Qosmio X500 - NEW BIOS update - 1.90

Found a new BIOS update 1.9 on the Australian Toshiba Website. This morning it was showing version 1.40, but now it says version 1.90. I will try it on my X500 when I get home tonight, see if it fixes the Sleep-wake up issue.
http://www.mytoshiba.com.au/support/notebooks/qosmio/x500/pqx33a-00x00j/download?os=25
Aaron

Hey danied...thanks for sharing this....yes I have a Qosmio x500-110 (win7 64 bit) and its been giving the Bluetooth disconnection/ finger print sensor/and webcam not initialised problem since the start.
Dont know what is causing this problem. I have tired installing all the drivers with no use. All the three get disconnected together. Also there was sum problem with my Bluetooth stack so I downloaded the latest on e from Toshiba website and the software works fine now but once it gets disconnected with the webcam u need to restart.
This problem is still there...

Similar Messages

Qosmio X500 - NEW BIOS UPDATE 2.20

Anyone downloaded the new 2.20 BIOS yet ? I wonder what problems it is trying to fix ?

I did a search and found this
*Version 2.20 - 2010-02-23*
Modified the LID function.
Updated the verb table.
Added a solution for USB port 6/7 sightings issues.
Added a solution for the Synchronous Interrupt Ordering sightings issue.
Changed reboot to warm boot, and also fixed an issue where resuming from S3 caused reboots.
Updated the EC to version 0.28.
Set a CPU reset command after Multi-core setting changes.
*Version 1.90 - 2009-12-31*
TLC mode supports Computrace.
Disabled ASPM of the WLAN.
Removed the "for Evaluation only" string from POST.
Restored the Thermal base address after S3 Resume.
Program HDMI while S3 Resume.
Fixed: "F12 string" issue.
Changed the EC to TZ1H_26.bin.
Disabled HDMI by GPIO in the _PS0 method.
Fixed "S4 Resume fails after loading defaults."
Message was edited by: Aaron Richards

Qosmio F30: New BIOS update 3.20 t0 3.40 was released

new updated bios released on 08/03/07
v3.40

Dear Reaver I appreciate your participation on this forum and I have noticed your permanent helpfulness here on this support forum. Respect!!!
I would like to give you 10 reward points now but unfortunately it is not possible. ;)

Qosmio F50 (PQF55E) Bios Update

The Battery of the F50 wont charge, maybe a problem of the BIOS (like U400)?
Question: Where can I find a BIOS Change Log File for the BIOS version released 6.11.08?

Hi
As far as I know there are not any details on the Toshiba European page about BIOS changes. I searched but I didnt find anything
However, if there is a newer BIOS update for you notebook model then you could update it. Lets see what happens
But there is still a big chance that your battery could malfunctions
Greetings

Tecra A9 - What are the changes in the new Bios update

Can someone tell me the changes in the actualy BIOS Update v1.70 and the old ones?
And is there a PDF outside where i can see the detailed description about the Bios functions?
Thanks
Greetings

So, until now my question has no answer!
In the US Forum is the Service from Toshiba is much more better ->
[BIOS details|http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=1978903&moid=1702318&rpn= PTS53U&BV_SessionID=@@@@2130665852.1205800119@@@@& BV_EngineID=cccjadedikgfkdgcgfkceghdgngdgmn.0&ct=D L&all_docs=false]
I also must send my Tecra A9 to the support to change my DVD-Burner (Teac) and it taks 3 Weeks.
I am not very happy with this support at all!
Now Toshiba has released a new Bios Update v2.10 and i didn't now what are the changes.
Greetings

How to disable Toshiba TEMPRO alerts about new BIOS update

Hi just installed TEMPRO on my W8 Satellite L875 laptop, ant it's saying there's a new bios update available - (1.60-WIN) which is the same version as I've already got.?:|
Q: how can I make this alert go-away ?
-Tom

Thanks, but that's not quite what I had in mind ...
I would have expected tempro to examine my system & installed components, and to alert me when a new/updated driver is released. I would then install the new/updated driver, and then tempro should dismiss the alert - or perhaps I'm just not understanding how tempro works ?

Satellite A500-149: Would new BIOS update 2.00-win solve illumination issue

Hi
I need help because i have one toshiba A500-149 but the ilumination of keyboard dont work (FN+Z).
I see a new Bios update and my question is:
This new update 2.00 win solve that problem?
this upgrate is secure?

In my opinion the BIOS 2.0 update does not solve your problem.
A friend of mine is an A500 owner and the backlight keyboard functions using old BIOS.
I think there must be another reason for your backlight problem.
Did you see this knowledge base article?
http://aps2.toshiba-tro.de/kb0/HTD2603CL0000R01.htm
in some cases you need to press FN + Y due to different keyboard layout.
The FN buttons are controlled by value added package as reported by users above...
Reinstallation of VAP should help you be sure you use the latest VAP recommend using one released for newer series like A660/A665
But if the VAP does not help, and if backlight is enabled in BIOS, then there must be a hardware issue maybe the 2nd keyboard cable is not connected properly to the backlight connector loose connection might cause this

Northbridge temps and the new bios update

I know the Northbridge temperature issue has been posted before. But I’m posting in relations to the new bios update supposed to be released 08/24. Will these temp issues be resolved in this new bios update?
There could be many reasons why the Northbridge temps are so high, ranging from bad heatsink design to Northbridge fan blowing too fast. Mine runs 55C idle which is way too high…but when I go to touch the heatsink, it’s barely warm. A lot of people have been complaining about the “light show” on the Northbridge, but heck I like it. I think it’s pretty cool
One last thing I’d like to bring up, this new bios update, I don’t know whether or not 1.6 supports DDR500mhz Ram (because I don’t have it yet) but will it support it? Reason being is I plan on buying DDR500mhz Ram and do some more overclocking.
1:1 Cpu to Ram ratio here I COME!!! :D

ROFLMAO (first sign of insanity when you laugh about a such sad matter)
Maesus, its nothing personal, but do you really believe there will be a v1.8 BIOS? To me it looks like MSI has abandoned the 875P. BIOS v1.7 is supposed to come when? ...August 28th? That's 2 months since the last one and as far as I have heard there has not much changed over v1.6. When is v1.8 supposed to come? Another 2 months later? Not to speak of v1.9... That makes about 5 months to get the board working the way it was supposed to do from the first day (if v1.7 solves something at all).
Sorry, but MSI is about to lose all trustworthiness with this so called support. And moderators in a company's forum who are not even employees of that company, and have to take guesses (see Prescott support) about the products, do not help to make the situation much better (again, nothing personal). If the support team would take a look by themselves on a regularly basis (1-2 times a week) perhaps then the problems would be solved much faster. If I would work like this and not care about the customers I would have lost my job long ago.
There are still many problems. The board is on the market for some months now and memory compatibility and timings are still an issue.
I've visited many forums the last week. And I do hear (read) almost the same everywhere: Poeple who bought the 875P board say its high quality and has good features, if it only would work as supposed. MSI miserably fails to give it a working BIOS. Results in polls about "MSI 875P board good or bad" tend to be weighed horribly to "bad". Most of the ppl will never again buy a MSI board because they feel left alone with their problems.
It is clear that ppl who are satisfied do not post that in forums. But when something is wrong, they do, because they want the problems solved. But what are support forums good for when no one is listening to the complaints?
In times who prices are almost the same for the products, ppl tend to buy that product, that not only has the best features but also good support. When it comes to that MSI is not first choice.

Games Flickering with new bios update 351

Games Flickering with new bios update TV277MH.351 basically when i flash my card with that bios i got in game flickering of 3D objects this is SErial number
S/N:602-V277-250B1407011905 thank you in advance

Quote from: misel.verk1 on 15-April-15, 19:02:26
The one provided from above in the post by Flobelix
The OC mode .

Requires new BIOS update

Hi, I bought a new network card Intel® Dual Band Wireless-AC 7260 and I tried to install it into my HP DV6-6171TX however the BIOS state that it is not supported. I tried to look for BIOS update but the latest update they have online is in year 2011 version F.1B. Can I get new BIOS update to that I can get the network card to work?

Symphofear wrote:
Ok throught the manual which I went through, I bought an Intel Centrino Advanced-N 6230 which was also stated inside the manual however after I had changed to it and tried to bootup my laptop, the bios still have the same error. I am using the Intel processor, not the Amd one.
You have to use a wireless card under the exact part number (BIOS will reject any other and you get the error). The part number for Intel 6230 belongs to a different Intel wireless card (unfortunate error from HP). I think it's Intel 1030. Dv6-6000 series is the last series with the whitelist still in it. There is an Intel 6230 listed under a part number: 636672-001. Perhaps it will work.
edit: I have found Intel 6205 listed under 631954-001 but it's a pure wireless card, not a combo with bluetooth.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

W520 and new bios update

I saw lenovo released the new bios update for the W520 and it says they updated the cpu microcode. Does that mean it will accept Ivy Bridge CPU's?
Also what is your thought on W500 laptops in today's world? Are they worth hanging onto for anything or basically obsolete. I have 7 of them with the 1920x1200 resolution screen and 4 gb ram, would they be able to run the newer versions of autocad and catia?

no the W520 doesn't accept Ivy Bridge CPU.
The W500 run AutoCAD and Catia, but would be very slow if you have many parts. So if you are using the W500 for work, then you should consider upgrading.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

New BIOS Update for the Z61m Series

Hi,
I have a problem with the downloading of the new BIOS Update for above mentioned notebook. Lenovo provides the version 2.25, but only via BIOS utility (exe-File), although a link to bootable CD exists. Can anyone confirm this or can help me?
Do anyone know a possibilty to contact lenovo/ibm in an easy way (not by contact form)?
Thanks in advance,
AfterBurner

I have the same problem! Will try wit System Update!

New bios update (f.29) causes my computer to overheat and shut down

New bios update (f.29) causes my computer to overheat and shut down. What should I do?
This question was solved.
View Solution.

Reflash to the previous version.On your drivers page, beside the BIOS update there should be a link to 'Previous versions'.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Qosmio X500-11U- Question about new BIOS update

Hi to everyone
I need to clarify a matter, the BIOS update that was released December 2010 was the 2.90 now a new release march 2011 is named 1.40! Is this an upgrade a downgrade or a joke? Should I proceed with the newest 1.40 or stick with the old 2.90?
I forgot to mention that I own a X500-11U and thanks in advance

Hi nick73,
On Toshiba European driver download page there are two different versions available:
BIOS-Update 1.40-WIN for X500 PQX34E models
BIOS-Update 2.90-WIN for X500 PQX33E models
Your model the X500-11U belongs to PQX33E series and that means only BIOS Update 2.90 is compatible and 1.40 would be the wrong version.
So its not a joke and before you search for BIOS update next time, also use the correct part number ;)

Qosmio X500 - Improvements of new BIOS update

Does anybody know what issues are addressed by the BIOS update issued on 7th of January 2010?

You can see the list of fixes at the US Toshiba SIte at:
[http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2436373& rpn=PQX33U&modelFilter=X505-Q850&selCategory=3&selFamily=804517]
Select the 1.4 BIOS upgrade to see the change history.
I installed 1.4 and now my X505-850 won't come out of sleep mode, I have to force a power off by holding down the power button. I see other people with the same problem with 1.4. I have to use Hibernate or shut it down. It does fix the Fan problem with enabling the "USB Sleep and Charge" feature.
Message was edited by: mjpoplaw

Qosmio X500 - NEW BIOS update - 1.90

Similar Messages

Maybe you are looking for