Qosmio G30-102 Optical SPDIF out not working

I have bought new Qosmio G30-102 and I am quite sure that SPDIF Optical Out connector is not working.
I can't test it at the moment, but I had a couple of SPDIF sound cards and every one of them had a red light on all the time, which signalized that Optical SPDIF is supported.

Hi,
maybe I would first try a SPDIF device, if I were you, because I agree with the user before, it has definetively a SPDIF out.
Greets

Similar Messages

XBox 360/Audigy: SPDIF IN pass through to SPDIF OUT not working with 5.1

Hi,
I've a problem passing my digital dobly signal from my 360 over the Audigy soundblaster to my external decoder. I want to use digital SPDIF IN from the audigy?IO device to pass the signal directly without processing to the external decoder by using the SPDIF OUT.
There is only one digital in at the decoder, so I need this combination if I want my PC and XBox to be connected both without a toslink switch.
I activated the pass through and external decoder option in the audigy console application. I also disabled the DDL encoder. Additionally I set my Windows 7 speaker settings to use SPDIF OUT as standard device.
This is working for every dolby digital signal?from a dvd which I play on my PC, but not for the XBox signal. The signal is not recognized as a 5. dolby digital signal, but as a 2.0 signal. So something must happen with the signal in the audigy. The XBox settings are correct, because when I connect the toslink cable directly to the decoder everything works fine.
My drivers are the newest one (3.8)?from the support pack.
I don't want to use the DDL option, because the latency is much to high to allow regular playing!
Is there a possibility to pass the XBox signal through to my decoder by using the digital in and out of the audigy?
Thanks in advance,
Axel

Hi I have the same probleme, exept that I have succesfuly pluged my home theater receiver and the 5.1 works. Just my subwoofer seems not to work properly. Like when I plug it into a digital dvd player it works very nicely. but when pluged into the sound card it seems that it dosnt have any signal for it.
ANy clues??? I know i pluged everything finely I have tested the sound test for each speaker and sub to, from the receiver and from the creative software the sub seems to work but very quietly even if I cran the volume up on the sub or in the software , the sub dont work as it should.
1 thing I remarqued is that the sub works occasionaly in some movies. When listening to the music it not working and I dont understand that.

Spdif out not working with latest drives on XFI

/? I installed the newest drivers that were released recently. Driver version 6.0..347.
Before I upgraded to these drivers my dolby digital was working fine.
In powerdvd I have SPDIF/out selected. And the dolby digital light will not come on in the reciever. Anyone?
else having this issue?
SYSTEM SPECS: Antec P83 * Antec CP-850 * Intake two S-Flex SFF2E fans *
Exhaust? two S-Flex SFF2E fan * Noctua NH-U2P SE366 cpu cooler * Asus P6T Deluxe *
Bios version 605 * Core i7 920 @ 3.6ghz 20x 80bus * Mushkin 3x2GB 998679 @ 7-8-7-20 *
Gigabyte 9800 GTX+ gig * PCIe SB X-Fi Titanium Fatality Pro * Pioneer SATA DVR-22DBK *
Intel X25-M 60GB MLC SSD * Two Western Digital WD6400AAKS 640GB *
?Windows Vista 64 Ultimate SP2 not vlited
Message Edited by galvin on 08-6-2009 05:08 [email protected]

No one has this problem at all?
I want to find out for sure if there is a fix before going back to the older drivers.
If i do the test in the spdif out properties panel -> supported formats. When I do the dolby digital test I see the light come on in my receiver and hear sound just thru the front speakers. But when I use power DVD 9 ultra with the latest patch. I don't get the digital light on my receiver. I had this working with the previous drivers released earlier this year.
Message Edited by galvin on 08-7-2009 0:54 [email protected]

Audigy 2 problems with spdif out not working and cracking appear

Hello everyone,
I am new in this forum but after searching through it i decided to post as i din't find a problem exactly similar to mine.
I have a Creative audigy 2 ZS plugged on my computer with this configuration : Gygabyte P35 DS3, Quad core Q6600, Kingston 2 gb.
From the beginning of my purchase i did not have any problem of cracking or connection problems in spdif with digital din in either XP or Vista. Last week end i decided to re install XP after a virus infection with XP SWEET wich install directly the drivers of my peripherals like the audigy.
The audigy is connected to my speakers : Creative? 5. kit 5700 via the digital din connection and without any analog connection as i selected digital out only in my settings.
Everything was working fine until 2 days ago when? while watching a divx the sound stopped working. i checked everything in m connection and everything was good as well as my speakers. finally i connected the audigy via analog cables to the speakers to find that, if i select digital out only no sound could be heard and finally that poping and cracking sounds started to appear.
I don't know what happened with my system as it never did that before in any of my configurations.
When i reboot my computer, the digital out start working again to finally stop 5 minutes later.
If somebody can help me is help would be most welcome.
Thank you!

Well, I do not know much about the red light thingy, but if the S-Bracket works well, it should be not problem, unless you can't get anything from the S-Bracket.

Optical audio out not working (incl the solution for me)

problem:
new 2011 Mac Mini, 2.5G
connecting to
a) TV via HDMI
b) to a D/A converter and amplifier for a bit better music output
This worked perfectly for my previous MiniMac that I replace due to my need for speed.
Now, I could see some red light at the end of the optical cable, but the D/A box did not recognize a signal?
Furthermore, the Sound switch in Settings would only make the TV play.
solution:
after a lot of troubleshooting at the Genius Bar in Beijing (big thanks for that ... the shop is terribly crowded and they never manage to keep the appointments), we found the optical cable to be faulty .... it was apparently bent too much and still had some throughput but not enough to make the receiver read it.
Nasty one!

I just purchased this exact same receiver (used). Same issue with Apple TV. Anyone ever figure out to make it work correctly? Thanks.

Qosmio G30 - keybored and touch pad not working

Hi
I have a G30 and I have just replaced the DVD drive as my old one stopped working and now my touch pad and keyboard dont work.
The keyboard works in the BIOS. However it dosnt work in windows so I cant even login. I have tryed FN F9 but had no luck and I cant reformat my computer as the DVD drive has only just been put in.
I cant use that either because there are no drivers for it on the computer and its not being picked up.
Any help would be greatly appreciated thanks :)

Hi!
Have you tried external input devices? I mean an external keyboard an mouse.
Why you cant reinstall Windows? You dont need a driver for the DVD drive. You just need the Toshiba recovery disk and boot from it. Follow the instructions on the screen and it starts to reinstall Windows.
Bye

Soundblaster X-Fi Titanium Optical Out not working???

Hey friends,
I purchased a Sound Blaster X-Fi Titanium PCIe yesterday to run on Windows 7 64bit to trigger VSTi instruments. I can hear the VSTi play fine when I have headphones plugged into the soundcard but I want to send the audio sound OUT via the Optical Out into my Steinberg MR86x firewire audio card. ?
I can see the light on the optical cable but no sound seems to be being sent from the sound blaster into the steinberg card.
?Now before people start saying you cant do that, I have have been doing this for the last 3 years and it has been great apart from my RME Audio card is not compatible with Windows 7 64bit hence why I purchased the soundblaster.
I really am at a loss as to what I can try next, I have been through this forum and tried a few recommended tweaks but nothing? Am I missing something obvious here?
I am using the following drivers
Driver: v2.7.008 Windows 7 64bit
DTS Connect: for Windows 7 64bit
Also in the Audio Control Panel / SPDIF I/O all options are greyed out apart from the Digital Output tickbox, I only want to use this card for Audio as in creating music or specifically for triggering VST synths.
I would really appreciate any advice
Thanks in advance
KiloHurtz

Re: Soundblaster X-Fi Titanium Optical Out not working?I have same card, same?OS?and lots of problems.
Analog outputs(control panel->sound->speakers) disappears when boot or reboot, sometimes it works week, sometimes a hours. When it works, it's works ok, but suddenly during boot,?all sounds is lost, when trying launch for example Creative Audio Control Panel this message appears: There are no supported audio device available. You need to close the application. Click OK to close the application now.
And when analog outputs disappears, no any sound via SPDIF, even it shows in notification area and control panel->sound and in device manager.
I have owned card about two months, once change card in warranty, and?several uninstall, cleaning traces, reinstall and card works for while?and?out of blue, when boot computer, no sounds at all and only way to get sounds back is driver uninstall, cleaning and reinstall.
Creative Customer Support seems to be clueless, but make Technical Support Request if problems continue. And all other too, if problems like that appears, contact to Creative, maybe they really try?to do?something abuot it and not just send instructions how to uninstall and reinstall drivers.

After update to version 4.4 optical out not working

Does anybody experience the same problem? After todays update to ios5 (version 4.4) the optical output does not work anymore. I have the problem on all Apple TV's with different audio systems. Any help?

I also have an issue on my Apple TV, but unsure if it is the ports out or the device itself. I have tried resetting it, reboting Airport, nothing works....
I was streaming some Radio music while performing the update and it simply stopped...as I thought it was an odd coincidence, I decided to do an update to the Apple TV. It stated it would be a bit less than 20 min to update. I checked on it in about an hour and the TV no longer displayed the device and the device itself was blinking rapidly.
I also tried to reset it via the remote...holding down the buttons for 6 seconds...I tried 3 or 3 times. The light acted as if it was resetting, but it then reverted back to the rapid blinking.
I need to get this resolved....

Qosmio G30-102: Why is Picture Enhancement Utility not installed?

Hi-
I have recently purchased a Qosmio G30-102 with nVIDIA GeForce Go 7600. In chapter 6 of the user manual it refers to the Picture Enhancement Utility as part of the QosmioEngine facility. This does not seem to have come pre-installed on the notebook. How do I obtain this program and why is it not already on there?
Thanks
Mark

Are you 100% sure that this application is missing on you notebook???
I ask it because usually the TOSHIBA Picture Enhancement Utility V3.8.0.0 should be installed
The QosmioEngine is active when using the Qosmio Player TV or the Qosmio Player DVD. Furthermore the Toshiba picture Enhancement Utility is available on the nVidia Go7300 models.
If you have nVidia Go7300 graphic card you could check the Windows, Applications tabs in the nVidia desktop Manger

Audigy Platinum Ex Windows 7 SPDIF IN not working

Audigy Platinum Ex Windows 7 SPDIF IN not working? I have an old Audigy Platinum Ex that has served me well, until now when I have a new Windows 7 x64 PC (RTM). SPDIF IN no longer works, though everything else does (including SPDIF OUT). I've tried the current and beta drivers for the card, and no difference.
In Windows Vista x64 I could use ASIO drivers with my M-Audio ProFire 60 while using the Audigy for PC audio. Most often this was for skype, which I would set to use SPDIF IN/OUT which I then connected to the ProFires SPDIF OUT/IN. Using the ProFire mixing tool, I could control which mics and levels went to the Audigy while not interfereing with the ASIO drivers recording the mics. The ProFire also recorded the SPDIF OUT from the Audigy to caputre the person on Skype to their own audio track. This is a podcast producer's heaven, and I miss it!
If it's a known issue (SPDIF IN / Win 7), I've had this card through 4 PC upgrades and it's served me well enough I don't mind buying new. The Creative Sound Blaster X-fi Elite Pro looks to be the current version of my Ex - are there any Windows 7 issues currently that would stop me from using it in the role above? I will miss the FireWire port, a shame they dropped that.

Well basically it is possible, and I've found this out. Apparently Dell released a driver or something that allows it to work, but then only if you install a 3rd party modified xp version of the creative suite. I don't remember where I found it, but it was through google... Using some term including x-fi, dts, and vista.... Can't seem to find it now. Anyway, it had a download for the whole creative suite that was modified from the xp version for Vista, however it was buggy as hell, caused driver issues and blue screens, and ended up causing me to have to reinstall Vista altogether again. In other words, it's possible, but I don't recommend it until it's officially supported... Don't know when this will be yet... *crosses fingers*
Luckily I've got a dual OS system with XP too, and I switch to that when I want to use my Xbox 360... However due to Microsoft also being terrible in that department... I now get entertainment off of its 3 red lights... (For those of you who don't know, 3 red lights = hardware error. Sending into microsoft for repair typically is a 2 month process... I'm still waiting on my prepaid shipping box to arri've and it's been 4 days... Will be a similar wait to get it to them, 4-6 weeks for them to actually repair, and another week or so to get it all shipped back). Although even when the console worked, my dsl modem sometimes cut out when playing on Xbox li've and dropped signals, reported errors, etc.
What is with the companies producing technology nowadays? I just want to play Gears in 5. on Xbox li've... *cries*Message Edited by Supercoolyo on 07-22-20070:54 AM

Optical SPDIF output stopped working- why?

I recently installed a larger HD and more RAM in my 1.63MHz Mini. After getting buttoned back up I noticed the optical SPDIF output stopped working (as in NO laser visible). Is there any possibility that this could be related to the OS (10.5.8)? Seems unlikely since it was fine before installation.
I really need this as it is my only option for interfacing with my playback system.
Rich

Hi Rich,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

Qosmio G30-102 - Can I use it as HD screen for my PS3?

Hi
I've got a Qosmio G30-102 and I wanted to know would it be possible to connect up my Playstation 3 via *HDMI*??? At the moment I can only use the AV cables which is really fustrating. If i can use the laptop as the screen for my PS3 using the HDMI cable please inform me in how to do this since I have tried all methods that i can think of.
Thanks
Mo

Hi!
There is no software available for this because its a hardware limitation and this cant be solved with a software.
You have to understand that your notebook is equipped with a HDMI *output* port and not with an input port!! ;)
What you can do with a HDMI port? You can connect your notebook to LCD screen via this port. You will have a better picture quality as with other connection possibilites like S-Video for example.
For example I use the HDMI port of my notebook to watch movies on my LCD screen with HD quality or I watch my photos.
bye

Qosmio G30-102 - Can I install Kingston DDR2-667 RAM insted DDR2-533 RAM?

Hi
I've got a Qosmio G30 102 and I wanted to upgrade my RAM to a total of 4GB (currently I've got 2GB installed with specifications of PC2-4300 DDR2 (533MHz)) . So I've been searching for RAM and I wanted to know would it be possible for me to install.
*Kingston Technology - 2GB PC2 5300 DDR2 667MHz 200pin Memory SODIMM*. Would this work correctly and if so would it be better than getting a (*1GB) Memory PC2-4300 DDR2 (533MHz)* i.e. the standard RAM installed on my Qosmio???
Thanks in advance for th answers
Mo

Hi!
For upgrading RAM on my notebook I have used Kingston DDR2-667 and it works without any problems! :)
So you can use this Kingston module too but I assume that it will only run on 533 MHz speed due the FSB limitation of the CPU. The FSB speed you can check with a hardware information tool like Everest or PC Wizard 2008 for example.
As far as I know the notebook can be upgraded to 4GB maximum RAM.
Bye

MacBook Pro Late 2011 : Optical Disk Drive not working?

MacBook Pro Late 2011 : Optical Disk Drive not working?
When i try to a put in a cd or dvd; it rejects it automatically within 10-15 seconds.
I have resetted SMC and PRAM; no chages.
Don't know what to do. Please help.
Thank you.

Clean the heads.
check to see if it is under warranty.
buy external DVD/CD rw

Tv out not working on ios 8? please tell me what is problem?

When i update my iPhone 4s to iOS 8.1 tv out not working . Help mee plzz

If those numers are ordered correctly it sounds like you are using a faulty charger with your iPhone. It should charge faster with the charger than a USB port as the charger supplies a higher current. Different batteries are going to charge differently based in part on differences in the ways they have been used.
Try using your friends charger with your iPhone and see how long it takes to charge compared with your charger.

Qosmio G30-102 Optical SPDIF out not working

Similar Messages

Maybe you are looking for