Qosmio X300 - Can't write disk after firmware update

I have a serious proble. After a firmware-update for my pioneer dvd-drive I can't write anything anymore on disks.
I really need some help there

I just received my new drive and installed it on my Qosmio x300 13E.
It is a LG GBW-T10N drive and it works perfectly. The included software allows me in combination with the newest driver for the nvidia gforce x9800 graphic controller to upscale films to a full HD resolution.
It is absolutely amazing. I just had to try it with a normal dvd and I had a full HD entertainment on my flat screen tv.
The replacement of the broken drive was easy. You simply need to loosen one screw on the bottom of the notebook and then you simply pill it out.
If anyone wants to do it too, I can give accurate advice for it.

Similar Messages

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

M5035MFP displays Permanent Storage Write Failed after firmware update to 48.301.7

After updating the firmware to 48.301.7, I have two M5035MFP machines that are displaying "68 Permanent Storage Write Failed" error messages. The users can press Continue and printing will proceed normally for another 10-50 pages when the message will appear again. The NVRAM and HDD have been reset/intiliased and they have been powered off/on several times.
This is also occurring on two other different models (6040MFP/9040MFP) which also started showing up after a firmware update about the same time.
Could this be a failed update? How would I go about downgrading to a previous firmware version?

Hi Rwelper,
I want to share with you this solution:
Please try first to reseat the Formatter/HDD and the memory DIMM and install the correcly then try:
First it is not adviced to downgrade the firmware at this step, you can try a cold reset and upgrade firmware again.
here, you need to remove the existent Firmware file on your PC and try to download it again from the HP Website, thus you can instaltly disable the firewalls and the antivirus and do this action.
NOTE: You can try a new upgrade firmware before you proceed with the Cold reset* of the printer.
Cold reset (Format disk also can be performed if this don't work): You can check the printer's manual to know how to perform it.
Please try an NVRAM init or Super NVRAM Init if this don't give a solution.
All these manipulations you can find in the printer's manual
Please note also that all these manipulations will delete all the current printer's configuration if it going to be working fine, so you will need to upgrade firmware and set your printer up again.
==> There is a need to delete files on the HDD / data on the DIMM, unplug and restart the printer.
The final solution is to replace the Formatter then the HDD if all these solutions don't bring a result.
Soudani
I work for HP
I hope this solution respond to what you need
You can post a like if you like this answer

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

Ovi Maps 3 don´t start after firmware update (6220...

Hello!
a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
But Nokia Map Updater says, there are no updates for my maps.
What´s wrong?
Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
thanks

Hello!
The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
But in the meantime I have found a solution!!
I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
thanks
sorry for my bad English

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

I can't launch Mail after i update the OS to X Yosemite

I can't launch Mail after i update the OS to X Yosemite.

can't open mail after installing yosemite

Can't steam video after latest update on my I pad mini!

Can't steam video after last update on I pad mini . Video loads very slow and keeps dropping out it was fine before the update!!!

If it's showing a different Apple ID, you need to either update them from that Apple ID or delete and redownload them when signed into a different one, which may require repurchasing paid applications.
(109113)

I can not login Flickrs, after I update IOS 8.0.2 ?

I can not login Flickrs, after I update iOS 8.0.2 ?

I tried hard reset by press both power and home button.
I can not hear music played through the speaker. Just music only.
The speaker workes well with imcomming call or out going call by turn on loud speaker.
Linh.

HT5622 Why can't I purchase after I update my payment detail?

Why can't I purchase after I update my payment detail?

My first suggestion would be to double check and make sure that the changes were saved in the payment information area of your account, to back and check to be sure.
Settings>iTunes and App Stores>Apple ID> Tap your ID. Then Tap View Apple ID. Enter your password and go to Payment Information and check. Check the expiration date, biling address, security code, etc. and then save your changes.
If everything is done successfully, you will get an email from Apple notifying you that they received changes to your account and if these changes were not made by you... Etc, etc. When you get that email, you know that the changes have been confirmed.

Guest Network reappeared after firmware update- Can't delete it.

I'm running a wireless network from my 1 TB TimeCapsule, with Firmware 7.6.3, which was updated today. I'm not sure the firmware version previously. Before a move to a new state, I'd previously run a guest network. When I got new internet service here after the move, the telephone company supplied a wireless modem, on which I turned off its wireless mode, and shared its internet to the Time Capsule via ethernet (on the TC: Connection Sharing = off - Bridge Mode). And Airport Utility no longer let me have the ability to set up a guest network.
I came to understand that is typical, and actually was persuaded this was better (not splitting bandwidth, etc) per this discussion and others: https://discussions.apple.com/message/18673654#18673654.
Now, today, after this firmware update, suddenly my previous guest network has reappeared, with the same security key that I'd programmed into it in another state. However, I'm not able to do anything about it!! There's no access to it via Airport Utility! I think I'd like to turn off the guest network. But I'm intrigued by the possibility of having the ability to turn it on again.
Any ideas?

As I'm trying to scan a few threads (with time I don't really have),
ex: https://discussions.apple.com/thread/4785878?tstart=0
it looks like this firmware was to support a higher version of Airport Utility (6.1), explicitly with extended guest network support. I'm guessing my problem, with an older version of Airport Utility, is one of those unexpected collateral damage issues. A way to go back in firmware is mentioned on the 2nd page of that thread:
Briolet
Re: airport firmware 7.6.3
Feb 8, 2013 6:47 AM (in response to Neil Atkinson)
About downgrading the firmware. On Airport Utility v5.6 it is simple. I am at the moment on 2 Snow leopard computers.
In the menu of the utility, choose "load Firmware..." thats all. It seems only to know the previous used firmwares. I skipped 7.6.2 and that is also not available. Also, on my newer Snow leopard computer I only can choose between 7.6.1 and 7.6.3, while on my other Snow leopard computer I also can in addition choose 7.6 and 7.5.2 versions. Apparently they are stored in the libraries of the local computer.
There is an other option to load other firmware, but than you get a dialog were to look for it.
Would you recommend this?

Can't install OS 9 on CRT iMac after firmware update

This is a bit long winded, sorry!
I bought a "working" 2001 iMac, 500MHz, slot-loader, 20 gig HD, CDRW off eBay (the CDRW didn't!) that ran in OS 9. With an external CDRW it worked well, booting the OS discs fine.
The previous owner had left his details on a supposedly deleted OS X account, so I decided to do a clean install to remove them with a supplied disc. I noticed in Utilities that a firmware update was available, 4.1.7, so used it, then did a clean OS 10 install, remembering to install the OS 9 drivers too. I bet you can guess what's coming!- yes, the OE discs wouldn't load OS 9.
Having read postings on this forum (thanks, guys!) I bought a retail version of 9.1 to use, the white/gold one with Sherlock, but this won't load either.
The main problem facing me now is that I can't update to a proper OSX without updating the firmware to 4.1.9, for which I need OS 9 installing!!! (I'd quite like OS 9 back too!)
I've reset the PRAM,and even wiped & reformatted the HD and reinstalled the 9 drivers again using the OSX disc and then powering down (you're not meant to, I know!) and still I couldn't load 9 up, trying both ways to load, just getting the "question mark on floppy" symbol.
Any help, please? Haven't tried target disc mode transfer yet, but could get another machine to do it.
Thanks for your patience with this matter, Mark Mac.

I had a similar problem once (I'll spare you the details!) and what I did in the end was this:
1. Take the hard drive out of the iMac and put it in a FireWire enclosure.
2. Erase it and put OS9 on it down the wire from another working Mac. You don't necessarily have to use the installer CD; you can just copy the OS9 system across from another Mac and it will work as a valid system.
3. If you don't think it installed properly (as mine hadn't) put the installer for the firmware update into the startup items folder of the OS9 installation.
4. Put the HDD back into the iMac and reassemble.
5. Turn it on, whereupon it should automatically start the firmware update, running natively in OS9. Delete the firmware update installer from Startup Items.
6. Update to 9.1 if not already, as that is the minimum for installing OSX
7. Restart in 9.1, introduce OSX install discs and begin installation.
I know all this sounds a faff, but it worked for me and is quite logical if you think about it - not much can go wrong as long as you don't wreck the iMac while taking it to bits. One extra tip: don't install anything later than Panther on an iMac G3, because it won't be happy. And even with Panther, you might want to consider installing using XPostFacto (see versiontracker) which helps older Macs cope.
Good luck - let us know how you get on.
N

Can't connect to Airport after firmware update

Ever since I updated the firmware on my Airport I can't connect to it any more. I'm pretty sure I installed everything properly and reset the Airport several times but still no luck in connecting to it. Any suggestions?

DomPoggi wrote:The Airport Utility said firmware on each Airport Express needs to be updated, so I did it.
Dom
Firmware updates on the Express sometimes results in scrumbled settings.
Check that WiFi is disabled on your MacBook.
Then connect (preferabely with a LAN-Cable) the MacBook to the Express.
Open Airport Utility on the Mac and switch to the Express.
Use the wizzard to set up the Express from scratch or use manual setting zu check the settings.
Lupunus

Qosmio X300 - Can't write disk after firmware update

Similar Messages

Maybe you are looking for