Qosmio x300-14Y and Windows 7 - only 2 reproductors

Hi
I have problems with my Qosmio notebook after upgrade from Vista to Windows 7 64 bit.
The problem is that I can configure and only can hear 2 reproductors (Qosmio x300 14 Y has 4 + subwoofer which functioned well under Vista)
I tried to install drivers for soundcard from Toshiba website but with no success.
When I try to configure reproductors - then i can see only front left and right one.
I have additional 5+1 set witch I used back with Vista and now also listed only as 2 reproductors
Thanks all for answers.

i have made clean win 7 installation with c drive formatt, then windows 7 64 downloaded drivers - only drivers from nvidia have i downloaded manualy and off course sound drivers after problems.
the thing is that my 4+1 sound notebook is just 2 (stereo)

Similar Messages

  • Re: Qosmio X300-14Y and Windows7 x64 Drivers

    Hello
    I just bought Windows7 x64 Ultimate and cant use it cos of driver problems.. If possible can admin support the drivers pls?

    Not yet :D im that much smart to check PQX32E on but thats why im asking there is no solution on win7 drivers for PQX32E
    now on i findout x300 series r similar to x305.. and i find drivers for them.. now im wondering if all the x305 drivers r same on models cos if u check the site (i checked all x305 series on http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2261847& rpn=PQX32U&modelFilter=X305-SP6828A&selCategory=3&selFamily=804517 and they all look same) but im not sure if the all drivers r same kind mybe im wrong.. any idea ?

  • Qosmio X300 -130 and Vista 64-bit - On screen Display doesn't work

    Hi there,
    I recently bought a Qosmio X300-130 notebook which shipped with Vista Home Premium.
    The problem was that I could not get onto our domain at the office. So installed Vista Business 64-bit. I found all of the drivers online and everything works perfect except for my onscreen display (When changing the volume, contrast,etc). Can anyone please tell me what software or driver did I forget and where can I find it?
    Regards

    Hello
    I really don't know what is wrong there but here is the Vista 64-bit installations order for your notebook model:
    Windows Vista
    Intel(R) Chipset Module V8.7.0.1007
    Intel(R) Turbo Memory Driver(Intel iMSM Driver) V1.6.0.1034
    nVidia Display Driver V175.80
    Realtek Audio Driver V6.0.1.5608
    Realtek Network Driver V6.205.403.2008
    Alps Touch Pad Driver V7.102.302.101
    Synaptics Touch Pad Driver V11.1.1.0
    Jmicron CardBus Controler V1.00.13.03
    TOSHIBA Software Modem V2.1.87(SM2187ALS04)
    SliconLab Modem Driver V6.12.14.03
    WLAN driver
    Chicony Camera Software V1.7.193.0508
    Bluetooth Stack for Windows by Toshiba V6.10.07.2T
    CIR Port Driver V2.5.0.0
    TOSHIBA Value Added Package V1.1.19_64
    TOSHIBA Hardware Setup Utility V1.57.0.3C
    TOSHIBA Supervisor Password V1.57.0.2C
    Flash Cards Support Utility V1.57.0.2C
    TOSHIBA SD Memory Utilities V1.9.1.9
    Authentec AES1610 Fingerprint Utility V2.1.11.0
    TOSHIBA ConfigFree V7.2.16
    TOSHIBA WPS Library V1.0.0.7
    TOSHIBA Assist V3.00.04
    TOSHIBA Speech System V1.00.2515
    TOSHIBA Extended Tiles for Windows Mobility Center V1.01
    Dolby Control Center V1.1.0406
    TOSHIBA Remote Control Manager V2.4.0.3
    CD/DVD Drive Acoustic Silencer V3.01.03
    TOSHIBA DVD PLAYER V1.31.11
    TOSHIBA TRS Driver V4.1.2007.1115
    HDMI Control Manager V1.7.0.5.64
    TOSHBA Face Recognition(SmartFaceV) V2.0.2.64
    So if you install your Vista and all Toshiba stuff following this installations order I believe everything should work properly.
    If not I don't know what can be the problem. Maybe you then have just bad luck. ;)
    Good luck!

  • Qosmio X300-12H and Universal adaptor

    Hi,
    Ref: PQX32E-02400LEN
    I ordered the laptop Qosmio X300-12H UK version but im living in Belgium so the adaptor could be a problem. But i saw this: AC adaptor input voltage : autosensing AC adapter (100/240 V) for worldwide usage. Does that mean i can use the laptop ANYWHERE without buying a new *** expensive adaptor?
    How can I know the tension, frequency of the computer?
    Thx

    >could be a problem
    In my opinion you should wait to see if the problem is there or not. If you don't want to use original adapter the best thing you can do is to order original one and you can buy it in Belgium.
    Ok maybe is more expensive as some cheaper universal but maybe you should use original parts with this nice and not so cheap notebook. in my opinion it is better to be on the safe side.
    On Toshiba support page I found info that Qosmio X300 needs PA3546E-1AC3 AC adapter.
    It is AC Adaptor - 19V DC, 9.5A, 180W.
    Bye

  • Qosmio X300-14X and 120 Hz display

    Hello.
    What kind of exit HDMI in Qosmio X300-14X v1.2 or v1.3 ?
    Can i connect 120 Hz display on this notebook ?
    sorry for my english.

    hi XPOM,
    clearing up some designations....
    - HDMI is NOT DVI (adapter is needed)
    - Hz (frequency) have nothing to do with your resolution (at first glance)
    - and the max. troughput is theoretical means that you almost never reach it (except you alter ALL of the shown pixels at a time)
    let have a look on your problem:
    - look what frequencies your graficcard can provide, i am sure more than 120hz
    - the max resolution is above the 1080p of full hd
    to the problem +released in 2006 year+ - sure every technology needs time to establish and you will pay for it
    even more as earlier you want it - how much have you paid for your machine...?
    you can use a 120hz monitor with your machine
    and if you exeed the max. throughput there will be shown so called artefacts (pixelblocks)
    i am sure this will not happen during a normal game/movie...
    and if it fails you can give it back... - so dont worry

  • Qosmio X300-14Y- How can I find the old BIOS version 1.90?

    Hi,
    First of all; I am so sorry for my bad english knowledge..
    Im from Turkey.
    I use x300 14 y since one week. factory bios version for vista 32 bit 1.90. But I upgraded to 2.10.
    How can I find old bios 1.90 setup file again. ? Please help.......

    You are right. On Toshiba download page you will not be able to find older BIOS version.
    When the new BIOS update is realised the old one will not be available for download.
    If you need older version contact nearest authorized service provider.
    They must have it. Be cool and talk with them. Maybe they can send it to you per mail.

  • X300, WWAN and Windows 7

    I have an X300 (6478-15G) bought originally with Vista. I re-built manually with W7 using my MS Partner licenses but that was not a roaring success as I had to scrape around to find various ThinkVantage add ons.
    Not entirely satisfied I decided to do a clean build using Lenovo recovery discs for the X300 (6478-15G) for W7 purchased from the US . Installation was a breeze, but the final build had no drivers for the WWAN card. 
    I've trawled high and low over the web trying different proffered solutions. Most of those leave bits of the device not installed/non-operational. Having dismantled the X300 I can confirm that I have a Sierra Wireless MC8775 mini PCI inside.
    Can someone please point me at the definitive W7 drivers for this combination? And any idea why the recovery CDs did not contain the drivers?
    Thanks in advance ....

    OK things I can think of to check:
    * IIRC the first time you power up the card using Fn-F5 it finishes the driver install. Is the card powered on?
    * You need the Power Manager Driver (but the Power Manager Utility is not essential) to power the card on, and Hotkeys for Fn-F5 to work.
    * Run System Update 4.0 - it may indicate what is missing.
    I don't work for Lenovo. I'm a crazy volunteer!

  • Qosmio X300-p8700 and IrDA problem

    Hello,
    I have a question about the built in IrDA of this laptop.
    I play left 4 dead 2 and fallout 3 a lot, but I'm not able to open my console in these games. I looked a bit on the internet and I find that IrDA is the problem. I enabled the console in both games and did what I found on the internet, nothing worked.
    Could someone explain how to disable it on Vista?
    Or is there something else that could cause this problem?

    Hi
    I dont play these games and therefore I cannot say anything about the issue with the console in such games
    But if you want to disable the infrared port then you can do this in BIOS.
    The second tab in BIOS contains the option called Internal CIR.
    Disable this and save the changes in BIOS.
    Then reboot the unit
    This will disable the internal infrared port

  • Qosmio X300-13L - Drivers for Windows 7 32bit

    Hello,
    Ihave several problems with my Qosmio X300-13I. Yesterday I installed a new Windows 7 home edition 32bit on it! The Installation runs without any problems!
    After several driver installations and updates, I have in the Device Manager one Unknown Device and my Remote Control and the "Shortcut Buttons" to start Media Center and Dolby doesn't work! On the Driver Hompage from Toshiba I didn't find a driver for Windows 7! I had tried the Windows Vista drivers also but it doesn't work! Only the light is now on, but no button works!
    Anybody has an idea or had the same problem?
    thanks for upcoming help
    Best regards from germany

    Hello
    I have Qosmio X300 too and have tried with clean Win7 installation but I didn't had enough time to bring it to the end but I can say that most important things were working well.
    Important is Installations order. Here is installations order for Vista but you can use it foe Win7 installation. Follow this list and if there is some missing Win7 driver or Toshiba tool install the same but designed for Vista. I hope this will work well.
    Windows 7
    Intel Chipset Module
    Intel Turbo Memory Driver
    nVidia Display Driver
    Realtek Audio Driver
    Realtek Network Driver
    Synaptics Touch Pad Driver
    Jmicron CardBus Controler
    TOSHIBA Software Modem
    SliconLab Modem Driver
    Modem Region Select Utility
    Wireless LAN Driver
    Chicony Camera Software
    Bluetooth Stack for Windows by Toshiba
    CIR Port Driver
    TOSHIBA Value Added Package
    TOSHIBA Hardware Setup Utility
    TOSHIBA Supervisor Password
    Flash Cards Support Utility
    TOSHIBA SD Memory Utilities
    Authentec AES1610 Fingerprint Utility
    TOSHIBA ConfigFree
    TOSHIBA WPS Library
    TOSHIBA Assist
    TOSHIBA Speech System
    TOSHIBA Extended Tiles for Windows Mobility Center
    Dolby Control Center
    TOSHIBA Remote Control Manager
    CD/DVD Drive Acoustic Silencer
    TOSHIBA TRS Driver
    HDMI Control Manager
    TOSHBA Face Recognition

  • Qosmio X300-15U - Product key for Windows 7 upgrade disk

    Hello All,
    firts post here :)
    I have a Qosmio X300 15U, and just bought DVD upgrade for the OS: from Vista64 to Win 7 (home premium).
    I got it by Toshiba Winodws 7 upgrade site.
    I installed the upgrade and it's working fine, so far.
    Only possible problem for the future, is that I cannot seem to find the Windows 7 product key label attached on the DVD paper case (probably lost it)
    I have the DVD (for other serials, or so...)
    Does anybody know if it's possible to make Toshiba support, send my old Windows 7 product Key or a new one (just in case of reinstall...)
    It also appears that Microsoft has validated my install through their Tool (WGA, I think)
    Do I need to revert to MS (paid) assistance, for such a (simple, to me) case?
    Hope Not.
    Thanks a lot.
    Bye,
    Diego

    I don't know if Toshiba can send you a new productkey-label, you should call the helpdesk. But to find your productkey you need a key finder tool.
    Try [this link|http://pcsupport.about.com/od/productkeysactivation/tp/topkeyfinder.htm] for a list of those programs.

  • Qosmio x300-15u: device manager shows 1x 9800M GTS and 1x 9400M

    Hi.
    I have a Qosmio x300-15u and i have noticed in device manager it only shows 1x 9800m gts and 1x 9400m!!!
    Is it right that i should have 2x 9800gts cards showing?
    The spec for this machine should have 2x 9800 cards sli (whatever that means) So a total of 1GB video ram.
    I'm sure im not getting the full performance of my laptop.
    When i go into nvidia control panel it does not say anything about sli.
    Btw; I am not running vista anymore.....
    i now run windows 7 ultimate 64.
    Please help me .
    Thanks

    Are you using the Display Drivers supplied by Toshiba on the Toshiba Website? Or are you using the nVidia supplied ones?

  • Qosmio X300 -123, Win7 and FN keys

    Hi there
    I come to you with some problems due to my new installation of Windows Seven (Win7).
    I Have a qosmio X300-123 and since I have installed Windows7 my FN keys aren't working.
    I've tried reinstall the Value Added Package pack and my problem is not fixed.
    Do you have any drivers pack for windows 7?

    Is there a release date for windows 7 specific toshiba drivers and the Qosmio 123 ?
    I still have seen no information on the news.
    on the "download drivers page" (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU)
    if you select
    Product type : notebook
    Family : qosmio
    Product series : qosmio X series
    you can select "windows 7" in the operating system.
    if you select "model : X300"
    you can't ...
    Wake up Toshiba !!! win 7 is up :)

  • Qosmio X300 - new nvidia graphic drivers are uninstallable: no nvidia chip

    hello,
    i have the qosmio X300-14P with windows 7..
    i play actual games (f.e. skyrim) which need the LATEST video driver!
    the x300 is said to have a nvidia geforce 9800M GTX video chip.
    however, when i download the latest driver (295.73 today), at installation it says :
    no nvidia hardware detected - unable to install !
    =====================================
    this is so with all nvidia drivers in the last 2 years (with windows 7 and windows vista alike) !
    what is the problem ?
    did toshiba not include an nvidia chip, but a cheap chinese noname chip, or what is the problem here ?
    whatever notebook i had before the toshiba, it would accept actual nvidia drivers.
    only the toshiba qosmio x300 doesnt.
    why ?
    it is vital that i install the latest drivers, how can i get by this problem ?
    the driver that toshiba offers for the qosmio x300 is almoust 3 years old (2009, now it is 2012!) -
    this is ridiculous!
    an actual video/graphics driver is urgently needed, it is vital that the nvidia drivers work.
    i ask toshiba :
    HOW can i get the latest nvidia driver to work in the qosmio x300-14P ?
    which is said to have a geforce 9800M GTX nvidia chip (though nvidia driver says : it does'nt).
    how can i get the latest `nvidia drive (295.73)r to work ?
    thank you
    q.

    thanks for the answers to all, especially blob.
    yes i am a gamer and therefore i need always the very latest graphics driver.
    (yes, skyrim runs, but not with highest settings of course).
    but i am about to buy a new notebook soon anyway.
    this branding is a problem i came across earlier with the toshiba ram already.
    that's the reason why this time i dont buy a new toshiba notebook anymore,
    i will switch to lenovo.
    i thought about the qosmio x770, as it has some nice features.
    but they removed firewire etc., well ok, i could maybe live with that,
    BUT i CANNOT live without an express card slot !
    the xpress card slot is vital, as only there you can expand your notebook.
    missing firewire could be corrected by a firewire express card, i always
    use e-sata hdd connections, so i have an express card with 2 esata ports
    (to have faster hdd writings). one internal esata port (even a combo port esata/usb2)
    is just not eno8gh for me, i have usually connected 2 or 3 external drives.
    as well i quite often use my express tv + video card.
    that a notebook at this price has no express card slot is unbelievable !
    this is a knockout feature for me.
    i can swallow a lot, but not a missing express card slot, as this is the only feature
    that makes it possible to expand a laptop (with a e-sata card, with a tv card, f.e.).
    and so i could switch my tvc card and my esata card and whatever else i need
    or might need later.
    i might have purchased the x770 had it an express card slot, but without
    it is so ridiculous that i would never buy it, no matter how good the other features are.
    an express card slot is VITAL for every notebook.
    that someone could spare it it like selling a rain jacket without a zip.
    too bad, because else the x770 is not so bad.
    i wonder what made them cut the express card out in a notebook
    (that is not expand-friendly anyway).
    i saw that some others companies did it as well.
    this will not be a fortune, as i foresee that many people will, if not at once, then later
    hate the missing express card slot.
    it was about time that they put good graphic cards in notebooks (while once they are branded,
    they are a hassle, good or not), and now they start cutting the vital express card slot.
    unexpandable is the first that comes to my mind when i think about the x770.
    the product designers at toshiba seem not to be very good.
    branding, missing express card slots - what else may we have to expect in the future ?
    i was about time to switch.

  • Monitor Out - Qosmio X300-12S

    I have a Qosmio X300-12S and I want to use my monitor out and use it into my TV.
    I don't have an HDMI TV, so can't use that output.
    I have bought a Monitor out to Composite/Scart but can't get it to work. I have tried going into the NVidia Control Panel and forcing rigorous detection, but with no luck.
    Can anyone give me any clues?
    Thanks!

    Hi,
    Thanks for your replies - my laptop only has a DVI / Monitor Out and a HDMI out.
    Not sure what you mean by enabling the right port on my TV. I have plugged the composite cable into the sockets, and I tried a S-Video cable, but had no luck with either of them.
    I don't really want to buy a HDTV so that I can watch things (although I'd like one, just don't want to pay for it!!!), but I feel like I'm having less choice as the time ticks on.
    Thanks again...

  • Qosmio X300-14P: Will Sound 5.1 Headset - Razer Baracuda work?

    Hello fellas,
    I just bought that Qosmio X300-14P and would like to buy a new headset right now.
    Actually it's gonna be that Razer Baracuda Hp-1 which is a 5.1 headset.
    Will it work?
    I haven't found any serious information about that sound-platine which is implemented.
    I would be grateful for a very fast answer.
    Yours Faithfully
    KjubE

    Hi, no it cant be done, the reason being 5.1 surround headphones have 3 connectors ussually, 1 for subwoofer, 1 for rear and 1 for front. We only have 1 connector on the laptop.
    However, there are a few companies that make special units for this, one of them being creative labs.
    Hope this helped

Maybe you are looking for

  • LMS 3.1 processes unable to start

    Hi! I have had LMS 3.1 installed for more than one year - and it has been working as expected. After a reboot of the server (Windows 2003 R2) the solution stops working. When browsing the syslog.log file i see messages like: Apr 20 08:28:28 127.0.0.1

  • Had to remove my battery in order to boot my Satellite A200

    My Toshiba Satellite A200 laptop after allmost 4 years of usage at shutdown remained with the "Power on led" lit on the systray and refused to boot when I hold pressed the Power Button. When the Batttery was removed and I tried to boot with AC Power

  • Where do I find a template to create address labels (3 columns by 10 rows?

    Header 1 Header 2 Header 3

  • OC4J error during shutdown....

    Hi everybody, i get an error message when i shutdown my oc4j standalone server, hope someone could help me figure this out. "11/10/2005 10:21:43 AM org.apache.struts.action.ActionServlet destroyModules GRAVE: javax.servlet.UnavailableException: Canno

  • Accessing dataprovider from mxml component.

    Hi, I have a dataprovider and would like to access the data from mxml component. Basically I have Actionscript: Bindable] private  var dp:ArrayCollection; private   function dp_handler(e:ResultEvent):void dp = e.result as ArrayCollection;  I wanted t