Qosmio X300-13P issues of Win 7 64bit upgrade

Hi,
I've upgraded X300-13P up to Win 7 Home Premium 64 bit.
Since the model somehow not in the Qosmio X300 models list (why???), I found all needed drivers (win7 64 bit, russian) using laptop s/n and drivers filter.
Now laptop works.
Issues (please, help to resolve some of it):
The Fn buttons don't work it was installed
TVAP vap-20100419162607.zip, 07/21/10
Company Toshiba
Type Value Added Package
Subtype (none)
Size (Kb) 71188
Ver 1.2.40
Language Universal
Country World Wide
Game Console launches only after deleting a driver "HID Miscosoft eHome transiver" or something like this.
Unfortunately, it is automatically created after reboot.
How to delete the "eHome" at all - I'm not sure if my laptop has the device?
It's impossible to register fingers - after I agree to save the scanned fingers software write "Such templates already exist..." and does nothing.
fp-sw-20091109111332.zip
11/09/09
Toshiba
Fingerprint Software
(none)
(Kb) 24529
1.0.2.12
Universal
World Wide
How to resolve?
I upgrade memory from 2x2Gb on 2x4Gb (bought in a Toshiba shop with a consultant - DDR3-1066M), but performance decreased - on Vista it was "5,4 Windows", now - "4,5 Windows".
The "bottleneck" - operations with numbers (sorry - I translate from russian: probably not accurately).
What should I do to increase?
Please, advise.

Hi *PauPau*,
thanks for the answer.
> > Since the model somehow not in the Qosmio X300 models list (why???),
> The X300-13P is listed on Toshiba European driver page.
>
You're right - I've found the place - my fault, sorry.
> > The Fn buttons don't work it was installed
> Install VAP and Flash Card Support Utility!
> I used the Flash Card Support Utility which is released for L500 series.
>
It's not clear: what does mean "L500 series" - soft, say, for the "Satellite L500-ST2521" is applicable for Qosmio X300? Any model???
And only Flash card for "L500", but native VAP for X300?
> >HID Miscosoft eHome transiver
> This might be the infrared controller which is needed for the usage of remote controller in Windows Media Center. You could disable this is device manager.
>
Unfortunately - the button "Disable" is disabled for the driver. :(
> >It's impossible to register fingers - after I agree to save the scanned fingers software write "Such templates already exist..." and does nothing.
>
> First of all you should delete all fingerprints. Then you should uninstall this software.
> Reboot the unit and clean the registry using CCleaner. Reboot once again and install the fingerprint again.
OK - I'll try.
Thanks a lot!

Similar Messages

Satellite L500-12t: FN buttons issue after Win7 64bit upgrade

Hi
i have L500-12T and i upgrade to WIN 7 64 bit.
After the upgrade the FN key not working and i can't turn on the wireless card .
So i can't surf with the wireless.
I download all the driver that i found on the site of toshiba and it's still not working.
What i can do ?
*thanks*

Hei alior3,
I think you didnt install or update the Toshiba tools I agree with MasterG.
It has nothing to do with the device drivers (e. g. WLAN card) because you need Value Added Package and Flash Cards Support Utility. Both tools are necessary for using FN key combinations.
Everything you can download here:
http://eu.computers.toshiba-europe.com
If you have more questions check also the forum content. You will find many threads about FN keys and how to solve such problems. :)

Audio and video issue after Win 10 Upgrade - Split X2 laptop 64-bit

Any solution to the Audio and Video issues on Split X2 13" laptop after Windows 10 FREE Upgrade?? - Intel Core i5 processor- 4GB memory I'm sure others are have the same Audio/video problems: - there is Sound and video playback but the sound and video is repeated slowly forward....impossible to understand the audio. The video is clear but also being played in repeated frames as it moves slowly forward!- sounds coming out of the speakers ok - everything was working great on Windows 8.1 (before upgrading to Windows 10). there must be some kind of driver upgrade for IDT High Definition CODEC BEATS audio... is there a work-around until a real fix is provided?? Regards - VK

I have downloaded and installed the HP recommended IDT Audio Driver using the HP Assistant. The current installed IDT High Definition Audio CODEC driver is: STWRT64.sys 6.10.6498.0 The laptop was rebooted but the problem still the same.....Audio is garbeled and impossible to understand the words...video seems ok when playing Youtube videos. My Split 13 X2 product id is: E2S66AV BIOS F.27

Audio and (sometimes) video issue after Win 10 Upgrade - Split X2 laptop 64-bit

Any solution to the Audio and Video issues on Split X2 laptop after Windows 10 FREE Upgrade?? I'm sure others are have the same Audio/video problems: - very slow, Repeating audio and video on YouTube and Netflix playback....totally unwatchable- speakers work fine- everything was working great on Windows 8.1 there must be some kind of driver upgrade for IDT High Definition CODEC BEATS audio... is there a work-around until the real problem is fixed? Regards - VK

I have downloaded and installed the HP recommended IDT Audio Driver using the HP Assistant. The current installed IDT High Definition Audio CODEC driver is: STWRT64.sys 6.10.6498.0 The laptop was rebooted but the problem still the same.....Audio is garbeled and impossible to understand the words...video seems ok when playing Youtube videos. My Split 13 X2 product id is: E2S66AV BIOS F.27

Touch screen issues after win 10 upgrade

Hello! I upgraded my Touchsmart 600 (http://support.hp.com/id-en/document/c02507415) to Windows 10. Everything works fine besides touch screen. It actually worked right after I installed new drivers for Graphic card, it worked really fine. After Shutdown or Restart, so after rebooting it stopped working. Now only works on login screen, strange. Whwn I log in, stops. I tried reinstalling Graphic drivers, just to see what happens, and my touch screen worked again. When I restart, again only on login screen. Awkward. Any help would be appreciated. Thanks in advance, Hrvoje.

Similar issues here with a Pavilion TS11. Touch screen works intermittently. Works fine immediately after booting, then randomly quits working. I started to think it was just a coincidence and a wire was loose or something was malfunction in the screen itself. It does randomly start to work again though. I hate it because so far I really like Win10.

Qosmio X300-13P - BIOS update

Good afternoon,
I have installed on the laptop OS Windows 7 64-bit (before was Winodws Vista 32-bit). Also I have decided to update BIOS, but on a site I have found updating BIOS only for Windows Vista 64-bit and nothing for new OS - Windows 7.
My question: whether it is possible to establish on Windows 7 64-bit BIOS-update from Vista 64-bit and whether it is safe?
Thanks.

Hello
> have found updating BIOS only for Windows Vista 64-bit and nothing for new OS - Windows 7.
This would only mean that BIOS update is pretested and designed for Vista 64bit. So this is the safe way to update the BIOS and I doubt it would be possible on Windows 7.
But as MasterG wrote, is this update necessary or just for fun? BIOS updates dont improve the performance, they only fix problems and if you dont have one, the update isnt necessary! ;)
Greets

Satellite L875D-S7332 sound issues on Win 10 upgrade

Hi all, I upgraded my Satellite L875D-S7332 laptop from Windows 8.1 to Windows 10 this weekend, and have been trying to troubleshoot a sound problem since. The sound appears to hitch intermittently (every 10-20 seconds or so) emitting a buzzing noise from the speakers. I tried updating to the most recent Realtek HD audio drivers and rolling back my Realtek drivers, both of which made no difference. When I revert back to Windows 8.1, everything sounds fine again. So I think it must have something to do with the sound card or driver's compatability with Windows 10, but I could be wrong. Windows update wants me to upgrade again, and I'd like to, but the sound's got to function right. Specs:Satellite L875DAMD A6-4400M APU with Radeon Graphics 2.7 GHzRAM: 6.00 GB I'd appreciate anyone's help, as I'm at a loss at the moment.

Wow - sound like you are having a bad time of it with the upgrade. If you have an AMD APU processor - which I assume you have, like A6, A8 etc. Usually AMD has integrated drivers for both the video and the audio of the computer. Have you gone to AMD's website with your specific APU (Integrated Processor and GPU) to see if they have updated drivers for Windows 10? Your laptop manufacturer, (I assume HP) should also have them, but HP seems to be asleep at the switch with this OS release. Check out the AMD site and do a search for your specific APU. There should be some integrated drivers for Windows 10 posted. Usually you just execute the .exe file and it installs everything. It would be worth a shot anyway before you revert back to Windows 8. And....yes you can easily roll back to your last Operating system. Here's a link to an article on how to do this: http://www.pcadvisor.co.uk/how-to/windows/how-downgrade-windows-10-to-windows-7-8-3615606/

Sound issues after win 10 upgrade

I upgraded to Windows 10 from Windows 8.1 yesterday (August 1, 2015). The update went smoothly. However, there is no sound on my computer. The sound icon in the tray has a red cross and says, "No speakers or head phones plugged in," when I hover the mouse on it. I have AMD Radeon sound card and I have updated the driver from AMD website. Despite all recommended fixes on various forums, including the Microsoft suggestions, there is still no sound. I don't have sound for any music or video. Appreciate any help. Thanks.

Wow - sound like you are having a bad time of it with the upgrade. If you have an AMD APU processor - which I assume you have, like A6, A8 etc. Usually AMD has integrated drivers for both the video and the audio of the computer. Have you gone to AMD's website with your specific APU (Integrated Processor and GPU) to see if they have updated drivers for Windows 10? Your laptop manufacturer, (I assume HP) should also have them, but HP seems to be asleep at the switch with this OS release. Check out the AMD site and do a search for your specific APU. There should be some integrated drivers for Windows 10 posted. Usually you just execute the .exe file and it installs everything. It would be worth a shot anyway before you revert back to Windows 8. And....yes you can easily roll back to your last Operating system. Here's a link to an article on how to do this: http://www.pcadvisor.co.uk/how-to/windows/how-downgrade-windows-10-to-windows-7-8-3615606/

Qosmio X300-15U - Product key for Windows 7 upgrade disk

Hello All,
firts post here :)
I have a Qosmio X300 15U, and just bought DVD upgrade for the OS: from Vista64 to Win 7 (home premium).
I got it by Toshiba Winodws 7 upgrade site.
I installed the upgrade and it's working fine, so far.
Only possible problem for the future, is that I cannot seem to find the Windows 7 product key label attached on the DVD paper case (probably lost it)
I have the DVD (for other serials, or so...)
Does anybody know if it's possible to make Toshiba support, send my old Windows 7 product Key or a new one (just in case of reinstall...)
It also appears that Microsoft has validated my install through their Tool (WGA, I think)
Do I need to revert to MS (paid) assistance, for such a (simple, to me) case?
Hope Not.
Thanks a lot.
Bye,
Diego

I don't know if Toshiba can send you a new productkey-label, you should call the helpdesk. But to find your productkey you need a key finder tool.
Try [this link|http://pcsupport.about.com/od/productkeysactivation/tp/topkeyfinder.htm] for a list of those programs.

Qosmio X300-V15 - Touchpad driver for Windows 7

Hey all
I've got a huge problem with my Toshiba Qosmio X300-V15?. I've upgraded to Windows 7 Professional from Windows Vista and now my touchpad aint working :(
I have download the necessary drivers, and stuff from the following site : [http://nordic.computers.toshiba-europe.com/innovation/dk/generic/SUPPORT_PORTAL/?]
But it aint working. At my Windows device manager it can find a P2 something mouse. So it can see that the mouse is "on".
Hope you can help me :)

Hey - Monsterg33k here. I cant get access to my "old" user anymore and I cant reset the password.7
Yes I have tried this but it dosent work, tho all the other keys work so I can "light-down" the screen and stuff. On another forum they told me see if I could see it in BIOS
I cant but in Windows I can see it

Qosmio X300 64 bit vista ultimate upgraded to windows 7 64 bit ultimate - issues

Hi there,
Hoping you can help me, any help would be greatly appreciated. I cannot find my laptop amongst the given models - first issue.
Second issue: given gratis CD voucher for upgrade to windows 7 ultimate with purchase of laptop, whihc i have redeemed and loaded to laptop. below are my laptop specs. And below that the consequent issues awaiting resolve PLEASE HELP!!!!!
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name SUZIQQOSMIO
System Manufacturer TOSHIBA
System Model Qosmio X300
System Type x64-based PC
Processor Intel(R) Core(TM)2 Extreme CPU Q9300 @ 2.53GHz, 2534 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date TOSHIBA V1.50, 23/12/2008
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume2
Locale Australia
Hardware Abstraction Layer Version = "6.1.7600.16385"
User Name SuziQQosmio\Suzanne
Time Zone Cen. Australia Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.75 GB
Available Physical Memory 2.10 GB
Total Virtual Memory 8.63 GB
Available Virtual Memory 6.48 GB
Page File Space 4.88 GB
Page File C:\pagefile.sys
Hi there,
Specs: as per Qosmio X 300. SSD 110GB, pentium core 4 extreme, 4 Gb RAM, plenty free storage on SSD (29GB), NVidia drivers with primary being GE Force 9800 M GTS, Direct X10. there is also a note down the bottom saying that if i have linked graphic cards (whihc i do i believe there are three), that i can expect better perfomrance with some software.
Ok I aplogise from the outset, i am a layman and not that techie. K. So the issue that I upgraded recently (last week) from vista ultimate 64 bit to windows 7 64 bit. ultimate. For the main, I am reasonably happy with the outcome in most areas - except gaming that is. I have increased speed and agility and the processor is now rated at 7.2. WEI. overall the laptop is rated at 5.8. however, getting back to teh reason for writing, I have nothing negative to say about windows 7 (as compared to its predecessor) apart from wishing to resolve my game crash issue. which usually occurs about 15 mins - 20 mins into a game and comes in the form of a shutdown ? BSOD from whence the laptop reboots when prompted at on/off and wants to know if to start normally or in various safe modes. I have noticed that the laptop does become very hot at the back (around the fans) prior to teh shutdown, and i am wondering if this is an overheating issue, and how to resolve if this is the case. the only other thing i have noticed that seems untoward is that i have apparently lost a wireless jump start driver from the upgrading process which i cannot find anywherre, and may be totally unrelated to this issue anyway.
All i want to do is play the games i could play on windows vista ultimate 64 bit. these include: Sims 3, sims 3 world adventures, sims 3 ambitions, highloft end stuff, and Bioshock. Oddly enough, i have played sid meyers civillisations revolutions IV (the latest one) with no crashes, and i havent tried ANNO 1404, but fear a similar fate may await this game as some of the others.
Addditional information:
everything is as i described it above, however the screen does not go blue but black,and the laptop shuts itself down, laptop acts as if hibernating mode? (these are guesses) or some mechanism geared at preventing over heating - the back becomes very hot. the machine can be rebooted from normal mode but comes up firstly with a screen suggesting that the laptop was incorrectly shutdown, and offers options as to safe mode, normal etc. i have been starting normally with no adverse effects. This is scenario one.
scenario two ends up similarly at teh reboot stage, but gets there differently. i play the game and the screen freezes, unable to move touchpad curser, unalbe to use ctrl alt del to get up task manager. end up having to crash to reboot.
I am quite frustrated and very reluctant to mess around with things that i dont understand (dont want to make the problem worse!). I am happy to attemtpt to follow your good explicit advice.
the only other negative thing i am expereinceing is screen flicker on internet. I have changed my power mode from high performance to balanced to try to nullify the overheating issue but i now am noticing this screen flicker which is irriating and appears on keystroke, or cursor movement.
Please note well: I am a layman, not a technician! Please explain in easy to (dummy) terms! Thanks!
kind regards
S
(Im Game)

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
-Griff W.

Qosmio F60 - No additional touchpad and Fn function after Win 8 upgrade

I recently installed Windows 8 on my Qosmio F60 and now I have some issues, I think it might be driver related but not sure which drivers in particular.
1. The touchpad still works for moving the pointer but swiping along the right edge doesn't scroll anymore, I have had a look on the drivers webpage but cant find which driver I need it install to make this work. Also does anyone know if there is a Windows 8 driver so that i can swipe the edge to bring up the charms and switch tabs?
2. The FN keys no longer work so i can't control the brightness or the other functions along the top row of the keyboard.
If anyone can help with either of these issues that would be great.
Thanks,
Phillip

Hi
As you can see there are no special Win 8 drivers fro the Qosmio F60 series.
Its not Win 8 supported.
However, I think you should be able to use the Win 8 upgrade drivers released for Qosmio F750.
Try it.
Recommend installing the touchpad driver (from Synaptics), the Toshiba Function Key Utility, Value Added Package and Toshiba System Driver

Qosmio x300-13r & Win 7

Hi, i have a question, I've bought this laptop in Russia few days ago, today I want to install Win 7 on it, but on the russian website of toshiba, in the category of downloading drivers for Win 7 OS, when I choose Qosmio series, there is no X300 models... Wat are they thinking about ?
can anybody help me with this ? where I can get Win 7 drivers for my x300-13r ?
Message was edited by: phpman

Hi,
3 days ago toshiba.ru has released drivers for Qosmio x300-13r, I've installed Windows 7, and also all the drivers that I could find on the russian website for this model of laptop (including Toshiba's Value Added Pack), but not all the features works correctly.
The FN button does not work at all - where I can find drivers for my keybord ? (but if I put my mouse on the top of the screen the panel of FN keys wil be visible)
Also does not work joystick (sorry for my english, I mean the panel, what make me possible to control Win Media Player when I'm not near my laptop)
Can anybody help me to find these drivers please?

Qosmio X300-14N - Vista 64bit recognize only 1789MB of RAM

Hello,
I need some help with my Qosmio x300-14N.
I'm using a vista 64 bit system and the OS only see 1789MB of ram.
I have 2x2gb memory module.
Please give me a solution!

Hi
How did you check this in Vista?
How much RAM is recognized in BIOS?
The notebook was equipped with 2 x 2GB RAM and therefore the hardware should be 4GB RAM capable.
The software (Vista 64bit) should recognize the full memory since 64bit OS has no 32bit limitation which would recognize only 3.2GB
In my opinion there could be something wrong with one of the RAM module this would explain why only one memory module has been recognized.

Upgrading the processor in Qosmio X300

Hello, I bought a Qosmio X300-01U from bestbuy in Canada about a year ago and i would like to know a few things about upgrading it.
1. Can i upgrade the processor from my old P7350 to a Quad core processor or a core 2 extreme processor that supports my motherboard(PM45)?
2. If i can upgrade it, do i need to install an additional fan (since there is an empty slot for another fan.)
3. Is there any additional hardware i need?
4. Would the performance boost be significant?
5. Finally, would this upgrade cause any problems?

Hi
I think nobody here can answer your question because here you can talk with normal people like you and me For such technical questions you should contact an authorized service provider.
But I dont understand why you want to upgrade the CPU I doubt that this will bring a strong performance boost.
In my opinion every Qosmio X300 is fast enough for all applications and I dont see a reason for making such a risky upgrade.

Qosmio X300-13P issues of Win 7 64bit upgrade

Similar Messages

Maybe you are looking for