Qosmio X300 - Remote control and function bar for windows seven

Hi,
I have bought this PC with Vista x64. I have upgraded it to windows 7 (x64)
But I didn??t find driver for remote control and function bar. The drivers for Vista *64 don't work.
Help me plz.
Thanks for reading
(Sry for my bad English)

Hi
The Win 7 drivers are not available for this unit at this time.
But I found some Win 7 drivers on the Toshiba US driver page.
Of course you will not find exactly the same X300 series but you can choose the drives released for Qosmio X305-xxxx
There is no big difference between X300 and X305 so the Win 7 drivers should work too

Similar Messages

  • Need help with my Toshiba remote control and receiver for Qosmio G30 161

    Hello to all
    I have a Toshiba Qosmio G30-161 and with it I have a Toshiba remote control and a Toshiba remote control receiver, this is the first time I have used it (tried to that is), my problem is the remote is not working on the computer when I press any program buttons the computer does nothing.
    I have installed four brand new AA batteries and the remote works fine its sending signals to the receiver, the receiver the detecting the remote as a red light appears every time you press a button and as for the computer I have checked the drivers and the USB is picking up the receiver as a E-home remote receiver which I have checked with Toshiba and that is correct, so all in all the remote is working, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but this still has done anything. I have spoken to Toshiba help and support and the end result is they are not sure what the problem is. Can anyone help I require the remote for slideshows for customers as I??m a photographer.
    Also to confirm I am running Windows XP MCE addition.
    Anthony Worlock

    Hi there,
    this remote contol works, if you use it without any special drivers and special software, only in the Media Center.
    But if you install such stuff like [WinLirc|winlirc.sourceforge.net] then you should be able to get some functions for your presentation.
    Please try this tool and check if it works.
    By the way: If I were you I would first read the Manual and FAQ of WinLirc before starting because its a little bit tricky to handle the program. :) (Too many settings :D)
    Greets

  • N8 as remote control and life remote viewer for wi...

    I am going to buy wifi camera. I would like to use my N8 as remote control and life remote viewer.
    Is there any software for N8 Belle ?

    You need to contact the camera manufacturer and ask them if they are releasing an app for the N8 for that purpose. 

  • Qosmio X300-16D - thermal pad/paste solution for CPU and Nvidia MCP

    Can anyone suggest a good (specific) thermal solution for the Qosmio X300-16D CPU and Nvidia MCP?
    I ask because there is a slight complication with the 16D (an SLI setup)... the heatsink for the CPU and Nvidia MCP are connected in the same thermal module, but while the CPU heatsink is screwed down, the Nvidia MCP chip is not - so there is a large gap between that chip and the heatsink.
    I'm guessing some form of thermal pad should be used here rather than grease/paste? Does anybody know what thermal pad has been used by Toshiba for this, or point me to a high quality replacement that is suitable to be used?
    Thanks,
    Chris

    Hi
    As far as I know the thermal grease 776 (part num: K000055600) could be used.
    But there are different cooling pends as mentioned by Akuma.
    There is an thermal fan 1 for DUAL-VGA (K000061940) and thermal fan 2 for dual VGA (K000061950) as well.
    I assume both are for SLI configuration.
    There are also some other cooling modules for VGA (VGA THERMAL MODULE-1-GT-NB9E K000065560 and VGA THERMAL MODULE-2-NB9E-W/O TMA K000065560)
    You can google for these part numbers Found all in internet

  • Qosmio G30 - Media center remote control doesn't work in windows

    Dear All,
    I have Qosmio G30-194,
    first i had a problem with the VGA , i send it for repair, when it comes back i noticed that the remote control is not working on windows Media Center, while in A/V mode it work perfectly.
    I tried to do full system restore from the recovery DVD, but nothing changed, even i installed Windows Vista with all of its drivers.
    Nothing changed also, I borrowed a USB IR received for another remote control it worked perfectly with my remote on windows.
    Please advise me what to do, do i send it back to the service center , or there is an easier solution.
    Mazen Habbal
    N.B, : My laptop info are:
    Model Number PQG32E-01P018AR
    Thank you in advance

    don't expect toshiba to fix problems like this.
    they replaced motherboard on my laptop and ever since the remote was not working.. it would turn the laptop on but was unresponsive thereafter. thing's we have tried:
    - install software and drivers for remote again
    - reinstall windows
    - replace reciever
    - change motherboard
    - change remote
    - terminate and restart relevant processes
    - downgrade bios
    - update bios
    - combinations of the above
    on several occassions Toshiba told me they were able to replicate and solve the problem but after trying it on my laptop they remembered that actually their one was slightly different.
    almost a year later, i still have a non-working remote
    my theory is the laptop leaves factory with certain software which Toshiba fail to include in recovery partition and\or bios that is available through them... so once you lose the factory components (i.e.the original motherboard) you also lose some necessary files with them.

  • Remote Control and Remote View Problem

    Hi,
    I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
    Remote Control and Remote View works great but I noticed one problem.
    We have a logo of the school that is forced down on to the desktop when a
    user logs in through group policies. This logo works perfect for the
    desktop wall paper and loads every time a user logs in.
    When I Remote Control or Remote View a computer the users desktop wall
    paper turns from the logo being forced down through group policies to the
    desktop to a blue desktop wall paper.
    I would prefer the desktop wall paper staying the schools logo when I
    Remote Control or Remote View because if the desktop wall paper changes to
    the blue color I mentioned above when I Remote Control or Remote View the
    users computer, they will know that someone is taking over their computer
    which sometimes we dont want them knowing.
    We have Windows 98SE computer running Novell Client 3.4 and we have some
    computers running Windows XP Professional SP1 and Windows XP Professional
    SP2 both running Novell Client 4.91 SP2.
    The Remote Control and Remote View problem of the desktop wall paper
    changing on the users computer occurs on all operating systems mentioned
    above.
    Is there a solution to my above problem? When Remote Controlling and
    Remote Viewing someone's computer I don't want the desktop wall paper to
    change.
    Thanks!

    Bpilon,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Unable to allow remote control and deny transfer files in RM

    Hi, we're running ZCM 11 SP1 and I have a question about assiging rights to non-Helpdesk users for remote control only for user application support. It looks like if I deny transfer files that the button for remote control automatically changes from allow to deny. I couldn't find anything in the forums, KB, or docs to see if this is working as intended or a bug of some sort? If intended, do you know why remote control and transfer files go together, just curious? In ConsoleOne versions of remote management we had always limited non-Helpdesk remote operators and were hoping to do exactly the same with ZCM11. Thanks.

    Originally Posted by spond
    Newellt,
    I can't see why it would be necessary, I suggest you open a Service
    Request and complain!
    Shaun Pond
    Was there ever a workaround for this? I'm seeing the same behavior in 11.2.3 and we have a need to block file transfer but allow remote management.

  • Apple remote control and PB 17"

    I have my laptop hooked up to my TV. I play quicktime and others video media though it to my TV. The Laptop is far from where i sit so to Fast Forward or pause or anything I have to get up and control it from the Laptop.
    Is there a way to get the apple remote control to work with the PB 17" sonce it doesnt have a remote sensor like the new macbook pros do? Or any type of remote control or way to do this?
    I want to be able to control the media from about 20 feet away (Lazy I know but in theis day and age... )
    Thanks,
    Joe

    Keyspan makes several remotes:
    http://www.amazon.com/Keyspan-URM-17A-Express-Remote-Control/dp/B0006OCZLM
    As for Front Row compatibility, I don't think that's there, because it would have to break the license from Mac OS X. Equinux makes a nice software like Front Row called MediaCentral:
    http://www.equinux.com/us/products/mediacentral/latest.html

  • Wireless remote control and FM transmitter in one?

    Hello.
    Does anbody know if there is a wireless remote control and FM transmitter in one product out yet for the iPod? I am wanting to keep my iPod in the trunk of my GoldWing and control it while I ride transmitting through the FM tuner.
    Other ideas or a combination of products to accomplish this much appreciated!
    thanks
    iPod 80 GB   Windows XP  

    I spent some time (2 hrs) again with the vendor, trying to solve the issue.
    The only result we got is that, when the PC is in suspended status, it can be resumed by pressing "ON" button of the IR Remote Control. That's all.
    My suspect is therefore confirmed: it isn't a hardware issue. It lokks like the IR Remote Controller and the PC can talk eachother, but they speak different languages.
    It is quite a surprise that I couldn't find any information on the use  (Settings? Activation?) of the remote control, nor in the topics of this forum. Really I'm the only one trying to watch TV on the PC? Are there any users of a C540 who can tell me their experience?
    Thank you

  • Remote control and remote desktop client in sccm 2012 ?

    What is the difference between remote control and remote desktop client in sccm 2012 ?

    Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
    Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
    Why you would use one over the other depends on your requirements.
    Blog: www.danielclasson.com/blog |
    LinkedIn:
    Daniel Classon | Twitter: @danielclasson

  • Problem with remote control and Windows 7 - HP Pavilion 6301eu

    I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

    Hi John:
    Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
    There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
    I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
    Thanks for your help though and if you have any other ideas, I'm all ears.
    Mark

  • How do I get the remote control app to work for a Sony HDD Hi Res audio player?

    Can't get the iPhone remote control app to work for my HDD Hi Res Audio player.  The app can "find" the player and I can turn on the power with the app but then can't get it to go to my music - can only use the "demo" tool with the demo info. What am I doing wrong?

    Good day cb94!
    I'd like to see if I can assist you with the Hi-Res Audio player. Please provide us the model, use this link to verify the model: http://esupport.sony.com/ Thank you! - Paul

  • I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr

    I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr.
    The receiver that came with my notebook is a black model one (see picture below), with the following information in its bottom label:
    RC1762302/00
    3139 228 50021
    HP SPS: 435743-001
    HP: HSTNN-PRO7
    RC6 ir
    CP06 60808 A 146218 REV. B
    I never managed to make it work, from the very beginning. I know it is working, because I replaced the battery for a brand new one and it shows a blinking IR LED when I press any button and point it to a digital camera.
    Searching for "ENE CIR receiver driver" is useless 'cause I received more than one hundred answers - I tried four of them but none worked so far. 
    So, instead of trying the whole bunch, I am crying for help -  could someone please tell me which driver is the correct one for this remote model?
    Thanks in advance and regards,
    Mike  
    P.S.: I am using Windows 7 Ultimate 64-bit and Ubuntu 12.04 in this notebook 

    http://ftp.hp.com/pub/softpaq/sp46501-47000/sp4674​1.exe
    File name:
    sp46741.exe [1/1, 1.04M]
    System requirements:
    No additional prerequisites
    Released:
    2009-12-31
    Version:
    2.7.4.0 A
    Compatibility:
    Microsoft Windows 7 (32-bit), Microsoft Windows 7 (64-bit)
    Fix/Enhancement:
    Original Software/Drivers

  • HT4352 How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

    How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

    You can't, you will need to get a new remote.

  • Remote control and MSI PC-DTV Mega Sky 580

    Hello,
    I bought one of these recently and initially had problems when installed. It would initially run fine but after I closed the program down and restarted it the PC would just reboot.
    I was using the front USB ports so I moved it to the rear ports and removed and reinstalled the drivers/software. It runs just fine now and the quality of the picture superb. I've rerun the device over a few days and all seems okay. I appear to have all the available programs from the Sutton Coldfield transmitter although this morning I booted up and the screen was blank. I realised I had last looked at BBC4 and of course thats only a part time channel!
    I've looked at the MSI site at the drivers/Presto PVR updates but I am not sure which of the four I should download and use. In fact as the device is working is there any advantage in doing this?
    Lastly... I'm not sure if this is a problem or not but the remote control doesn't work. Reading through the forum I'm wondering if I have the wrong end of the stick and the remote only works with Microsofts MCE. I have Microsoft XP SP2. Does the Mega Sky 580 not have a built in IR sensor and am I wasting my time pointing the remote at it and swearing?
    Microsoft XP SP2 with current updates.
    2x300GB
    1GB ram
    Intel D820
    Onboard graphics and sound
    Dust and dog hair arranged attractively around the box!

    Hi,
    Okay I have the bundled Presto PVR software so the unit must be faulty. I thought that the remote control and bundled Presto PVR would only work if installed on a PC where the operating system was Media Centre Edition.
    So the remote control and bundled Presto PVR should work if installed on a PC with Windows XP SP2?
    It looks a bit like I'll have to get a different make. I tried to rescan the channels last night because I was missing UKTV History and now I cannot get BBC1,2,3,4 or radios 3,4,6,7. I get loads of duplicates though like 5 Q's 4 ITV3's. All this on the same aerial I was using yesterday.
    I even tried it with an indoor/attic aerial that works nicely with my other freeview (set-top style not PC) boxes but no matter what I tried I just get the same duplicated list of a few channels. Even tried it with the indoor/attack aerial upside down, back to front! Same list of 63 channels but most duplicated.
    They all work fine but I would prefer a complete set 
    I

Maybe you are looking for

  • Problem with binding of a selectManyCheckbox inside a dataTable

    Hi, first i want to point out that my english is not the best. :) A german version is followed at the end of the english text. I have a class "MyClass" with few attributes like: private long id; private String text; private Set<MyClass2> childs; An a

  • My gmail account connecting to the exchange server, does not sync correctly

    Hello, i've been with the sync. problem with my gmail account which is connecting my iPod touch 2nd-gen./iOS v4.2.1 to the google's exchange server, more specifically when i read some emails offline. Actually there is no sync problem when i read emai

  • Update a table content in database MS access

    Hi In my application i am using Database toolkit to write a table in to MS access. i am able to write a table in to database but i am facing problem in editing a perticular cell in a table which is there in data base, how this can be achieved? When i

  • Add a text row on matrix

    Hi! How can I add a new row of type text on a matrix? Thanks Luca

  • Where can I find Photoshop-themed gear?

    I am a major Photoshop geek and would love to buy Photoshp paraphernalia such as tshirts, caps, school supplies, etc. Any idea if these are sold anywhere?