues after migrating to 3.1?
We have a heavy report that the format (the way the report looks) is very important. In crytal Reports 2008 sp2 the format is OK.
But from BOE CMC or from url reporting the report format have problems.
Thank you
Edited by: RUHVER BARENGI on May 18, 2010 9:47 AM
Edited by: RUHVER BARENGI on May 18, 2010 9:48 AM

Hi Ruhver,
Crystal Report documents are heavily dependant on the printer driver for formatting. If you design the report using a specific default driver than it will be dependant on that printer driver for formatting. When you publish it to Enterprise, the same printer driver may not exist so the report will be re-formated to fit the default driver on the server, or if no driver exists, it will use an internal method to format the report.
Try this as a test.
1) Open your report in the CR 2008 designer.
2) Click on the File/Page Setup.
3) Select the "No Printer" option. This tells the report to use this internal method to format the report
4) Save this document as "Title - No Printer"
5) Export it to Enterprise
6) Test this report again. Formatting should be identical in BOE vs CR.
Keep in mind that when you change the driver in step 3, the report in the designer will re-format. You may need to tweak the report again in order for the formatting to be as desired.
Test this out and if you require further assistance with this, I would suggest opening a message. This is a common issue and a support engineer could likely help you with this pretty easily.
Hope this helps,
Jb

Why Reports format behaves different in Excel and browser(if desformat=html or pdf)?

1-Why Reports format behaves different in Excel and browser(if desformat=html or pdf)?
2-I made three queries Q1,Q2 & Q3 and linked them with proper field links but suppose Q3 returns no records for some Q1&Q2 records & when the report runs for delimited options it reflects only those records as output for which all the queries return records(if Q3 returns no record then the related records from queries Q1,Q2 don't reflect) while the output in desformat=html or pdf is ok..
can you please resolve my problems
( I have installed patch 5a in my report server machine)
Thanks & Regds.
Suneel
null

What do you mean by "different"? (In our
experience, Oracle html output has too many
columns, which are not visible in the
browser but are obvious in Excel.)
We build our own html programmatically, so
that Excel matches the browser more closely.
-- Allan Plumb

3.0 Shared Component - Report Format - all PDF

Greetings,
Details
I have been working with the REPORTS - REPORT QUERIES section of APEX 3.0
The testing I have been doing is very simple, but I am running into a bit of a stumper.
I have created 4 report queries on the EMP table (SELECT * FROM EMP) that all use the same REPORT LAYOUT. The RTF file which is the template is a very simple - show all columns and rows for the EMP table (14 rows).
I have set each of the 4 report layouts to a different format.
1 - PDF
1 - EXCEL
1 - WORD
1 - HTML
I am NOT using the ITEM to dynamically set the format.
I can TEST each of the reports in the shared component area, and they test OK with a success rate of 75%.
The EXCEL format does not export correctly. (using Excel 2002 on the client) It is a bit of a mess. (Works in the XML publisher template builder on the client.. so the format is not the issue.)
More curious is the behavior when I put this application. I have created a LIST of the 4 report formats. All 4 return the PDF format when used.
To see the Application:
http://apex.oracle.com/pls/otn/f?p=34096
Question Summary:
1 - Has anyone run with and tested the RTF style report layouts out to Excel?
2 - The approach described usees 4 report queries against 1 layout. Is this a VALID use of the report functionality?
3 - Why would all the reports try to use PDF when they test in the correct formats?
Best Regards and Thank You.
-- Tim

Tim,
The Excel output is not strictly XLS, it's actually HTML formatted in a way that Excel understands and through setting the MIME-types we make it open in Excel. I have to try reproducing your specific problem with Excel 2002. If you could send me your RTF layout and the end-result ([email protected]), I can take a look.
Your approach using 4 different queries with the same layout is perfectly fine. Ideally of course, you would not have to replicate them same query four times, so we are considering a shared query concept for future version of Application Express.
You specific problem with the output format being PDF at runtime appears to be a bug, I'll investigate further. Meanwhile one work-around would be to use a report region instead. If you're using the same SQL query as the source, you can associate the same report layout (on the report print attributes page). You could also create a "container" page for that report region, that's never actually called by the end user, and then have a button pointing to the URL below for printing. It would then work just like your report queries, only that you now would get the requested format:
f?p=&APP_ID.:[REPORT PAGE ID]:&SESSION.:FLOW_XMLP_OUTPUT_R[REPORT REGION ID]
so if your app ID is 34096 and your "container" page e.g. 99, and on page 99 your report region ID would be 1234567890, then use this URL as the button target:
f?p=&APP_ID.:99:&SESSION.:FLOW_XMLP_OUTPUT_R1234567890
Hope this helps,
Marc

Change the HTML Report format the same as TestStand 2010 SP1 in TestStand 2012

I have a lot of test steps (~10K) that gets executed and the indentations on HTML report format in TestStand 2012 gets too deep. I have to slide the horizontal bar to the right to see the report when l'm in the middle. I did not have this issue in TestStand 2010 SP1.
Is ther a way to change the HTML Report format (style) the same as TestStand 2010 SP1 in TestStand 2012?

dexrays:
We are currently investigating this issue. In order to help us with the investigation could you post a sequence file and configuration that reproduce the problem? The configuration file is located in C:\ProgramData\National Instruments\TestStand 2012\Cfg\ModelPlugins\ResultProcessing.cfg for Windows Vista / Windows 7 or you can use the Cfg link in the TestStand 2012 installation directory.
You can use the Legacy Model Switcher (included in TestStand 2012) to use the legacy models instead of the new models. The legacy models are more backward compatible, however, this also means that you will not be able to use the improvements in the new models (for example, the new plug-in architecture). If this is acceptable then you can use the legacy model switcher to switch to the legacy models. The Legacy Model Switcher is located in the Start Menu under Programs->National Instruments->TestStand 2012->Tools->Compatibility. For more information on Legacy Model Switcher please read the online help.
Thanks for your report and for your help with diagnosing this issue.
- Francisco

Report Format like HFM

Hello All,
I am trying to replicate a report format that is identical to HFM Reporting and Excel add in in Essbase. Here is the Format how it looks like
Column-1 Column 2(Sales)
Prod Level 1
Prod Level 2a
Prod A 100
Prod B          200
Prod C          300
Prod Level 2a Total                  600
Prod Level 2b
     Prod D     300
     Prod E      200
Prod Level 2b Total                  500
Prod Level 1 Total                     1100
This is a 3 level hierarchy Prod dimension(Prod level1 - prod level 2(prod level 2a, prod level 2b)- prod level 3(prod A, B, C, D, E)). so when we try to implement this in OBIEE we end up having 3 columns one for each level of the Prod hierarchy.
But the business wants this in one single column which has all the children from all the subsequent levels idisplayed in ths same column. So this is like more or less replicating P&L reports in HFM or replicating the essbase excel add in reports.
is there any way to get the desired format? i am thinking about Publisher but I dont know if that can be done or not
Any suggestions would be appreciated
thanks in advance
Prash

Thanks for your suggestion and that approach will just give me all the levels of children in one row. But i need them in multiple rows but just under one single column
I want them like
Column 1
Prod Level 1
Prod level 2
Prodl level 3
and also grand totals at each subsequent levels. but concatenating or string operations gives me in one single row as below(which i dont need) and also i will not be able to group them total wise.
Column 1
Prod level prod level2 prod level 3
Thanks
Prash

Report Format and read line

Dear all,
I have a report format :
Field 1          Field 2        Field 3
XXX              XXXXX          XXXX
XXX              XXXXX          XXXX
XXX              XXXXX          XXXX
I want to change this format to :
Field 1          Field 2        Field 3
XXX              XXXXX          XXXX
                   XXXXX          XXXX
                   XXXXX          XXXX
Field1 is be display one times and I want that I can read the field 1 value with READ LINE
I try to use HIDE: Field 1 in a loop ,but It can not hide the field 1 value.
why?
thanks you
John

Hi,
Use the statements READ LINE and READ CURRENT LINE to read data from the lines of existing list levels. These statements are closely connected to the HIDE technique.
All of the lists generated by a single program are stored internally in the system. You can therefore access any list in a program that was created for the same screen and that has not yet been deleted by returning to a lower list level. To read lines, use the statements READ LINE and READ CURRENT LINE.
To read a line from a list after an interactive list event, use the READ LINE statement:
READ LINE <lin> [INDEX <idx>]
[FIELD VALUE <f1> [INTO <g 1>] ... <f n> [INTO <g n>]]
[OF CURRENT PAGE|OF PAGE <p>].
The statement without any options stores the contents of line <lin> from the list on which the event was triggered (index SY-LILLI) in the SY-LISEL system field and fills all HIDE information stored for this line back into the corresponding fields. As far as SY-LISEL and the HIDE area are concerned, READ LINE has the same effect as an interactive line selection.
<b>Here is the Demo Program</b>
REPORT demo_list_read_line NO STANDARD PAGE HEADING.
TABLES: sflight.
DATA: box(1) TYPE c, lines TYPE i, free TYPE i.
START-OF-SELECTION.
SET PF-STATUS 'CHECK'.
GET sflight.
WRITE: box AS CHECKBOX, sflight-fldate.
HIDE: sflight-fldate, sflight-carrid, sflight-connid,
        sflight-seatsmax, sflight-seatsocc.
END-OF-SELECTION.
lines = sy-linno - 1.
TOP-OF-PAGE.
WRITE: 'List of flight dates'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
WRITE: 'Date:', sflight-fldate.
ULINE.
AT USER-COMMAND.
CASE sy-ucomm.
    WHEN 'READ'.
      box = space.
      SET PF-STATUS 'CHECK' EXCLUDING 'READ'.
      DO lines TIMES.
        READ LINE sy-index FIELD VALUE box.
        IF box = 'X'.
          free = sflight-seatsmax - sflight-seatsocc.
          IF free > 0.
            NEW-PAGE.
            WRITE: 'Company:', sflight-carrid,
                   'Connection: ',sflight-connid,
                 / 'Number of free seats:', free.
          ENDIF.
        ENDIF.
      ENDDO.
ENDCASE.
Regards
Sudheer

Help on report formatting

Hi all,
Ok dumb question but I am going to ask anyway.....
I have a report that I want to break on emp supv so that each supv gets a separate page of their emps....
is there a way to make my report break to a new page or a new block so that when I export to excel I can break.
The report currenlty lists the supv then emp details then a new supv then emp details but there are no gaps in the report ( i.e. separation to a new page, line break etc)
Currently we do not have printing setup in Apex to use pdf, etc and I have asked Dba to set it up. If I export the report to excel, while supv is grouped with their list of emps, there are no breaks and in excel I will have to manipulate to provide each supv their list.
...I am trying to provide an easy way for user to print each supv to their own page prior to print server config being installed inside of apex - is this even possible?
I have been to the column breaks portion on report formatting of my report app and all I can see is to break by columns 1, 2 ,3 or all three but no way to tell it to separate.
Regards
Danny
Edited by: DSULLIVAN on Feb 9, 2010 12:20 PM

You can't really do a page break in an excel file download. You would have to go into Excel and do the formatting to do that..
Thank you,
Tony Miller
Webster, TX

Qosmio G20: Sonic reports formatting failed when formatting CD-RW

Similar Messages

Maybe you are looking for