Qosmio G50-12Q: Recording TV programs to DVD video using Win Media Centre

Good Morning
I have a Qosmio G50-12Q that it introduces this problem:
When I want to masterize or burn a program recorded of the terrestrial TV with the Qosmio on DVD - video it come outside this message MEDIA CENTER EXTENSIBILITY HOST HAS STOPPED TO WORK " and the Media Center program comes closed .
If the program TV the registry choosing whit option " DVD dates " records given it normally but it does not come read from other player DVD, because is not recorded in the format video
While if the masterize choosing option DVD video comes the error message over saying.
Does this happen to someone else?
What could be the problem?
Thank you for your reply.

Someone knows to say reading in the detail the error list to me please what e' opportune to make
Media Center Extensibility Host
Problem
Stopped working
Firma del problema
Nome evento problema CLR20r3
Firma problema 01 : ehexthost.exe
Firma problema 02 : 6.0.6002.18005
Firma problema 03 : 49e01113
Firma problema 04 : SonicMCEBurnEngine
Firma problema 05 : 6.0.6000.0
Firma problema 06 : 4549bdd6
Firma problema 07 : 3d
Firma problema 08 : a9
Firma problema 09 : System.InvalidCastException
Versione SO : 6.0.6002.2.2.0.256.1
ID Impostazioni Locali : 1040
Ulteriori Informazioni sul Problema
ID bucket : 580277127

Similar Messages

Qosmio G50-12Q - Screen saver doesnt work if I use wireless mouse

I have a Toshiba Qosmio G50-12Q
If you use a wireless mouse does not work the screen saver.
If I disable the mouse instead of the screen saver runs regularly.
There is some way to run the screen saver also using a wireless mouse?
Tank you

> The screen saver is one program downloaded from internet.
Well, in such case it can be a software bug too.
To be honest I dont see any connection to Toshiba here it seems to be an 3rd party software which does not start up when WLan mouse in connected maybe the screen saver developer could provide more details here

Qosmio G50-12Q - Integrated recorder issue

Good Morning
I have Toshiba Qosmio G50-12Q, with Window Vista Ultimate 32 bit with integrated masterizze Teac. Every time that I try to masterize a cd or dvd the system says to me that does not find the masterizze.
In management dispositive it perfectly turns out installed and that it works correctly. Which could is the cause of this continuous not acknowledgment of the masterizze ?
Every time I must reestart the system newly
Thank you for your reply

Hi
I dont understand you too
Please post clearly what problems you have with the Qosmio G50 notebook.
I read something about CD/DVD drive (Teac) and masterizze what do you mean by masterizze?
Secondly; as far as I know this Qosmio notebook was equipped with Panasonic (UJ-841) DVD-SUPER-MULTI (+-R DL) drive I didnt find any info about Teac

Qosmio G50-12Q: No audio while moving video files from camcorder

Good Morning
I have a portable PC Toshiba Qosmio G50-12Q with 640GB of HDD and 4GB Ram equipped with seen the Window system Completed modernized to service version pack 2
I connected the video camera Sony PC 115 to the PC through the I.Link IEEE 1394 cable while that I am importing a determined video to the Window Movie Maker in order to record it.
At this moment in which it comes reproduced in the screen of Movie Maker I see the reproduced video from the video camera but do not feel the audio. When then I have ended to import the video I go and it always see again in Movie Maker, the program regularly reproduces or the video that it has recorded or the audio that exactly I did not feel it was importing while it.
It' is to regular ?
Task that in phase of import I would have to feel and to see or that video audio. Not task that is the defective cable because when I see the recording of the video in Movie Maker I feel also the audio base, wants to say that the audio has exited from the video camera, entered in the PC through taken I.Link has recorded that it.
To the aim i can hear the audio in phase of transfer / import from video camera or any other audio apparatus / video I must for case to modify inside of Window Movie Maker or in Seen Window some formulation detail that it regards also the taken I.Link specifically ?
Or the cable goes connected between video camera and PC with details sagacities? Even if me it seems to have connected well it perche' as I repeat l' audio comes recorded.
Thanks and salutes

I have Sony camcorder DCR-TRV520E to and in the past I have recorded several movies on my notebook.
I have used Ulead Movie studio application and everything was OK.
10 minutes ago I tested it with Windows Movie Maker (Vista) too. Here some facts:
- My Sony cam was recognized properly
- Started Windows Movie Maker and chosen option IMPORT > From digital video camera
- Browsed into right folder
- On next step from alone application started rewinding videotape
- Importing video started from alone and when finished I checked it and sound was there.
Later I chosen option "Publish to" > This computer and after 20 minutes everything was finished.
I use simply firewire cable. Nothing special.
I really don't understand what is wrong there.
Is this first time you do this?

How to enter BIOS on Qosmio G50-12Q?

Good Morning
I have a PC Qosmio G50-12Q - OS is Window Vista 32 bit
How I make to enter in the BIOS of the system ?
Which are the keys to press ?
Tank you

Hello
I asked a friend of me because he has Qosmio G50 and you have to press F2 key to enter BIOS setup.
By the way: If you press F12 you can select the boot device. Therefore its not necessary to enter the BIOS. :)

Hibernation mode on Qosmio G50-12Q

Good Morning
In the Qosmio G50 - 12Q, after to have selected " Put in Hibernation " in order to make that it enters in function it is necessary to press key OFF of the pc ?
Because selecting simply " Put in Hibernation " the current - feeding not come removed
Tank you

Hi valkyrie,
I didnt understand your question but you can use hibernation mode when you press FN+F4 key combination or choose hibernation from Windows start menu.
After this the computer will automatically go to hibernation mode and then you can close the lid if you want.
If you close the lid, the notebook will start when you open the lid or you press power button. ;)

Qosmio G50-12q - Vista does not load after connecting external USB keyboard

I have acquired a keyboard enermax acrilux usb and have connected the taken keyboard to the qosmio g50 12q at the same one where an other keyboard was attacked usb and that it worked without problems.
After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista ultimate and the inner impellers have been activated.
Never happened previously. I have doubted of the enermax
Reconnected to taken usb the mail of the qosmio it has on the back not given to problems of start of impellers
As the enermax it never has blocked the start of the system operating and put in function the impellers also having connected it to the same one taken usb to which precedence was connected one keyboard ?
Tank you

Hi mate
Sorry but you message I really hard to understand
What I understand is that you connected an external keyboard to the Qosmio and now the notebook does not boot up correctly. Is it right?
What to say; maybe you should disable the USB legacy mode in BIOS.
Please check this!
To get into the BIOS press F2 and while powering up the notebook.

Qosmio G50-12Q: How to disassemble keyboard key?

Where I can find of the relative photos to the disassembling of the keys of the keyboard of Qosmio g50 ?

Is possible to remove the single keys and in some sites in it Usa and France I have been able to see that they sell also the single keys of several models of PC
I have since there are photo in Internet on like taking apart the qosmio g50 but in particular of the keys of the keyboard I have not found no type of photo

How to Optimize Quality of DVD Video using Premier 6.5

I am looking for some advice how to get the best video quality on the MPEG-2 DVDs I create. I capture my MiniDV video into Adobe Premiere 6.5 in AVI format using a D-Link (at least 2 years old) 1394 fireware card. I set my default projects settings to Microsoft DV Compressor, Frame Size 720 x 480, 16x9 aspect, 29.97 fps, depth millions, quality 100%. Once my editing is done, I export using Adobe Premier 6.5 MPEG encoding (I have the latest 1.3 update). I typically pick the DVD 16x9 High Bit Rate setting. My DVDs look OK. The Canon ZR30 MC MiniDV Camcorder I have been using recently died; it was about 5 years old. I just replaced it with a 3CCD MiniDV camcorder from Panasonic (PV-GS320) that should help in terms of the source video quality. I am not ready for HD. Too expensive to upgrade my PC and disk subsystem in particular and my preference will be an HD camcorder with no spinning hard drive or moving tapes. We are very close to this. I imagine many folks are in my boat in this in-between stage where we get to watch HD on our LCD TVs but must work in the stone ages with our DVD video editing software and equipment. I would appreciate any suggestions how to get better performance either by upgrading to newer software from Adobe (provided this will really help), buying a better capture card, changing my settings in Premier. Any suggestions would be much appreciated.

>typically pick the DVD 16x9 High Bit Rate setting
I will qualify this by saying that I (used to) use Premiere 6.02 and the MPEG output added by a Pinnacle Dv500 card's software, so I don't have any direct experience with Premiere 6.5 and the MainConcept coding engine
But, I am
switching over to Premiere Pro
which also uses MainConcept, so I have some experience with settings
For a video up to one hour, your current settings are probably the best you can do
For over one hour, you should look at 2-pass VBR settings
In Pro, there is a place to adjust the 3 individual components, and I used a MINimum bitrate of 3 and MAXimum bitrate of 7 (see below) and would then play with the TARGET bitrate to have the highest setting where the software would say there was enough space (on a DVD) to export the project
That "play with" consisted of adjusting the target bitrate a tenth at a time (6.5 6.4 6.3 etc) until the status message would change from insufficient space to READY... at which point I knew I had the best quality the software could give
If you want to try a different product, visit Vendor site CCE Basic
MPEG coding program
Download site for
CCE Basic Demo or Purchase
And, some general information about burning DVD's
To
Burn Error Proof DVDs (Well, close to error proof!)
Use the SLOWEST possible burn option your burner will allow in Encore, since it is much better to take a bit more time burning the disc than it is to burn "fast" and have a disc that won't play
Set the VIDEO portion of the transcoding options to a Maximum of 7,000 so your burned disc will have a better chance at playing in desktop players (which support burned discs, if at all, only as an "after thought" of the DVD specification)
Use AC3 or PCM audio transcode settings for best player compatibility (some discussion of MPEG audio not being supported by all players, especially for NTSC discs)
Buy and use Taiyo Yuden (or Verbatim?) brand blank discs
Read this
ENTIRE message
Concerning Replication
And this one
About Authoring and Playing a DVD
Discussion of
Peak Bitrate
Here is one
Bit Budget Calculator

Playing DVD's using Windows Media Player

I've been trying to play dvd's that I've made or bought in both my Dell Inspiron labtop and my Dell 8250 pc and they won't play right. It doesn't matter if it's a music or movie. I downloaded a nvidia video decoder for my pc.......no go! The only thing that seems to work better than anything that I've tried is to download the VLC media player. The play there isn't bad, but I was told by the geek squad that I may need some more memory? All my drivers on both computers are up to date so what gives. If I try to play any dvd in media player without the vlc the audio/video is jumpy and distorted. I've been therefore using the vlc...........it was FREE! I've read in a thread that "changing the region" will then auto play when dvd's are inserted. Thanks for all your help!!!!

It sounds like a codec issue with media player. Media player doesn't come with it's own DVD codec, which is needed to play DVD's. You need third party DVD software or codec to play DVD's, like WinDVD, PowerDVD,VLC (free), etc. When DVD codec is installed, Media player will use this to decode the DVD files.
3rd party software usually has a built in utility that loads at start-up and can be configured to auto play DVD's, or........you can use windows auto play feature to automatically plays DVD's when inserted.
Open "My Computer".> Right click you DVD drive> select "properties"> under "Auto Play" tab, select DVD movies, then check "select an action to perform", Highlight the program you want to play you DVD movies, then click ok.
Message Edited by inutel on 01-23-2009 08:57 PM

MAC HANGS WHEN I WRITE DVD VIDEO USING TOAST OR IDVD

DEAR SIR,
I HAVE A PROBLEM WITH MY SONY DVD .. EVERY TIME I TRY TO WRITE DVD VIDEO MY MAC HANGS WHEN TOAST ROXIO 10 STARTS TO LEAD OUT AFTER ENCODING THE VIDEO .. AND IT HANGS ALSO WITH IDVD AFTER ENCODING THE VIDEO .. AND I MUST RESTART MY MAC ...PLEASE TELL ME HOW TO FIX IT ??
Model: SONY DVD RW DRU-835A
Revision: SS02
Removable Media: Yes
Detachable Drive: No
BSD Name: disk2
Protocol: ATAPI
Unit Number: 1
Socket Type: Internal
Low Power Polling: No
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
THANK YOU FOR YOUR TIME
TAHA TALAAT
[email protected]

This is a user forum.
Caps is considered yelling, inappropriate, a left over from DOS, too. Oh, and it actually is HARDer to read.

Qosmio G50-12q - How to setup devices connected to USB in standby

Good Morning
I wanted to use the function of stand by of the PC.
I wanted also that the peripheral ones were extinguished once in stand by.
Once set up this function the PC goes regularly in stand by but the peripheral ones connected through usb remain ignited, additional masterize type, a peripheral one usb wi.fi, etc
Someone has said to me that perhaps some functions in the Bios are not set up in order to make that once entered in stand by the PC extinguish also all the peripheral ones connected.
Which verifications and configuration I must carry out in the bios of the PC?
How us within in the bios? Pressing which keys?
Thanks for

*@ valkyrie*
Please post some feedback if the workaround posted by Akuma helped!
This would be really appreciated.

Qosmio G50-12Q - AC IN LED will flash orange

The PC and 'connected via the power supply current and when I turn the pc off by the button on the LED starts flashing orange on the PC AC IN. I state that the PC and 'turned off for a week and there are no problems of overheating. Although the detachment from PC Power Supply LED continues to blink orange.
I tried to remove the battery and reinsert it. Uil LED has stopped flashing and pressing the button on the PC is off and on again but 'every time I have to remove and replace the battery for por ensure that the PC comes on a regular basis by the on off button.
From what can 'depend. a battery problem because if I remove and reinsert stops blinking and lights up again?

Usually the DC-IN led does not blink if everything is OK.
If the DC-IN start flashing orenage then this indicates a problem with the power supply.
You should initially try to plugging the AC adaptor into another power outlet to check if the same would appear. If it still does not operate properly, then you should contact your reseller or the Toshiba ASP.
PS: if the power indicator flashes orange then this means that the notebook is in sleep mode

X-FI record audio from internal dvd video prob

I have an X-FI Platinum.
When I try to record audio from the internal dvd dri've when playing a video, the recording skips and changes speed, anyone else noticed thi ?. It's the same whether trying to record from the audio console or another application.
This is in audio creation mode
thanks
Eric

Go to this thread and follow the instructions to get the drivers/install disc for your pci soundcard:
http://forums.creative.com/creativel...hread.id=25677
Good luck!?

Best Program for DVD/Video converting

What is the best program for converting DVDs and videos? I know one is videora or something like that. I want something that is easy to use and dosen't take up alot of time to install.

GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
Patrick

Qosmio G50-12Q: Recording TV programs to DVD video using Win Media Centre

Similar Messages

Maybe you are looking for