Qosmio - How can I create a bootable OS DVD?

Hi ,
Please Help me
I have a Toshiba Qosmio laptop with Microsoft Windows Vista Ultimate .
The DVD of the operating System was attached with the laptop but now i lost it.
But i have the files that was in the original DVD
But i don't know how to make it a bootable DVD to reinstall the OS
THIS IS THE FILES
[http://9ore.net/view/3619/TTTTT.png]
PLZ HELP

Hello
The Toshiba recovery disk creator it’s preinstalled on your notebook and you can find it in the start menu in the Toshiba folder.
But this program is only available if you have the factory settings preinstalled. If you have reinstalled your notebook by using a original Microsoft disk it’s not more installed.
Normally you get the following message if you don’t have created the recovery disks:
+Important INFORMATION+
+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+
+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
+hat you are able to restore your computer to the original factory installed state, even if your computer+
+gets seriously damaged+
In worst case you must order a new recovery disk from Toshiba directly or from an authorized service provider.
Greets

Similar Messages

How can I create a bootable Lion DVD to perform a clean install

Hello,
I was curious if there was a way for me to integrate my Snow Lepoard DVD with the latest update of Lion.
Thanks,
Josh

You can't integrate both, there is a hidden image in the installer file, you can burn it to a DVD, BUT:
-1- You might experience issues during installation (Like I did)
-2- You might experience issues after installation
-3- It is not supported if you have any problem.
If you need this to backup you purchase and avoid to download again ... Make a copy of the installer before you start it (it will be deleted from the Application Folder as soon as you reboot.

How can i create a bootable usb sata for xp

how can i create a bootable usb sata for xp

Installing Windows XP on a portable USB hard drive is not supported.
Carey Frisch

How can I create a bootable DISK IMAGE of my PB Internal Drive?

I would like to make a bootable image of my Hard Drive but without including any Free Space.
You see all I need on the image are the OSX and the programs, NOT the 60GB of Free Space. Disk Utility however wants to create a 80gb image which includes 60GB of Free Space.
I would like to use the Bootable image as a source image to use with the RESTORE function in Disk Utility.
Regards

You'll need a second machine or an external HDD with Mac OS X installed on it.
For purposes of this procedure I'll be calling your machine the 'source' and the second machine or your external HDD the 'target'.
First either boot the source into target mode by holding down the 'T' key while it boots. Once you see the FireWire icon on the screen, let go of the 'T' key and plug the source into the target. If you're going with the external HDD route, boot your source of off your external HDD.
Now, select the drive of your source machine, and hit Apple-I to bring up the information pane. Down at the bottom (in the permissions area) you'll see a check box labeled "Ignore ownership..." Uncheck that.
Open up Disk Utility. Select the source drive and run First Aid and Repair Permissions on it.
Now, select the File menu -> New -> New Disk Image from Folder. You're going to want to hit that big "New Image" button, but don't. Trust me. It'll only cause trouble for you down the road.
Select the source drive as the source. You can leave everything else the same and click "Image".
Select the target as the destination. Click Save.
Wait for a couple of hours (depending on how much stuff you have).
When it's done, select the Images menu -> Scan image for Restore.
Select the disk image you just made and click "Scan".
When that's done you have a restorable image. Just use the restore tab to restore it.
I've done this literally hundreds of times and it's worked every single time.

[Solved]How can I create a bootable backup of my arch linux partition?

I'm trying to get my arch linux installation to have a gui, specifically KDE. I downloaded Xorg and the nvidia proprietary driver 340.24. After installing the nvidia driver and rebooting, my screen stays black and I can't see my console. I can still login and reboot but I just can't see my screen. I've also tried booting into the arch linux fallback listed in the grub bootloader but that also had a black screen. At this point, I just reinstalled Arch Linux since I didn't really have anything on it anyway but this time I hope not to run into this problem. I will try installing a different driver but if I do run into the same problem, I want to be able to just copy over a backup of my OS and just boot off of that instead of completely reinstalling the system. Thanks in advance.
Edit: I read up a bit on the dd command and learned that it can effectively copy an entire partition including the master boot record. Could this be the possible solution? I just wanted to post this edit here to make sure.
Last edited by Firephyz (2014-07-19 20:06:00)

Backing up using dd
When you clone your entire disk the MBR will also be copied over. The wiki just states you can back up just the MBR itself if need be.
I strongly do not recommend just reinstalling your system in the future unless it's needed, you learn nothing from it and it can drive away other users from helping you. Especially if its just and issue to do with Xorg.
Last edited by Kartious (2014-07-18 10:20:23)

How can I make a bootable disk for Mountain Lion?

How can I make a bootable disk for Mountain Lion?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

How do I create a bootable snapshot image of Lion?

How do I create a bootable snapshot image of Lion? In the past, I used disk utilities - restore to create a copy of current hard drive on an external drive. If there was a problem, kids could boot to external and work until internal drive was fixed. This proved to be a great solution. On a new Macbook Pro with Lion, I get an error when I try. It says to do a restore from the recovery disk, but the recovery disk says it is a limited function OSX. I would like a full OSX so they can continue to work and even copy files over if the internal disk is suffering intermittent failures enough not to boot but not enough to keep from copying files. A few years ago one of the kids had a disk/boot failure duing finals but was able to boot from the external hard drive, copy over what he needed and access the internet so that he could finish the exams. Time machine is great, but there are instances where you need a quick fix to keep going until the new hard drive arrives.

I do not run Windows, so I have no idea how to handle that type of situation.
But, just to be clear: disregarding Windows, the recovery option downloads the OS and installs it. Technically, that is not a clone unless you copy the installer and create a bootable OS with it. A clone is an exact copy of your system including all your apps, user settings, files, etc, etc and will exist on an external hard drive in addition to your system on your internal - that is done with CCC or SuperDuper.
And, a GUID partition is created in Disk Utility > click on the drive > choose Partition > choose a layout other than what you now have > there will be a clickable Options button below. Click on that and you can choose GUID. Note: partitioning your drive will erase everything on it.

How can I create JScrollPane in my swing application with scroll bars movin

Hi,
How can we create scrollpanes moving with scrollbars.I tried many times with custom layout.but it does not work if i set custom layout.I hope that I will get my problem solved.
Thanks and Regards,
Rameh RK

This means it is not possible to create a pure unicode file without the byte order mark?
You wouldn't happen to know how a file with byte order mark should read on a Linux system?
Or if this possible or not?
Regards
Christian

TS2756 How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
but not the usb iPhone i used to have.
And when i try to add a new one i dont get a USB option.
can some one help me please??
this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

How can I create a new ring tone for my iPhone 4?

How can I create a new ring tone for my iPhone 4? I followed the Garage Band process and ended up with the ring tone I want as a AAC audio file. It got stored in my iTunes a a song rather than a ring tone. How do I make it a ring tone vs. a song? I tried dragging it t the Ring Tone category at the bottom of the ITunes list, but it won't alloow me to move it?

There's also an easy to use Applescript over at Doug's Applescripts for iTunes. It automates the whole thing. All you do is set the start and stop time on a file in iTuens and run the script. It will do everything else.
Make Ringable v1.1
http://dougscripts.com/475

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word.

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word in the document. I am teacher. So for example when a student came to word he/she did not know, if he/she hovered the cursor over the word, a defintion or other information would appear. You can do this in Word using bookmarks/hyperlinks but I can't figure this out in Pages. I can link it to another point in my Pages document but I just need the text to pop up - not take the reader to another location. THANK YOU!!!!!!

Have you tried Word for Mac?
You will need to test if links survive export or printing to .pdf
Peter

How can I create an csv/excel file using pl/sql and then sending that file

How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.

968776 wrote:
How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.You are trying to do it at a wrong place..
Whay do you want database (pl/sql) code to do these things?
Anyhow, you may be interested in :
{message:id=9360007}
{message:id=9984244}

How can i create datasource on apache server for ADF application?

Hi All,
i my use case i have created simple adf application using ADF BC and want to deploy on Apache server 6.x.
So my question is that how can i create Data Source i have goggling and find two different way to do this.
1. write following line of code on apache server conf/Context.xml file.
<Resource name="jdbc/TestDB" auth="Container"
              type="javax.sql.DataSource"
               driverClassName="oracle.jdbc.OracleDriver"
              url="jdbc:oracle:thin:@localhost:dst"
              username="jagrandb" password="jagrantest" maxActive="20" maxIdle="10"
              maxWait="-1"/>
but when i have used this way i got following exception.
org.apache.tomcat.dbcp.dbcp.PoolingDataSource$PoolGuardConnectionWrapper cannot be cast to oracle.jdbc.OracleConnection
check link-
https://forums.oracle.com/thread/2564233
2. write following line of code apache conf/Server.xml file
<GlobalNamingResources>
    
    <Resource name="UserDatabase" auth="Container"
              type="org.apache.catalina.UserDatabase"
              description="User database that can be updated and saved"
              factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
              pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/TestDB" auth="Container"
              type="oracle.jdbc.pool.OracleDataSource"
              description="User database that can be updated and saved"
              driverClassName="oracle.jdbc.driver.OracleDriver"
              factory="oracle.jdbc.pool.OracleDataSourceFactory"
              url="jdbc:oracle:thin:@//172.31.43.207:1521:dst"
              username="jagrandb" password="jagrantest" maxActive="20" maxIdle="10"
              maxWait="-1"   />
</GlobalNamingResources>
and add this line in context.xml file inside <context> tag
<ResourceLink global="jdbc/TestDB" name="jdbc/TestDB" type="oracle.jdbc.pool.OracleDataSource"/>
but when i have run application i have got following error
log-
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: invalid arguments in call"
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:298)
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:181)
at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(test_jsp.java:110)
at org.apache.jsp.test_jsp._jspService(test_jsp.java:63)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
at java.lang.Thread.run(Thread.java:662)
Aug 2, 2013 5:17:21 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: invalid arguments in call"
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:298)
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:181)
at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(test_jsp.java:110)
at org.apache.jsp.test_jsp._jspService(test_jsp.java:63)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
at java.lang.Thread.run(Thread.java:662)
so what is the solution how to create datasource on apche server which suitable for adf application?
when i test data source using following code used 1. way as i mentioned above its running fine bt not for second.
<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<sql:query var="rs" dataSource="jdbc/TestDB">
select empname from pay_emphdr where empcd='JK1306'
</sql:query>
<html>
<head>
    <title>DB Test</title>
</head>
<body>
<h2>Results</h2>
<c:forEach var="row" items="${rs.rows}">
    Foo ${row.empname}<br/>
</c:forEach>
</body>
</html>
please help me. it is very urgent.
thanks in Advance
Manish

Hi Lindalnci
i have already tried this tutorial and in my post i have defined first way to do using this procedure.
in that case i have got following exception as i have mentioned above
org.apache.tomcat.dbcp.dbcp.PoolingDataSource$PoolGuardConnectionWrapper cannot be cast to oracle.jdbc.OracleConnection

How can I create a Forms9i Runtime for client distribution

Currently we have an application developed in Forms 5.0.6.8.0 our Database has been upgraded to 9i DB. The application is working fine with this combination but we want to upgrade Forms in order to get Oracle Support. We just get the Developer Suite 9i package and we're trying to test our application with this software.
How can I create the client runtime for Forms 9i?
My application will work with Win 95 and 98?
Thanks.

Oracle9i Forms is web-only. Forms 6i is the last release of Forms to have client/server and character mode.
You can test Forms from the Builder by installing iDS. To deploy Forms using iAS follow the documentation. It's all there in the deployment guide.
iAS and Forms doco can be found on OTN.
Regards,
Robin Zimmermann
Forms Product Management

How can i create link between ipad(xcode) and webserver?

Hi, I'm a new to iPad development and i need help,
i'm not good with english but i try to explain my question:
how can i create link between ipad(xcode) and webserver?
(the webserver ".NET" with driver odbc is connected with DB Oracle)
so, how can my ipad application access to the Oracle DB?
Create a webservice (.NET) to be place between iPad and DB, is this correct?
how can i do it?
which are libraries to include in the xcode's framework?
thx

I think the following URL will be your best answer:
http://stackoverflow.com/questions/3510468/connecting-iphone-to-an-odbc-database

Qosmio - How can I create a bootable OS DVD?

Similar Messages

Maybe you are looking for