Qosmio G30-201 connected to LCD - how to fit the whole screen?

Hi
I have a Qosmio G30-201 laptop and also using a Toshiba WLT58 32 inch widescreen LCD with a HDMI Connector.
I am trying to get the film that I am watching to fill the whole screen and leave the borders off.
Is this possible?
Cheers
Steve

Hi
Did you check if there is an option in the DVD player software which you use to watch DVDs??? Please check it!
Additionally you could check the NVIDIA graphic card properties -> advanced settings.
There you will find tab called GeForce Go.
Thee you should open the table at the left side which provides useful options.
Go to the device settings -> device adjustment.

Similar Messages

How to fill the whole screen of my iMac with the photos included in an iDVD project. (iDVD v. 7.1.2)

How to fill the whole screen of my iMac with the photos I included in an iDVD project. (iDVD v. 7.1.2). I mean, during playing the burned dvd.
When I do "Enter Full Screen", the slide show fills the screen but the photo itself remains in the middle with a wide black border filling the rest.
Any cure for this ?

Hi
In iDVD Preferences - Turn off - TV-Safe area - and the Photos will fill the full area with just letterboxing or pillars as max.
Then "Save as a DiskImage" and test this and see if this plays better - before burning DVDs that's not as You want them.
Bengt W

Re: How to upgrade memory on Qosmio G30-201 and where to buy memory

Hi,
I have a Qosmio G30-201, with the following spec:
- Intel Centrino Duo Mobile Technology featuring Intel Core2 Duo Processor T7400- Genuine Windows XP Media Center Edition- 400 (200 + 200) GB Hard Disk Drive- 2,048 (1,024+1,024) MB DDR2 RAM (533 MHz)- 17" Toshiba TruBrite WUXGA TFT display- HD DVD-ROM drive
Running under Vista Ultimate
I would like to upgrade the memory to 4096.
Do I have to buy 4096 of memory, or can I add 2048?
What memory do i buy? Toshiba do not seem to sell MB DDR2 RAM (533 MHz) after 4 years. What other memory would be suitable?
Many thanks,
Best regards
Nick

Your notebook can handle with 4GB of RAM and I recommend you to use 2 x 2GB module.
Compatible 2 GB module has part number PA3513U-1M2G or Kingston KTT667D2/2G.
Put the part umber in Google and you will find a place where you can order it in your country.
Bye

Nv4.disp error appears and Qosmio G30-201 shuts down

hello
I own a Qosmio G30-201 and have had it for almost 2 years now.
Only a few weeks back I've been getting a error message *error nv4.disp* and my system shuts down.
I've even used the recovery cd many times and it does work for a day or 2
Can any 1 help plz?
thank you

Hi
Try firstly to update the BIOS and the graphic card driver.
If this will not help you then I would recommend contacting the ASP in your country like suggested by Akuma too.
Good luck

HT1212 i have forgotten the password to my ipad and it says connect to itunes but my computer cant connect to the ipad because of the code and i need it know how to wipe the whole ipad and start from scratch?

i have forgotten the password to my ipad and its says connect to itunes but i cant connect it to my computer because of the code on the ipad so i need to know how to wioe the whole ipad and start again like a brand new ipad?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard, and now the two monitors are showing the same thing. How do I undo what the cat did?

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard touching various keys, and now the two monitors are showing the same thing. How do I undo what the cat did?

Have you tried HELP in FINDER? If you open HELP and enter 'displays' in the field in the upper right hand corner you will get a list of topics on setting up monitors. Specifically read 'Setting up multiple displays to show the same image' and 'Setting up multiple displays as an extended desktop'.
Ciao.

How to clean the whole cooling system of Qosmio X770-107

Hi Guys,
is there any manual, how to clean the whole cooling system of an X770-107 Gaming Notebook??
I can try to clean the dust on the intake and outtake of the laptop, but whats in the middlepart of the cooling system??
Any Ideas??

As Tonny already wrote all you can do is to use compressed air and try to clean t up.
For professional clean-up the whole notebook must be disassembled. After doing this there is full access to all cooling modules.
Of course this must be done by authorized personal only. Some kind of maintenance manual is not a public document. What you can do is to contact nearest Toshiba service and ask how much such professional clean-up costs.
By the way: this notebook cannot be so old so I dont think it is full of dust.

How to transfer the whole address book from one no...

Dear friend,
Could you please advise me "how to transfer the whole address book from one nokia to another nokia phone via blue tooth connectivity. (move one by one is not convenience for my hundreds of contact.
Thank and waiting for advice...
victor

If your phones have the built-in "Transfer" (sometimes called "Switch") application, try it.
Otherwise, depending on the model(s) you can also copy all contacts to/from the memory card, and get them over that way.
And you can also synchronize both programs to the same service (e.g., Outlook on a Windows PC using Nokia PC Suite).
And newer versions of Nokia PC Suite can also be used to make a backup of one phone, and then restore to another.
PC Suite you can find here: http://www.nokia.com/pcsuite

How to clean the Trubrite screen of my laptop?

Any suggestions on how to clean the Trubrite screen of my laptop? There were a lot of ideas given in the web but none of them were convincing enough?

For my computer LCD screen I bought screen cleaning fluid and I use it with a lint-free cloth.
Its a perfect combination ;)

When on the internet, how do I expand webpage to fill the whole screen?

When on the internet, how do I expand a webpage to fill the whole screen?

Perhaps Safari isn't quite what you require, too much work involved all the time making it easier to see
Take a look at my customized Firefox:
it always opens to the same size window (or full screen if you like)
it always zooms all web pages 160% (or whateve you like)
it always has large type on the menu bar area. (to whatever you like)
it's very highly customizable, (or use the plain default settings)
has more add-ons than anyone (a real plus when you need it)
has more themes and personas than anyone (make it YOUR browser)
Easier surfing option for hard of seeing users
Safari is about the absolute worst browser since Internet Explorer, it's because Apple has already got your money so there isn't any incentive for them to make a better browser.

I have an iPhone 6 with IOS 8.1.3 and when I use the landscape view in Safari, the bookmark page appears and takes up one half of the screen. How can I get rid of the bookmark page so I can have the whole screen to what I am browsing?

I have an iPhone 6 with IOS 8.1.3. When I go to the landscape view in Safari, the bookmark page appears and takes up one half of the screen. How can I get rid of the bookmark page so I can use the whole screen to what I am browsing?

OOPS! Too quick on the trigger to ask that question without trying anything. Sorry. Solved it by touching the bookmark icon.

How to read the whole name of a music title while scrolling down a list of titles? With the new iOs7 Music App there is no more black box showing the entire name!

How to read the whole name of a music title while scrolling down a list of titles? The old software-app had the function to click for a longer time on a titles beginning letters until a black box revealed the entire name. I miss this function especially for my classical music, because lots of pieces start with similar words. E.g.:
"Beethoven: Variations On "Ein Mädchen Oder Weibchen", Op. 66 - Var. 1"
"Beethoven: Variations On "Ein Mädchen Oder Weibchen", Op. 66 - Var. 2"
Scrolling in a list of title, I can't distinguish the titles, because just the first words are shown followed by: "...".
That's horrible!

Or you could include a width to your body style:
body {
background-image: url(Logo/sky1.jpg);
background-position: center center;
background-attachment: fixed;
width: 75%;}
It might work or not depending on your other color scheme.

How to highlight the whole row of a particular line item of sale

How to highlight the whole row of a particular line item of sales order depending on condition?
Please help its urgent..
Looking forward your reply.
Moderator message: please do more research before asking, show what you have done yourself when asking, do not flag posts as "urgent".
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Aug 9, 2011 9:30 AM

Any ideas on what would cause this NOT to work? I added this row right after the table is created and populated and it is still not highlighted when I enter the form. The snippet of code that does this is:
MyTableModel modelS = (MyTableModel)dataModel.get("S");
jTable1 = new JTable(modelS);
jTable1.setRowSelectionInterval(0,0);MyTableModel is this:
class MyTableModel extends DefaultTableModel {
public MyTableModel(Object[] columnNames, int numRows) {
    super(columnNames, numRows);
public boolean isCellEditable(int row, int column) {
    if (TableKey == 'S') {
      if (column == 6) {
        return false;
    if (TableKey == 'O') {
      if (column == 0 || column == 4 || column == 5) {
        return false;
    if (TableKey == 'P') {
      return false;
return true;
}Can anyone help? Thanks.
Allyson

How to Get the Debugger Screen in WEB Front end of SRM

Hi Gurus,
I have couple of questions for SRM.
1. How to Get the Debugger Screen in WEB Front end of SRM so i can debug the application which is running in EBP system??
2. How to set the flag for external debugging (HTTP)??
3. Using SICF how to set the ITS services ( Like BBPSC01 )for internal ITS so as soon as i place the order it should stop at the break point which i have set in the application.
Thanks.
Regards,
Manoj Tiwari

Setting up Debugging for Integrated ITS
Tcode SICF.
Select service (e.g. default_hostàbcàguiàsapàitsàbbpsc01).
Change service settings and insert parameter ~GENERATEDYNDPRO=1.
Find program to debug. E.g. SE93. Enter bbpsc01 à Display and get Program field (SAPLBBP_SC_UI_ITS)
Execute SE38 and enter program name.
Turn HTTP Debugging ON. UtilitiesàSettingsàDebugging. Click Actv and username.
Add HTTP Breakpoint. Display source code and select Utilitiesàbreakpointsàset.
On External Debugging select HTTP Breakpoint.
Remember to remove breakpoints, deactivate debugging and remove parameter GENERATEDYNPRO.
Can run program RSBREAKPOINTS to find which programs you have breakpoints set in.
Have fun with EBP
If you have any more questions i would be happy to help you. Send me mail on [email protected]

How to Modify the Selection Screen in Report Painter

Hi All,
I am working on Report painter and writer,
can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport .
how can i add more select options to the exisiting one
please let me know the Procedure and provide some relevent documents .
Thanks and Best regards.
uma

Hello...
In the program ...we can find the following chunk of code..
selection-screen:begin of block B1 with frame title text-001.
Parameters : ....
select-options:.....
selection-screen:end of block b1.
if we need to add any more user inputs we can write the code inside the existing
selection screen....end of block .
or create a new block ..just the block name should be different...
if we are using select options...we need to declare the table name using the key word for the field on which we are giving select options ....
Tables : BSIK.
Please see the following code:
Imagine :- we have the current selection screen..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR.
SELECTION-SCREEN END OF BLOCK B1.
we need to add 2 more fields on the selection screen ..this we can do as the following
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR,
                S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE BSIK-BUDAT OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1.
OR...create a new block...
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:   S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE RFPDO-ALLGSTID OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B2.
there are many options available in selection screens..like creating check box,radio button etc..
for more info press F1 help on the Selection screen in the ABAP editor
Revert back if not clear and reward if helpful
Regards
Byju

Qosmio G30-201 connected to LCD - how to fit the whole screen?

Similar Messages

Maybe you are looking for