Qosmio X300 -130 and Vista 64-bit - On screen Display doesn't work

Hi there,
I recently bought a Qosmio X300-130 notebook which shipped with Vista Home Premium.
The problem was that I could not get onto our domain at the office. So installed Vista Business 64-bit. I found all of the drivers online and everything works perfect except for my onscreen display (When changing the volume, contrast,etc). Can anyone please tell me what software or driver did I forget and where can I find it?
Regards

Hello
I really don't know what is wrong there but here is the Vista 64-bit installations order for your notebook model:
Windows Vista
Intel(R) Chipset Module V8.7.0.1007
Intel(R) Turbo Memory Driver(Intel iMSM Driver) V1.6.0.1034
nVidia Display Driver V175.80
Realtek Audio Driver V6.0.1.5608
Realtek Network Driver V6.205.403.2008
Alps Touch Pad Driver V7.102.302.101
Synaptics Touch Pad Driver V11.1.1.0
Jmicron CardBus Controler V1.00.13.03
TOSHIBA Software Modem V2.1.87(SM2187ALS04)
SliconLab Modem Driver V6.12.14.03
WLAN driver
Chicony Camera Software V1.7.193.0508
Bluetooth Stack for Windows by Toshiba V6.10.07.2T
CIR Port Driver V2.5.0.0
TOSHIBA Value Added Package V1.1.19_64
TOSHIBA Hardware Setup Utility V1.57.0.3C
TOSHIBA Supervisor Password V1.57.0.2C
Flash Cards Support Utility V1.57.0.2C
TOSHIBA SD Memory Utilities V1.9.1.9
Authentec AES1610 Fingerprint Utility V2.1.11.0
TOSHIBA ConfigFree V7.2.16
TOSHIBA WPS Library V1.0.0.7
TOSHIBA Assist V3.00.04
TOSHIBA Speech System V1.00.2515
TOSHIBA Extended Tiles for Windows Mobility Center V1.01
Dolby Control Center V1.1.0406
TOSHIBA Remote Control Manager V2.4.0.3
CD/DVD Drive Acoustic Silencer V3.01.03
TOSHIBA DVD PLAYER V1.31.11
TOSHIBA TRS Driver V4.1.2007.1115
HDMI Control Manager V1.7.0.5.64
TOSHBA Face Recognition(SmartFaceV) V2.0.2.64
So if you install your Vista and all Toshiba stuff following this installations order I believe everything should work properly.
If not I don't know what can be the problem. Maybe you then have just bad luck. ;)
Good luck!

Similar Messages

  • My iPhone 5 fell down on the floor, than when I pick it up the most of the screen turns to different colors( lines or other stuff) , and when I touch the screen, it doesn't work anymore ,and I search how to fix it on google, but I follow the instructions

    What can I just do now, how can I fix it

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    However...
    In your caes (having dropped the iDevice) it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required... Be sure to make an appointment first...

  • Qosmio x300-130 - ctrl-buttons won't work anymore

    Hello everyone
    Im having some problems with my ctrl-buttons. They simply won't work anymore, they used to but slowly they became unstable and now they won't work at all.
    So now I ask you if there is any way to solve this problem without sending the computer to repairs.
    My computer is a Qosmio x300-130 and I have had it for about two months.

    Hello
    It is really strange issue with those CTRL buttons functionality. Googling around I found several forums where people report about this. Unfortunately nobody has explanation why this happen.
    I use Vista and WXP SP3 on my Satellite Pro P300 and until now everything works properly.
    I can just imagine some Microsoft update is responsible for this. Try to roll back OS to earlier time using system restore tool.
    Please post results.
    Lets see if someone else has other advice.

  • My windows say the quicktouch on screen display has stopped working and i have no volume??

    HP Pavillion Entertainment PC dv6000
    p/n KC302UA
    operating system-Windows Vista
    message says Quicktouch Screen display has stopped working. I have no volume and my volume bar wont work.
    How do I fix this?

    Please do a BIOS update and this may fix the issue,
    If you wanna know how to do the same, please go to HP.com- Support & Drivers- Enter product number - Choose OS - Select BIOS - Download and install. Make sure that the Charger is connected to the Computer.

  • Fingerprint Software 5.8 for Windows XP and Vista (32-bit)

    Fingerprint Software 5.8 for Windows XP and Vista (32-bit) points to:.
    Version: 5.6.2.3650 Release Date: 2007/09/27 which is OLD!!!!
    we ar stiil waiting for new driver? package? .. have lot's of customer which acan not help! to fix their machines?
    If you have a woman with smal hands/wingers .. there is no way to make it WORK!!!
    When will we see new turbo memory drivers?? Have more than 50 customer/notebooks wit turbo memory diabeld. as it not usable, but they have paid for a product!!!!
    Come ON !!
    Message Edited by TeMpL on 07-09-2008 07:29 PM

    Hi there!
    Please see  this thread for the download links for the Fingerprint Software 5.8 ....
    This issue was already raised in the ThinkVantage subforum here at Lenovo Forums and it is resolved.
    Regarding the Turbo Memory, please keep in mind that the hardware only works with Vista. Windows XP does not support turbo memory thus the piece of hardware is rendered useless. With regards to Turbo Memory usage in Vista, the latest drivers do fully support the card in Vista and since there are no technological changes, there is no need for additional or new drivers.
    Hope this helps!
    Steve
    Message Edited by icantux on 07-09-2008 02:28 PM

  • I upgraded my 3 yr old iMac to Snow Leopard and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site, but still no joy.  Any suggestions?

    I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site and installed them, but still no joy.  Any suggestions?

    aspaceman,
    Perhaps I owe you an apology.   Having re-read that downloading from HP was unsuccessful I feel uncomfortable.  Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
    Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply.  

  • HT4798 I have forgotten my password for mountain os. I have followed the instructions about going to "User group" and enetering my apple ID. It doesn't work. Can anyone help me? Thank you.

    I have forgotten my password for mountain os. I have followed the instructions about going to "User group" and enetering my apple ID. It doesn't work. Can anyone help me? Thank you.

    Welcome to the Apple Support Communities
    https://discussions.apple.com/docs/DOC-4101

  • I've upgraded to itunes 11.1.4 Now my ipod and my wife's will not connect/ sync. Itunes says it can detect an ipod but it can't be identified correctly. I have uninstalled and re installed ITunes but it still doesn't work

    I've upgraded to itunes 11.1.4 Now my ipod and my wife's will not connect/ sync. Itunes says it can detect an ipod but it can't be identified correctly. I have uninstalled and re installed ITunes but it still doesn't work

    I too am having the same problem. I'm glad to know it's not just me

  • HT1551 My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • My macbook pro suddenly turn off and now when I turn it on the display doesn't work but it is on!

    Hello everyone,
    My macbook pro 15" suddenly turned off. Now i tried several time to switch it on and seems it is working but the display doesn't function or there are many wired pictures coming up sometimes.
    can anyone please help me with this issue?
    Thanks

    Welcome to the Apple Support Communities
    Your Mac can't find any bootable partition.
    1. Insert the Mac OS X DVD that came with the Mac and press C key while your Mac is starting.
    2. Select Utilities > Disk Utility, choose Macintosh HD in the sidebar and repair the disk. If it doesn't work, take the Mac to an Apple Store.
    Also, open  > Startup Disk, select Macintosh HD and restart. Maybe your Mac has forgotten the startup partition

  • TS1559 My wifi button on my 4s is dimmed and I cannot turn on wifi. I have reset network setting and connected to PC iTunes and got updated iOS software. Still doesn't work. Any suggestions?

    My wifi button on my 4s is dim and I cannot connect to wifi. I have reset network connections and connected to PC iTunes and downloaded ios7.4. I restarted the phone and it still is not working. Any suggestions?

    I have the same problem with my 4s too. Wifi is greyed out and won't switch on, plus Bluetooth doesn't work either. From what I can gather it's caused by either a broken or overheating WiFi chip. I'm planning to take mine to an Apple store to see if it can be repaired.

  • When I insert headphones and then I remove them, volume control doesn't works.

    When I insert headphones and then I remove them, volume control doesn't work more, and I have to operate on system preferences=>sound=>output volume. Whay does it happens and  how can I fix it?

        Yes, I am using 09 with out issues.  Just have to remember to use "open with 09" or open pages 09 first then my document.
      I create some amazing cards and posters with 09 that when on a PC I would have to use both Word and Publisher to create.  Flipping back and forth. 
      Apple if you're  listening please, give us back our layout options and even add a few more design options like beveled and 3D text.

  • Hi I'm new in this Ae and i loved it and started to get into editing but when i watch videos on how to use effects like magnify and CC light burst 2.5 it doesn't work why?

    hi I'm new in this Ae and i loved it and started to get into editing but when i watch videos on how to use effects like magnify and CC light burst 2.5 it doesn't work why?

    First, I want to clear up some vocabulary issues. After Effects is not intended for editing video. Editing involves cutting shots together to tell a story. Premiere Pro edits video. While you technically can cut video together in AE, Premiere is much, much better for that.
    After Effects is used for creating shots - visual effects, compositing, motion graphics, animation, color correction, color grading, etc.
    What exact version number of AE (down to the decimal points) are you using? Plus the questions Todd asked, plus the info in the link he gave.
    Also, if you're new to AE, you should really start here. This resource will give you a foundation in how to actually use After Effects that will probably clear up your current problem and prevent much more frustration in the future.

  • Samsung - P2 8GB* MP3 and Video Player with Touch-Screen Display - Black

    I amthinking of purchasing theSamsung - P2 8GB* MP3 and Video Player with Touch-Screen Display. I have gone to Best Buy to ask them where I can download TV and movies for the player and they have no help at all! They told me they had no idea. Can someone PLEASE help me? I like the fact that it is Bluetooth compatible but I want to be able to buy shows and movies. Where can I get them for a non-Ipod MP3 player??????  

    I LOOKED EVERY WHERE FOR THE P2 TOUCH SCREEN MP3 PLAYER BY SAMSUNG AND KNOW THAT I HAVE IT I AM VERY STRESSED BY IT. IT  WANT LET ME LOG-IN TO THE SAMSUNG MEDIA STUDIO. CAN SOMEONE HELP I HAVE NOT PUT  ANY MUSIC OR ANY THING ON IT !!! PLEASE HELP!!!!

  • Soot and dust in a matrix screen display IMAC 27!!!

    Soot and dust in a matrix screen display!!!???
    I have IMAC27 2009-2010 year (warranty expired) the glass matrix has appeared under the smoke! 
    I see dark stains, spots, in a matrix screen (under the pointer maus) I do not pridoval this value, but the spots becoming darker and more! I know that Apple respectable company, and many displays are replaced by smoke! There was a big scandal because of the spots on the display. I do not want to be a year that my screen was half black?! On the Internet a big scandal because of this, I demand the replacement of the matrix! If I have to I plead with you as well as Zouu Hongk! In the service center of Russia denied me Chinta my screen?!
    Your problem ima27 and you refuse to rid my screen of smoke!?
    What do I do? Help me please!

    I do not smoke!!
    You can see that I am not alone!
    https://www.google.ru/search?q=ratina&sugexp=chrome,mod=11&sourceid=chrome&ie=UT F-8#hl=ru&newwindow=1&sclient=psy-ab&q=smoke+imac+screen&oq=smoke+imac&gs_l=serp .1.1.0i19l2j0i5i10i19j0i5i30i19.441589.452427.1.455453.18.14.0.0.0.4.1771.8401.3 -2j6j4j1j0j1.14.0...0.0...1c.eVPdlnzz0nM&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=71 90117a68e1f74&biw=1536&bih=783

Maybe you are looking for