Qosmio x300-130 - ctrl-buttons won't work anymore

Hello everyone
Im having some problems with my ctrl-buttons. They simply won't work anymore, they used to but slowly they became unstable and now they won't work at all.
So now I ask you if there is any way to solve this problem without sending the computer to repairs.
My computer is a Qosmio x300-130 and I have had it for about two months.

Hello
It is really strange issue with those CTRL buttons functionality. Googling around I found several forums where people report about this. Unfortunately nobody has explanation why this happen.
I use Vista and WXP SP3 on my Satellite Pro P300 and until now everything works properly.
I can just imagine some Microsoft update is responsible for this. Try to roll back OS to earlier time using system restore tool.
Please post results.
Lets see if someone else has other advice.

Similar Messages

My iPod Nano, 4th gerenration buttons won't work anymore, but I can still shake iPod to get song to shuffle... any help?

My iPod Nano, 4th gerenration buttons won't work anymore, but I can still shake iPod to get song to shuffle... any help?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Qosmio X300 -130 and Vista 64-bit - On screen Display doesn't work

Hi there,
I recently bought a Qosmio X300-130 notebook which shipped with Vista Home Premium.
The problem was that I could not get onto our domain at the office. So installed Vista Business 64-bit. I found all of the drivers online and everything works perfect except for my onscreen display (When changing the volume, contrast,etc). Can anyone please tell me what software or driver did I forget and where can I find it?
Regards

Hello
I really don't know what is wrong there but here is the Vista 64-bit installations order for your notebook model:
Windows Vista
Intel(R) Chipset Module V8.7.0.1007
Intel(R) Turbo Memory Driver(Intel iMSM Driver) V1.6.0.1034
nVidia Display Driver V175.80
Realtek Audio Driver V6.0.1.5608
Realtek Network Driver V6.205.403.2008
Alps Touch Pad Driver V7.102.302.101
Synaptics Touch Pad Driver V11.1.1.0
Jmicron CardBus Controler V1.00.13.03
TOSHIBA Software Modem V2.1.87(SM2187ALS04)
SliconLab Modem Driver V6.12.14.03
WLAN driver
Chicony Camera Software V1.7.193.0508
Bluetooth Stack for Windows by Toshiba V6.10.07.2T
CIR Port Driver V2.5.0.0
TOSHIBA Value Added Package V1.1.19_64
TOSHIBA Hardware Setup Utility V1.57.0.3C
TOSHIBA Supervisor Password V1.57.0.2C
Flash Cards Support Utility V1.57.0.2C
TOSHIBA SD Memory Utilities V1.9.1.9
Authentec AES1610 Fingerprint Utility V2.1.11.0
TOSHIBA ConfigFree V7.2.16
TOSHIBA WPS Library V1.0.0.7
TOSHIBA Assist V3.00.04
TOSHIBA Speech System V1.00.2515
TOSHIBA Extended Tiles for Windows Mobility Center V1.01
Dolby Control Center V1.1.0406
TOSHIBA Remote Control Manager V2.4.0.3
CD/DVD Drive Acoustic Silencer V3.01.03
TOSHIBA DVD PLAYER V1.31.11
TOSHIBA TRS Driver V4.1.2007.1115
HDMI Control Manager V1.7.0.5.64
TOSHBA Face Recognition(SmartFaceV) V2.0.2.64
So if you install your Vista and all Toshiba stuff following this installations order I believe everything should work properly.
If not I don't know what can be the problem. Maybe you then have just bad luck. ;)
Good luck!

IPod nano gen 4 forward button won't work, and the hold switch won't either. I've tried restoring it and it didn't fix the problem. Any suggestions?

The forward button won't work and the hold switch doesn't either. I tried restoring it, but that didn't work.

Restore to factory settings.new iPod if you have not yet already. If still problem time for an appointment at the Genius Bar of an Apple store.

My ipod home button won't work or its jammed help

My ipod home button won't work or its jammed or something help.

I would if its still under warranty ask apple to repair it, thats what i did.

"ctrl-c" won't work in terminal

All,
I just finished installing maverick. and for some weird reason, "ctrl-c"won't work in terminal.
i cannot break, and my commands will keep running.
for example pinging google will keep going and the only way to stop that, is to close the whole terminal.
pressing "ctrl z"or "Ctrl c"wont work, it just shows z or c characters...
I checked the keyboard viewer and noticed two characters always set to orange which are:
' & `
now the weird thing, that if these were trully pressed, i wouldn't be able to type and you'll actually see lots of ticks and single quotation marks.
Any hint on how to fix this ?

Melophage,
Thanks for answering.
i'm not sure i understood your questions proeprly, so i will try my best to answer,hoping that's the right response.
1. input sources: is set to "US. international - pc"
2. output of stty -a:
stty -a
speed 9600 baud; 24 rows; 80 columns;
lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl
          -echoprt -altwerase -noflsh -tostop -flusho pendin -nokerninfo
          -extproc
iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel iutf8
          -ignbrk brkint -inpck -ignpar -parmrk
oflags: opost onlcr -oxtabs -onocr -onlret
cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow
          -dtrflow -mdmbuf
cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>;
          eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V;
          min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T;
          stop = ^S; susp = ^Z; time = 0; werase = ^W;
And this is the view of my keyboard viewer:

I loaded software updates to Settings now my lock button won't work. I was told to do a restore but it keeps timing out. I disabled virus software which didn't help. How do I get it to restore?

I loaded software updates to Settings and now my lock button won't work. I was told to do a Restore but it keeps timing out. It says it will take 58 minutes to do the restore. I disabled my virus software but that didn't help. Any suggestions so I can do a Restore?

Try the Manual Install discussed here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

Vertical scrolling with TrackPoint's middle button won't work on MS Word

Question:
I have a T42 ThinkPad and the vertical scrolling with TrackPoint's middle button won't work on MS Word and therefore not in my email either. Big pain in butt as I'm so used to using it. Are there any patches that fix that? Any ideas on why it won't work?

It's really weird. My suggestion would be that you install the most up-to-date driver by direct downloading or via System Update (if you haven't updated the driver).
Rockwill
ThinkPad T61p 6459A12

My home button won't work

My husband's I-pad has been playing up! His home button won't work, and this keeps happening.

Try a reset ...
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Beyond that, restore the iPad > iTunes: Restoring iOS software

My lock screen button won't work how can I fix this?

My lock button won't work, every time I click it it won't lock my screen unless I press the button hard enough and or in a weird gesture, how can I fix this where I don't need to struggle locking it?

Stating the obvious,
Can you Reset it?
Have you checked if the Hold switched is not in locked position? (should not see the red mark)

If my iPod Touch 4G is under warranty, can Apple repair or replace it if the home button won't work?

I've had my iPod Touch 4G for about 10 months now so the warranty is still in affect. The home button appears to be stuck or won't work anymore. I can press down on it and I hear a click but it's inresponsive. I've already looked up and tried numerous things to fix it, but nothing works. I have assistive touch but ever since I started using it, apps close or freeze within minutes of opening it.
If I bring it to an apple store or send it in, can they fix the home button or replace my itouch?
Thanks

If the ipod is defective then they will replace it.
Make an appointment at the genius bar.

I just installed iOS 6.1.5 and now my power button won't work

After installing iOS 6.1.5 and reinstalling the apps that it deleted from my computer my power button won't work on my iPod touch 4th gen. Any suggestions?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My music button won't work.

updated my iphone to ios7 and everything was fine. but when i tried to use the music buttons to skip/play songs, the buttons won't work. as in i'm not able to skip or play a song. i have to go to the music icon and do it from there. can someone help?

Genius reservation http://www.apple.com/retail/geniusbar/

Ipod power button won't work

As of late, my power button is acting weird. Either when you press the power button it won't turn on.. or it will.. Sometimes it works sometimes it doesn't..
To get it to turn off if the power button won't work, I'll just drain the battery. Anybody know anything to help?

That's a hardware problem. Apple doesn't repair it. If there is no sign of abuse (don't try to fix it yourself), they replace it with a refurbished unit. The fixed-price for non-warranty replacements can be found here.

Play/pause button won't work

Ipod Classic 80Gb
Play/pause button won't work 9/10 times.
Any idea on how to fix that?

Besides resetting the iPod, have you attempted restoring it? You can do that by clicking the "Restore" button on the the iPod's Summary page in iTunes.
Assuming that doesn't work, you can check your [warranty status|https://selfsolve.apple.com/GetWarranty.do] to see if you are still covered for hardware repair. I doubt any 30GB iPods are still under warranty, since they were discontinued over two years ago, but you said you got it in March 2009 - did you purchase it used?
Whether it's under warranty or not, you can always make a Genius Bar appointment at your closest Apple Store and see if they have any other suggestions, free of charge. If it's a hardware problem, they can replace the iPod for you, but there would be a charge to do so if you're out of warranty.
Shawn

Qosmio x300-130 - ctrl-buttons won't work anymore

Similar Messages

Maybe you are looking for