Qosmio G30-E10: Display resolution switches from 1920x1200 to 1024x768

Hello,
Qosmio G30-E10 Display resolution switches sometimes from 1920x1200 (my default) to 1024x768 after returning from Standby or Hibernation
i run Vista Ultimate, newest Display Driver from Toshiba Download Area.
This doesn't happened any time, but sometimes!
Any solution for this nerved situation.
Kind regards
Uwe Meyer, Germany

Hi Uwe
A friend of mine has tested the G30 PQG32 series and he has never noticed such issues.
He has set the G30 to standby mode and hibernation mode on different ways and everything looks ok! The display resolution stays on 1920x1200.
By the way; only the Qosmio G30 with HD-DVD drive supports this high resolution.
Now I would like to clarify the zooming utility questions;
The FN + Space combination does not enable the zooming utility but it changes between the display resolutions!!!
I have used the FN + Space and it changed to 1024x768 or 800 x 600. It depends how often you will use this combination.
The Toshiba zooming utility which can be enabled using the FN + 1 or 2 zoom in or zoom out the images of internet explorer, word, etc
So finally the FN + Space and FN + 1 or 2 are completely different functions!!! Please don't mix it!
> think, it has something to do with the Toshiba Zoom-Utility, because it is possible to switch back to 1920x1200 with the Zoom-Utility
I think you have used the FN+Space and this has changed the display resolution. This is ok!

Similar Messages

  • Qosmio G30-E10: No Playback of DVD`s with "Toshiba HD DVD Player"

    Hi all,
    If I try to playback a normal DVD (not a HD-DVD) with the Toshiba HD-DVD Player Software, I get the following message from the HD-DVD Player:
    "This player has no DVD Playbackfunction. Please try an appropriate application for DVD playback"
    HD-DVD Drive has current firmware. HD-DVD Player is on current patchlevel 4.20.16.
    DVD-Playback with InterVideo WinDVD works fine!
    Notebook is a Qosmio G30-E10, with Vista Ultimate (Factory standard).
    Any ideas?
    Thanks in advance.
    Sincerely
    Uwe

    Hello
    Have you ever ask yourself why Toshiba install two players on this HD-DVD notebook? Probably not.
    With short words: HD-DVD player is designed for playing HD-DVD movies only. For watching usual DVD movies use DVD player. For this purposes use WinDVD player.
    Bye and enjoy your great Qosmio notebook.

  • Why does the highest quality ('Display') resolution vary from exporting one slideshow to the next?

    When exporting a slideshow from iPhoto I'm selecting the highest quality (Display). I noticed that resolution setting (Display) varies depending on which slide show I want to export (i.e. 1000 x 800, or 1420 x 800). Why?

    When exporting a slideshow from iPhoto I'm selecting the highest quality (Display). I noticed that resolution setting (Display) varies depending on which slide show I want to export (i.e. 1000 x 800, or 1420 x 800). Why?

  • Retina Display Resolution Settings & Limitations

    Are there only five settings that will work for the Retina display?   Display > Resolution > Scaled options only include five clickable icons from "Larger Text" to "More Space"
    Also, is there a way to change the choices from five cute pictures of text snippets to a list of actual pixel dimensions (e.g. 1920x1080, etc.)?
    MBPro mid 2012, OSX 10.8.5.

    Check out Eye-Friendly Display Resolution Switcher in the App Store. It'll give you actual pixel dimensions as well as more resolutions to choose from, including native (if your eyes are sharp enough).

  • External Display resolution problem after resetting PRAM

    Gello, I've got Fujitsu-Siemens P19-2 monitor hooked up to my MbookPro and after resetting PRAM the correct display resolution disappeared from the "Displays" menu in System PReferences.
    So did the refresh rate option...
    What do I do?
    I really need to change the refresh rate and the resolution, but the refresh rate button is grey and unclickable, and the resolution simply isn't there (I need 1280x1024).
    REsetting PRAM and SMC didn't help.

    After a couple of resets everything went back to normal

  • Qosmio G30: No Sound in Live TV - Media Center 2005

    For two months I have been using a Qosmio G30.The sound is good from all the functions on the PC except Live TV in the Media Center Edition 2005. The picture is good except there is no sound..I have checked all the forums and cannot find a solution to this problem.
    Hope someone can help me.
    Alick

    It depends on the country you are living in...
    please look at this thread:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18085&tstart=320
    My solution to the same problem related to the country settings in media center:
    I needed to change the country settings from Romania (where I am living) to Germany!
    that's all...

  • What would cause my iMac's desktop resolution to briefly readjust whenever I switch from my user to another?

    I recently started to notice that whenever I switch from one user account to another on my recently purchased iMac, the resolution of my desktop wallpaper very briefly readjusts.  Both users have the same default resolution and are using wallpaper that came standard with Mavericks.  Does anyone have any suggestions as to what could be causing this?
    Thanks!

    Hello there, Conor68.
    The following Knowledge Base article provides some great recommendations for troubleshooting display issues on your Mac:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Once you're reviewed the recommendations in regards to updates, this portion of the section on "No video or no signal, image distortion, "snow," or flickering" is useful:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Qosmio G30 display flickering and unable to log into Windows

    I have to press F5 to make the display visible everytime I boot up. I thought that it was a software related issue and I tried to format the HDD with original recovery CD. However, the screen keeps flickering from the BIOS stage.
    Now, it is even worse. The screen is flickering when power up and I cannot log into Windows MCE after the HDD formated.
    After reading the related articles and FAQ, I suspect it was a graphic card (hardware) issue.
    My graphic card is NVidia Go7600. Is this true and is it a must to change the hardware (graphic card)?
    Appreciate your advice before I contact the local support team.
    Thanks a lot!

    Hi!
    Thats a strange issue. Do you have the same problems on an external monitor?
    If a display is flickering, the display itself is defective because the FL-tube is causing the error. I think the best is, when an ASP (authorized service provider) checks your Qosmio G30.
    Here you can search for one:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Find an ASP
    Good luck
    Bye

  • When I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

    when I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

    Hi fabiangs,
    I'm not sure that I follow. Are you saying that when you open a PDF file in Acrobat or Reader, that the display resolution changes automatically on your system?
    What version of Acrobat/Reader are you using? Do you see this same issue in other files/applications?
    I look forward to hearing back from you.
    Best,
    Sara

  • I am unable to play a downloaded HD movie from iTunes. SD movies play OK. An error popped up saying something about the display not suitable for HD movies but now all I get is a blank window. I have tried changing the display resolution to no avail.

    I have sownloaded an HD movie from iTunes store and when I attempted to play it on my Windows 7 PC a error message popped up saying something about the display not being compatible for HD movies. I have tried changing the display resolution several times but it didn't help. Now it just comes up with a blank screen when I attempt to play it. SD movies work fine. I have the latest version of iTunes installed.
    Can anyone help me resolve this problem?

    Apparently the display is required to be HDCP compatible to view HD movies in iTunes. My display isn't so this is my problem. I contacted Apple support and they have agreed to credit me for the HD movie and I have now downloaded the SD version.

  • HT201269 I switched from an iPhone to an LG g2, but now all my iMessages keep going to my old iPhone rather than the new one.  I know the resolution to the problem is to turn off my iMessage, but I no longer have the iPhone because I sold it to the phone

    I switched from an iPhone to an LG g2, but now all my iMessages keep going to my old iPhone rather than the new one.  I know the resolution to the problem is to turn off my iMessage, but I no longer have the iPhone because I sold it to the phone carrier.  Question is how do I turn my iMessage off through a computer that is not a mac. 

    http://support.apple.com/kb/TS5185
    last paragrapgh of Resolution

  • I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    Back up all data. Rebuild the mailbox.

  • How to switch to S-video- or AV-input on Qosmio G30-188?

    Hello!
    How can I see the pictures which are coming in from the av- or s-video-input on the right side of my Qosmio G30-188?
    I couldn't find a way in the media centre.
    Please help.
    Thanks in advance.

    Hi
    You can start the Media Center Edition by pressing the TV button which is placed above the F keys! As far as I can remember its a first button.
    Pressing this button will launch the MCE that allow you to capture a signal from the s-video in port.
    Did you take a look into the user manual? Please do it! The preinstalled user manual provides many useful information and hints regarding the MCE and video in port ;)
    Please also take a look here into your first thread and don't post twice:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=25917
    Cheers :)

  • Upgraded to 4 and have noticed that when switching from page to page you get an annoying blink before the next page displays. Any suggestions?

    When switching from tab to tab, Firefox 4 has a tendency to blink before displaying the new tab. Just a millisecond or so but can be annoying.

    If that doesn't work, try power cycling your router, printer, and your iPad/iPhone in that order. To do this, follow these steps:
    Unplug the router and printer from the power and shut off the i-devices. Let them sit for about 30 seconds and then plug just the router in.
    Once the router is completely back online (usually takes about 30-60 seconds) plug the printer in. Wait until it is back on its home screen.
    Turn the i-devices on.
    Try to print again.
    Let me know if this helps!
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • HT4211 How do you switch from multitasking mode back to normal display mode?

    How do you switch from multitasking mode back to normal display mode?

    You mean switch from showing the recently used apps bar or dock back to regular home screen display mode?
    If so, select the Home button.

Maybe you are looking for

  • Communication Error with HP 8600 Fax

    I have a LENOVO_PN_90BG0003US running Windows 8.1 with a 64-bit operating system.  I have installed an HP Officejet Pro 8600 Plus All-In-One Scanner/Printer/Fax.  I am able to print and scan, but cannot setup the digital fax.  I get a communication e

  • Cannot "Add" a printer

    When adding a printer under "Printer Setup Utility" get the error message: "An error occurred while trying to add the selected printer" 'server-error-service-unavailable' Have downloaded the latest HP LaserJet 1200 drivers, etc. BTW, printer was work

  • Routine in InfoPackage DataSelection

    Hi,      Can someone provide me the ABAP code for the below mentioned scenario. In the InfoPackage, I want to extract only those Business Partners which are available in the other DSO. Thanks in Advance Mahesh Kumar

  • How do you install while still using safari

    I am using safari and want to upgrade to OSXLION . what steps must I do first?    The other ? is are there operating issues with lion?

  • Time-dependency in master-data

    Good mornging BW-community I still have a problem during my query. I have time-dependent master-data (an item infoObject with it's corresponding price as an attribute) and want to show the item prices depending on the date of sale on my bill. I can p