Qosmio PX30t-A-119 - external Microphone configuration error

I have a RCN-PX30t-A-119 - Qosmio PX30t-A-119 23" Touchscreen All in One PC Core i3-3120M 8GB RAM 1TB HDD
Everytime I try and configure my external Microphone i'm getting the message 'Windows Shell Common DLL has stopped working' and the Microphone doesn't work. Can anyone help me fix this?

According to different information which I found in internet, such error and similar notification appears because the system is screwed up.
Start the command prompt and then Run as Administrator
Then type the command: *sfc /scannow* and press Enter.
If this does not help, uninstall the sound driver.
Reboot the notebook and then install the sound driver again (should download the proper driver from Toshiba driver page)

Similar Messages

  • ACS Server: External Authentication configuration error

    Hi ALL
    I have installed the ACS server and configure properly and it works fine.
    But whenever i restart the machine, following error message appears on the external database configuration wizard.
    External Authentication Configuration Error
    ACS has encountered a problem while attempting to process your request. This could be due to one of the following:
    An incorrect installation or configuration of the third-party DLLs required to support this External Database
    A corrupt ACS configuration
    So after i found this error, i just restart all the seven services and every things works fine.
    I always encountered the same error message after restarting the machine each time.
    Can any body recomend the solution or can help me to resolve the issue.
    Thanks

    Hi,
    Please try the following workaround.
    1. Go to Start > Programs > Administrative Tools > Services.
    2. Stop the following services in the following order.
    CSAuth
    CSDbSync
    CSLog
    CSMon
    CSRadius
    CSTacacs
    CSAdmin
    3. After stopping the following services, start them all again in the following order.
    CSAdmin
    CSAuth
    CSDbSync
    CSLog
    CSMon
    CSRadius
    CSTacacs
    Please let me know if this was able to help.
    If the above doesn't help, please reinstall the ACS as the dll files that are being used
    by the ACS have been corrupted, before uninstalling and reinstalling, do take a
    backup of ACS server database from System Configuration > ACS backup > Backup Now.
    Also make sure that the ACS is installed on the default drive.
    tnx
    somishra

  • NW 04s SP 7: CAF, External Service Configuration Error

    Hi,
    i get an error by calling the <i>Service Registration</i> for External Services (CAF Runtime) in the <i>External Service Configuration</i> Admin Tool.
    At the moment i have n external services deployed. The error appeared when i've called the Service Registration for the first time.
    The installation was finished without any errors.
    The first lines of the exception:
      java.lang.NullPointerException
        at com.sap.caf.mp.mmr.adapter.ServiceDefinitionTypeConverter.convertExternalInterface(ServiceDefinitionTypeConverter.java:507)
        at com.sap.caf.mp.mmr.adapter.MMServiceRetrievalAdapter.getExternalInterfaces(MMServiceRetrievalAdapter.java:547)
    Against the link for the <i>Business Entities</i> in the <i>External Service Configuration</i> works fine.
    Regards
    Wolfgang

    Hi Wolfgang,
    I am getting the same Problem ? Have you got the Solution ?
    Thanks in Advance
    Ashutosh

  • Qosmio PX30t-A-119 is not connecting to WLAN

    My PC keeps telling me no connections are available.
    My router is on and my phone &'iPad can connect to it but my Qosmio can't.
    I managed to connect it via an Ethernet cable but when I removed it it still can't pick up any broadband signal. Any ideas?

    There must be some problem with WLAN settings.
    Try to restart your router.
    Check if the both devices are set to the same WLAN standard.
    Play a bit with WLAN settings. I cannot imagine there is some other reason for this small WLAN issue.

  • Error on External Serrvice Configuration Page NW 20047s SP10

    Hi All,
    I am working on CAF developement. I was trying to develop an CAF application using External Service. I used SAP ECC 5.0 server to import a RFC functional module. It was successfully imported in NWDS. Also it got successfully deployed on the Server NW2004s SP10. But when i opened external service configuration page -> service registery it gave me a null pointer exception.
    To solve the problem, i removed the RFC functional module from NWDS and
    re-deployed the same application, but the error is still there.
    One solution i got is to undeploy the application from the server. After doing this I was able to get the External service configuration page -> service registery without any error. BUT WHEN I DEPLOY THE SAME APPLICATION REMOVING THE RFC THE ERROR IS COMMING AGAIN.
    I think there must be some entry on the server which stores the External services imported on the NW 2004s server.
    Please Help. ITS VERY URGENT
    thanks in advance,
    Regards,
    Sheetal

    I am not using date in my program. Follwing is my error.
    Failed to process request. Please contact your system administrator.
    [Hide]
    Error Summary
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Root Cause
    The initial exception that caused the request to fail, was:
       java.lang.NullPointerException
        at com.sap.caf.mp.mmr.adapter.ServiceDefinitionTypeConverter.convertExternalInterface(ServiceDefinitionTypeConverter.java:507)
        at com.sap.caf.mp.mmr.adapter.MMServiceRetrievalAdapter.getExternalInterfaces(MMServiceRetrievalAdapter.java:547)
        at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerBean.getExternalInterfaces(MMServiceRetrievalAdapterCallerBean.java:158)
        at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:477)
        at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:201)
        ... 47 more
    See full exception chain for details.
    System Environment
    Client
    Web Dynpro Client Type HTML Client
    User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
    Version null
    DOM version null
    Client Type msie6
    Client Type Profile ie6
    ActiveX enabled
    Cookies enabled
    Frames enabled
    Java Applets enabled
    JavaScript enabled
    Tables enabled
    VB Script enabled
    Server
    Web Dynpro Runtime Vendor: SAP, build ID: 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:12:34[UTC], changelist=421181, host=pwdfm101), build date: Thu Dec 28 17:06:00 GMT+05:30 2006
    J2EE Engine 7.00 patchlevel
    Java VM Java HotSpot(TM) Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
    Operating system Windows 2003, version: 5.2, architecture: x86
    Session & Other
    Session Locale en_US
    Time of Failure Fri Jan 12 09:47:51 GMT+05:30 2007 (Java Time: 1168575471082)
    Web Dynpro Code Generation Infos
    sap.com/cafUIconfiguration
    SapDictionaryGenerationCore 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:52:59[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:53:17[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0010.20060719095755.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:40:44[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:58:51[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:39[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:32[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0010.20060719095619.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:50:36[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0010.20061002110156.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:55:32[UTC], changelist=419397, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
    SapWebDynproGenerationCore 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:59:00[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
    sap.com/tcwddispwda
    No information available null
    sap.com/tcwdcorecomp
    No information available null
    Detailed Error Information
    Detailed Exception Chain
    java.lang.RuntimeException: com.sap.caf.rt.exception.CAFBaseRuntimeException: Exception in method getExternalInterfaces.
         at com.sap.caf.wd.services.registry.VwOverview.loadServices(VwOverview.java:661)
         at com.sap.caf.wd.services.registry.VwOverview.wdDoInit(VwOverview.java:133)
         at com.sap.caf.wd.services.registry.wdp.InternalVwOverview.wdDoInit(InternalVwOverview.java:275)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:789)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:296)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:767)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:752)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:705)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.caf.rt.exception.CAFBaseRuntimeException: Exception in method getExternalInterfaces.
         at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:208)
         at com.sap.caf.wd.services.registry.VwOverview.loadServices(VwOverview.java:657)
         ... 46 more
    Caused by: com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method getExternalInterfaces.
         at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:493)
         at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:201)
         ... 47 more
    Caused by: java.lang.NullPointerException
         at com.sap.caf.mp.mmr.adapter.ServiceDefinitionTypeConverter.convertExternalInterface(ServiceDefinitionTypeConverter.java:507)
         at com.sap.caf.mp.mmr.adapter.MMServiceRetrievalAdapter.getExternalInterfaces(MMServiceRetrievalAdapter.java:547)
         at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerBean.getExternalInterfaces(MMServiceRetrievalAdapterCallerBean.java:158)
         at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:477)
         ... 48 more
    Thanks and regards,
    sheetal

  • I am getting "The contents cannot be displayed in a frame" error when tried to acces an external URL configured through launchpad(ESS). How to rectify it?

    Hi Guys,
    We have configured ESS role through launchpad. For viewing payslips we are using an external URL configured through launchpad.
    But when we try to access the configured link in ESS role, it displays "The contents cannot be displayed in a frame" .
    Should I need to change some parameters/settings in Launchpad so that I could overcome this issue.
    Guidance required,
    Regards,
    Ajeeth Kumar S

    Hi Shankar Reddy Chamala,
    Thanks for the alternate solution.
    But the solution you have provided also ended up with the same error
    "The content cannot be displayed in a frame" error.
    Some additional information so that you could help me out,
    The following is the test report .
    HTTP/1.1 200 OK
    Server: TIN-AppServer
    Strict-Transport-Security: max-age=15552000
    Cache-Control: no-cache, no-store, must-revalidate
    Pragma: no-cache
    Expires: Thu, 01 Jan 1970 00:00:00 GMT
    x-frame-options: DENY
    Content-Type: text/html; charset=UTF-8
    Content-Encoding: gzip
    Content-Length: 2421
    Date: Thu, 15 May 2014 14:23:14 GMT
    Connection: keep-alive
    Vary: Accept-Encoding
    The tester has mentioned the yellow highlighted property may be a cause for this issue.
    I googled that the highlighted property is set by the website owners for security reasons.
    Shankar I have another doubt..
    Is it feasible to create an HTML document to open the external link and link the HTML document to the iview and then configure the custom iview with launchpad.?
    -->If yes can you please elaborate the steps for it.
    Thanks and Regards,
    Ajeeth Kumar S

  • Mac, keep getting configuration error 1 when trying to open files re-installed from external drive

    I recently had to do a clean install of my computer and tried to run my Adobe applications after installing them from a hard drive backup. It keeps giving me Configuration Error 1. I tried to take a different route and use my serial number to activate Adobe Acrobat X Pro and my serial number will not work to activate the free download.
    I downloaded a university copy of Adobe Creative Suite Design Premium CS5.5 in September 2011.

    http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html
    Mylenium

  • Miracast on Qosmio PX30T-A-14T

    Just tried using a MS Wireless Display adapter on my AIO and when I try to "project" under devices it tells me "your PC cant project to another screen".
    This version of the PX30T just has the on-board Intel Graphics adapter, just wondering if it is not actually Miracast capable. As I am not even getting this far I must assume I cannot extend/duplicate the desktop with the on-board HDMI and it is nothing to do with Miracast really. The HDMI on in seems to be HDMI in only.
    Does anyone know if this is my limitation before I muck around for days looking for different drivers?

    Originally Posted by Jimi
    Hi
    Toshiba Qosmio PX30T-A-14T PQQ30E-02E01FEN seems to be equipped with the Intel Intel Pentium 2020M CPU and this CPU contains the Intel HD graphic chip.
    http://ark.intel.com/products/71142
    As Im not mistaken the Miracast isnt supported on PCs with Intel HD Graphics 3000 or lower.
    Regarding the active display change:
    Toshiba Button Support Utility allows you to configure the function keys.
    The Fn+ F5 or Fn + F4 could be configured in order to change the active display device
    If the display is not displayed on external monitor or TV you would need to change the resolution.
    By the way; dont mix the HDMI IN port and HDMI OUT port.
    Devices equipped with HDMI out port (camcorder or notebooks) could be connected to HDMI IN port to get the display on this All in one computer.
    HDMI OUT port provides audio and video signals to another devices (i.e HDMI capable display)
    Thanks, that link to the Intel info confirms no Intel wireless display functionality with that CPU, much appreciated, saved me a lot of time trying to get this to work. Agree on the HDMI, seems to be in only, can be used with a device (gaming console for example) without powering on the PC. But then I have a TV for that!

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    Logon failure: unknown user name or bad password 
    am using Windows integrated security,version of my sql server 2008R2
    I have go throgh the different articuls, they have given different answers,
    So any one give me the  exact soluction for this problem,
    Using service account then i will get the soluction or what?
    pls help me out it is urgent based.
    Regards
    Thanks!

    Hi Ychinnari,
    I have tested on my local environment and can reproduce the issue, as
    Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
    Please also find more details information about when to use the execution account, if possible,please also not specify this account:
    This account is used under special circumstances when other sources of credentials are not available:
    When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
    When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
    Execution Account (SSRS Native Mode)
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • SQL Server Reporting Services Configuration Error(Subscription)

    I have just deployed a new project on the server and i can successfully run report from the BI Site; [Server Name]\Reports and no issue there. But when i try to create Subscription for the same report; I am trying File Share and it throws error as given
    below. Do i have to configure anything for subscription in the Reporting Services Configuration Tool???
    I also have few questions regarding Configuration;
    What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
    What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
    What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
    Here is the error I am getting in the log file.. 
    ReportingServicesService!library!b!06/17/2010-09:35:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for
    more information., AuthzInitializeContextFromSid: Win32 error: 110;
     Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
    ReportingServicesService!library!b!06/17/2010-09:35:04:: i INFO: Initializing EnableExecutionLogging to 'True'  as specified in Server system properties.
    ReportingServicesService!subscription!b!06/17/2010-09:35:04:: Microsoft.ReportingServices.Diagnostics.Utilities.RSException: The report server has encountered a configuration error. See the report server log files for more information. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. See the report server log files for more information.
       at Microsoft.ReportingServices.Authorization.Native.GetAuthzContextForUser(IntPtr userSid)
       at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName)
       at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken)
       at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation)
       at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper)
       at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml,
    ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
       at Microsoft.ReportingServices.Library.RSService._GetReportParameters(ClientRequest session, String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials)
       at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
       at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
       at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
       at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
       --- End of inner exception stack trace ---
       at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
       at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]&
    secondaryStreamNames)
       at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo)
       at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
       at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.Deliver(Notification notification)
    I also get following error when I try to create email Subscriptoin
    w3wp!processing!6!6/17/2010-09:58:53:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'., ;
     Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'. ---> System.Data.SqlClient.SqlException: Could not obtain information about Windows NT group/user 'THRY\RPUser',
    error code 0x6e.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
       at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.ImpersonateUser()
       at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.Open()
       at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.ReportRuntimeDataSourceNode.OpenConnection(DataSource dataSourceObj, ReportProcessingContext pc)
       --- End of inner exception stack trace ---
    Thanks,
    RP

    Hi RP,
    For your first issue "cannpt create subscriptions", after analyzing the error logs, it seems to be caused to the service account for the Reporting Services service does not have proper permissions to invoke the WIN32 API.
    The SQL Server Reporting Services invokes the Win32 API to impersonate user's permissions to write files to shared folder or call COM+ components.
    In this case, we can change the service account to a account has permissions to invoke the Win32 API to solve the issue. For example, we can change the account to be NetworkService or LocalSystem:
     1. Backup the encryption key using Reporting Serivces Configuration Manager.
     2. Change the service account using Reporting Serivces Configuration Manager.
     3. Restore the encryptiong key using Reporting Serivces Configuration Manager.
    For your others questions, please see the following inline reply:
     --What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
     The account should be a Windows account or the SQL Server account, that has read permissions in the source data base at least.
     --What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
     The account must be a Windows user account. For best results, choose an account that has read permissions and network logon permissions to support connections to other computers. It must have read permissions on any external image or data file that you
    want to use in a report. Do not specify a local account unless all report data sources and external images are stored on the report server computer. Use the account only for unattended report processing.
     --What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
     You are right. It must be a Windows account, which has permissions to access and write files to the shared folder.
    For more information, please see:
    Configuring the Report Server Service Account:
    http://msdn.microsoft.com/en-us/library/ms160340.aspx
    Execution Account (Reporting Services Configuration):
    http://msdn.microsoft.com/en-us/library/ms181156.aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Jin Chen
    Jin Chen - MSFT

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

    I am able to run the report fine in BIDS in the preview window, and it deployes fine.  When it goes to view the report in the browser, I get the following error.  There is no domain, I am using a standalone computer with SQL Server and SSRS on
    this one machine.
    Can anyone point to where I might configure the permission it is looking for?  thanks!  Steven
    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    The user name or password is incorrect
    Steven DeSalvo

    Hi StevenDE2012,
    Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
    Configuration is not correct.
    Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
    a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
    to other computers. To configure the account, please refer to the following steps:
    Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
    On the Execution Account page, select Specify an execution account.
    Type the account and password, retype the password, and then click Apply.
    In addition, please verify you have access to the Report Server database by following steps:
    Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
    Go to Database, Verify that you can connect to the database.
    Make sure you are granted public and RSExecRole roles.
    Reference:
    Configure the Unattended Execution Account
    Configure a Report Server Database Connection
    If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
    Thanks,
    Wendy Fu

  • Which permissions required for using CAF External Service Configuration?

    Hello,
    I have written an application service which invokes an external RFC. To this end, I have imported the desired RFC as external service and wrapped it as an application service.
    However, when invoking this application service I get an error message that the external service has not been configured. I have learned that I have to use CAF's External Service Configuration tool.
    Unfortunately, this tool complaints that I don't have the required administrator permissions. This happens even when I log in with the administrator account.
    What do I do wrong?
    Best regards
    Alexander

    I just have found the required role. It is role SAP_CAF_ADMIN.

  • Using an external microphone with a Mac Pro Tower

    I have a Mac Pro tower with OS 10.4.11 and I have a question regarding recording sound through an external microphone.
    I own a microphone with a 1/4" jack and when I plug it into the designated input on the back of my tower, I'm not getting any sound. I've troubleshooted with a couple different microphones and none seem to work. Am I doing something wrong? Is there some sort of configuration that I have to do when using a mic?
    Please help!

    I'm sorry, but that's not really my area of expertise. If you are planning to use this for simple voice-recording you could try the Griffin iMic device which helps provide both pre-amplification and impedance matching between a mini-plug mic and a USB port for sound input. I've used it recording music from a boom-box to a MacBook.
    The tech specs state that the audio line-level in port is:
    Input impedance greater than 20,000 ohms
    Input level: Max 2 V rms (+8.2 dbµ)
    I would look for a mic that meets those specifications. MacSpeech.com has several microphone/headset recommendations for use with their Dictate and iListen voice recognition software. I would think that their suggestions would be useful.

  • 'Configuration Error: 6' appears when attempting to open Photoshop on new Macbook

    I had Photoshop CS5 installed on my previous Macbook which is now broken, however a friend of mine was able to copy it on to an external hard drive for me. I have now purchased a new Macbook, copied and installed Photoshop on to it from the external, however when I try to open it, 'Error: 6' appears, it states: 'Configuration error. Please uninstall and reinstall the product. if this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.'
    How do I fix this problem? Thank you in advance.

    Install Photoshop from scratch from the original medium, download or DVD.
    Whether your friend "copied" Photoshop from your own broken Mac Book or from his machine (the latter would be completely illegal software piracy, by the way), that will NEVER work on your new machine.
    First, the Photoshop installation places many auxiliary files outside the Photoshop folder all over the place.  Copying misses a bunch of critical files.
    Second, the activation of the installed copy of the activation is tied to the serial numbers on the CPU of the machine and is useless in any other machine.
    I repeat:  Install Photoshop from scratch from the original medium, download or DVD.

  • 'Configuration error: 6' appears when I attempt to open Photoshop on my new Macbook

    I had photoshop CS5 installed on my previous Macbook which is now broken, however a friend of mine was able to copy it on to an external hard drive for me. I have now purchased a new Macbook, copied and installed Photoshop on to it from the external, however when I try to open it, 'Error: 6' appears, it states: 'Configuration error. Please uninstall and reinstall the product'.
    I have tried uninstalling and reinstalling but to no avail. How do I fix this problem? Thank you in advance.

    Install Photoshop from scratch from the original medium, download or DVD.
    Whether your friend "copied" Photoshop from your own broken Mac Book or from his machine (the latter would be completely illegal software piracy, by the way), that will NEVER work on your new machine.
    First, the Photoshop installation places many auxiliary files outside the Photoshop folder all over the place.  Copying misses a bunch of critical files.
    Second, the activation of the installed copy of the activation is tied to the serial numbers on the CPU of the machine and is useless in any other machine.
    I repeat:  Install Photoshop from scratch from the original medium, download or DVD.

Maybe you are looking for