Qosmio X500-11G - How to recover the BIOS?

I have a Qosmio X500-11G and I am thinking of updating the BIOS, the current version is 2.0 and the last one is 2.80. But because of previous heartattacking experiences, I would like first to ensure a way to recover the BIOS in case of a faulse flashing, before proceding.
So, my question is, if the flash of the new BIOS goes wrong, is there any way to recover the old one?
Thanks in advance.

Well. I encounter some problems with the Qosmio's fanctionability which I have nothing else to do to solve it.
To explain what is going on:
First of all when I am not using the computer but it is powered on, some times I get a blue screen.
Second, under the same condition, I am losing the USB ports (they just switch off).
I have tried to uninstall any program or driver that is implicated with the USB ports, I have tried to use or to let the computer on without any USB device connected on it, I have uninstall and reinstall all the drivers, I have removed competely and freshly install the Windows (WIndows 7 Ultimate 64 ORIGINAL), I have checked for viruses, HDD problems, registry problems, temperature problems.... but the problem still remains.
I assume it is not OS or some program mulfanction cause I may get a blue screen or the USB ports to get powered down even on a freshly installed windows without any program on, or even drivers.
I am sure that it is not some power saving plan problem because the only I use is the screen to be turned off (not the HDD).
So I thought to give a last shot with the BIOS update before I contact any TOSHIBA service.
Anyway, sorry for my long talking and If anybody have any ideas (even crazy) about the problems I face, I would mostly appreciate it.
Thanks in advance.

Similar Messages

  • Qosmio F30-112 - How to reset the BIOS password

    Hello
    I get broken laptop Qosmio F30 -112 with broken lcd.
    Now I get new lcd monitor and fix it but I can not access to bios password.
    I found out how to recover passwords for other tips of toshiba laptops but I can not find for this.
    What I looking is name of "jumper" that will reset my bios password.
    I was carrying a laptop in a local service but they did not know to remove the problem.
    Please help !!!
    Best regards,
    Antonio

    Hello
    Please visit http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/ and there you will find authorized service providers for your country. Make a call and check what can be done about that.

  • How to recover the bios password hp mini 110-1144NR

     its asking to enter current password after opening the netbook hp mini 110-1144NR how to recover from it.
    enter current password:
    password check faile
    fatal error...system halted.
    CNU0143LVS

    Please try e9l13vfk6n
    This is case sensitive. The third character is lower case "L"
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • How to recover the autocomplete data from a Time Machine backup?

    How to recover the Safari 5.1.7 autocomplete data from a Time Machine backup on Mac OS X 10.6.8 (Snow Leopard)?
    To solve other issues (Safari crashing sometimes when saving web pages), I selected:
    Safari - Empty Cache
    Safari - Reset Safari - Selected ALL - Reset
    I could later on recover some Safari autofill data restoring
    HD/Users/~/Library/Cookies/Cookies.plist
    HD/Users/~/Library/Safari/Form Values
    HD/Users/~/Library/Safari/History.plist
    but other autocomplete data is missing, including the one when filling web form search fields in web pages, for instance, and also some username and password login data on some web sites.
    How to restore all such data from the Time Machine Backup?
    Thanks!

    I also recovered:
    HD//Users/~/Library/Keychains/login.keychain
    What else should I recover?

  • How to recover the data from a  dropped table in production/archive mode

    How to recover the data/change on a table that was dropped by accident.
    The database is on archive mode.

    Oracle Version. ? If 10g.
    Try this Way
    SQL> create table taj as select * from all_objects where rownum <= 100;
    Table created.
    SQL> drop table taj ;
    Table dropped.
    SQL> show recyclebin
    ORIGINAL NAME    RECYCLEBIN NAME                OBJECT TYPE  DROP TIME
    TAJ              BIN$b3MmS7kYS9ClMvKm0bu8Vw==$0 TABLE        2006-09-10:16:02:58
    SQL> flashback table taj to before drop;
    Flashback complete.
    SQL> show recyclebin;
    SQL> desc taj;
    Name                                      Null?    Type
    OWNER                                              VARCHAR2(30)
    OBJECT_NAME                                        VARCHAR2(30)
    SUBOBJECT_NAME                                     VARCHAR2(30)
    OBJECT_ID                                          NUMBER
    DATA_OBJECT_ID                                     NUMBER
    OBJECT_TYPE                                        VARCHAR2(19)
    CREATED                                            DATE
    LAST_DDL_TIME                                      DATE
    TIMESTAMP                                          VARCHAR2(19)
    STATUS                                             VARCHAR2(7)
    TEMPORARY                                          VARCHAR2(1)
    GENERATED                                          VARCHAR2(1)
    SECONDARY                                          VARCHAR2(1)
    SQL>M.S.Taj

  • In OBIEE 11G, how to get the special parameter created by JAVA?

    Hi Experts,
    In OBIEE 11G, how to get the special parameter created by JAVA?
    For example:
    In JAVA , it has set one parameter named 'test'.
    So how to get the parameter in filter area in OBIEE?

    Hi Kobe,
    No P2 holds the parameter name like PresentationTable.ColumnName, in your form you may go for complete name or just column name and before submitting the form you can define the Action url.
    I would suggest to read section 6.3.2.1.
    ex:
    <SCRIPT LANGUAGE="JavaScript">
    changeAction(url) {
    var TestVar = form.inputbox.value;
    document.this_form.action="saw.dll?Go&Path=/Shared/Test/SB2&Action=Navigate&P0=1&P1=like&P2=Customers.Region&P3="+TestVar;
    </SCRIPT>
    </HEAD>
    <BODY>
    <FORM NAME="myform" ACTION="" METHOD="GET">Enter something in the box: <BR>
    <INPUT TYPE="text" NAME="inputbox" VALUE=""><P>
    <INPUT TYPE="button" NAME="button" Value="Click" onClick="changeAction(this.value)">
    </FORM>
    If helps pls mark.
    Edited by: veeravalli on Oct 24, 2012 10:25 AM

  • How to recover the database when some of the archive log file get deleted.

    I am facing a problem with Oracle database, which is related to archivelogs.
    Our development database is running in archivelog mode, but we don't have backups scheduled and have no recovery catalog.
    When the database was in running condition, disk got full, so some archivelogs were deleted manually.
    After this they restarted the DB, and now DB is not coming up. Errors are as follows:
    SQL> startup
    ORACLE instance started.
    Total System Global Area 1444383504 bytes
    Fixed Size 731920 bytes
    Variable Size 486539264 bytes
    Database Buffers 956301312 bytes
    Redo Buffers 811008 bytes
    Database mounted.
    ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
    SQL> alter database open resetlogs;
    alter database open resetlogs
    ERROR at line 1:
    ORA-01113: file 1 needs media recovery
    ORA-01110: data file 1: '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
    SQL> recover datafile '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
    ORA-00283: recovery session canceled due to errors
    ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
    SQL> recover database using backup controlfile;
    ORA-00279: change 215548705 generated at 09/02/2008 17:06:10 needed for thread
    1
    ORA-00289: suggestion :
    /export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
    ORA-00280: change 215548705 for thread 1 is in sequence #1107
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    /export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
    ORA-00308: cannot open archived log
    '/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
    ORA-27037: unable to obtain file status
    SVR4 Error: 2: No such file or directory
    Additional information: 3
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    CANCEL
    Media recovery cancelled.
    SQL>
    1. How to recover the database and bring it online
    Any help will be highly appreciated.
    With Regards
    Hemant Joshi
    Edited by: hem_Kec on Sep 7, 2008 9:07 AM

    Hi,
    Archive log files are the copies of redolog files.As redo log files are circularly overwritten,oracle generates archive log file of the corresponding redo logfiles being overwritten.So if you have a backup that dates back to 10 am in the morning and if your database creashed at 3 pm,you cannot use the redo log files alone as they have incomplete information.To completely recover the database upto 3 pm,you need archive log files generated between 10 am to 3 pm. In your case since you are missing one archive log file,you cannot perform complete recovery and hence would suffer data loss.

  • Hi Everyone, i lost my KN presentation that i spent a day with my boss to finish it. I lost it by mistakenly shutting down my Macbook pro. Can anyone please tell me how to recover the files back as i'm really2 in trouble and my job depends on it...

    Hi Everyone,
    I lost my KN presentation that i spent a day with my boss to finish it. I lost it by mistakenly shutting down my Macbook pro. Can anyone please tell me how to recover the files back as i'm really2 in trouble and my job depends on it...
    hmmm...how i hate myself for being such a careless person...
    PLEASE HELP ME...
    Thank you in advance.
    Keynotes '09
    Version 5.1.1 (1034)

    How exactly did you shut down your laptop? Not a hard restart (holding down the power button), I hope... if that's the case, then it is extremely unlikely the file is still intact on your computer. If it is, it would be an image on your RAM, and it is time-and-resource-intensive to recover it if it is even there. RAM memory is disposable and always being written over. Sorry dude...
    If it wasn't a hard restart, Keynote should have made a backup, unless you 'Force Close'd it.
    It really all depends on how your mac was shut down.

  • How to recover the mailboxes from the decommissioned exchange db .

    Hello All,
    I have 2 EDB files on my exchange server which is no longer active its been decommissioned and the EDB mailbox is dismounted, 
    I would like to recover few emails/mail boxes from the EDB file and am not able to find any free tool which can help me in recovering the emails, 
    1. How to recover the mailboxes from the decommissioned exchange db 
    2.Tried using from free 3rd party tools which helped me view the mail boxes however am  unable to convert or recover the emails using the demo/ trial version and cant think of buy/purchasing the application since its very expensive $299 and $399 
    I know there are lot of exchange gurus here who can help me with some workaround in recovering the mailboxes from the EBD or on how to convert the edb file to pst 
    Looking forward to get some help from exchange gurus 
    Thanks, 
    Jean
    Jean

    Hello All,
    I have 2 EDB files on my exchange server which is no longer active its been decommissioned and the EDB mailbox is dismounted, 
    I would like to recover few emails/mail boxes from the EDB file and am not able to find any free tool which can help me in recovering the emails, 
    1. How to recover the mailboxes from the decommissioned exchange db 
    2.Tried using from free 3rd party tools which helped me view the mail boxes however am  unable to convert or recover the emails using the demo/ trial version and cant think of buy/purchasing the application since its very expensive $299 and $399 
    I know there are lot of exchange gurus here who can help me with some workaround in recovering the mailboxes from the EBD or on how to convert the edb file to pst 
    Looking forward to get some help from exchange gurus 
    Thanks, 
    Jean
    Jean
    Hello,
    There are so many third party software available in Web that can easily fix your Exchange Database issues, you can check out such  a software from here http://www.exchangerecoverytools.org . By using this software (Kernel for Exchange Server Recovery),
    you can immediately repair and convert damaged EDB to PST files.

  • How to recover the deleted reports from crystal reports XIR2

    Hi,
    There have been few crystal reports have been deleted from crystal environment and i would like to know how to recover them. please advice the best possible ways to recover them. CMS repositoty in SQL server database
    thanks in advance
    Regards,
    Krishna

    Hope, your question is this "How to recover the deleted Crystal reports in XI R2".
    Answer for this question is...
    Yes, it is possible if you have backup of your CMS and FRS.
    Copy the CMS database from the backup to your database server and point the CMS ODBC system DSN to it.
    Copy the backed up file store to a Temp directory.
    Change the path of input and output file repository servers in the CMC, for each server, to the Temp file store directory.
    You will now be able to find the reports. Copy those reports to the BO server's local disk, or create a BIAR file using the Import Wizard.
    Point the ODBC system DSN back to the original database and also change the paths on input file repository and output file repository servers back to their original locations.
    Publish the reports to Enterprise from the BusinessObjects server's local hard disk.

  • How to recover the deleted FSV in ob58

    Please guide me how to recover the deleted FSV.

    The forum [FPM - General|Enterprise Performance Management (SAP EPM); in which you originally posted your question deals mainly with the financial performance applications otherwise known as Enterprise Performance Management (EPM) carrying the BusinessObjects brand.   Your question pertains to SAP [ERP Financials|SAP ERP Financials; which is covered by another forum.  Therefore your message has been moved.  Please adjust any bookmarks you might have and post to the appropriate area in the future, that way you are assured you will have the right audience reading your posts.
    Thanks and best regards,
    [Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
    SAP Labs, LLC
    BusinessObjects Division
    Americas Applications Regional Implementation Group (RIG)

  • How to recover the Application ?

    I have deleted one application accidentally in c drive (not delete in iPhone). How to recover the Application ?
    Please reply.
    Thank you very much.
    Lawrence

    Thank you, Kim Vanleeuwen
    Sorry that it is iPad, not iPhone.
    I think that the treatment is as iPhone.
    But why there is still no reaction, as following your instruction?
    Thank you
    Lawrence

  • HT3986 i formated my macbook pro with windows 7 and i lost all the drivers, does anyone know how to recover the drivers?

    i formated my macbook pro with windows 7 and i lost all the drivers, does anyone know how to recover the drivers?

    How did you get them to install the first time and where did you get them?
    Read the Installation Guide, Boot Camp 4.0 FAQ and the Windows 7 FAQ.
    Here's the Boot Camp Manual.

  • Due to reinstallation of mac 2nd partition is nt showing how to recover the partition and data

    Due to reinstallation of mac 2nd partition is nt showing how to recover the partition and data

    If you have no backup your only option is to perform incomplete recovery (point-in-time recovery) to the time just before the drop, export the table and then restore the database (for example, from a cold backup taken just before the incomplete recovery,) and import the table. This obviously requires a full backup
    taken before the drop which you don't seem to have, so the answer is "regrettably no."
    If you have a backup;
    Take backup of ur current db, apply previous day backup, do point in time recovery to get table back,export table, shutdown and apply latest backup, import table back
    Regards,

  • I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the one PSD files by distorting the images and colour. Does anyone know how to recover the original images?

    I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the open PSD files by distorting the images and colour. They are now completely unrecognisable and unusable. Does anyone know how to recover the original images as I was saving them as I went along but the files are now corrupt?

    What version of Photoshop are you running?
    I've seen a couple of instances over the last week or two where Photoshop has added masks, strange colours and also merged content from two separate PSD files that were open at the same time.
    This has occurred on two different iMacs, (both 10.10.x) running Photoshop CC 2014.2.2 (20141204.r.310 x64).
    see image below for example:

Maybe you are looking for

  • 11g Database Adapter: How to make queries using LIKE with % (possible bug?)

    Hi there! Sorry if this has been answered before, but the forum search ignores '%' so I could not find anything relevant. I'm completely at a loss here guys so any help will be really appreciated. I've got a database adapter that executes a "pure SQL

  • Open File in Backgroud

    Hi All, I have an excel file in a sharepoint which I can read using ALSM_EXCEL_TO_INTERNAL_TABLE.  The problem is that I need to run the ABAP program that reads this file in background.  Unfurtunately ALSM_EXCEL_TO_INTERNAL_TABLE is not designed to r

  • AD update manager attibute by employeeID

    Hello, I want to find users in AD by employeeID. and add new manager by employeeID from next row. I found this script and i want change searching ManagerDN by sAMAccountName to searching by employeeID Can someone help how edit this script? My example

  • How do i change the password on my imac?

    Hi Guys, I just got an old Tangerine iMacrunning Panther and when I first turn it on, (I show it a scantily dressed psion) a password screen appears asking for name and password. i know what they are and can enter the details and it works fine but I'

  • How to adjust line level input?

    Anybody know how to adjust the input level of my 1/8" input? Everything's coming in too hot.