Qosmio X500 won't start and the power LED is blinks every 5 seconds

Hi,
I need help my X500 won't start now. I tried to start the NB as usual and suddenly the X500 wont boot or even power up.
If I press power button it doesnt make any sound, the power LED on button and the second power LED just bliks once and turns of, and keep blinking every 5 seconds.
I tried to:
* remove battery and power up with AC only
* power with battery only
* remove battery hold power button for 30 seconds and more athen power with AC only, battery only
but it didn't helped.
I checked the AC & Battery LEDs, but they are not flashing, they are just RED, so there is not proble in battery or AC.
Any idea where could be the problem?
Thanks for help
Frantisek

> {quote:title=FrankieCz wrote:}{quote}
> Hi,
> I need help my X500 won't start now. I tried to start the NB as usual and suddenly the X500 wont boot or even power up.
>
> If I press power button it doesnt make any sound, the power LED on button and the second power LED just bliks once and turns of, and keep blinking every 5 seconds.
>
> I tried to:
> * remove battery and power up with AC only
> * power with battery only
> * remove battery hold power button for 30 seconds and more athen power with AC only, battery only
>
> but it didn't helped.
>
> I checked the AC & Battery LEDs, but they are not flashing, they are just RED, so there is not proble in battery or AC.
>
> Any idea where could be the problem?
>
> Thanks for help
> Frantisek
hello FrankieCz
i have similar problem with my laptop
how do you solve it

Similar Messages

Took apart Macbook pro 13 to remove broken headphone tip in the jack. Had to remove battery to get to the headphone jack. Now the laptop won't start. The power button is just not responding. Battery indicator showed charge of 3 dots initially but now only

Took apart Macbook pro 13 to remove broken headphone tip in the jack. Had to remove battery to get to the headphone jack. Now the laptop won't start. The power button is just not responding. Battery indicator showed charge of 3 dots initially but now only the last dot is blinking. The power cable used to light up green initially but now the green light is gone. I have tried SMC reset, which didn't work. What are my options?

Macbook Pro2067 wrote:
<snip>
What are my options?
Take it to an authorized service center.

G62-454ca won't turn on.power led and wireless network led keeps blinking every 3-4 seconds

Please help.when I try to turn on nothing happens.Only power LED and wireless network led keeps blinking every 4 seconds

According to the message you have recently posted I would like to confirm that this is a hardware issue and I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer
You can also Check your warranty Here to verify the warranty status
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

My sister spoiled water into my macbook pro and the power went off in two seconds. I took off the cover and dried the water with tissues. Still it doesnt work. What do i do?

My sister spoiled water into my macbook pro and the power went off in two seconds. I took off the cover and dried the water with tissues. Still it doesnt work. What do i do?

Do you mean when the water was spilled on it, it shut down? That would indicate a major internal short occured.
Really, I'd say you need to take it into Apple or an Apple authorized repair center and get it looked at. Odds are you've got a significantly damaged device that will require professional repair and parts replacement to get working again.

My router is dead and the power led is flashing the firmw...

my router is dead and the power led is flashing the firmware is corrupt i have tried everything to fix it and i cant access the web based setup

Assign a static IP address on computer like 192.168.1.10 and see if you can ping 192.168.1.1 if yes, you can try updating firmware using tftp utility.

My Mac Mini won't start. The Power light blinks continusly (not pulses)

My New Mac Mini won't start up. I bought it online from J&R a week ago. My monitor says "no input detected" and the power light blinks. I recently fed it the gray mac os x install disk one, which it won't give back. Holding the mouse button when it turns on doesn't have any effect. So now i can't put a disk in or start it up.

Welcome to the Apple discussions.
No video with the power light blinking once per second means either bad or no memory. See this Apple note: http://docs.info.apple.com/article.html?artnum=303083 . Specifically, below is from that note:
If the computer detects no SDRAM (Synchronous Dynamic Random Access Memory, also referred to as RAM) or the RAM installed does not meet the appropriate specifications, the screen will remain black but the power LED on the front of the computer will blink once per second to signal the error. This error condition may be due to physically damaged RAM, installing the incorrect type of RAM, or not having RAM installed.
Has it ever worked since you got it? If not, you should call J&R and tell them they sent a dead on arrival system, and ask for a replacement (ask them to send a will call tag or prepaid label to send the non-working machine back).

Macbook shutdown. It won't reboot and the power cord isn't lit when plugged in

Had my macbook running and it just shut down. I cannot get it to reboot and the power cord isn't lit up when it is connected to the computer. The only problem leading up to this was I could not use the computer unless the power cord was connected. Any suggestions? Thanks

Try to chack your battery health with Battery Health which is available at Mac App Store for free.

No connection, and the power led on my router keeps blinking!!

Any help would be great!

Ok, you are not going to believe this, but I was having the same problem and now it is fixed!
First, I am no hardware guru, so for those of you who find my fix to be common sense, at least cut me some slack for trying every possible soultion :-)
First, I bought this Linksys model to replace MY EXISTING router, which I think is the W065 or something, a very good G model.
So when I hooked up the E3000, I did what evey lazy gamer does who's in a hurry.....I USED THE OLD, ALREADY CONNECTED, POWER CORD!!
Apparently, this old power cord does not provide enough power or something, because the router simply kept getting stuck in diagnostic mode (flashing power LED). it would occasionally stabalize, but only to eventually (usually inside of 5 minutes) reverting back to Diag mode and loosing all connectivity.
MORAL OF THE STORY: ONLY USE THE POWER CORD THAT SHIPPED WITH THE E3000!!
Hope this helps someone, cuz it drove me insane!!

T400 Hangs Surfing or Working on WiFi Network and the Wifi Led stops Blinking !!!

I have a T400 Model (2764CTO) - with 5300 AGN, 2.53 Ghz, 3 Gigs RAM.
I have been facing a wiered problem - my machine hangs - all of a sudden - and at the times - after the machine has hung - the WiFi Led - goes off. I have searched and installed PC Doctor for Lenovo - and it does not capture the Hang Event. The only option I have left is a Hard Re-Boot.
Can any one please help. I have updated my LAN Drivers and WiFi Drivers - and still dun know what cud be causing this issue !!!

Hi drpiso,
Thanks for the question. Based on what you stated, it seems like the computer is the only device having trouble connecting only to your home network. I would recommend that you read this article, it may be able to help the issue.
iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario

HT4623 Updated from ios5 to ios6 but its been a day and the apple logo keeps blinking every minute

Using iphone 3gs
Please help

Hey Raffy613,
Welcome to the Apple Support Communities. Sorry to hear about your issue, the issue sounds like the install did not take. The following article will assist with restoring and reinstalling the operating system on your iPhone.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

PB won't start, has no power, won't charge BUT I NEED THE INFO desperately

Hello! As the subject states, it won't start, has NoOoOoOo power, cannot get it to charge (and it's been plugged in now for 2.5 days). While RIM CS said they might fix it, I need to get the information off the tab first as it's REALLY really REALLY important.
I did post in another thread, but it seems my issue is just a little more challenging that most, as I've tried ALL the "ideas" that I have come across - here and in other site forums. If only it were as easy as the pins being bent or getting another charger.....
So not only will mine NOT start up, and is COMPLETELY dead, but (and here's the fun part) the USB port has been busted since purchase. (Thought we'd manage without, but hah....)
- the battery was NOT fully depleted when it crashed as it does every second day (this was Friday)
- have a Rapid Charger, and have been using it all along
- it has been plugged in for DAYS and nothing IS happening; no lights whatsoever
NO light red, yellow, green, or otherwise that comes on when plugged in (or otherwise)
- Looks like this "stacking" that keeps coming up refers only to when plugged into computers, which I cannot do,
though I did try the 2 min interval anyhow for awhile
- I DID hold down the power button for 10, 20, 30 seconds per notes on these boards
- I DID hold down the power button for 2 whole minutes even per some suggestion
- I DID try the power button with Volume + then with both volumes and power all at once
- In fact, if anyone anywhere wrote to jump up on one foot, I tried that too!
AND the reason it matters . . . there are photos or someone who has passed away on there that I need to get off before sending for repair (or better yet replacement if there are any left anywhere) and really need to get this thing started again. Been a long time that I've been trying to get these images off, though I think that's another discussion for when it gets started hm...)
Anything, oh wise BB PB peeps??
Thanks in advance!!

chaosdivine thanks for the idea!
Had to laugh at the comment that the USB would be wobbly after some time had gone by. Mine was broken after first attempt to even use it!
Anyhow, good post, but did all that already. Plugged in and sit, plug and unplug, plug and try to turn it on, leave it off, etc. and then some etc.

Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS

Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS?

Take each of these steps as needed, and check to make sure it hasn't been fixed with a reboot afterwards before trying the next step.
Backup your data if you haven't already:
https://discussions.apple.com/docs/DOC-1992
If you use Airplay, see https://discussions.apple.com/docs/DOC-6831
If you don't use Airplay, be sure to upgrade to 10.9.2, using this update:
http://support.apple.com/kb/DL1726
Make sure your hard drive is not over 85% full.
Make sure Spotlight is not indexing.
Make sure Time Machine is not running when you do other tasks.
Check to make sure you have not accidently/purposefully installed MacKeeper, as it will slow down your Mac:
https://discussions.apple.com/docs/DOC-3036
Remove any other system cache cleaning applications.
Reset the SMC:
http://support.apple.com/kb/ht3964
Reset the PRAM:
http://support.apple.com/kb/ht1379
Check to make sure there aren't any signs the power adapter might be damaged, or the wrong one*:
http://www.macmaps.com/frayguide.html
If there are still issues, you may need to replace the battery:
https://www.apple.com/batteries/replacements.html

My 2009 13 MacBook will not turn on or start up, the power cord won't show up green anymore either

My 2009 13 inch MacBook won't turn on or start up, and the power cord doesn't turn green anymore. When it first wouldn't turn on the power cord still turned green. Please help!!

Might be a problem with the power adapter > Apple Portables: Troubleshooting MagSafe adapters

My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing a green and amber but very dull. Help please!

My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing the amber light. I don't know what to do, and this has never happened before.

Hello Toby135
Reset the SMC or System Management Controller to resolve issues with the power on your MacBook Pro and power adapter.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Regards,
-Norm G.

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
Reset SMC no change

Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

Qosmio X500 won't start and the power LED is blinks every 5 seconds

Similar Messages

Maybe you are looking for