Qosmio G50-12Q: How to disassemble keyboard key?

Where I can find of the relative photos to the disassembling of the keys of the keyboard of Qosmio g50 ?

Is possible to remove the single keys and in some sites in it Usa and France I have been able to see that they sell also the single keys of several models of PC
I have since there are photo in Internet on like taking apart the qosmio g50 but in particular of the keys of the keyboard I have not found no type of photo

Similar Messages

  • Qosmio G50-12q - How to setup devices connected to USB in standby

    Good Morning
    I wanted to use the function of stand by of the PC.
    I wanted also that the peripheral ones were extinguished once in stand by.
    Once set up this function the PC goes regularly in stand by but the peripheral ones connected through usb remain ignited, additional masterize type, a peripheral one usb wi.fi, etc
    Someone has said to me that perhaps some functions in the Bios are not set up in order to make that once entered in stand by the PC extinguish also all the peripheral ones connected.
    Which verifications and configuration I must carry out in the bios of the PC?
    How us within in the bios? Pressing which keys?
    Thanks for

    *@ valkyrie*
    Please post some feedback if the workaround posted by Akuma helped!
    This would be really appreciated.

  • How to enter BIOS on Qosmio G50-12Q?

    Good Morning
    I have a PC Qosmio G50-12Q - OS is Window Vista 32 bit
    How I make to enter in the BIOS of the system ?
    Which are the keys to press ?
    Tank you

    Hello
    I asked a friend of me because he has Qosmio G50 and you have to press F2 key to enter BIOS setup.
    By the way: If you press F12 you can select the boot device. Therefore its not necessary to enter the BIOS. :)

  • Qosmio G50-12q - Vista does not load after connecting external USB keyboard

    I have acquired a keyboard enermax acrilux usb and have connected the taken keyboard to the qosmio g50 12q at the same one where an other keyboard was attacked usb and that it worked without problems.
    After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista ultimate and the inner impellers have been activated.
    Never happened previously. I have doubted of the enermax
    Reconnected to taken usb the mail of the qosmio it has on the back not given to problems of start of impellers
    As the enermax it never has blocked the start of the system operating and put in function the impellers also having connected it to the same one taken usb to which precedence was connected one keyboard ?
    Tank you

    Hi mate
    Sorry but you message I really hard to understand
    What I understand is that you connected an external keyboard to the Qosmio and now the notebook does not boot up correctly. Is it right?
    What to say; maybe you should disable the USB legacy mode in BIOS.
    Please check this!
    To get into the BIOS press F2 and while powering up the notebook.

  • Hibernation mode on Qosmio G50-12Q

    Good Morning
    In the Qosmio G50 - 12Q, after to have selected " Put in Hibernation " in order to make that it enters in function it is necessary to press key OFF of the pc ?
    Because selecting simply " Put in Hibernation " the current - feeding not come removed
    Tank you

    Hi valkyrie,
    I didnt understand your question but you can use hibernation mode when you press FN+F4 key combination or choose hibernation from Windows start menu.
    After this the computer will automatically go to hibernation mode and then you can close the lid if you want.
    If you close the lid, the notebook will start when you open the lid or you press power button. ;)

  • Qosmio G50-12Q: Recording TV programs to DVD video using Win Media Centre

    Good Morning
    I have a Qosmio G50-12Q that it introduces this problem:
    When I want to masterize or burn a program recorded of the terrestrial TV with the Qosmio on DVD - video it come outside this message MEDIA CENTER EXTENSIBILITY HOST HAS STOPPED TO WORK " and the Media Center program comes closed .
    If the program TV the registry choosing whit option " DVD dates " records given it normally but it does not come read from other player DVD, because is not recorded in the format video
    While if the masterize choosing option DVD video comes the error message over saying.
    Does this happen to someone else?
    What could be the problem?
    Thank you for your reply.

    Someone knows to say reading in the detail the error list to me please what e' opportune to make
    Media Center Extensibility Host
    Problem
    Stopped working
    Firma del problema
    Nome evento problema CLR20r3
    Firma problema 01 : ehexthost.exe
    Firma problema 02 : 6.0.6002.18005
    Firma problema 03 : 49e01113
    Firma problema 04 : SonicMCEBurnEngine
    Firma problema 05 : 6.0.6000.0
    Firma problema 06 : 4549bdd6
    Firma problema 07 : 3d
    Firma problema 08 : a9
    Firma problema 09 : System.InvalidCastException
    Versione SO : 6.0.6002.2.2.0.256.1
    ID Impostazioni Locali : 1040
    Ulteriori Informazioni sul Problema
    ID bucket : 580277127

  • Qosmio G50-12Q - Screen saver doesnt work if I use wireless mouse

    I have a Toshiba Qosmio G50-12Q
    If you use a wireless mouse does not work the screen saver.
    If I disable the mouse instead of the screen saver runs regularly.
    There is some way to run the screen saver also using a wireless mouse?
    Tank you

    > The screen saver is one program downloaded from internet.
    Well, in such case it can be a software bug too.
    To be honest I dont see any connection to Toshiba here it seems to be an 3rd party software which does not start up when WLan mouse in connected maybe the screen saver developer could provide more details here

  • Qosmio G50-12Q: No audio while moving video files from camcorder

    Good Morning
    I have a portable PC Toshiba Qosmio G50-12Q with 640GB of HDD and 4GB Ram equipped with seen the Window system Completed modernized to service version pack 2
    I connected the video camera Sony PC 115 to the PC through the I.Link IEEE 1394 cable while that I am importing a determined video to the Window Movie Maker in order to record it.
    At this moment in which it comes reproduced in the screen of Movie Maker I see the reproduced video from the video camera but do not feel the audio. When then I have ended to import the video I go and it always see again in Movie Maker, the program regularly reproduces or the video that it has recorded or the audio that exactly I did not feel it was importing while it.
    It' is to regular ?
    Task that in phase of import I would have to feel and to see or that video audio. Not task that is the defective cable because when I see the recording of the video in Movie Maker I feel also the audio base, wants to say that the audio has exited from the video camera, entered in the PC through taken I.Link has recorded that it.
    To the aim i can hear the audio in phase of transfer / import from video camera or any other audio apparatus / video I must for case to modify inside of Window Movie Maker or in Seen Window some formulation detail that it regards also the taken I.Link specifically ?
    Or the cable goes connected between video camera and PC with details sagacities? Even if me it seems to have connected well it perche' as I repeat l' audio comes recorded.
    Thanks and salutes

    I have Sony camcorder DCR-TRV520E to and in the past I have recorded several movies on my notebook.
    I have used Ulead Movie studio application and everything was OK.
    10 minutes ago I tested it with Windows Movie Maker (Vista) too. Here some facts:
    - My Sony cam was recognized properly
    - Started Windows Movie Maker and chosen option IMPORT > From digital video camera
    - Browsed into right folder
    - On next step from alone application started rewinding videotape
    - Importing video started from alone and when finished I checked it and sound was there.
    Later I chosen option "Publish to" > This computer and after 20 minutes everything was finished.
    I use simply firewire cable. Nothing special.
    I really don't understand what is wrong there.
    Is this first time you do this?

  • Qosmio G50-12Q - Integrated recorder issue

    Good Morning
    I have Toshiba Qosmio G50-12Q, with Window Vista Ultimate 32 bit with integrated masterizze Teac. Every time that I try to masterize a cd or dvd the system says to me that does not find the masterizze.
    In management dispositive it perfectly turns out installed and that it works correctly. Which could is the cause of this continuous not acknowledgment of the masterizze ?
    Every time I must reestart the system newly
    Thank you for your reply

    Hi
    I dont understand you too
    Please post clearly what problems you have with the Qosmio G50 notebook.
    I read something about CD/DVD drive (Teac) and masterizze what do you mean by masterizze?
    Secondly; as far as I know this Qosmio notebook was equipped with Panasonic (UJ-841) DVD-SUPER-MULTI (+-R DL) drive I didnt find any info about Teac

  • C#: How to convert Keyboard.key (Unicode char as number) into correct char?

    Our application uses barcode scanner.
    when scanning a barcode and convert Keyboard.key (as ushort with value 16, it represents char ':') by using
    1)(char)(Keyboard.key)
    2) or Convert.ToChar(Keyboard.key),
    both way convert into symbol '+'.
    How to convert into ':'?
    What is a correct way to convert Keyboard.key as ushort into correct char? Thx!
    JaneC

    Hi Dan Nemec,
    It is normal '+'. It is special '+' symbol.
    We search a little bit and find out Unicode ':' is 3A and value is not 16.
    So during the process barcode scanner, the value has been changed in some way.
    We are trying to find out where the value has been changed.
    JaneC

  • Qosmio G50-136 - How to enable Hardware virtualisation

    Hi,
    I have a Qosmio G50-136 with an Intel Core 2 Duo P8600 that is said to be YES to intel virtualization technology (VT-x) by intel itself ( [intel|http://ark.intel.com/products/35568/Intel-Core2-Duo-Processor-P8600-3M-Cache-2_40-GHz-1066-MHz-FSB] ).
    My issue is that none of the bios settings available through HWSetup refer to hardware virtualization,
    So is there a way to enable it ? I'd like to run mac os x 64 bits in vmware workstation.

    > My issue is that none of the bios settings available through HWSetup refer to hardware virtualization,
    .and did you check the BIOS settings?
    From my knowledge the VT can be enabled and disabled only in BIOS.
    If such settings is missing or not supported, you will not be able to enable/disable VT

  • Qosmio G50/402 - How to use 8GB RAM?

    I have Qosmio G50/402 with 8GB RAM installed although the useable is only 4GB.
    Is there any way to use the 8GB?

    Hello
    This can have different reasons.
    Firstly you have to check if your notebook supports 8GB RAM. Check the specifications of your chipset but as far as I know Qosmio G50 should support 8GB RAM.
    Furthermore it would be interesting to know what OS you have. To use full 8GB RAM you have to use a 64bit OS.
    And what type of modules you are using exactly? In worst case the new module isnt compatible with your notebook. Normally the best option is using two identical modules from one manufacture, e. g. Kingston. I have very good experience with these RAM modules for notebooks so I can really recommend it.
    Greets

  • Qosmio G50-115: How to upgrade Home Premium to Ultimate

    Dear Friends,
    I am a teacher in a local college. We decided to buy Qosmio (Device name: G50-115, , Device number: PQG55E-01J00GEN, Product Group: QOSMIO) for our department. We bought two for the time being for trial. But now my job is on the sword.
    These laptops are pre-intstalled with Vista-Home Premium -SP1 and we need to upgrade these to Vista Ultimate. We have a Windows Vista Ultimate DVD but that is without SP1 on it. When I run and try to upgrade it rejects the upgrade as the installed version is newer than the version which I have. Microsoft is of no help, they said you bought it....
    Microsoft advised me to uninstall SP1 but I cannot do that because there is no option in ControlPanel for this.
    If I do clean install I will lose all the Toshiba's nice software. I made a recovery disk but do not think that I will be able to install these software. Though I can download all the necessary drivers but I am interested in factory installed utilities/software.
    Would you please advise me what to do. Is there we can get all teh Qosmio software on a DVD for instalation.
    Regards,
    Dr. Sayied

    Hi
    As Raver said use vLite free software. This software would allows you to create a new Vista Ultimate DVD and you could include the SP1 which you could download from the Microsoft.
    At the other hand you could also use the Vista Ultimate DVD to install the Vista on the Qosmio G50.
    The Toshiba tools and Vista driver can be downloaded from the Toshiba Europe driver page.
    After the Vista Ultimate installation you could update and install the SP1

  • Portege R700 - how to clean keyboard keys?

    Hi
    I have a Toshiba Portege R700 - and I have spilt some coke onto a small section of the keyboard.
    Unsurprisingly, two or three keys are now "sticky".
    Is this as simple as getting access to the keyboard and cleaning the relevant keys?
    Or is it not as simple as that?
    If I can do this, is there a pictorial guide on how to access the keyboard?
    I am loathe to open it without a look at the tech manual first.
    Thanks

    Hello
    In my opinion you will not be able to clean it properly. Coke is full of sugar. It can be complicated but you can try it.
    In worst case you must exchange he keyboard.
    So what you must do is to remove key cap for each critical button. It is fixed with small plastic holders. Just take something like credit card but more stabile, put under the key cap and try to remove it. Under the key cap is small key mechanism. Try to clean it up with wet cloth. Be very careful and clean it without much pressure.
    When you think it is OK place the key cap in the place and press it down, very gently of course.
    You will hear click noise and the key cp should be in place again.
    I hope you will be able to get it work again.
    Please post some feedback.

  • E71: how to remap keyboard keys

    Hi!
    I was wondering whether there is a way to remap the keys on the qwerty keyboard on E71. I basically want a different layout. Is there any system utility I could use, buy, etc.?
    The reason I want this is because a standard native Russian keyboard ("jetsukeng" as it is called) is something I am not used to. I prefer a phonetic keyboard sometimes called "yawerty", so I'd like to use it on E71.
    Thanks in advance,

    Maybe something like Magic Key? http://bit.ly/grQHq
    My experience with Magic Key has been pretty good, on my E71, although I'm not remapping a whole lot of keys. I remap a few keys, so they function differently, depending on which application is active.

Maybe you are looking for