Qosmio G50-12q - Vista does not load after connecting external USB keyboard

I have acquired a keyboard enermax acrilux usb and have connected the taken keyboard to the qosmio g50 12q at the same one where an other keyboard was attacked usb and that it worked without problems.
After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista ultimate and the inner impellers have been activated.
Never happened previously. I have doubted of the enermax
Reconnected to taken usb the mail of the qosmio it has on the back not given to problems of start of impellers
As the enermax it never has blocked the start of the system operating and put in function the impellers also having connected it to the same one taken usb to which precedence was connected one keyboard ?
Tank you

Hi mate
Sorry but you message I really hard to understand
What I understand is that you connected an external keyboard to the Qosmio and now the notebook does not boot up correctly. Is it right?
What to say; maybe you should disable the USB legacy mode in BIOS.
Please check this!
To get into the BIOS press F2 and while powering up the notebook.

Similar Messages

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

The webpage does not load after pressing enter or CTRL+ENTER. My OS is Windows 7 Ultimate

I have tried installing the older version Firefox 3.6. After entering the URL on address bar it does not load after pressing enter or CTRL+ENTER

This issue can be caused by an extension (AVG Safe Search can cause this) that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

10.2.8 Finder does not load after getting into OS X

I am pretty sure this happened to a lot of people, as I have read many many messages on this issue.
My computer is a Powerbook 867 with 128built in DDR and 512 added.
40Gb internal HDD and a 40GB firewire 3G ipod (the old 3G).
Here's the problem:
Last night just when I finishsed watching some divx on VLC running on 10.2.8, I quitted VLC using apple+Q, then closed the finder window i opened with apple+W. They both closed, but then the finder just did not respond (or have quitted). There isn't a little triangle below my finder icon on the dock. Everything else on the dock works perfectly fine. Desktop icons have disappeared.
Now I have restarted, nothing helps; went on apple discussion and found some "HELPFUL" solutions - deleting the finder preferences. First how was I suppose to delete it? ok... I installed a 10.2.3 on my ipod and boot it through there, also did a repair permission on my internal HDD. Finally deleted the com.apple.finder.plist.. So I booted up using my internal again. But still... finder DOES NOT LOAD after I got into my OS X.
Please if anyone can give me a solution to this problem!
P.S. the finder on my ipod is working fine. AND I do not want to reinstall OS X on my interal because I only did it last week after it went to service after a HDD fail (it has been replaced).
Powerbook 867Mhz 128+512MbDDR Mac OS X (10.2.x) 10.2.8

Check System Preferences - Accounts
Choose you account - login items: If iTunesHelper
shows up - remove it it will prevent re-installation.
It did not have iTunes in the list, just mail and iCal alarm. Deadlines and emails are vital in my home office.
Now that I think about it, adding Mail to the list was the only thing that I had changed to the computer when this happened, but I can't imagine how that would alter permission to install on the OS.
Eric
Note: I saw a G5 1.2 for $1,500 CAN. I was tempted.

ITunes does not load when connecting iPod Nano (4th Gen)

I have my iTunes settings 'disable automatic syncing for iphones and ipods' unchecked, and in my iPod settings i have 'open iTunes when connected' option checked, and iTunes still does not load. How do I solve this?

If you have itunes open and then connect the nano, what happens?

Hierarchy Viewer does not load after clicking on the + icon

Premise: I have a hierarchy viewer with multiple levels of master-detail with different VOs.
The inputs to the taskflow containing this page are the key and VO type. The tree should render until that VO which matches the type and key and all the next level children under it. The user can expand the nodes under these children at will to drill further.
Issue: I am able to render the tree with results. When I click on the + icon to drill on the children, I see that the backend code for fetching the children is called. But, the tree does not display. It shows the loading icon forever.
Example:
Organization - PO - POItem - Vendor - VendorSite -VendorAddress
                                                       - Responsible - ContactDetails
                    - Project - SubProject - Location
TaskFlow Input: Vendor, 12345
The tree should dispaly Organization - PO - POItem - Vendor(12345) - VendorSite(for 12345)
                                                                                                    -Responsible(for 12345)
If the user expands any of the VendorSites, the VendorAddresses should be shown
Technical Details: JDeveloper Version: 11.1.2.1.0
Code: To filter the children, I am overriding the CreateViewLinkAccessorRS in the VOImpls. I am passing bind variables to the VO criterion to check the paths.

@Arunkumar: Yes, I ran the AM tester and I am able to see the results properly for all the VOs and levels.
I created a sample on the HR Schema and tested. I see that when I click on the Employee node for expansion(can be checked with the data or the short description), it hangs with the load icon.
I do not see anything in the log other than:
<RegionRenderer> <encodeAll> The region component with id: r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
I do not see any upload options here to give my testcase. So, I uploaded to this link: https://www.dropbox.com/s/vybip3owzuziz86/HRHierarchyViewer.zip
Please let me know if I can do this elsewhere for easy access.
Message was edited by: Divya Bellamkonda

Hp software interface does not load after installing printer 6500A plus

I own a 6500A plus printer that is connected via wifi to my windows 8.1 laptop. At certain point in time the desktop icon stopped functioning, i.e double cliking it does not do anything. The same happens if i do that through start->programs->hp...
more info:
1. running HP Officejet 6500 E710n-z.exe from the install folder does nothing (also when running as admin)
2. installation of the software (the full package) completes with no errors
3. printer prints fine and scans throught the printer interface wihtout a problem
4. tried uninstall and reinstall 2-3 times, both as a wireless printer and USB printer, no errors during install
5. The hp print and scan doctor, finds no problem and at the end im able to run Test Scan and the interface opens and works fine.
6. i ran sfc /scannow it says it founds some problems it cant repair - dont know if it means anything
7. in the Devices and Printers screen i see the printer listed and i'm able to print a test page
dontknow what to do next

Hello Salmonela,
Welcome to the HP Support Forums!
That is a very well done post, very informative. Regarding the software interface not loading, I would like to suggest a means of uninstall and install that you may not have tried.
I would like you to use the Microsoft Fixit to uninstall. Then use the HP Printer Install Wizard to install the software again.
Let me know if this clears things up.
Happy Turkey Day!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

External Hard Drive does not mount after connecting to airport

Hello,
I tried finding a solution to this problem already, but people that posted were having issues seeing the drive connected to the airport, while I am having the opposite problem.
After I tried connecting my USB drive my new airport extreme and it worked there and I tested speed and whatnot, I disconnected it and plugged it back into my iMac and now it will not show up anywhere, and will only show up when connected to the airport.
Basically I want my drive that was connected to the airport to connect to my mac again because it is not working.

Zerimar wrote:
After I tried connecting my USB drive my new airport extreme and it worked there and I tested speed and whatnot, I disconnected it and plugged it back into my iMac and now it will not show up anywhere, and will only show up when connected to the airport.
To clarify, when you connect that drive directly to your iMac it doesn't appear on the Desktop? Do you have Finder preferences set (in the General tab) to show "External disks"? Do you see the drive in Disk Utility?

After Effects does not load after any upgrade.

Every upgrade causes After Effects to stop loading properly. It gives error messages. I have contacted support on this on at least two occasions. The technician fixed the problem but it recurs with every update, either Adobe or Nvidia updates. This happens consistently. It seems to me that a consistent problem is one that can be isolated and fixed, yet this has not happened.
Very annoying.
With hopeful respect,
Dr. Ken Larsen

Without system information nobody can even begin to help you. Based on your description you seem to not be installing updates with sufficient user privileges and your system gets stuck on installs that technically never finish or system restore is rolling back files. anyway, as I said, we need a lot more info.
Mylenium

ITunes does not load after upgrading to 7.4.2!

Installed iTunes 7.4.2 just right now. When I try to start it, all it will do is quickly flash "iTunes" in the menu bar without starting; sometimes not even that will occur. I opened the Activity Monitor to watch the app; iTunes does appear to start when I double-click by showing up in the monitor; however, after a few seconds it disappears.
Anybody know what's going on?

Do you have QuickTime 7.2 installed from the Apple website?
Make sure to remove any "hackies", betas, and ShapeShifter, if installed.
Go to /Library/Receipts/drag iTunesX.pkg to the trash and empty.
Repair permissions ..... RESTART
Reinstall iTunes 7.4.2 (Mac) from the Apple website +without performing any other processes during the download or install!+
Repair Permissions
DIXIE

IPhoto does not load after using camera

Hi,
I tried to downloan pics from a Sony camera, and since then I can't use iPhoto. It opens but then I get this message 'loading photos' that stays up forever and in the end nothing happens. I don't want to use the camera anymore, I just want to see my old pics.
Any suggestion?
Thanks!
david

Hi, marranod,
Welcome to the discussions!
Let me see if I understand your question. You connected a Sony to download photos. Did you get the photos into your iPhoto?
Some Sonys create a camera/disk icon on the desktop that needs to be ejected (dragged to the trash) BEFORE you disconnect the camera....I have done this, and it seems to be ok, but you may receive the message that you did not remove the device properly and may have damaged it.
Am I correct that you had other photos in iPhoto, and that now you cannot get iPhoto to load any of your photos?
Try this: close iPhoto, go to User->Library->Preferences->com.apple.iPhoto.plist and drag that plist into the trash.
Repair permissions using Disk Utility.
Relaunch iPhoto and see if it opens now.
Post back if these suggestions didn't work.
Also, next time you download from a camera, use Image Capture ( in your applications folder) to get the photos into your computer, and then import them into iPhoto.

SSDT does not load after a fresh install of SQL 2014

Greetings!
I just installed SQL Server 2014. Interestingly, there is no Feature check for SQL Server Data Tools. After installation (installed SQL 2014 on Windows Server 2012 R2) I try to launch DEVENV.exe and get the error, "Invalid license data. Reinstall is
required."
How do I properly install and configure SSDT with the BI templates?
Thank you.
---------------- GeorgeS, aka "SQLPadawan"

Hi George and Kevin,
There is a similar tread on
Connect which refers to the download location of
Microsoft SQL Server Data Tools - Business Intelligence for Visual Studio 2013. Unfortunately the download is not yet available.
Best regards,
Arjen Krap

Podcast page on site does not load after several years.

There seems to be some kind of code glitch that I hope someone can explain or show me the way to go. Here is what I get when I try to load the podcast page on the web:
# Exception: TypeError
# Message : Value undefined (result of expression $ ( parent ) . select ) is not object.
# File : BlogSummary. js, Line: 147
The above is in place of page data and content that usually comes up. It would help me if I knew where to look for a solution.
Any help would be welcomed. Thanks

Thanks Kel, I simply forgot to do that. <http://www.treetopviews.com> Click on _the podcast at treetopviews_ link at the top of the home page.

ITunes update version 10.6.3 does not load after selecting "download"

iTunes finds update 10.6.3, I select the download and nothing happens. Have not had this problem before.

(apologies, kipwil. This is a side note for wha.)
Some interesting observations on this by markarich over here, wha:
Re: apple software update in windows help!!!!
My thoughts there:
In the normal course of events, SoftwawareUpdate.exe is not set to run as an administrator.
In the normal course of events, if SoftwareUpdate.exe is set to run as administrator, then the Apple Software Update.lnk compatibility mode tab should also be showing that ASU has been set to run as an administrator. So it's not clear why a discrepancy was being seen there.
(Granted, if we've dealing with weird permissions **** here then the symptoms ought to be a bit weird, by definition.)

My ipad revel app does not load after latest upgrade. When will this be fixed? Do we get a credit on our subscription?

My Ipad app doesn't start after the latest upgrade. When will this be fixed? Do I get a credit on my subcription?

Hi,
This is Ian from the revel team. We are working actively with Apple to fix this issue. We are definitely aware of it and trying to fix as soon as possible. I am so sorry for the inconvenience.
Best,
Ian

Qosmio G50-12q - Vista does not load after connecting external USB keyboard

Similar Messages

Maybe you are looking for