Qosmio x300-13r & Win 7

Hi, i have a question, I've bought this laptop in Russia few days ago, today I want to install Win 7 on it, but on the russian website of toshiba, in the category of downloading drivers for Win 7 OS, when I choose Qosmio series, there is no X300 models... Wat are they thinking about ?
can anybody help me with this ? where I can get Win 7 drivers for my x300-13r ?
Message was edited by: phpman

Hi,
3 days ago toshiba.ru has released drivers for Qosmio x300-13r, I've installed Windows 7, and also all the drivers that I could find on the russian website for this model of laptop (including Toshiba's Value Added Pack), but not all the features works correctly.
The FN button does not work at all - where I can find drivers for my keybord ? (but if I put my mouse on the top of the screen the panel of FN keys wil be visible)
Also does not work joystick (sorry for my english, I mean the panel, what make me possible to control Win Media Player when I'm not near my laptop)
Can anybody help me to find these drivers please?

Similar Messages

Qosmio X300-13R - After few seconds the image darkens on webcam

We have laptop Toshiba Qosmio-X300-13R with the chamber built in webcamera. But there is a question.
I start the native utility or Skype, the first seconds all is visible, and then the image darkens and looks narrowly in the monitor that like it is visible my silhouette. If I apply different options, it does not occur. It is necessary to press the button to apply, the chamber again for 5-10 seconds shows brightly and is light. And then again on 95 % darkness... Deleted native driver, Windows Vista puts built in, and in Skype that does not vary. And with native drivers, in the utility (Camera Assistant Software for Toshiba) and in Skype.
What is such and how it to win?
P.S. On how many I have understood, the built in chamber of firm Chicony.

I had the same problem. . . fortunately I have a solution =)
After you've opened your webcam application like yahoo webcam and the screen goes black, what I do is I open the Toshiba camera assistant software utility and click properties
From there click backlit compensation and night mode. The screen would black out again after an hour or so, when that happens repeat the process, if the night mode is already checked, uncheck, and then check again then click ok when the screen comes to.
Hope this helps.

Qosmio X300-13P issues of Win 7 64bit upgrade

Hi,
I've upgraded X300-13P up to Win 7 Home Premium 64 bit.
Since the model somehow not in the Qosmio X300 models list (why???), I found all needed drivers (win7 64 bit, russian) using laptop s/n and drivers filter.
Now laptop works.
Issues (please, help to resolve some of it):
The Fn buttons don't work it was installed
TVAP vap-20100419162607.zip, 07/21/10
Company Toshiba
Type Value Added Package
Subtype (none)
Size (Kb) 71188
Ver 1.2.40
Language Universal
Country World Wide
Game Console launches only after deleting a driver "HID Miscosoft eHome transiver" or something like this.
Unfortunately, it is automatically created after reboot.
How to delete the "eHome" at all - I'm not sure if my laptop has the device?
It's impossible to register fingers - after I agree to save the scanned fingers software write "Such templates already exist..." and does nothing.
fp-sw-20091109111332.zip
11/09/09
Toshiba
Fingerprint Software
(none)
(Kb) 24529
1.0.2.12
Universal
World Wide
How to resolve?
I upgrade memory from 2x2Gb on 2x4Gb (bought in a Toshiba shop with a consultant - DDR3-1066M), but performance decreased - on Vista it was "5,4 Windows", now - "4,5 Windows".
The "bottleneck" - operations with numbers (sorry - I translate from russian: probably not accurately).
What should I do to increase?
Please, advise.

Hi *PauPau*,
thanks for the answer.
> > Since the model somehow not in the Qosmio X300 models list (why???),
> The X300-13P is listed on Toshiba European driver page.
>
You're right - I've found the place - my fault, sorry.
> > The Fn buttons don't work it was installed
> Install VAP and Flash Card Support Utility!
> I used the Flash Card Support Utility which is released for L500 series.
>
It's not clear: what does mean "L500 series" - soft, say, for the "Satellite L500-ST2521" is applicable for Qosmio X300? Any model???
And only Flash card for "L500", but native VAP for X300?
> >HID Miscosoft eHome transiver
> This might be the infrared controller which is needed for the usage of remote controller in Windows Media Center. You could disable this is device manager.
>
Unfortunately - the button "Disable" is disabled for the driver. :(
> >It's impossible to register fingers - after I agree to save the scanned fingers software write "Such templates already exist..." and does nothing.
>
> First of all you should delete all fingerprints. Then you should uninstall this software.
> Reboot the unit and clean the registry using CCleaner. Reboot once again and install the fingerprint again.
OK - I'll try.
Thanks a lot!

Qosmio X300-15U - Product key for Windows 7 upgrade disk

Hello All,
firts post here :)
I have a Qosmio X300 15U, and just bought DVD upgrade for the OS: from Vista64 to Win 7 (home premium).
I got it by Toshiba Winodws 7 upgrade site.
I installed the upgrade and it's working fine, so far.
Only possible problem for the future, is that I cannot seem to find the Windows 7 product key label attached on the DVD paper case (probably lost it)
I have the DVD (for other serials, or so...)
Does anybody know if it's possible to make Toshiba support, send my old Windows 7 product Key or a new one (just in case of reinstall...)
It also appears that Microsoft has validated my install through their Tool (WGA, I think)
Do I need to revert to MS (paid) assistance, for such a (simple, to me) case?
Hope Not.
Thanks a lot.
Bye,
Diego

I don't know if Toshiba can send you a new productkey-label, you should call the helpdesk. But to find your productkey you need a key finder tool.
Try [this link|http://pcsupport.about.com/od/productkeysactivation/tp/topkeyfinder.htm] for a list of those programs.

Qosmio X300-14V - Crashes while playing games

Hello ! I have some problems with my Toshiba Qosmio X300 14V. While I'm playing games installed on the computer it "crushes". The screen goes black and the speakers start buzzing.
I noticed that if i reinstall teh windows, driverers and directX it won't happen for some time. I also have to mention that it doesn't happen with ALL the games. It mostly happenst to games that require higher performance of teh computer; games like Just Cause 2, Neef For Speed Hot Pursuit, Fallout New Vegas. In one case it happened to a pretty old game, Shadows Ground Survivor.
If anyone can find any reasonable explination please help me. Thanks in advance.
P.S. About 4-5 months ago my HDD crushed, so I bought a new one and installed win 7. At that time I was using win vista home premium x32 with the drivers that were included in the recovery pack. Before the new HDD I had no problems with the computer. Apart from some occasionally crushing because of ovearheating because the venting channels were filled with dust.
Message was edited by: donrumata_1

Hi donrumata_1,
Maybe the notebook crashes due overheating?! Have you already tried to clean your notebook with compressed air spray?
This can blow out the dust from cooling ventilators and takes only few minutes. Furthermore its not necessary to disassemble the notebook so its very easy and not complicated.
=> [How to clean the cooling system of a Toshiba notebook|http://aps2.toshiba-tro.de/kb0/HTD7A01ZZ000AR01.htm]
From my own experience I can say its very useful and I do it every 3 months. So the notebook is much cooler and more silent because the fan doesnt run so often anymore.

Qosmio x300-14Y and Windows 7 - only 2 reproductors

Hi
I have problems with my Qosmio notebook after upgrade from Vista to Windows 7 64 bit.
The problem is that I can configure and only can hear 2 reproductors (Qosmio x300 14 Y has 4 + subwoofer which functioned well under Vista)
I tried to install drivers for soundcard from Toshiba website but with no success.
When I try to configure reproductors - then i can see only front left and right one.
I have additional 5+1 set witch I used back with Vista and now also listed only as 2 reproductors
Thanks all for answers.

i have made clean win 7 installation with c drive formatt, then windows 7 64 downloaded drivers - only drivers from nvidia have i downloaded manualy and off course sound drivers after problems.
the thing is that my 4+1 sound notebook is just 2 (stereo)

Qosmio X300 -123, Win7 and FN keys

Hi there
I come to you with some problems due to my new installation of Windows Seven (Win7).
I Have a qosmio X300-123 and since I have installed Windows7 my FN keys aren't working.
I've tried reinstall the Value Added Package pack and my problem is not fixed.
Do you have any drivers pack for windows 7?

Is there a release date for windows 7 specific toshiba drivers and the Qosmio 123 ?
I still have seen no information on the news.
on the "download drivers page" (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU)
if you select
Product type : notebook
Family : qosmio
Product series : qosmio X series
you can select "windows 7" in the operating system.
if you select "model : X300"
you can't ...
Wake up Toshiba !!! win 7 is up :)

Qosmio X300 -130 and Vista 64-bit - On screen Display doesn't work

Hi there,
I recently bought a Qosmio X300-130 notebook which shipped with Vista Home Premium.
The problem was that I could not get onto our domain at the office. So installed Vista Business 64-bit. I found all of the drivers online and everything works perfect except for my onscreen display (When changing the volume, contrast,etc). Can anyone please tell me what software or driver did I forget and where can I find it?
Regards

Hello
I really don't know what is wrong there but here is the Vista 64-bit installations order for your notebook model:
Windows Vista
Intel(R) Chipset Module V8.7.0.1007
Intel(R) Turbo Memory Driver(Intel iMSM Driver) V1.6.0.1034
nVidia Display Driver V175.80
Realtek Audio Driver V6.0.1.5608
Realtek Network Driver V6.205.403.2008
Alps Touch Pad Driver V7.102.302.101
Synaptics Touch Pad Driver V11.1.1.0
Jmicron CardBus Controler V1.00.13.03
TOSHIBA Software Modem V2.1.87(SM2187ALS04)
SliconLab Modem Driver V6.12.14.03
WLAN driver
Chicony Camera Software V1.7.193.0508
Bluetooth Stack for Windows by Toshiba V6.10.07.2T
CIR Port Driver V2.5.0.0
TOSHIBA Value Added Package V1.1.19_64
TOSHIBA Hardware Setup Utility V1.57.0.3C
TOSHIBA Supervisor Password V1.57.0.2C
Flash Cards Support Utility V1.57.0.2C
TOSHIBA SD Memory Utilities V1.9.1.9
Authentec AES1610 Fingerprint Utility V2.1.11.0
TOSHIBA ConfigFree V7.2.16
TOSHIBA WPS Library V1.0.0.7
TOSHIBA Assist V3.00.04
TOSHIBA Speech System V1.00.2515
TOSHIBA Extended Tiles for Windows Mobility Center V1.01
Dolby Control Center V1.1.0406
TOSHIBA Remote Control Manager V2.4.0.3
CD/DVD Drive Acoustic Silencer V3.01.03
TOSHIBA DVD PLAYER V1.31.11
TOSHIBA TRS Driver V4.1.2007.1115
HDMI Control Manager V1.7.0.5.64
TOSHBA Face Recognition(SmartFaceV) V2.0.2.64
So if you install your Vista and all Toshiba stuff following this installations order I believe everything should work properly.
If not I don't know what can be the problem. Maybe you then have just bad luck. ;)
Good luck!

Where are the Vista drivers for Qosmio X300

I have bought a qosmio x300 with q9000 quadcore and SLI 9800m gts
A nice notebook.
i have install on this notebook vista ultimate ( the notebook is sell with vista premium).
but, i don't have the drivers ...
ok, i search on toshiba web : usa, taiwan, australian, canada, french, europe, etc...
but i search all the drivers : toshiba hardware setup : all the version that we can find on toshiba web's site are wrong...
and a lot of drivers are same.....
so where can i find the drivers for my notebook ??

There are no good or bad drivers. Maybe you do something wrong.
The fact is that all drivers listed on Toshiba support page are absolutely the same as in recovery image. So there is no difference and all of them can be used on every Vista version.
By drivers, tools and utilities installation is important installations order. So please install and configure Vista following this installations order:
Windows Vista
Intel(R) Chipset Module
Intel(R) Turbo Memory Driver(Intel iMSM Driver)
nVidia Display Driver
Realtek Audio Driver
Realtek Network Driver
Alps Touch Pad Driver
Synaptics Touch Pad Driver
Jmicron CardBus Controler
TOSHIBA Software Modem
Modem Driver
Wireless LAN Driver
Chicony Camera Software
Bluetooth Stack for Windows by Toshiba
CIR Port Driver
TOSHIBA Value Added Package
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
Flash Cards Support Utility
TOSHIBA SD Memory Utilities
Authentec AES1610 Fingerprint Utility
TOSHIBA ConfigFree
TOSHIBA Assist
TOSHIBA Speech System
Dolby Control Center
TOSHIBA Remote Control Manager
CD/DVD Drive Acoustic Silencer
TOSHIBA TRS Driver
HDMI Control Manager
TOSHBA Face Recognition (SmartFaceV)
I hope this list will help you.

Qosmio X300 64 bit vista ultimate upgraded to windows 7 64 bit ultimate - issues

Hi there,
Hoping you can help me, any help would be greatly appreciated. I cannot find my laptop amongst the given models - first issue.
Second issue: given gratis CD voucher for upgrade to windows 7 ultimate with purchase of laptop, whihc i have redeemed and loaded to laptop. below are my laptop specs. And below that the consequent issues awaiting resolve PLEASE HELP!!!!!
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name SUZIQQOSMIO
System Manufacturer TOSHIBA
System Model Qosmio X300
System Type x64-based PC
Processor Intel(R) Core(TM)2 Extreme CPU Q9300 @ 2.53GHz, 2534 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date TOSHIBA V1.50, 23/12/2008
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume2
Locale Australia
Hardware Abstraction Layer Version = "6.1.7600.16385"
User Name SuziQQosmio\Suzanne
Time Zone Cen. Australia Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.75 GB
Available Physical Memory 2.10 GB
Total Virtual Memory 8.63 GB
Available Virtual Memory 6.48 GB
Page File Space 4.88 GB
Page File C:\pagefile.sys
Hi there,
Specs: as per Qosmio X 300. SSD 110GB, pentium core 4 extreme, 4 Gb RAM, plenty free storage on SSD (29GB), NVidia drivers with primary being GE Force 9800 M GTS, Direct X10. there is also a note down the bottom saying that if i have linked graphic cards (whihc i do i believe there are three), that i can expect better perfomrance with some software.
Ok I aplogise from the outset, i am a layman and not that techie. K. So the issue that I upgraded recently (last week) from vista ultimate 64 bit to windows 7 64 bit. ultimate. For the main, I am reasonably happy with the outcome in most areas - except gaming that is. I have increased speed and agility and the processor is now rated at 7.2. WEI. overall the laptop is rated at 5.8. however, getting back to teh reason for writing, I have nothing negative to say about windows 7 (as compared to its predecessor) apart from wishing to resolve my game crash issue. which usually occurs about 15 mins - 20 mins into a game and comes in the form of a shutdown ? BSOD from whence the laptop reboots when prompted at on/off and wants to know if to start normally or in various safe modes. I have noticed that the laptop does become very hot at the back (around the fans) prior to teh shutdown, and i am wondering if this is an overheating issue, and how to resolve if this is the case. the only other thing i have noticed that seems untoward is that i have apparently lost a wireless jump start driver from the upgrading process which i cannot find anywherre, and may be totally unrelated to this issue anyway.
All i want to do is play the games i could play on windows vista ultimate 64 bit. these include: Sims 3, sims 3 world adventures, sims 3 ambitions, highloft end stuff, and Bioshock. Oddly enough, i have played sid meyers civillisations revolutions IV (the latest one) with no crashes, and i havent tried ANNO 1404, but fear a similar fate may await this game as some of the others.
Addditional information:
everything is as i described it above, however the screen does not go blue but black,and the laptop shuts itself down, laptop acts as if hibernating mode? (these are guesses) or some mechanism geared at preventing over heating - the back becomes very hot. the machine can be rebooted from normal mode but comes up firstly with a screen suggesting that the laptop was incorrectly shutdown, and offers options as to safe mode, normal etc. i have been starting normally with no adverse effects. This is scenario one.
scenario two ends up similarly at teh reboot stage, but gets there differently. i play the game and the screen freezes, unable to move touchpad curser, unalbe to use ctrl alt del to get up task manager. end up having to crash to reboot.
I am quite frustrated and very reluctant to mess around with things that i dont understand (dont want to make the problem worse!). I am happy to attemtpt to follow your good explicit advice.
the only other negative thing i am expereinceing is screen flicker on internet. I have changed my power mode from high performance to balanced to try to nullify the overheating issue but i now am noticing this screen flicker which is irriating and appears on keystroke, or cursor movement.
Please note well: I am a layman, not a technician! Please explain in easy to (dummy) terms! Thanks!
kind regards
S
(Im Game)

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
-Griff W.

How-to: Installing Windows XP on Qosmio X300

Admins: please review this content, and make this topic sticky.
I decided to try out Windows XP on my Qosmio X300-130 laptop, that came with Windows Vista 32-bit pre-installed.
I bought XP Pro license + disc.
Part A: Installation
===============
1. Go to Intel website and download "Intel RST" drivers -- those are required to recognize the SATA disk. Unfortunately Qosmio X300 does not provide IDE emulation in it's BIOS.
2. Download "nLite"
3. Start "nLite" and choose option to slipstream the drivers, and choose to integrate Intel RST drivers, and create ISO. Burn the ISO on a CD-R.
4. The new CD disc should be installable on our hardware
Part B: Video
===========
Unfortunately, Toshiba modified GeForce used in the laptop, so standard NVIDIA drivers won't install on Windows. (they do install on Linux BTW)
PCI (and PCI express) code is made of several parts:
-VENDOR ID (NVIDIA, main vendor)
-DEVICE ID (chip used, GeForce 9700 GTS in my case)
-SUB SYSTEM ID (Toshiba, secondary vendor)
After you installed fresh XP, go to device manager, and see devices under yellow question mark. (devices that Windows can't recognize)
Click on VGA (it is our GeForce) --> Details --> Device instance ID.
You need to search original NVIDIA driver for your DEVICE ID (that is, so it matches the chip in your laptop exactly, DEV_062A for me).
I had to change one single file from original NVIDIA driver:
nvts.inf
%NVIDIA_DEV.062A.01% = Section004, PCI\VEN_10DE&DEV_062A&SUBSYS_00011179
-->
%NVIDIA_DEV.062A.01% = Section004, PCI\VEN_10DE&DEV_062A&SUBSYS_FF011179
Part C: Network & Audio
===================
You need few drivers:
-Intel WiFi 5100 drivers
-Realtek PCI-E Gigabit drivers
-Realtek HD Audio drivers
-Technologov, 19.01.2011

Very nice posting!
Thanks dude for this! I think it could be interesting for others!

How to use RAID 0 on Qosmio x300-11w?

Hi,
I have a Qosmio x300-11w with 2 320GB HDD and I would like to use them in RAID 0 for a bit more speed, I cant see any RAID options in BIOS. Is there another way to enable it?
My BIOS version up to date version 1-30 I think.
Anyone know if it is possible with this system?
Thanks in advance

Hello Teit
If notebook has such option it is described in users manuals but according to this document for your X300 (PQX32E) RAID is not available. Not a word about it is there.

[Qosmio X300] How to get MaxxAudio tab in realtek hd audio manager again?

First, sorry for my bad english, but I need your help =)
After I updated my audio driver (realtek hd audio) the MaxxAudio tab in the realtek window was lost...
To fix it, I have tried to "downdate" my driver, but I always can't see MaxxAudio.
I have also search solutions in Internet (Toshiba drivers page, forums, realtek.com...) I have found nothing.
As I had upgraded my computer to windows 7, I have tried to install an old version of this driver which was in the Toshiba Upgrade DVD, but no MaxxAudio tab in the realtek window...
And now, I have no Idea anymore, that's why I ask you.

http://www.otium-france.net/2009/10/30/astuce-trouver-et-installer-les-pilotes-windows-7-pour-le-qosmio-x300-de-toshiba/

Qosmio X300 - CORSAIR RAM is not working

Hello,
I own a Toshiba Qosmio x300-130 and in users manuall it is said it support max 2 x 4gb ddr 3 =8gb
So today my CORSAIR RAM ARRIVED !!! AND i was suprised they didnt work !!!!
Ima out of tricks what do u think the pr is ?
here is the part number
cmso4gx3m1a1333c9 i bought 2 x4gb :(

Yup...... here is my story and how it went :)
it looks like modules with 1066 mhz are rare these days and apparently....... the newe ones which are 1600 will not work under any circumstance.....
So today the shop refunded my money and i decide to go by car and search for modules which are DDR3 and 1066 mhz and after 1-2 hours driving i found a small repair shop where, when i entered and asked they said they have.. and apparently this shop is collecting all these old modules and reselling them for good profit since these modules are more expensive than newer ones...
Anyway we tried Kingston, Samsung, Adata and many other companies all of them worked i wanted to buy 2x4GB=8Gb the which according to manuall the laptop supports max 8GB RAM !!! but i was shocked after we loaded the modules 2x8GB = 16Gb again 1066mhz ola !!!!
The laptop botted up and in phoenix Bios it showed 16GB !!! i was shocked ....... So i ended up buying the 16GB and went home happilly ever after ;)
I hope RAM problem resolved

Qosmio X300-13G - Cannot connect to WLan router using N draft

Hi
I've bought a Qosmio X300-13g (the only one availabe on Portugal :/ ) and i've tried to connect it to a wirelles N network, but I always receive an error:
windows couldn't connect 'cause the defenitions of the router are different from yours...
Well do you know why? I've tried with several routers and it's always the same..
Tks
Regards

Hi
Yes, i've tried with a SMC WBR14S-N2 and now I'm using a Sitecom 300N (wl-183 / wl-541), I only receive the error when I choose the N mode, when I try the Mixed (G-N) it works (the computer connect with the G mode)
Thanks

Qosmio x300-13r & Win 7

Similar Messages

Maybe you are looking for