Qosmio X300-16D - thermal pad/paste solution for CPU and Nvidia MCP

Can anyone suggest a good (specific) thermal solution for the Qosmio X300-16D CPU and Nvidia MCP?
I ask because there is a slight complication with the 16D (an SLI setup)... the heatsink for the CPU and Nvidia MCP are connected in the same thermal module, but while the CPU heatsink is screwed down, the Nvidia MCP chip is not - so there is a large gap between that chip and the heatsink.
I'm guessing some form of thermal pad should be used here rather than grease/paste? Does anybody know what thermal pad has been used by Toshiba for this, or point me to a high quality replacement that is suitable to be used?
Thanks,
Chris

Hi
As far as I know the thermal grease 776 (part num: K000055600) could be used.
But there are different cooling pends as mentioned by Akuma.
There is an thermal fan 1 for DUAL-VGA (K000061940) and thermal fan 2 for dual VGA (K000061950) as well.
I assume both are for SLI configuration.
There are also some other cooling modules for VGA (VGA THERMAL MODULE-1-GT-NB9E K000065560 and VGA THERMAL MODULE-2-NB9E-W/O TMA K000065560)
You can google for these part numbers Found all in internet

Similar Messages

  • Unbelievable no solution for FMS3 and FLVPlayback???

    I've spent the past 2 days scouring Google and dozens (easily over 100) websites
    trying to find an answer to something that people do every day!
    I am absolutely shocked that this info is not available anywhere online.
    A simple FMS3 and AS3 and RTMP and FLVPlayback example....
    totaly not simple and not possible to find!!
    I try every possible combination:
    import fl.video.*;
    VideoPlayer.iNCManagerClass = fl.video.NCManagerNative;
    myVideo.autoPlay = true;
    myVideo.isLive = true;
    myVideo.isLive = false;
    myVideo.source = "rtmp://localhost/appName/videos/flvName.flv";
    myVideo.source = "rtmp://localhost/appName/streams/flvName.flv";
    myVideo.source = "rtmp://localhost/appName/streams/videos/flvName.flv";
    myVideo.source = "rtmp://localhost/appName/flvName.flv";
    none is working!!
    i did not find any working simple solution for:
    FMS3 and AS3 and RTMP and FLVPlayback
    anywere on the web
    only for:
    FMS3 and AS3 and RTMP and Video and NetStream
    if someone could bring "salvation" to this required important issue
    i will be so thankfull
    cheinan

    Janaki L thanks a lot for your replay
    i think i know where the problam come from
    its from point number 8 in your raplay:
    8. Make sure you have a publisher connected to your 'server' using the 'appname'
    and streaming a live stream with the name 'streamname'
    I thought i do not need a publisher to be connected to my appname in my server.
    i thought FLVPlayback is doing the netConnection and start streaming the flv
    that are already published and sitting on the server.
    Is it not possible for the user that use swf with the FLVPlayback to make a netConnection
    by ac3 code or some other wey and the FLVPlayback will use that connection to play the flv for that user
    without third party connected publisher?
    If not - maybe i can use HTTP to let the FLVPlayback play the flv for the user
    but that bring me to other problem:
    my localhost is at:
    C:\inetpub\wwwroot\
    the flv is at:
    C:\Program Files (x86)\Adobe\Flash Media Server 3.5\applications\appName\streams\videos\flvName.flv
    what will be the http url for the flv?

  • I wonder to know what is the enterprise solution for windows and application event log management and analyzer

    Hi
    I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
    I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
    I Want to know the point of view of Microsoft expert and give me their experience and solutions.
    thanks in advance.

    Consider MS System Center 2012.
    Rgds

  • Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas

    Hello Experts,
    Pl advise if we have Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas.?
    Any link or material for reading, please let me know.
    Background - We are working on the scope to finalise processes for Small And Medium Co's for Downstream business in ECC 6.0.
    Also advise how many and what kind of processes are involved related to P2P, Order to Cash and Finance.
    Regards
    Vinod Chincholkar

    Hi Vinod,
    i hope you can find the details in this link,
    you can download the sloution overview brochure...
    http://www.sap.com/industries/oil-gas/small/index.epx.
    Best Regards
    Satish

  • Annoture - Metadata Bridging Solution for Aperture and iView

    Aperture and iView users:
    I just released Annoture, a metadata bridging solution for Aperture and iView MediaPro! With Annoture, you’re just a click away from sharing metadata between these two popular image management and cataloguing applications. Spend more time working with your decisive moments than worrying about double-entry and incomplete metadata!
    Annoture lets you transfer annotations from iView MediaPro catalogs to Aperture projects and albums and back. This two-way transfer of IPTC and metadata information means you are not tied to any one application for your image management and workflow needs. Annoture also features a modular interface that can be extended to support additional applications in the future.
    http://www.tow.com/software/annoture/
    Users of Aperture and iView can download a fully-functional version of Annoture. The unregistered version will occasionally display a reminder to register, and all images processed in Aperture by Annoture will have a custom “Annotated with Annoture!” tag added. You can remove these items with the full version after purchasing and entering your license code.
    Enjoy!
    -adam

    Congratulations on getting this working and available so quickly! I bet many late nights went into this
    It's definitely providing some motivation for me to learn more Applescript...

  • How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance. Of a sledgehammer, open the device and attempt to recover your files by force!???

    How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance in Brasil. Of a sledgehammer, open the device and attempt to recover your files by force!???

    Heat up the bottom rubber mat with a hairdryer for 5-10 minutes to loosen the adhesive, then pull the rubber mat away from the bottom metal plate carefully.
    Then use a screwdriver to remove the 10-12 screws to open up the case.

  • Local Director SNMP for CPU and Memory

    Is there any way to get the CPU and memory utilization from a Local Director using SNMP? When I do an SNMP walk, I don't see any objects for CPU and memory.
    Thank you

    There's a "Show cpu " commmand availabe. Type help or '?' for a list of available commands.

  • Email alerts for CPU and Memory status of CUCM

    Hi All,
    can anybody help me here?
    Will RTMT trigger the daily email notification for CPU and Memory status of CUCM? If yes, kindly let me know the procedure.
    Thanks in advance !!!!

    Hi Hariharan,
    In addition to Atul's link please refer the below mentioned link CPU and Memory usage
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/managed_services/cucm_health.html#wp1101115
    Tx,
    Hope this helps
    Shalu

  • SNMP OID for CPU and Memory Utilization on a MDS 9509

    Does anyone know what the OIDs are for CPU and Memory utilization on a MDS 9509?
    Thanks

    CISCO-SYSTEM-EXT-MIB.my is a good place to start and you can determine the OID from the MIB.
    Once you feel as though you are on the right track, have a look at:
    http://www.oidview.com/mibs/9/CISCO-SYSTEM-EXT-MIB.html
    I gather that what you need is:
    1.3.6.1.4.1.9.9.305.1.1.1
    and
    1.3.6.1.4.1.9.9.305.1.1.2
    Enjoy.
    Stephen

  • OID for CPU and MEMORY utilization for wrv4400n

    Hi,
    Can any one please tell me the OID for CPU and MEMORY utilization for wrv4400n?
    Thanks
    Vipin

    CISCO-SYSTEM-EXT-MIB.my is a good place to start and you can determine the OID from the MIB.
    Once you feel as though you are on the right track, have a look at:
    http://www.oidview.com/mibs/9/CISCO-SYSTEM-EXT-MIB.html
    I gather that what you need is:
    1.3.6.1.4.1.9.9.305.1.1.1
    and
    1.3.6.1.4.1.9.9.305.1.1.2
    Enjoy.
    Stephen

  • Qosmio x300-15u: device manager shows 1x 9800M GTS and 1x 9400M

    Hi.
    I have a Qosmio x300-15u and i have noticed in device manager it only shows 1x 9800m gts and 1x 9400m!!!
    Is it right that i should have 2x 9800gts cards showing?
    The spec for this machine should have 2x 9800 cards sli (whatever that means) So a total of 1GB video ram.
    I'm sure im not getting the full performance of my laptop.
    When i go into nvidia control panel it does not say anything about sli.
    Btw; I am not running vista anymore.....
    i now run windows 7 ultimate 64.
    Please help me .
    Thanks

    Are you using the Display Drivers supplied by Toshiba on the Toshiba Website? Or are you using the nVidia supplied ones?

  • Pls help putting together the BEST SOLUTION for PP and AE CS4

    Hi guys
    I was tasked to put together the best machine (machines) for video editing / rendering .. money is not an issue.
    My client is a TV broadcasting network and they do lots of videos everyday .. They want to render their work as FAST as possible because sometimes they have tight deadlines and rendering and re rendering (if there are mistakes) has cost them .. so now they're serious about getting the best technology to achieve best rendering time possible, but in a bit of practical sense of course.. i mean there's no sense spending 1000USD or more for a piece of technology that offers under 10 second faster rendering only ..
    What they do and want
    - edit/put together/ sequence lots of videos constantly, under premiere cs3 (will upgrade to cs4 on the new machine)
    - use affter effects for some effects and 3D stuffs.. but not that much.. but increasingly as time goes by and their video editors get more affter effects training..
    - needs really really fast rendering!! Right now it takes them typically 1-2 hours to render stuffs, and what to cut this time by half or more..
    Existing Setups on work stations:
    Intel QuadCore (Q6600, i7, Q9550, Xeon x3220, and the likes)
    4GB RAM DDR2 1066mhz
    Highend motherboards
    GeForce 9500GT , 9800GT, and GTX 260 216sp
    GSKILL Falcon 64GB SSD Drive as primary
    1TB Western Digital BLACK edition drives for storage
    Software:
    Windows XP 32 bit
    Adobe Premiere Pro CS3 (80% of all their work done here)
    AE CS3
    etc..
    Running NOD32 Antivirus
    I am an somewhat of an expert in Hardware and stuff, i build custom PC's machines most of my life but i have limiited knowledge on optimizing hardware for VIDEO EDITING stuffs.. so i turn to you all.
    I do understand that w/ video editing CPU is the most important, followed by RAM, and ofcourse by HDD for disc caches and stuff.. and where videocard may come to an advantage as well. and normally i'd suggest the fastest components available . i7 , extreme processors, skulltrail dual quad setups perhaps? RAID 0 SSD Drive? etc.. but I do not know w/c gives the most advantage, and w/c is a waste of money..
    I also read about quadro cards offering really big performance improvements using CUDA tech etc..
    again im not the expert at this type of requirment.. so i need your advises..
    with unlimitted PRACTICAL budget given to me to come up w/ a solution I initially thought a rendering farm would be the solution, but upon reading around it seems there's no rendering farm solution for PP CS4.. just the adobe after effects part.. so i had to go back to the drawing board and suggest really powerful work stations instead..and perhaps have them migrate to 64bit OS for that "extra" performance.. i myself am on win7 64bit and it's looking mighty good.
    1) is this the right move?
    2) is it still worth it to put together rendering farm for AE renders only? or might as well concentrate funds on the machines/workstations?
    Also along the PRACTICALITY LINE, would it be practical to maintain all the existing machines, and instead build a manned RENDERING MACHINE w/ PP and AE (basically desktop or Server if they are faster at rendering w/ the best specs for the purpose etc) where they can just throw the workload to some guy there for rendering? Atleast the editors can continue using the workstations while the rendering machine guy is at work? and even perhaps setup a gigabit lan network where the RENDERING MACHINES can dynamically pull the work load via the network , not needing to transfer the files to the rendering machine first ? etc
    as you can see im not only looking for the best machine, but the best STRATEGY for my client.
    Good suggestions would be much appreciated.
    regards to all

    in a nut shell no. if you do not have to "Share" then Avid is pointless Adobe is a far better answer.
    Avid solutions still need a computer. The Mojo.Nitris are a joke and Avid no longer provides computers even the Symphany comes with your choice of Apple Mac Pro or HP 800. (Dual Xeon)
    there are better "hardware" answers that what Avid sells for Adobe. Decklink, Aja to name a few.
    if you have to share then you have no choice. this is the one area Abode does not lead.
    renders have to do primarily with 2 things CPU power (Xeon will render faster than single i7)
    and Drives. the faster your drive set up the faster the render. Memory does play a part and so does the video card depending on what codec and to what
    it also depends on WHAT you are rendering and from what for the HDDs.
    without knowing your work flow format and codec its impossible to suggest something.
    in terms of rendering
    Core i7
    Dual Xeon (faster unless still doing DV/HDV thru firewire)
    Sonnet raid array
    Scott
    ADK

  • Temporary solution for PSDs and Illustrator 64 bit

    I found a temporary solution to the problem of placing or opening PSDs on 64bit computers in Illustrator CS3 and CS4.
    Right click the icon for Illustrator and select Properties /
    Compatibility
    Then select Run this program in compatibility mode for
    Windows XP (Service Pack 2)
    It doesn't affect the other programs - only temporarily changes the screen for Illustrator only.
    I can now open and place layered PSDs directly into Illustrator again.
    (Original reference http://radongas.blogspot.com/2008/09/adobe-illustrator-cs3-windows-vista-64.html )

    Ryan Dinan, "Importing Photoshop files into Illustrator CS3" #27, 22 Oct 2007 7:00 pm

  • Best HW solution for Avid and FCP

    Hi there,
    I have a MacPro system running both FCP and Avid. I'm currently using a Mojo to monitor from Avid and just using my DSR-25 to monitor output from FCP. However, it's a little annoying having to disconnect or change wires every time I want to use a different system.
    Does anyone know of any hardware that would provide monitoring for both systems that would also connect up to a DVCam based deck at the same time? I currently use a DAC-10 at work but it seems to have problems when a deck is connected to it. Or am I best to stick with the Mojo and get a PCI-E based solution for FCP? Many thanks!

    Don't think there's a fix for you here... the codecs used by Avid and those used by FCP aren't the same so all hardware made for the systems is unique to the systems they are intended for. I'd suggest you get off the fence and go one way or the other and stay there...
    Look at AJA products for the best in FCP monitoring solutions. You can't have two FW devices connected at the same time either. i.e. the DAC and a FW deck... the OS doesn't deal with more than one at a time.
    Jerry

  • Seeking solution for css and js making client very heavy around  800KB

    I have developed GUI using web dynpro,
    deployed the application in enterprise portal,
    when i save the web page in local machine from browser(IE),
    the HTML + css+ js file size comes around 700-800KB.
    How can i reduce this so that i can use it in internet.
    For internet application noone can afford more than 40 KB in client, Please any solution to the above problem ASAP

    Dear jian
    The css and js are around 500 KB.
    These files get downloaded only when the request is for the first time.
    So first time hit will be time taking but from the next time it will be fast.
    If u can check and tell the file sizes of css and js of your application, then i can compare with mine.
    But generally web applications should be very light in size.so , should i go for struts and can u give me the
    advantages and disadvantages of web dynpro against struts.
    Web dynpro pages are rendered in client browser ? and which framework does it follow ? is it ajax or ?????

Maybe you are looking for