Qosmio G30: Monitor Phosphors needed to configure Adobe Gamma

I am calibrating my monitor with Adobe Gamma and need to know what Phosphors it uses. The options are:
HDTV (CCIR 709)
EBU/ITU
NTSC (1953)
P22-EBU
SMPTE-C (CCIR 601-1)
Trinitron
Custom...
Can anyone help?
Thanks

Please correct me someone, but TFT monitors don't use phosphors at all :) (unless they mean something else by this calibration)
Their technology is based on Thin Film Transistors rather than the old classic way of having electrons created in a tube shoot towards the phosphor-front on the monitor.
Only Plasma screens and CRT monitors would need such adjustment.
Btw, using a screen-saver on TFT screens is unnecessary as this technology does not BURN IN a picture like on phosphor based screen. Only the Backlight gets weak which means it's better to "Power off" your monitor rather than make a windows logo pop up from one corner to the other every couple of seconds.
My 2 cents to this, sorry if I was of no help
Regards,
electrochain

Similar Messages

Elements 11 adobe gamma installation

I'm trying to reset my monitor settings and know the adobe gamma utility can do that ... I can't find it on my elements 11 install disc or on my system. I'm running Windows. Thanks,

To add to Barbara B.'s response it is also possible to characterize your monitor within the operating system settings for Windows 7, 8, and Mac OS 10.0 and later.
For Windows you can access the feature in the Color Management Control Panel.

Qosmio G30 - black screen on external monitor

Qosmio G30 (PQG32E) running Vista Home Premium, NVIDIA GeForce Go 7600 driver, 7.15.10.9813
I cannot get a picture on an external monitor (tried two different monitors). Specifically:
'Windows Mobility Center' will recognise that a monitor is connected
'NVIDIA Control Panel - Change Display Configuration' will recognise the external monitor ('Select the displays you would like to use' shows 'Laptop Display + Sony SDM-HS73', which is the plugged-in ext monitor)
but no matter what configuration I try, using Fn+F5 or Change Display Configuration, I cannot get anything but a (backlit) black screen on the external monitor.
The monitor is receiving a video signal correctly: when turned off under a laptop-only Fn+F5 setting, it shows a 'no signal' warning, but when turned on again I just get black.
I have tried changing resolution settings for the external monitor. They exactly match the monitor's native resolution. Still nothing.
Tried 'Clone' mode and 'Dual View' mode.
Tried various different orders of switching the laptop and monitor on, plugging and unplugging, etc.
Have installed latest driver from this Toshiba site (as above). Have NOT tried installing any other driver from the NVIDIA site, since it warns to use Toshiba's - but is that worth a try?
The laptop's own screen and all other aspects of video are fine.
It has worked ok in the past (I think before I did the upgrade to Vista, when it was still on XP).
Do I just wait for another driver update from Toshiba, and perhaps Vista SP1?
I'm really hoping this is not a hardware issue, since the monitor is recognised etc....
Jonathan

What port did you use?
The external monitor (analog) port or the D-video out port?
As far as I know if you have used the external monitor (analog) port then you should choose the Analog display in the nVidia -> current display
Then you could use the button FN+F5 to switch between the both displays.

I need to configure Acrobat to display PDF files in Safari, but I have a lot of troubles to do it.I have OX S yosemite, I unistalled adobe acrobat, I closed safary and I installed the new version of adobe acrobat.

Dear everyone
I need to configure Acrobat to display PDF files in Safari, but I have a lot of troubles to do it.
I read a european commission document explaining that
http://ec.europa.eu/research/participants/data/support/sep_usermanual.pdf
If Safari does not display pdf forms in the browser window, uninstall all older versions of Adobe Reader and download the most recent one. First close Safari and then install Reader. Launch Safari and you ought to be able to open the pdf files inside the Safari window. If you install Adobe Reader 10.1.x without first closing Safari, Safari will not display the pdf file inside its browser window until it is re-launched. For further help, please see http://helpx.adobe.com/acrobat/kb/troubleshoot-safari-plug-acrobat-x.html
I have OX S yosemite, I unistalled adobe acrobat, I closed safary and I installed the new version of adobe acrobat
but when I open a web page that I need to allow me to display and modify PDF files it is not working.
I checked the following web page
Troubleshoot Safari plug-in | Acrobat X, Reader X
that is recommending the following:
The AdobePDFViewer plug-in is used to display PDF files in Safari using Acrobat and Reader.
This plug-in is installed as part of the Acrobat X or Reader X installation. The location of this plug-in is:
/Library/Internet Plug-ins/AdobePDFViewer.plugin
but after the new installation with this folder is completely empty and I am still
unable to open these pdf.
Does anybody knows anything else I can do?
Best regards
Ramon

Moving this discussion to the Adobe Reader forum.

Qosmio G30-126 monitor become black and FN buttons don't work

Hello,
I have small problem, ehm two problems but perhaps small for you :)
Last week I install Vista ultimate WITHOUT RECOVERY CD..
It's OK, but I'm closing cover of notebook and instantly open, monitor become black and i can't anything do beyond restart .
In Control panel in possibilities of power supply , bookmark "options for closing pad" doesn't work.
Maybe it is by, because i don't driver if exist
And second problem maybe related with first but this is mistake by it, because I wasn't discover drivers because i don't hidden toolbar on up on dispay in Windows, where is standartly is.
I don't work major part hidden functions under key FN ( I think FN + F2,F3...F12) plus keys be the side POWER without multimedia keys on music..
Thx for help !!!
Sry for my bad english
Message was edited by: Martiosso

Hi Martin
First of all its interesting if you have downloaded and installed all Toshiba Vista drivers which are released on the Toshiba European driver page?
All drivers must be installed in the right order!
If I'm not mistaken the Qosmio G30-126 belongs to the PQG32E series. It was delivered with HD DVD drive and therefore you should choose the drivers for Qosmio G30 HD DVD (PQG32E)!!!
Please check firstly the Installation Instructions txt file and then install all drivers like mentioned in this document.
Regarding the display issue;
You should install the right NVIDIA driver from the Toshiba page!!
The FN keys and control buttons dont work because the Toshiba Vista Value Added Package was not installed. This package contains different applications which are necessary to get all Toshiba functions running!
Good luck

Need to configure output type for adobe form

Hello All,
I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
I'm little confused, Pls I need your help.
Thanks in advance,
Chandra

Hi,
Just before few weeks we did this task.
Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
2. Then use tcode tcode NACE and select EF as application and click output types button on the application tool bar. Select NEU output type and double click processing routines on left side.
3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
4. For form names we have two options in NACE tcode.
One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
If any queries please post it.

Qosmio G30-10E - need mainboard partnumber

Hi,
i need the Partnumber of my mainboard, because it's faulty and i want to replace the mainboard,
and my dealer wants the exact partnumber to find the right sparepart.
But i dont find the partnumber on the board, the one and only i found is:
+A5A001964 / 030 A0 / C074AGOT+
+Model: Qosmio G30-10E+
+PQG32E-03903NGR+
+S/N: 47816895G+
And my dealer says, the partnumber looks like this example: P000462640
Thank you

As far as I know Toshiba service partner has such info. They have access to Toshibas database and can check this. As far as I know Toshiba has offered two platforms for this Qosmio G30 so it is very important for you to get mainboard for PQG32E.
I mean if you have this number you can order it alone and you don't need some special dealer.
Try to contact nearest Toshiba service provider and ask for help.
It is really not easy to help you with this.
And yes. Part number is something like K000xxxx.

Qosmio G30: Need XP drivers tools CD-ROM in english

Hi!
I'm an italian owner of Qosmio G30, and I want to use Windows XP Pro in english. Is there any way or any place on the Net to download the ISO of Toshiba CDROM Tools and Drivers in english?

Hello Cesare
All you must do is to visit Toshiba download page under http://eu.computers.toshiba-europe.com/ > Support & Downloads > Support homepage. There you can find download section.
Everything you need you can find it there on almost every European language. ISO file is not available just single drivers, tools and utilities.
Thats all.

QosmioPlayer needed for Qosmio G30-177

I've just bought a Qosmio G30-177 from a friend, but it's not a brandnew laptop
and this is my problem. My Lappy cannot using QosmioPlayer , when my lappy turn off i press one of the 11 AV button but my lappy doesn't start QosmioPlayer , instead of that it go to window Vista. After researching by myseft on this forum , i think that is because i don't have a partition for QosmioPlayer on my lappy and i don't have a Media recovery disc .
So i write this thread to ask for some advice.
Because i live in Vietnam so it's not easy for my to order a recovery disc from Toshiba service , so does anyone know how to download an ISO file of that disc?
thanks

Hi
WinRE partition belongs to the Vista OS. Usually the partition is hidden and its needed only for the Vista backup files.
Vista supports an own reparation option and if something will go wrong with your OS, you could use such option to repair the OS. In such case Vista will use the files which are stored on the WinRE partition.
_Regarding the Qosmio Player issue;_
The point is that you will need an original Toshiba Recovery disk if you want to use the Qosmio Player.
Without recovery disk you will be not able to use this tool.
On the Toshiba page you can find the Qosmio player. Its in the Win MCE download area.
This is a ISO image and you can burn it and create a Qosmio Player recovery CD.
You will have to install firstly the Qosmio player booting from this disk.
This will install the Qosmio player on the HDD.
After you have finished the Qosmio player installation you should use the Toshiba recovery to install the Windows operating system.
Greets mate

Searched for driver updates - do I need them all? Qosmio G30-175

Hello people, new Toshiba user here.
Last week I bought a Qosmio G30-175. After a Bluetooth installation problem everything is fine.
I updated BIOS today to v1.70 (even though the Windows version wouldn't work)!
I thought I would do a search for any driver updates and I find that 86 updates appear!!!
Could somebody tell me whether all these updates are merely available for use, or does my particular laptop require all these updates?
Thanks in advance.

Hi
What?? 86 drivers??
Are you sure? I have checked the Toshiba driver page of Qosmio G30-175 (PQG30E) and found only 50 drivers for Windows XP MCE.
But the list of 50 drivers contains double entries! For example there are 2 BIOS, 2 LAN drivers, different modem drivers, etc listed.
You should install only the drivers and utilities which are listening in the Installation instruction document. This guide line is important and you should follow this guide line if you install the Toshiba drivers manually.
You will find the document also in the driver section

Need help with my Toshiba remote control and receiver for Qosmio G30 161

Hello to all
I have a Toshiba Qosmio G30-161 and with it I have a Toshiba remote control and a Toshiba remote control receiver, this is the first time I have used it (tried to that is), my problem is the remote is not working on the computer when I press any program buttons the computer does nothing.
I have installed four brand new AA batteries and the remote works fine its sending signals to the receiver, the receiver the detecting the remote as a red light appears every time you press a button and as for the computer I have checked the drivers and the USB is picking up the receiver as a E-home remote receiver which I have checked with Toshiba and that is correct, so all in all the remote is working, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but this still has done anything. I have spoken to Toshiba help and support and the end result is they are not sure what the problem is. Can anyone help I require the remote for slideshows for customers as I??m a photographer.
Also to confirm I am running Windows XP MCE addition.
Anthony Worlock

Hi there,
this remote contol works, if you use it without any special drivers and special software, only in the Media Center.
But if you install such stuff like [WinLirc|winlirc.sourceforge.net] then you should be able to get some functions for your presentation.
Please try this tool and check if it works.
By the way: If I were you I would first read the Manual and FAQ of WinLirc before starting because its a little bit tricky to handle the program. :) (Too many settings :D)
Greets

How to connect a Qosmio G30 to the TV

Could someone please help me. I am not at all good with computers so really need it. I want to conect my Qosmio G30 to my TV.
It' s an old TV not LCD or plasma. I have a cable with my laptop which connects from the laptop to the TV via a scart connection. I then pressed FN with F5 and the G30 screen went blank and nothing happened. I did FN + F5 again and the picture returned on the G30 with much larger icons etc, but nothing on my TV.
I was advised to mess around with my display settings and enable a second monitor. I did this and followed my actions above. I got a really dark picture for a few seconds on my TV and then nothing! I have been told today to mess around with my NVIDIA settings and this should enable a scart TV connection. Could anyone please give me a definitive answer???
I apologise for my clear lack of knowkedge...

Hello
I do not know how old is your notebook but almost all older TVs have separate channel that can be used if the external device is connected. Check the remote control of your TV. There must be a button with symbol that looks like arrow to right that shows into the circle.
http://www.2ourgoal.com/UploadFiles/200732721729797.jpg - button near the 0 on the right side. Try please to use this channel on the TV.

Qosmio G30 freezes upon Norton Internet Security 2008 startup

Norton Internet Security 2008 will freeze my computer as soon it tries to load and the only way to go on is to restart the system by pressing the on/off-button.
My notebook is a Toshiba Qosmio G30-177 (Model No. PQG32E-02G022GR) with Vista Ultimate and NIS2007 pre-installed. I have no problems with this NIS2008 version on my other notebook (Qosmio F10 - PQF10E-02300JGR, WinXP MCE).
NIS2007 runs fine on my G30 and I do not have any problems at all, but newer versions of NIS seem to get in conflict with my system:
1. I am able to install and run the new version, download all updates and adjust the settings. Maybe one or two days later my computer will freeze after start exactly when the tray icon of NIS appears. For a couple of seconds there is just no response of the system at all and the LED's of my notebook show that all HD activity has stopped. After being idle for these couple of seconds, the cooling fan will start to operate at maximum power, creating a tremendous noise I never experienced before, not even while the CPU was running at 100% for some time due to other programs. Forcing a restart is all I can do.
2. Now this time, I successfully restarted my notebook again (took some attempts) and it suddenly did not freeze. Then I disabled firewall and auto-protect permanently, so there was no freezing upon startup and I just had to manually activate both firewall and auto-protect after start. In order to prevent freezing again after reboot, I always disabled NIS before shutdown. For the next one or two days this workaround was quite successful.
3. All of a sudden, after one or two days, this workaround is going to become useless, because the system starts to freeze again at the very moment the tray icon appears. In this case, restarting has no effect at all, and NIS will continue to freeze at startup. I also tried to prevent NIS form starting by no longer allowing ccApp.exe to automatically run upon start (administrative tools > system configuration > "startup" tab). This is successful and my notebook is able to start normally, but if I later try to start NIS manually, it will freeze again.
I had this problem since NIS2008 was just released, so I thought that meanwhile a Windows or Norton update might have fixed the issue, but this weekend I gave NIS2008 another try without success. I am almost sure that the problem is not caused by any other software than Windows and/or Norton, because I also tried to install NIS after a full system recovery, thus having only pre-installed NIS2007 and Vista on my notebook. I did use the Norton removal tool and followed the deinstall instructions before trying to install the newer version of course.
My last hope was that the NIS2009beta version somehow would not freeze my system, but it does. It does not matter if I try to run 2008 or 2009beta version, the problem is exactly the same.
What really drives me almost crazy is the fact that NIS runs perfectly for some time, then needs a rather small workaround, and then after some time totally refuses to work. In these couple of days I did not change any system settings, install or deinstall any programs or did anything that I felt could conflict with NIS...
So far, I have no idea of a solution and have to use NIS2007 again.
Does anybody know how to solve this problem?

Hi !
I use NIS since 2001 and never had any serious trouble with this software.
There could be some compatibility problem, but I don't think that Vista is causing it, because otherwise a lot more people should have the same problem. Even the installation of all current Windows, NIS and Qosmio updates did not solve it. Of course I tried to get help using Symantec's Support and their user forums, but without success. This problem seems to be a rare one (unfortunately for me). I tested the NIS2009beta and even though it's a new version, the PC freezes again when this program starts. And this made me think that maybe a service or setup by Toshiba causes the problem and other Vista users are not affected. It's a strange thing that the pre-installed NIS2007 version is running fine...
Cheers,
Mario

Can I put Blu-ray drive on Qosmio G30?

Hi all,
I have a Qosmio G30-163 with an HD DVD Drive (MATSU****A G8CC00031720) and I am currently in the process of upgrading it.
I recently bought a 4GB RAM upgrade kit from Crucial (CT2KIT25664AC667) and am looking into further upgrades.
Does anyone know if it is possible to replace the HD DVD Drive with a Blu-ray drive?
My research has led me to the Sony Optiarc BC-5500A which I have found has the same height dimension (12.7mm) and also the same interface connector at the rear (E-IDE).
I have read in the forums that someone has managed to use a similar drive on a Qosmio and that the drive may need to be configured to slave mode as opposed to master.
If anyone knows if this would work or has any further information I would greatly appreciate it!
Regards,
Luke{color}

Well, I sent the same question to Toshiba Support, and they got back to me the next day - How's that for support!
What they said was:
"we think it is likely that the Blu-ray drive would work so long as it physically fits and it has the same adapter. Older systems will require enough graphics processing power to cope with Blu-ray. This system has the NVIDIA GeForce Go 7600 which should cope with it.
We cant guarantee that this drive would work but we think it likely that it will but you install it at your own risk.
Prior to installing more modern hardware it might be wise to check that you have the latest BIOS version."
This sounds very promising to me, so I am seriosusly considering buying the Blu-ray drive!
Does anyone have any experience of using Sony Optiarc products?
Regards,
Luke

Qosmio G30 - New CD/DVD drive doesn't work properly

Hiya all
I'm hoping someone can help me. I have had to replace my TS-L802A drive with another of the same model, except that when I replaced the drive I have problems booting from CD and the laptop (Qosmio G30) rejects it by saying CD-ROM error on startup.
I managed to install the operating system from a flash drive and it works fine except for the cd rom side of things. Do I need to flash the drive in order for the laptop to recognise it? If so how do I go about doing this. I'm thinking that the chipset for the optical drive is set as slave or something and not master.
Please help!

the drive wont show in the bios, the bios is wierd, it wont show the model number or name of any devices. is there a difference between a setup and the bios or are they the same thing. i cant configure anything. i have my old drive working at the moment but its badly damaged although it still reads disks hence the reason i managed to install an operating system. are there certain drives set as master/ cselect/ slave if so is there a way to flash the drive to make it work with my toshiba qosmio g30. or can i swap the chipsets on the optical drive by disassembling the casing and swapping them over. i just want the thing fixed. thanks please help!!!

Qosmio G30: Monitor Phosphors needed to configure Adobe Gamma

Similar Messages

Maybe you are looking for