Qosmio G30 display flickering and unable to log into Windows

I have to press F5 to make the display visible everytime I boot up. I thought that it was a software related issue and I tried to format the HDD with original recovery CD. However, the screen keeps flickering from the BIOS stage.
Now, it is even worse. The screen is flickering when power up and I cannot log into Windows MCE after the HDD formated.
After reading the related articles and FAQ, I suspect it was a graphic card (hardware) issue.
My graphic card is NVidia Go7600. Is this true and is it a must to change the hardware (graphic card)?
Appreciate your advice before I contact the local support team.
Thanks a lot!

Hi!
Thats a strange issue. Do you have the same problems on an external monitor?
If a display is flickering, the display itself is defective because the FL-tube is causing the error. I think the best is, when an ASP (authorized service provider) checks your Qosmio G30.
Here you can search for one:
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an ASP
Good luck
Bye

Similar Messages

Unable to Log into Windows

I originally installed Windows XP Professional using Boot Camp without a problem. A couple of months ago I installed Parallels and told it to use my Boot Camp partition.
I was able to run Windows through either Parallels or Boot Camp without a problem.
A couple of days ago I tried to load Windows through Boot Camp (for the first time in months, I've been using Parallels every day), I get to the Windows log in screen, after pressing OK the desktop picture comes up, then that Windows error sound plays, and I get a small window with a big red circle with a cross through it (the Windows error symbol), but no text, just a 'OK' button. As soon as I press that, the windows logging out window appears and it takes me back to the log in screen?
Windows still runs perfectly fine through Parallels?
Any suggestions?
Thanks,

Hi and welcome to Discussions,
for troubleshoot you might wanna start with the Safe Boot options of XP as explained here http://support.microsoft.com/?scid=kb%3Ben-us%3B315222&x=10&y=11
Could be a driver or a startup item that is causing the BSOD so using the Safe Mode (minimal) or the enable Boot Logging might show it.
If you can't get to these options, you might try a repair of your XP installation with a boot-up from the XP install CD and using the repair feature.
Since you can read and copy files from your XP partition when in OSX you should have no problems to 'backup' your valuable Windows files.
Regards
Stefan

Unable to log into iCloud because old email pops up requesting password. Password not working and unable to receive reset

I changed the main email on my Appleid a few months back. Everything worked fine until uppgrading to iOS7 on my phone. I am now unable to log into iCloud because the old email pops up and requesting password which is not working. I cannot rest the password because my old email is unvalid as I have changed network provider. The id works fine on Appstore and iTunes so its only iCloud that making trouble.
Any suggestions to remedy this problem?

I'm also experiencing the same issue.
I've had to reset my password 3 times in the last 3 days.
At first, I couldn't get my email. I sweated it out for 12 hours, reset my password and I was good to go again. 48 hours later, I ran into the same issue. Only problem is, not only do I get the 'Incorrect username or password' on my device, but my iCloud.com login no longer works. so now I can't read my messages on the web OR on my device/computer.
I have went to appleid.apple.com and reset my password there: no luck.
I have reset the settings on my device: no luck.
I have Erase and Installed iOS 6.1.2: no luck.
I have restored my device back to factory settings: no luck.
I have performed a DFU restore: no luck.
This is my main account for, well everything.

Since installing the lastest soft wear I have been unable to log into internet banking for nab on the app and via safari? Anyone have an idea why?

Since installing the lastest soft wear I have been unable to log into internet banking for nab on the app and via safari? Anyone have an idea why?m

I experience similar problem with working in internet. Also use Safari.

HT5012 I recently updated my IOS using the beta found on an iTunes account link... Ever since then I've been unable to log into my iMessages and FaceTime account through my iTunes. The only explanation it gives me is that my connection was lost.... What

I recently updated my IOS using the beta found on an iTunes account link... Ever since then I've been unable to log into my iMessages and FaceTime account through my iTunes. The only explanation it gives me is that my connection was lost.... What to do?

It was downloaded through my iTunes account... So im sure it wasn't pirated. It's nothing more than a beta test to work out the bugs. But do u have any suggestions as to how i can about redownloading the same iOS but now the 'bugs' should be all worked out....

HT204053 unable to log into iMatch using Apple Id and password. Msg says i have valid Id for store but not iMatch. What to do?

unable to log into iMatch using Apple Id and password. Msg says i have valid Id for store but not iMatch. What to do?
Is there a way to reset iMatch username and password?

An Apple ID which consists of a non-Apple address can perfectly well be used to create and sign into an iCloud account (most Apple ID's take this form). Your problem is that you can't create an iCloud account on Windows: you can only do it on a Mac or an iOS device. Once created on one of those you can sign into it on Windows using the iCloud Control Panel.

Imac 21.5 (ver 10.6.8) Display flickers and it goes blank

Display flickers and its brightness automatically increases and decreases intermittently. After some time the Display goes blank and it doesn't appear even after pressing the power button or restarting the PC. At times it does appear after pressing the power button frequently or if the PC is left ON for some time. I am using software ver 10.6.8. Want to whether this problem will be resolved after upgrading it to Mavericks. But I am worried that during the downloading if the display goes off and if I have to restart the PC then I will have to start the downloading from the beginning. Please suggest.

If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
Genius Bar Reservation US
Authorized Service Provider

HT4759 I am unable to log into my icloud account rather than entering correct apple id and password, why?

I am unable to log into my icloud account rather than entering correct apple id and password, why?

TThis is A joke there isn't a solution here, just users having issues with no real help. I have the same problem

Unable to log into the portal-After Upgrade from NetWeaver 7.0 to 7.3EHP1

Dear Experts,
We have poltal landscape(NW 7.0 Dualstack SPS27) with our customozed themes and par files(Company name,logos and colours)
Recently we upgraded the one of portal from NW 7.0 to NW 7.3EHP1 . Upgrade has been successfilly completed with small issue.
After upgrade all urls are working(/nwa, /sld) except /irj/portal.We know that NW 7.3 EHp1 accepts only ear file i.e we converted the our customized log on par file to ear file through par migration tool and the same was deployed successfully through NWDS 7.3 version.After deploying we are able to access the
/irj/portal url with our customized par(means ear file) without issues,
We are unable to log into the portal after giving the correct user id and password,getting the portal runtime error as foloows.
Portal runtime error
An exception occured while processing your request.Send the exception ID your administrator
Exception id:
see log files for details about this exception
Default.trc log file(/server0/log)
#EP-PIN-PRT#tc~epbc~prtc~api#C00061FD2733006C00000005000056CB#9034950000000004#sap.com/com.sap.portal.runtime.system.hooks#com.sap.portal.prt.
runtime#J2EE_ADMIN#4##43E00B85A79911E380F800000089DCC6#3a483a0fa79911e3903000000089dcc6#3a483a0fa79911e3903000000089dcc6#0#Thread[HTTP Worker
[@900472845],5,Dedicated_Application_Thread]#Plain##
08:14_09/03/14_0005_9034950
[EXCEPTION]
java.lang.RuntimeException: Could not create Resource Repository root folder in PCD
at com.sap.portal.resource.repository.ResourceRepositorySrv.initRepositoryRootContext(ResourceRepositorySrv.java:140)
at com.sap.portal.resource.repository.ResourceRepositorySrv.init(ResourceRepositorySrv.java:93)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
at com.sap.portal.resource.repository.WebResourceRepositorySrv.init(WebResourceRepositorySrv.java:71)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
        at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
        at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
        at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
        at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
        at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
        at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
        at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
        at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
        at com.sap.portal.resource.repository.WebResourceImportService$ResourceImporter.<init>(WebResourceImportService.java:248)
        at com.sap.portal.resource.repository.WebResourceImportService.importApplicationResources(WebResourceImportService.java:172)
        at com.sapportals.portal.navigation.NavigationMimeRepositoryService.loadAllPicsToWRR(NavigationMimeRepositoryService.java:186)
        at com.sapportals.portal.navigation.NavigationMimeRepositoryService.init(NavigationMimeRepositoryService.java:160)
        at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
        at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
        at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
        at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
        at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
        at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
        at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
        at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
        at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
        at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
        at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
        at com.sap.portal.pcm.iview.admin.PcmIviewCommon.getAdditionalAttributes(PcmIviewCommon.java:358)
        at com.sap.portal.pcm.iview.admin.PcmIviewCommon.initLayers(PcmIviewCommon.java:173)
        at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:177)
        at com.sap.portal.pcm.page.admin.AdminBasePage.getCustomImplementation(AdminBasePage.java:76)
        at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:642)
        at com.sapportals.portal.navigation.LightningHelperService.getFrameworkPageAttributesValues(LightningHelperService.java:143)
        at com.sapportals.portal.navigation.LightningHelperService.getFrameworkPageAttributesValues(LightningHelperService.java:171)
        at com.sapportals.portal.navigation.fpm.util.PhaseConfiguration.prepareAttributes(PhaseConfiguration.java:71)
        at com.sapportals.portal.navigation.fpm.util.PhaseConfiguration.storeRelatedAttributesInSharedStorage(PhaseConfiguration.java:35)
        at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doFrameworkPhase(NavigationFpmListener.java:535)
        at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doPhase(NavigationFpmListener.java:122)
        at com.sapportals.portal.pb.fpm.FPMContainer.distributeEvent(FPMContainer.java:63)
        at com.sapportals.portal.pb.fpm.FPM.doDocumentHook(FPM.java:179)
        at com.sapportals.portal.prt.service.document.DocumentHookMulticaster.doDocumentHook(DocumentHookMulticaster.java:100)
        at com.sapportals.portal.prt.service.document.DocumentHookService.doDocumentHook(DocumentHookService.java:119)
        at com.sapportals.portal.prt.service.document.DocumentHookServiceNew.doDocumentHook(DocumentHookServiceNew.java:186)
        at com.sapportals.portal.prt.connection.PortalHook.doDocumentHook(PortalHook.java:665)
        at com.sap.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:183)
        at com.sap.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:107)
        at com.sap.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:141)
        at com.sap.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:206)
        at com.sapportals.portal.navigation.PortalLauncher.doContent(PortalLauncher.java:116)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:213)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:129)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
        at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
        at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
        at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
        at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
        at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
        at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
        at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
        at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
        at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
        at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: javax.naming.InvalidNameException: Character not allowed: ':' in 'pcd:resource_repository'
at com.sapportals.portal.pcd.pl.PcdName.checkComponent(PcdName.java:64)
        at com.sapportals.portal.pcd.pl.PcdName.checkNameComponent(PcdName.java:39)
        at com.sapportals.portal.pcd.pl.PcdName.padd(PcdName.java:636)
        at com.sapportals.portal.pcd.pl.PcdName.add(PcdName.java:626)
        at com.sapportals.portal.pcd.gl.util.StringUtils.tokenizeIntoPcdName(StringUtils.java:112)
        at com.sapportals.portal.pcd.pl.PcdName.appendUrlInternal(PcdName.java:408)
        at com.sapportals.portal.pcd.pl.PcdName.<init>(PcdName.java:245)
        at com.sap.portal.resource.repository.ResourceRepositorySrv.initRepositoryRootContext(ResourceRepositorySrv.java:121)
        ... 132 more
1)We are suspecting this issue is related to the theme issue.How to update the theme in the upgraded portal(have a backup of themes)
2)Want to know if we update a theme where it stored at the operating system level(in NW 7.3 EHP1 as well as NW 7.0)
3)Is there any post steps after portal upgrade.
Request you suggest.
Regards
Maruthi

Hi
Refer the SAP Notes
1942399 - Fix usage of unregistered class loader while processing HTTP request in an application being updated or stopped at the same time
1744820 - Migration 7.3 fails while executing migration of pcd_upgrade
1703578 - WPC migration stops during connection creation
1918086 - ERROR: Unable to get iView
Regards
Ram

Crystal Reports Server 2008 trial install - unable to log into CMC

Hi,
I have been looking for a way to host my existing Crystal XI reports on our in house web application rather than using a thick client application with cview. I was told that the options were Crystal Reports Server 2008 or Visual Studio 2008. I have downloaded trials of both and am currently testing.
After installing Crystal Reports Server 2008, including MySQL DB and Tomcat web server, i am unable to log into any of the applications with the error that:
Error: Server SCOTTPC:6400 not found or server may be down (FWM 01003) null
After seeing this i checked the services on my test machine and found that the Server Intelligence Agent was not started. So i tried starting it and recieved the generic windows message:
Service on local computer started and them stopped. Some services stop automatically if they have no work to do ... etc
After multiple reboots and reinstalls i am still unable to use any aspect of the application as i am unable to log into the CMC as the server is down. Now i am new to Crystal reports and web servers so have a very limited knowledge of whats going on here - i am primarily a DBA. From what i can tell MySQL does not even appear to be installed but i cannot be sure.
Any suggestions?

ok... after research it seems a DSN has not been created.
Also when trying to start the server intelligence service i see the following in the application event viewer:
[Node Name: SCOTTPC]
[User Name: SYSTEM]
Server Intelligence Agent has failed to initialize because the bootstrap file C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\_boe_SCOTTPC.bootstrap is missing information about the CMS cluster. Please restore your bootstrap file from your backup.
i have recreated the bootstrap file but still get the same error.
i have SQL Server 2005 installed on this rig as well - could this be causing the issue? Would it be better for me to integrate this to SQL Server rather than using the MySQL DB that comes with Crystal server 2008?

When deleting an e-mail on Gmail, the display reverts to the Gmail log-in window

When deleting an e-mail on Gmail, the display reverts to the Gmail log-in window. Internet Explorer does not have this problem. Firefox did not have this problem until a few weeks ago.
Firefox version 1.9.2 3855

Ernie,
The OP appears to be concerned about sent messages in particular, which, as you know, wouldn’t be on the server no matter what the settings and would certainly be lost as a result of deleting the account.
<hr>
thesameage,
Deleting a POP account only deletes the messages stored in the account’s mailboxes. If you move those messages to custom “On My Mac” mailboxes or to the mailboxes of another account, you won’t lose them. It’s not that Mail goes after your mail trying to delete as much as it can. It’s just that if a mail account is deleted, then its mailboxes cannot exist anymore...
Here’s the title of some Mail Help articles that explain how to create “On My Mac” mailboxes and organize your mail there however you wish:
Creating a mailbox
Organizing your email
Alternatively, a quick and simple procedure to create a duplicate of the account’s mailbox structure as “On My Mac” mailboxes would be importing them doing File > Import Mailboxes, choosing Mail for Mac OS X as the data format, and selecting the ~/Library/Mail/POP-username@mailserver account folder.
That said, instead of deleting the account right away, you can just disable it (i.e. turn OFF Preferences > Accounts > Advanced > Enable this account), leave it that way for some time, and delete it only after making sure you didn’t miss anything while the account was disabled.
BTW, if you back up your data, and the ~/Library/Mail folder in particular, you won’t have to worry about accidentally losing anything as a result of doing something like that...
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

Application user RMCM was found to be deleted from CUCM but agents unable to log into ACD queue was reported 2 weeks later

Hello All, During an investigation Application user RMCM was found to be deleted from CUCM as per CUCM logs but the first issue of agents unable to log into ACD queue was reported 2 weeks later following a publisher reboot, I am trying to understand what could have caused this ? The reboot obviously could not have made any changes but the logs says RMCM users deleted on 09 May but issue was reported on 20 May and in the meantime services were said to be working without interruption . Can i have some suggestion to understand this to explain customer ?

The RMCM user being deleted might not have triggered a JTAPI update on the UCCX side. The publisher reboot which restarted CTIManager would have definitely triggered the update and forced UCCX to re-authenticate with the now non-existent user.

Report Viewer unable to log into the database

I'm fairly novice to ZFD Inventory and have a reporting issue when attempting to run from ConsoleOne (1.3.6f). Receive a Report Viewer error that states "unable to log into the database. Ensure the ODBC driver...".
TID 10094443 describes my symptom exactly but apparently doesn't apply. It applies to ZFD6.5 and we're running 7. Does the Oracle fix it refers to even apply to ZFD7 Inventory? If not, what does address my issue?
Is it SQL now?
Thanks for any help.

Originally Posted by youngj
I'm fairly novice to ZFD Inventory and have a reporting issue when attempting to run from ConsoleOne (1.3.6f). Receive a Report Viewer error that states "unable to log into the database. Ensure the ODBC driver...".
TID 10094443 describes my symptom exactly but apparently doesn't apply. It applies to ZFD6.5 and we're running 7. Does the Oracle fix it refers to even apply to ZFD7 Inventory? If not, what does address my issue?
Is it SQL now?
Thanks for any help.
If you are using the Sybase database with ZDM7, take a look at the file \database drivers\odbcreadme.txt file on the Novell ZENworks 7 Companion 2 CD (downloadable from novell.com if you don't already have it). Page 347 of the ZDM 7 Install Doc also mentions this procedure:
http://www.novell.com/documentation/...dm7install.pdf

Unable to log into FaceTime it says "the server encountered an error processing registration please try again later. Apple ID is verified ok but could not login. Please help. Thanks

Unable to log into FaceTime it says "the server encountered an error processing registration please try again later. Apple ID is verified ok but could not login. Please help. Thanks

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

Unable to log into itunes & app store

I am unable to log into itunes & app store from my iphone5s OS 7.1.1. The apple ID works on the apple site and from my apple tv and ipad etc. I have rebooted the iphone, deleted icloud and logged back in successfully. I can use find my iphone and see my other devices. When I go to settings > iTunes & App Store > enter the apple ID and password and press sign in > it shows a activity circle at the top by the wifi indicator but then nothing else happens. Settings > iTunes & App Store still has my username and password. I can press sign in again but nothing happens.
I've tried to go into iTunes Store and look at my previous purchased movies but it keeps prompting me to sign in.. I use existing apple ID > enter ID and pass > and it just loops the same process over and over.. use existing apple ID > enter ID and pass > use existing apple ID > enter ID and pass > etc..
Thanks for the help.

Hello Anand,
To troubleshoot your problem, follow the steps below:
1. Delete the file - Macintosh HD/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
2. Restart OS X
3. Try logging into Mac App Store again.
All the best !

Qosmio G30 display flickering and unable to log into Windows

Similar Messages

Maybe you are looking for