Qosmio G50-12K - BIOS update for 8GB RAM support?

Hi
I just upgraded my Qosmio G50-12k to 8GB RAM and installed Windows 7 64bit ultimate. The Windows see 8GB RAM but can only use 4GB. I have BIOS version 2.0.0 I wanted to upgrade to version 2.10 "P0060v210.exe"
When I run the BIOS update i get this massage [Error] BIOS Update is not supported OS. Unsepported OS or service pack installed.
I am really clueless on what to do. Can Qosmio G50-12k BIOS be updated to support 8GB RAM?
please help !
thanks allot eliot

Hi eliotah,
In my opinion BIOS update is worth a try!
But I dont understand why you cant make this update. Have you installed Toshiba Value Added Package? In my opinion its necessary to start the BIOS update.

Similar Messages

Qosmio G50/402 - How to use 8GB RAM?

I have Qosmio G50/402 with 8GB RAM installed although the useable is only 4GB.
Is there any way to use the 8GB?

Hello
This can have different reasons.
Firstly you have to check if your notebook supports 8GB RAM. Check the specifications of your chipset but as far as I know Qosmio G50 should support 8GB RAM.
Furthermore it would be interesting to know what OS you have. To use full 8GB RAM you have to use a 64bit OS.
And what type of modules you are using exactly? In worst case the new module isnt compatible with your notebook. Normally the best option is using two identical modules from one manufacture, e. g. Kingston. I have very good experience with these RAM modules for notebooks so I can really recommend it.
Greets

K8t800 pro bios update for Athlon X2 support

Hi everyone please help. How do I flash my bios to an updated version for X2 support? My motherboard is http://www.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=588
K8T Neo2-F/ FIR
Thanks.

I tried creating a bootable cd rom, I wasted all of them. I'm using an a-data usb 4GB stick. Yes I prepared it with Hp-tool. I even tried to flash it with a floppy but I didn't know the commands for that- so that failed too lol.
I followed instructions on MSI forum usb flashing tool. When I boot with the usb nothing happens. Just a cursor on the top left side of monitor blinks.
I did manage to access the flash utility on the floppy but I didn't know how to use it.

What version of LR should I choose to run it on a 2008 macbook pro OS 10.5 (updated with 8GB RAM)

As it says in the title: I want to run LR on my 2008 macbook pro OS 10.5 (updated with 8GB RAM). Adobe support told me that it would not be a problem, yet i'm confronted with a com.apple.installer.pagecontroller error -1. I have no idea what it is or how to solve it.
Can you please help me? Thank you.

You will not be able to use a LR 5 key on an older LR. While an intermediate version of OS X may be easier on your system and may allow a newer version of LR than LR3, if it is not current you still have to get that old version of LR from an alternate channel.
If you have an easy way to clone your system I would try upgrade you Yosemite and putting LR 5 on it since you have a key. If it doesn't perform to your satisfaction you can always clone back to 10.5 and seek an alternate solution.
However, was the LR 5 key owned by your previous job along with that other laptop? If so, it violates the license for you to use it.

There are two BIOS Updates for Satellite A210 2.00-WIN & 2.30-WIN

In 2010 there are two BIOS Updates for Satellite A210 2.00-WIN & 2.30-WIN
In archive: http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp
They compatible for Satellite A210-1AO, Part Number: PSAELE-03Q009G3 (BIOS version/date TOSHIBA V2.0, 2008.06.10)?

1. When I press power button notebook and OS start as usual.
2. When I press power button and after I turn PC to BIOS mode, PC is crashing (shortly).
3. So, I checked using standard OS tools hard disks for errors (errors was on disk where OS and all software installed. All errors was fixed).
4. After I started using standard OS tools (Start from: BIOS->System start from CD-Rom with tools on CD) RAM memory test.
5. On stage Test All Memory PC crashed. (No any dumps/logs left in the system about crashing).
6. Now I need to do some physical manipulations. Ill have check each memory module. And I don't know how looking my motherboard, what is where on it. Where I can see scheme with details, names and elementary explanations (what is what)?
Im not sure, but motherboard should be IALAA..?

Support Assistant Suggests BIOS Update for HP ProDesk 401 G1 MT

HP Support Assistant notifies me of a BIOS update for my HP ProDesk 401 G1 MT computer running Win 7 Pro sp1.
Recommended update
HP Business Desktop System BIOS (L02)
HP Business Desktop System BIOS Package for models with an L02 BIOS
SoftPaq number SP71111 Version v02.40Ap1 Size 15.81MB
There is available disk space and the update downloads okay.
Then a new window opens titled hp BIOS Flash Update hp.
This BIOS Flash Update SoftPaq contains utilities and data files that can be used to restore or upgrade the system BIOS on Hewlett-Packard business desktops. Several methods for changing the BIOS firmware stored on your computer are provided as described below.
yadda, yadda, yadda
There are no instructions on what I am to do.
Then the installation fails.
This has happened several times now. I'm clueless. I don't even know how to check if I have an L02 BIOS. What am I supposed to be doing to update the BIOS as recommended by HP Support Assistant?

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Lenovo t410 BIOS update for win 8.1

hi
I want to upgrade my BIOS, but there is no update available for bios in windows 8.1.. My Bios version is 1.18, I want to update because i read somewhere that if your fan make noise make sure you have updated BIOS :A.. I want to know if I can install "BIOS update for win 8" in my lenovo t410 with windows 8.1..
thanks everyone for helping..
sorry any mistake in english, I am from Kosova <3
Solved!
Go to Solution.

Hello.
The Windows BIOS upgrade isn't OS specific, it runs on all OS's between XP-Win8.1, even if it doesn't list 8.1 specifically.
You can either update it manually, using the update here:
BIOS Update Utility for ThinkPad T410, T410i
Or make a bootable CD/USB with the ISO file here:
BIOS Update Bootable CD for ThinkPad T410, T410i
Either way works like a charm on a Windows 8.1 machine, but be aware of the risks involved in updating your BIOS.
Good luck!
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

Compaq Presario SR2129UK bios update for windows 8 pro 32bit

Hi all.
I have recently upgraded my operating system from Windows 7 pro to Windows 8 pro. I have alos changed the CPU to a pentium D, The power supply and the graphics card but I am having from with my SD ram and temperature displays.
I want to upgrade my bios if possible due to all the upgrades, when I looked in this site it doesn't mention windows 8 operating system with my PC? My system info is below.
Compaq Presario SR2129UK bios update for windows 8 pro 32bit.
Any help would be appreciated.

Hi:
The only BIOS update for your model is for Windows Vista (v5.23).
There aren't any newer BIOS releases than that one.
You would need to be running Windows Vista in order to update the BIOS, or you would run a better than 99% chance of completely wrecking your PC.

Bios updates for 845 Ultra?

Is anyone aware of any pending bios updates for this motherboard or has it been put out to pasture ? I'd still like to see a fix for the warm restart problem when overclocking in addition to the 1.65 core voltage limitation. Before anyone says that those won't be fixed - I can wish, can't I?

I have the 845 Ultra-ARU and I am running my 1.8A at 2.52 GHz with a voltage of 1.71 actual applied volts. This system is rock stable with a fsb of 140. I have done the VID-pin mod, however. I too would also like to see a BIOS update for a couple of reasons.
1) According to the temperatures being reported by PC Alert III, my BIOS, and MBM5, my CPU idles at 50 C and goes up to 67-68 C under a full Prime95 load. The reason why I think this is faulty is because I have run my computer with the side panel off, and there is no difference in the CPU or system temperature. Also, when running the Prime95 test, I've put my hand right on the heatsink and it is BARELY warm. The heatsink is making solid contact with the CPU, so if the CPU was actually at 68 degrees C, the heatsink too would be incredibly warm. My own hand tells me that it cannot be 152 degrees Fahrenheit.
2) THE MEMORY RATIOS ARE GARBAGE!!!!! I've got a 2.52 GHz CPU that is suffering a bottleneck from the measly 2.0 GB/s that my RAM is able to feed it. Every other motherboard I've ever seen gives you the options of a couple different memory ratios. I would at least like the option to run my memory at a different speed than my fsb. Perhaps a 3:4 ratio could be done? Just something so that I can try and get a little more bandwidth out of my RAM. I know that the board is only designed to support PC1600 and PC2100 DDR RAM, but how could it hurt to give the option to support PC2400 or PC2700, maybe even PC3200 DDR RAM? Plenty of other 845 chipset based boards can do that. (Not officially, but through a variety of memory ratios.) I'm just tired of not being able to do anything with my memory.

Bios update for H-RS880-uATX

Hello everyone,
I recently posted a question about whether or not I could install the Phenom II X6 1100T on my e9240f system which happens to have the H-RS880-uATX with a rated TDP of 125 watts, same as the Pheno 1100t. And even though this processor is not listed as one of my choices in my product specifications page I went ahead and bought since I read different thread where they mentioned that HP had forgotten to update the pages therefore the processor I wanted wasn't listed, and also the fact that this other model has the same exact same motherboard as mine and the Phenom 1100th is in fact listed in its product specification page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844678&tmp_task=prodinfoCategory&cc=jp&dlc=en...
That was one of my main motivation as to why I bought it. To make story short, I got the processor and installed it in my system and it did work, however, not as I expected. I was only able to get 787mhz per core and the model number wasn't displayed on my system propeties, it just said "unknown phenom processor". But here's the deal, I believe the processor I receieved was overclocked at some point in its life because on the TDP it read 129 watts which why I believe it wan't 100% compatible. Had it been 125 watts or less I'm sure it would have been. And I noticed that because my current processor is rated at 95watts, but in bios or other sofware I use to see how much enery is drawing, it's rated at 93.60watts. So I'm pretty sure that 129 watt had something to do with that, but that's just my guess.
In the mean time, is there a bios update for my system that would allow me to run the 1100t processor in case I'm wrong with my assumption, or are there any drivers for my AM3 socket?
Thanks in advance!

Hi,
I noticed that there is a contradiction with the HP motherboard specifications and the product specifications for the HPE h8-1060jp. Did you notice that discrepancy?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Where can I find a BIOS update for Satellite A100-200 (PSAA8E)

Hello,
Where can I find a BIOS update for this model?
The BIOS on the download page is November last year, is there anything newer or does anyone know of an update that is compatible?
Thanks,
Ian

Yep, newest updates and drivers for your notebook you will find on the Toshiba download pages, as Jimi already mentioned.
Just as a little hint from my side is, that if there is nothing wrong with your notebook, just leave it as it is.
As there is the saying, never touch a running system.
So keep that in mind. ;)

Where can I find a BIOS update for Satellite A200-14D (PSAEC)

Hello,
Where can I find a BIOS update for this model?
My bios is 23/10/07 Windows Vista 32 Bit 1.80-WIN

Hi
Did you check the Toshiba European driver page?
There you could find all drivers and BIOS for the Satellite A200-14D (PSAEC)
But I checked the page and the BIOS 1.8 for Win Vista 32bit is still the newest one.
Seems you are already up to date buddy ;)

Cannot download BIOS Update for Tecra M5

I'm trying to download the latet BIOS update for the Tecra M5.
When I click on the download link, I get redirected to another server.
My login does not appear to work for this server - is there another location I can download the file from?
Thanks.

Hi,
When I try to download the bios (Tecra M5, 3.60 Win) I get another link:
http://support.toshiba-tro.de/tedd-files2/0/bios-20071206111654.zip

Bug in latest 2 bios updates for FM2-A55M-E33

Hey guys,
Today I tried to update my bios of my FM2-A55M-E33 to the latest version(7721vA4.zip). Once everything completed succesfully, the bios wouldn't boot anymore.
I plugged out my 3TB hdd and it worked fine. I installed an earlier version of the bios(7721vA0.zip) and this did work with my 3TB hdd.
So in short:
The latest bios updates for FM2-A55M-E33 will freeze(black screen) at bios start when a 2TB+ hdd drive is plugged in.
Namely:
FM2-A55M-E33 (MS-7) V10.3 BIOS Release
FM2-A55M-E33 (MS-7) V10.4 BIOS Release
I hope you can fix this asap, especially since these are the latest updates.
Regards,
Henkie de Grote

Quote from: flobelix on 24-February-13, 08:05:55
better report to MSI: >>How to contact MSI.<<
True, but I couldn't find an email address, couldnt see how to contact them through a form or something, and don't really want to call them if otherwise possible.
Thx for the info anyways

Where can i find Bios Update for K450e

Hi can anyone direct me where i can find the BIOS update for a K450e thanks.... a link would be great....

There is no bios update for the k450e on there driver page
The only time there will be is to fix a conflict between hardware
are you having a problem with your k450e
Thx dave
yoga 2, lenovo b540
3 custom gaming pc systems

Qosmio G50-12K - BIOS update for 8GB RAM support?

Similar Messages

Maybe you are looking for