Qosmio X505-88* - US/EU power supply

Does anyone know if the X505-88* models can be used in EU power grid with a socket adapter? Does the laptops power supply accept 110 / 230 V ?
I plan to purchase a model from US and use it in EU too.
Thanks in advance.

Thanks Xardas for the anwser. I have another Toshiba laptop (different series) bought from EU and has both voltages on the A/C. I am going to buy the Qosmio online so i am not able to check the A/C before. But just now i have downloaded the detailed specs for the laptop and it says it accepts both. Don't know why i didn't thought of that before :).

Similar Messages

  • Qosmio notebook question about mains power supply

    HELLO GUYS
    I just wanted to know if a buy a Qosmio from the America or other countries in europe will they play on UK mains power supply. I saw one on ebay that said it had an auto sensing power supply which will work anywhere. But i wasn't sure if i should believe this.
    Thanks in advance

    hi Navdeep,
    Most modern AC adapters work on a voltage range of 100-240 volts so they can be used virtually world wide. This obviously saves the cost of producing specific adapters for different countries or regions.
    Just check the specifications for the Qosmio in the country where you plan to purchase it.
    regards,

  • Toshiba Qosmio X505-Q870 power button unresponsi​ve but laptop powers up using media control button

    Well this is perplexing, I could really use some help.
    My power button on my Qosmio X505-Q870 is completely unresponsive. I've tried holding it for 30 seconds, but to no avail. I removed the battery & replaced the battery, testing the power button by pressing it for 30 seconds or rapidly pressing it - makes no difference whatsoever.  But then, I noticed if I touch the media touch button, the computer powers up! (And opens up Windows Media Player) Very stealthy...
    Now when the laptop is already powered up, pressing the media button does not turn it off. It only opens Windows Media Player.
    Here is some background info that may or may not be helpful:
    1 1/2 years ago:
    RAM was upgraded to 8 MB
    I replaced the HDD with a SSD, and then installed the HDD into the 2nd bay.
    Computer has been running fine since these changes, aside from running hot when gaming.
    2 days ago:
    I upgraded the SSD to a larger drive.
    Then, I disassembled the laptop with the intent to apply some thermal compound and clean the fans to address the temperature issues.  I could not complete this task because 2 screws were stripped and I couldn't get the cover off, afterall.
    I did not swap any connections, but did notice one seemed a bit loose after carefully lifting up the keyboard so I gently eased it back in to place.
    I put the laptop back together, and that is when the power button and media center button issue began. So it must be a result of either opening the case or upgrading the SSD.
    Any thoughts on what could be causing this to happen?
    And if anyone has a trick to remove stripped screws without taking a drill to my laptop - I'd love to hear your ideas. Thanks!!

    nTia89 wrote:try to downgrade the kernel with a working version
    Thanks for your reply! Actually, yesterday I upgraded to the new kernel (version 3.4.3-1) and my laptop has not freezed since then. So, maybe I will wait for a couple of days and hopefully mark this as solved.

  • Qosmio X505-Q875 - Can't install my work software package

    I have to say I'm extremely disappointed in Toshiba. I'm a small business owner and use some pretty advanced software for which I pretty much need a gaming style laptop for. After looking at many different companies, including custom high end builders, I settled on a x505-q875 that I purchased from Newegg.
    First of all, I couldn't even install my primary work software package. This software uses a USB hasp for anti-piracy. The HASP wouldn't install, no matter what I did. After exhausting my options, I opted for a clean install of Windows. I have a full Windows 7 license which allows for laptop installation. So I wiped the laptop clean and started with a clean slate. I go onto the Toshiba website to get the component drivers and ...whoa!...they aren't there! Luckily for me, and a couple of hours into the process, I did manage to find a driver for the Nvidia GTS 360m. Fortunately, some guy had posted online a workable driver that supports the 360M. That one could have sunk me. This laptop had to be operational for a business trip I am going on tomorrow.
    I hope Toshiba reps at least browse this forum and if so, these are the points I would like to make.
    1) If you have released units to resellers of any product, there HAS to be driver support online. I never make backup discs as I've never had to. Every time I ever needed a driver, it was on the support site. There is no excuse for this. This product doesn't have a "release date". As a consumer, when I purchase something, I expect the support to be available when the product hits the shelves.
    2) In your "detailed" product specs, how about mentioning who supplied the wi-fi cards? Simply saying "Wi Fi Card" really isn't going to help anyone fishing for a driver. Thankfully, you guys haven't changed and it was still the RealTek wireless card.
    3) It is important that Windows be left as vanilla as possible, for people like myself who use these things for business. A lot of business productivity software does not like being installed on OEM modded versions of an operating system. I don't know if it were the mods or the 50 tons of bloatware on the machine but when I can't get a USB device to install, thats a serious issue. As for the bloatware, how about making most of it downloadable content? Most people have no need for most of the stuff you cram into the machine.
    So in closing, a disappointing experience so far. I hope the machine is problem free from this point on because I invested 7 hours in diagnosing, searching, pulling my hair out, reinstalling operating systems, etc. Now that the slate is clean, the thing works like a champ with my software.

    > 1) If you have released units to resellers of any product, there HAS to be driver support online. I never make backup discs as I've never had to. Every time I ever needed a driver, it was on the support site. There is no excuse for this. This product doesn't have a "release date". As a consumer, when I purchase something, I expect the support to be available when the product hits the shelves.
    Qosmio X505-Q875 belongs to Toshiba US series and the drivers should be downloaded from the Toshiba US page.
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
    There you can find everything regarding the Qosmio X505-Q875.
    > 2) In your "detailed" product specs, how about mentioning who supplied the wi-fi cards? Simply saying "Wi Fi Card" really isn't going to help anyone fishing for a driver. Thankfully, you guys haven't changed and it was still the RealTek wireless card.
    Qosmio X505-Q875 and other notebook series are equipped with different WLan cardsIntel, Atheros or Realtek. At the bottom of the unit you can find a label which contains a info what WLan card has been installed or go to device manger and check VendorID to get details about WLan chip manufacturer. ;)
    > 3) It is important that Windows be left as vanilla as possible, for people like myself who use these things for business. A lot of business productivity software does not like being installed on OEM modded versions of an operating system. I don't know if it were the mods or the 50 tons of bloatware on the machine but when I can't get a USB device to install, thats a serious issue. As for the bloatware, how about making most of it downloadable content? Most people have no need for most of the stuff you cram into the machine.
    Dont understand what you want to say and what you mean by bloatware but the point is that new generation notebooks supports a lot of different features which need to be controlled by software
    Of course you can remove everything what you want but you should not wonder if some feutures like FN buttons, multimedia buttons, face reorganization, power saving eco mode etc will not functions
    If you are not able to install the 3rd USB device then you should get in contact with this USB device manufacture. Maybe there are some Win 7 compatibility issues
    I installed Win 7 on my Toshiba notebook and everything is running like a dream all devices are recognized. I have managed to collect the Win 7 drivers at my own hand but this is not really a problem for common notebook user like me who know how to use google and search in internet
    Greets

  • [Solved] Random freezes on a Toshiba Qosmio X505-Q888

    Hi guys,
    My laptop has been freezing randomly, about once per day, during the last 2 or 3 weeks. The system freezes completely, i.e. the display freezes, I cannot move the mouse, I cannot use the keyboard, the CAPS LOCK light starts blinking, and if there is any music playing, it enters an infinite loop of 2-3 seconds. I cannot use any keyboard combination such as Ctrl+Alt+F1 to switch into a terminal. Then I have no choice but to press and hold the power button.
    The freezes seem to happen in a completely random fashion, independently from what programs/applications I am running, for how long the computer has been on, how much memory I am using, CPU temperature, etc. Also, I cannot find any clue in the log files. Everything seems to be OK just before the freeze (except for some random, annoying, but apparently unrelated messages such as "[system] Failed to activate service 'org.freedesktop.Avahi': timed out"). The only clue is that the CAPS LOCK key is blinking during the freeze, which means... kernel panic?
    I am running 64-bit Arch Linux on a Toshiba Qosmio X505-Q888. My current kernel is 3.4.2-2, but this has been happening since at least 3.3.7-1. I know another person with exactly the same laptop model as me, who is having the same issues. I am lost here. Any ideas?
    Thanks in advance!
    lspci output:
    00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
    00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
    00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
    00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
    00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
    00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
    00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
    00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
    00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05)
    00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
    00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 05)
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
    00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
    01:00.0 VGA compatible controller: NVIDIA Corporation GT215 [GeForce GTS 360M] (rev a2)
    01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
    07:00.0 FireWire (IEEE 1394): O2 Micro, Inc. 1394 OHCI Compliant Host Controller (rev 01)
    07:00.1 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)
    07:00.2 Mass storage controller: O2 Micro, Inc. Integrated MS/MSPRO/xD Controller (rev 01)
    0a:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10)
    0b:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0)
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
    ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
    ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
    ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
    ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
    ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
    ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
    ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
    ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
    ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
    ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
    ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
    ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
    lsmod output:
    Module Size Used by
    fuse 68768 2
    uvcvideo 69437 0
    videobuf2_vmalloc 2468 1 uvcvideo
    videobuf2_memops 2246 1 videobuf2_vmalloc
    snd_hda_codec_hdmi 23672 4
    videobuf2_core 20415 1 uvcvideo
    videodev 93086 1 uvcvideo
    media 10213 2 uvcvideo,videodev
    joydev 9991 0
    snd_hda_codec_conexant 46154 1
    snd_hda_intel 24053 6
    snd_hda_codec 94273 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
    arc4 1410 2
    snd_hwdep 6300 1 snd_hda_codec
    rtl8192se 60798 0
    snd_pcm 74958 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    sdhci_pci 10833 0
    rtlwifi 61929 1 rtl8192se
    nvidia 10832296 52
    sdhci 23854 1 sdhci_pci
    toshiba_acpi 12820 0
    snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
    sparse_keymap 3056 1 toshiba_acpi
    acpi_cpufreq 5933 1
    snd_timer 18966 1 snd_pcm
    mac80211 395232 2 rtlwifi,rtl8192se
    snd 58997 18 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
    mmc_core 82070 2 sdhci,sdhci_pci
    mperf 1267 1 acpi_cpufreq
    serio_raw 4653 0
    soundcore 5410 1 snd
    i2c_i801 8180 0
    wmi 8475 1 toshiba_acpi
    psmouse 70792 0
    processor 26567 1 acpi_cpufreq
    video 11307 0
    thermal 7959 0
    battery 6517 0
    ac 2376 0
    pcspkr 1899 0
    cfg80211 169978 2 mac80211,rtlwifi
    microcode 12185 0
    coretemp 5654 0
    iTCO_wdt 12813 0
    rfkill 15604 3 cfg80211,toshiba_acpi
    iTCO_vendor_support 1929 1 iTCO_wdt
    i7core_edac 17509 0
    edac_core 36656 1 i7core_edac
    crc32c_intel 1987 0
    firewire_ohci 31677 0
    firewire_core 51552 1 firewire_ohci
    atl1c 33030 0
    crc_itu_t 1363 1 firewire_core
    button 4502 0
    toshiba_bluetooth 2066 0
    i2c_core 20369 3 i2c_i801,nvidia,videodev
    evdev 9754 11
    vboxdrv 1792262 0
    loop 18160 0
    ext4 424175 4
    crc16 1359 1 ext4
    jbd2 73919 1 ext4
    mbcache 5977 1 ext4
    sr_mod 14823 0
    sd_mod 29239 6
    cdrom 35648 1 sr_mod
    usbhid 36430 0
    hid 85285 1 usbhid
    ahci 20549 5
    libahci 20023 1 ahci
    libata 167515 2 ahci,libahci
    ehci_hcd 41154 0
    scsi_mod 132942 3 libata,sd_mod,sr_mod
    usbcore 147533 5 uvcvideo,rtlwifi,ehci_hcd,usbhid
    usb_common 954 1 usbcore
    /var/log/dmesg.log:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.2-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 11 22:27:17 CEST 2012
    [ 0.000000] Command line: root=/dev/sda6 ro
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
    [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf282000 - 00000000bf3ec000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf3ec000 - 00000000bf40f000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf46f000 - 00000000bf470000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf470000 - 00000000bf4f1000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf4f1000 - 00000000bf70f000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf70f000 - 00000000bf718000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf718000 - 00000000bf71f000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf71f000 - 00000000bf782000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf782000 - 00000000bf79f000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf79f000 - 00000000bf7cc000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf7cc000 - 00000000bf7ff000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: TOSHIBA Qosmio X505/Qosmio X505, BIOS V2.60 06/11/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DBFFF uncachable
    [ 0.000000] DC000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 disabled
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 100000000 mask FC0000000 write-back
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000f6300] f6300
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
    [ 0.000000] 0000000000 - 00bf800000 page 2M
    [ 0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    [ 0.000000] 0100000000 - 0140000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 140000000 @ bf7c6000-bf7cc000
    [ 0.000000] RAMDISK: 37d21000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000f6230 00024 (v02 TOSQCI)
    [ 0.000000] ACPI: XSDT 00000000bf7eef64 00064 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000bf7ce000 000F4 (v03 INTEL CALPELLA 06040000 PTEC 00000001)
    [ 0.000000] ACPI: DSDT 00000000bf7cf000 0FBD2 (v02 TOSQCI CALPELLA 06040000 INTL 20060912)
    [ 0.000000] ACPI: FACS 00000000bf79bfc0 00040
    [ 0.000000] ACPI: HPET 00000000bf7fed32 00038 (v01 INTEL CALPELLA 06040000 PTEC 00000001)
    [ 0.000000] ACPI: MCFG 00000000bf7fed6a 0003C (v01 INTEL CALPELLA 06040000 PTEC 00000001)
    [ 0.000000] ACPI: APIC 00000000bf7feda6 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000bf7fee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000bf7fee8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
    [ 0.000000] ACPI: DMAR 00000000bf7df000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000bf7cd000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000140000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    [ 0.000000] NODE_DATA [000000013fffc000 - 000000013fffffff]
    [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00140000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009c
    [ 0.000000] 0: 0x00000100 -> 0x000bf27c
    [ 0.000000] 0: 0x000bf282 -> 0x000bf3ec
    [ 0.000000] 0: 0x000bf40f -> 0x000bf46f
    [ 0.000000] 0: 0x000bf70f -> 0x000bf718
    [ 0.000000] 0: 0x000bf71f -> 0x000bf782
    [ 0.000000] 0: 0x000bf79f -> 0x000bf7cc
    [ 0.000000] 0: 0x000bf7ff -> 0x000bf800
    [ 0.000000] 0: 0x00100000 -> 0x00140000
    [ 0.000000] On node 0 totalpages: 1045612
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 763168 pages, LIFO batch:31
    [ 0.000000] Normal zone: 4096 pages used for memmap
    [ 0.000000] Normal zone: 258048 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000bf27c000 - 00000000bf282000
    [ 0.000000] PM: Registered nosave memory: 00000000bf3ec000 - 00000000bf40f000
    [ 0.000000] PM: Registered nosave memory: 00000000bf46f000 - 00000000bf470000
    [ 0.000000] PM: Registered nosave memory: 00000000bf470000 - 00000000bf4f1000
    [ 0.000000] PM: Registered nosave memory: 00000000bf4f1000 - 00000000bf70f000
    [ 0.000000] PM: Registered nosave memory: 00000000bf718000 - 00000000bf71f000
    [ 0.000000] PM: Registered nosave memory: 00000000bf782000 - 00000000bf79f000
    [ 0.000000] PM: Registered nosave memory: 00000000bf7cc000 - 00000000bf7ff000
    [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
    [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000
    [ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
    [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82880 r8192 d23616 u262144
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1025127
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/sda6 ro
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 4035888k/5242880k available (4537k kernel code, 1060432k absent, 146560k reserved, 4308k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 1729.162 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3459.42 BogoMIPS (lpj=5763873)
    [ 0.000008] pid_max: default: 32768 minimum: 301
    [ 0.000037] Security Framework initialized
    [ 0.000042] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000393] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001416] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001859] Mount-cache hash table entries: 256
    [ 0.002086] Initializing cgroup subsys cpuacct
    [ 0.002089] Initializing cgroup subsys memory
    [ 0.002097] Initializing cgroup subsys devices
    [ 0.002099] Initializing cgroup subsys freezer
    [ 0.002101] Initializing cgroup subsys net_cls
    [ 0.002103] Initializing cgroup subsys blkio
    [ 0.002131] CPU: Physical Processor ID: 0
    [ 0.002133] CPU: Processor Core ID: 0
    [ 0.002139] mce: CPU supports 9 MCE banks
    [ 0.002149] CPU0: Thermal monitoring handled by SMI
    [ 0.002156] using mwait in idle threads.
    [ 0.003399] ACPI: Core revision 20120320
    [ 0.078006] ftrace: allocating 17820 entries in 70 pages
    [ 0.090499] DMAR: Host address width 36
    [ 0.090501] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
    [ 0.090510] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020e2
    [ 0.090513] DMAR: RMRR base: 0x000000bf6e9000 end: 0x000000bf6fefff
    [ 0.091060] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.124054] CPU0: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz stepping 05
    [ 0.229382] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
    [ 0.229388] CPU erratum AAJ80 worked around
    [ 0.229390] CPUID marked event: 'bus cycles' unavailable
    [ 0.229393] ... version: 3
    [ 0.229394] ... bit width: 48
    [ 0.229395] ... generic registers: 4
    [ 0.229397] ... value mask: 0000ffffffffffff
    [ 0.229399] ... max period: 000000007fffffff
    [ 0.229400] ... fixed-purpose events: 3
    [ 0.229402] ... event mask: 000000070000000f
    [ 0.249516] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.269397] Booting Node 0, Processors #1
    [ 0.280536] CPU1: Thermal monitoring handled by SMI
    [ 0.282640] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.292741] #2
    [ 0.303877] CPU2: Thermal monitoring handled by SMI
    [ 0.305984] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.319396] #3
    [ 0.330532] CPU3: Thermal monitoring handled by SMI
    [ 0.332638] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.342719] #4
    [ 0.353852] CPU4: Thermal monitoring handled by SMI
    [ 0.355956] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.366056] #5
    [ 0.377192] CPU5: Thermal monitoring handled by SMI
    [ 0.379301] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.392710] #6
    [ 0.403843] CPU6: Thermal monitoring handled by SMI
    [ 0.405953] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.416041] #7 Ok.
    [ 0.427172] CPU7: Thermal monitoring handled by SMI
    [ 0.429279] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.429317] Brought up 8 CPUs
    [ 0.429319] Total of 8 processors activated (27677.36 BogoMIPS).
    [ 0.435425] devtmpfs: initialized
    [ 0.436874] PM: Registering ACPI NVS region [mem 0xbf470000-0xbf4f0fff] (528384 bytes)
    [ 0.436887] PM: Registering ACPI NVS region [mem 0xbf782000-0xbf79efff] (118784 bytes)
    [ 0.437790] NET: Registered protocol family 16
    [ 0.437904] ACPI: bus type pci registered
    [ 0.437991] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.437995] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.511154] PCI: Using configuration type 1 for base access
    [ 0.511883] bio: create slab <bio-0> at 0
    [ 0.511944] ACPI: Added _OSI(Module Device)
    [ 0.511947] ACPI: Added _OSI(Processor Device)
    [ 0.511949] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.511951] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.514367] ACPI: EC: Look up EC in DSDT
    [ 0.516773] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.522616] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.523068] ACPI: SSDT 00000000bf71aa98 0032A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.523663] ACPI: Dynamic OEM Table Load:
    [ 0.523667] ACPI: SSDT (null) 0032A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.523844] ACPI: SSDT 00000000bf719018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.524426] ACPI: Dynamic OEM Table Load:
    [ 0.524429] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.524795] ACPI: SSDT 00000000bf71a718 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.525430] ACPI: Dynamic OEM Table Load:
    [ 0.525433] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.525614] ACPI: SSDT 00000000bf718d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.526223] ACPI: Dynamic OEM Table Load:
    [ 0.526226] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.592282] ACPI: Interpreter enabled
    [ 0.592285] ACPI: (supports S0 S3 S4 S5)
    [ 0.592311] ACPI: Using IOAPIC for interrupt routing
    [ 0.598233] ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
    [ 0.598514] ACPI: No dock devices found.
    [ 0.598518] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.598955] \_SB_.PCI0:_OSC invalid UUID
    [ 0.598957] _OSC request data:1 8 1f
    [ 0.598961] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.599649] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.599652] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.599655] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.599658] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.599660] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.599663] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.599666] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
    [ 0.599705] PCI host bridge to bus 0000:00
    [ 0.599708] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.599710] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.599713] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.599715] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.599717] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.599720] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.599722] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
    [ 0.599734] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
    [ 0.599797] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
    [ 0.599854] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    [ 0.599882] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
    [ 0.599947] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
    [ 0.600011] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
    [ 0.600073] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
    [ 0.600134] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
    [ 0.600183] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
    [ 0.600275] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 0.600302] pci 0000:00:1a.0: reg 10: [mem 0xf0906000-0xf09063ff]
    [ 0.600404] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.600445] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 0.600466] pci 0000:00:1b.0: reg 10: [mem 0xf0900000-0xf0903fff 64bit]
    [ 0.600545] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.600582] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 0.600664] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.600704] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
    [ 0.600786] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.600823] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
    [ 0.600906] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.600940] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
    [ 0.601022] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 0.601061] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 0.601088] pci 0000:00:1d.0: reg 10: [mem 0xf0907000-0xf09073ff]
    [ 0.601190] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.601230] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.601314] pci 0000:00:1f.0: [8086:3b03] type 00 class 0x060100
    [ 0.601463] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
    [ 0.601488] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837]
    [ 0.601501] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827]
    [ 0.601514] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f]
    [ 0.601527] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823]
    [ 0.601541] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f]
    [ 0.601554] pci 0000:00:1f.2: reg 24: [mem 0xf0908000-0xf09087ff]
    [ 0.601612] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.601644] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 0.601665] pci 0000:00:1f.3: reg 10: [mem 0xf0909000-0xf09090ff 64bit]
    [ 0.601692] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
    [ 0.601781] pci 0000:01:00.0: [10de:0cb1] type 00 class 0x030000
    [ 0.601793] pci 0000:01:00.0: reg 10: [mem 0xcc000000-0xccffffff]
    [ 0.601805] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.601818] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
    [ 0.601827] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
    [ 0.601836] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
    [ 0.601895] pci 0000:01:00.1: [10de:0be4] type 00 class 0x040300
    [ 0.601907] pci 0000:01:00.1: reg 10: [mem 0xcdefc000-0xcdefffff]
    [ 0.602005] pci 0000:00:03.0: PCI bridge to [bus 01-01]
    [ 0.602009] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 0.602013] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff]
    [ 0.602018] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.602068] pci 0000:00:1c.0: PCI bridge to [bus 02-04]
    [ 0.602077] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.602086] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
    [ 0.602097] pci 0000:00:1c.0: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
    [ 0.602174] pci 0000:07:00.0: [1217:10f7] type 00 class 0x0c0010
    [ 0.602196] pci 0000:07:00.0: reg 10: [mem 0x00000000-0x00000fff]
    [ 0.602327] pci 0000:07:00.0: supports D1 D2
    [ 0.602329] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.602380] pci 0000:07:00.1: [1217:8120] type 00 class 0x080501
    [ 0.602402] pci 0000:07:00.1: reg 10: [mem 0xf0501000-0xf05010ff]
    [ 0.602533] pci 0000:07:00.1: supports D1 D2
    [ 0.602535] pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.602597] pci 0000:07:00.2: [1217:8130] type 00 class 0x018000
    [ 0.602619] pci 0000:07:00.2: reg 10: [mem 0xf0503000-0xf0503fff]
    [ 0.602647] pci 0000:07:00.2: reg 18: [mem 0xf0502000-0xf05027ff]
    [ 0.602758] pci 0000:07:00.2: supports D1 D2
    [ 0.602760] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.612633] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
    [ 0.612644] pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.612728] pci 0000:0a:00.0: [10ec:8172] type 00 class 0x028000
    [ 0.612750] pci 0000:0a:00.0: reg 10: [io 0x4000-0x40ff]
    [ 0.612767] pci 0000:0a:00.0: reg 14: [mem 0xf0600000-0xf0603fff]
    [ 0.612884] pci 0000:0a:00.0: supports D1 D2
    [ 0.612887] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.622602] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
    [ 0.622621] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
    [ 0.622630] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf06fffff]
    [ 0.622707] pci 0000:0b:00.0: [1969:1063] type 00 class 0x020000
    [ 0.622736] pci 0000:0b:00.0: reg 10: [mem 0xf0400000-0xf043ffff 64bit]
    [ 0.622753] pci 0000:0b:00.0: reg 18: [io 0x5000-0x507f]
    [ 0.622870] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.632604] pci 0000:00:1c.6: PCI bridge to [bus 0b-0b]
    [ 0.632622] pci 0000:00:1c.6: bridge window [io 0x5000-0x5fff]
    [ 0.632631] pci 0000:00:1c.6: bridge window [mem 0xf0400000-0xf04fffff]
    [ 0.632711] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
    [ 0.632725] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.632728] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.632731] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.632733] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 0.632736] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.632739] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.632742] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
    [ 0.632778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.632953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
    [ 0.633024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.633153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.633220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 0.633284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.633347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
    [ 0.633449] \_SB_.PCI0:_OSC invalid UUID
    [ 0.633451] _OSC request data:1 1f 1f
    [ 0.633455] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.633495] \_SB_.PCI0:_OSC invalid UUID
    [ 0.633497] _OSC request data:1 0 1d
    [ 0.633501] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
    [ 0.633503] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.639419] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
    [ 0.639461] PCI host bridge to bus 0000:ff
    [ 0.639468] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
    [ 0.639491] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
    [ 0.639516] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
    [ 0.639537] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
    [ 0.639560] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
    [ 0.639582] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
    [ 0.639605] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
    [ 0.639628] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
    [ 0.639649] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
    [ 0.639670] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
    [ 0.639691] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
    [ 0.639714] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
    [ 0.639735] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
    [ 0.639757] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
    [ 0.639779] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
    [ 0.639820] pci0000:ff: Requesting ACPI _OSC control (0x1d)
    [ 0.639823] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.639825] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.640363] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.640427] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.640488] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 0.640549] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    [ 0.640609] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.640673] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.640735] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [ 0.640799] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 0.640906] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.640915] vgaarb: loaded
    [ 0.640916] vgaarb: bridge control possible 0000:01:00.0
    [ 0.640960] PCI: Using ACPI for IRQ routing
    [ 0.647549] PCI: pci_cache_line_size set to 64 bytes
    [ 0.647793] reserve RAM buffer: 000000000009c400 - 000000000009ffff
    [ 0.647795] reserve RAM buffer: 00000000bf27c000 - 00000000bfffffff
    [ 0.647800] reserve RAM buffer: 00000000bf3ec000 - 00000000bfffffff
    [ 0.647804] reserve RAM buffer: 00000000bf46f000 - 00000000bfffffff
    [ 0.647807] reserve RAM buffer: 00000000bf718000 - 00000000bfffffff
    [ 0.647810] reserve RAM buffer: 00000000bf782000 - 00000000bfffffff
    [ 0.647813] reserve RAM buffer: 00000000bf7cc000 - 00000000bfffffff
    [ 0.647816] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
    [ 0.647914] NetLabel: Initializing
    [ 0.647916] NetLabel: domain hash size = 128
    [ 0.647917] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.647930] NetLabel: unlabeled traffic allowed by default
    [ 0.647984] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
    [ 0.647994] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
    [ 0.648001] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.652683] hpet: hpet2 irq 40 for MSI
    [ 0.655983] hpet: hpet3 irq 41 for MSI
    [ 0.659437] hpet: hpet4 irq 42 for MSI
    [ 0.662806] hpet: hpet5 irq 43 for MSI
    [ 0.666188] hpet: hpet6 irq 44 for MSI
    [ 0.679597] Switching to clocksource hpet
    [ 0.685694] pnp: PnP ACPI init
    [ 0.685711] ACPI: bus type pnp registered
    [ 0.686108] pnp 00:00: [bus 00-fe]
    [ 0.686111] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.686113] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.686115] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.686118] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.686120] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.686123] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.686125] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.686127] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.686129] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.686132] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.686134] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.686136] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.686138] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.686140] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.686143] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.686145] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.686147] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.686149] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
    [ 0.686152] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.686215] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.686395] pnp 00:01: [io 0x0000-0x001f]
    [ 0.686423] pnp 00:01: [io 0x0081-0x0091]
    [ 0.686425] pnp 00:01: [io 0x0093-0x009f]
    [ 0.686426] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.686429] pnp 00:01: [dma 4]
    [ 0.686461] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.686568] pnp 00:02: [irq 0 disabled]
    [ 0.686578] pnp 00:02: [irq 8]
    [ 0.686580] pnp 00:02: [mem 0xfed00000-0xfed003ff]
    [ 0.686614] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.686626] pnp 00:03: [io 0x00f0]
    [ 0.686635] pnp 00:03: [irq 13]
    [ 0.686664] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.686677] pnp 00:04: [io 0x002e-0x002f]
    [ 0.686679] pnp 00:04: [io 0x004e-0x004f]
    [ 0.686681] pnp 00:04: [io 0x0061]
    [ 0.686683] pnp 00:04: [io 0x0063]
    [ 0.686684] pnp 00:04: [io 0x0065]
    [ 0.686686] pnp 00:04: [io 0x0067]
    [ 0.686688] pnp 00:04: [io 0x0068]
    [ 0.686692] pnp 00:04: [io 0x006c]
    [ 0.686693] pnp 00:04: [io 0x0070]
    [ 0.686695] pnp 00:04: [io 0x0080]
    [ 0.686697] pnp 00:04: [io 0x0092]
    [ 0.686699] pnp 00:04: [io 0x00b2-0x00b3]
    [ 0.686701] pnp 00:04: [io 0x03e0-0x03e1]
    [ 0.686703] pnp 00:04: [io 0x0680-0x069f]
    [ 0.686704] pnp 00:04: [io 0x0500-0x050f]
    [ 0.686706] pnp 00:04: [io 0x0600-0x0603]
    [ 0.686708] pnp 00:04: [io 0xffff]
    [ 0.686710] pnp 00:04: [io 0x0400-0x047f]
    [ 0.686712] pnp 00:04: [io 0x1180-0x11ff]
    [ 0.686714] pnp 00:04: [io 0x164e-0x164f]
    [ 0.686716] pnp 00:04: [io 0xfe00]
    [ 0.686787] system 00:04: [io 0x03e0-0x03e1] has been reserved
    [ 0.686790] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.686792] system 00:04: [io 0x0500-0x050f] has been reserved
    [ 0.686795] system 00:04: [io 0x0600-0x0603] has been reserved
    [ 0.686798] system 00:04: [io 0xffff] has been reserved
    [ 0.686801] system 00:04: [io 0x0400-0x047f] has been reserved
    [ 0.686803] system 00:04: [io 0x1180-0x11ff] has been reserved
    [ 0.686806] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.686808] system 00:04: [io 0xfe00] has been reserved
    [ 0.686812] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.686855] pnp 00:05: [io 0x0070-0x0077]
    [ 0.686887] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.687090] pnp 00:06: [io 0x0060]
    [ 0.687092] pnp 00:06: [io 0x0064]
    [ 0.687102] pnp 00:06: [irq 1]
    [ 0.687136] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.687159] pnp 00:07: [irq 12]
    [ 0.687192] pnp 00:07: Plug and Play ACPI device, IDs SYN102f SYN1000 SYN0002 PNP0f13 (active)
    [ 0.687294] pnp 00:08: [mem 0xf0501100-0xf05013ff]
    [ 0.687304] pnp 00:08: disabling [mem 0xf0501100-0xf05013ff] because it overlaps 0000:00:1c.3 BAR 14 [mem 0xf0500000-0xf05fffff]
    [ 0.687363] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.687680] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [ 0.687682] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.687685] pnp 00:09: [mem 0xfed1b000-0xfed1bfff]
    [ 0.687687] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.687689] pnp 00:09: [mem 0xe0000000-0xefffffff]
    [ 0.687692] pnp 00:09: [mem 0xf090a000-0xf090afff]
    [ 0.687694] pnp 00:09: [mem 0xc0000000-0xc0000fff]
    [ 0.687696] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
    [ 0.687698] pnp 00:09: [mem 0xfed90000-0xfed93fff]
    [ 0.687700] pnp 00:09: [mem 0xfed40000-0xfed44fff]
    [ 0.687702] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
    [ 0.687704] pnp 00:09: [mem 0xff808000-0xff8080ff]
    [ 0.687706] pnp 00:09: [mem 0xff000000-0xffffffff]
    [ 0.687708] pnp 00:09: [mem 0xfee00000-0xfeefffff]
    [ 0.687789] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.687792] system 00:09: [mem 0xfed1b000-0xfed1bfff] has been reserved
    [ 0.687795] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.687798] system 00:09: [mem 0xf090a000-0xf090afff] has been reserved
    [ 0.687801] system 00:09: [mem 0xc0000000-0xc0000fff] has been reserved
    [ 0.687804] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.687807] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.687809] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.687812] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.687815] system 00:09: [mem 0xff808000-0xff8080ff] has been reserved
    [ 0.687818] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.687821] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.687825] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.687979] pnp 00:0a: [bus ff]
    [ 0.688027] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.688111] pnp: PnP ACPI: found 11 devices
    [ 0.688112] ACPI: ACPI bus type pnp unregistered
    [ 0.695455] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 07-07] add_size 1000
    [ 0.695460] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07-07] add_size 200000
    [ 0.695474] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a-0a] add_size 200000
    [ 0.695489] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b-0b] add_size 200000
    [ 0.695507] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.695511] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.695514] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.695517] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.695523] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
    [ 0.695528] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0300000-0xc04fffff 64bit pref]
    [ 0.695532] pci 0000:00:1c.6: BAR 15: assigned [mem 0xc0500000-0xc06fffff 64bit pref]
    [ 0.695536] pci 0000:00:1c.3: BAR 13: assigned [io 0x6000-0x6fff]
    [ 0.695540] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
    [ 0.695544] pci 0000:00:03.0: PCI bridge to [bus 01-01]
    [ 0.695547] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 0.695552] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff]
    [ 0.695556] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.695561] pci 0000:00:1c.0: PCI bridge to [bus 02-04]
    [ 0.695566] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.695576] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
    [ 0.695585] pci 0000:00:1c.0: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
    [ 0.695597] pci 0000:07:00.0: BAR 0: assigned [mem 0xf0500000-0xf0500fff]
    [ 0.695606] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
    [ 0.695614] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
    [ 0.695623] pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.695632] pci 0000:00:1c.3: bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
    [ 0.695643] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
    [ 0.695651] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
    [ 0.695661] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf06fffff]
    [ 0.695670] pci 0000:00:1c.4: bridge window [mem 0xc0300000-0xc04fffff 64bit pref]
    [ 0.695681] pci 0000:00:1c.6: PCI bridge to [bus 0b-0b]
    [ 0.695689] pci 0000:00:1c.6: bridge window [io 0x5000-0x5fff]
    [ 0.695699] pci 0000:00:1c.6: bridge window [mem 0xf0400000-0xf04fffff]
    [ 0.695708] pci 0000:00:1c.6: bridge window [mem 0xc0500000-0xc06fffff 64bit pref]
    [ 0.695719] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
    [ 0.695810] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.695819] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.695822] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.695824] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.695827] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.695829] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.695832] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.695834] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
    [ 0.695837] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.695839] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
    [ 0.695842] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.695844] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 0.695847] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf03fffff]
    [ 0.695849] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref]
    [ 0.695852] pci_bus 0000:07: resource 0 [io 0x6000-0x6fff]
    [ 0.695854] pci_bus 0000:07: resource 1 [mem 0xf0500000-0xf05fffff]
    [ 0.695857] pci_bus 0000:07: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
    [ 0.695860] pci_bus 0000:0a: resource 0 [io 0x4000-0x4fff]
    [ 0.695862] pci_bus 0000:0a: resource 1 [mem 0xf0600000-0xf06fffff]
    [ 0.695865] pci_bus 0000:0a: resource 2 [mem 0xc0300000-0xc04fffff 64bit pref]
    [ 0.695867] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff]
    [ 0.695870] pci_bus 0000:0b: resource 1 [mem 0xf0400000-0xf04fffff]
    [ 0.695872] pci_bus 0000:0b: resource 2 [mem 0xc0500000-0xc06fffff 64bit pref]
    [ 0.695875] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
    [ 0.695877] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
    [ 0.695880] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.695882] pci_bus 0000:0c: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.695885] pci_bus 0000:0c: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.695887] pci_bus 0000:0c: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.695889] pci_bus 0000:0c: resource 10 [mem 0xc0000000-0xfebfffff]
    [ 0.695937] NET: Registered protocol family 2
    [ 0.696062] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.696834] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.700123] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.700521] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.700523] TCP: reno registered
    [ 0.700532] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.700576] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.700689] NET: Registered protocol family 1
    [ 0.700925] pci 0000:01:00.0: Boot video device
    [ 0.700998] PCI: CLS 64 bytes, default 64
    [ 0.701042] Unpacking initramfs...
    [ 0.770927] Freeing initrd memory: 2876k freed
    [ 0.771345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.771348] Placing 64MB software IO TLB between ffff8800bb27c000 - ffff8800bf27c000
    [ 0.771350] software IO TLB at phys 0xbb27c000 - 0xbf27c000
    [ 0.771376] Simple Boot Flag at 0x36 set to 0x1
    [ 0.772092] audit: initializing netlink socket (disabled)
    [ 0.772103] type=2000 audit(1340054803.739:1): initialized
    [ 0.772500] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.774515] VFS: Disk quotas dquot_6.5.2
    [ 0.774565] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.774667] msgmni has been set to 7888
    [ 0.774904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.774945] io scheduler noop registered
    [ 0.774947] io scheduler deadline registered
    [ 0.775005] io scheduler cfq registered (default)
    [ 0.775409] intel_idle: MWAIT substates: 0x1120
    [ 0.775425] intel_idle: v0.4 model 0x1E
    [ 0.775426] intel_idle: lapic_timer_reliable_states 0x2
    [ 0.775522] GHES: HEST is not enabled!
    [ 0.775587] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.776198] Linux agpgart interface v0.103
    [ 0.776298] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.778912] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.780103] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.780135] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.780159] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.780182] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.780206] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.780325] mousedev: PS/2 mouse device common for all mice
    [ 0.780386] rtc_cmos 00:05: RTC can wake from S4
    [ 0.780540] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.780579] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.780731] cpuidle: using governor ladder
    [ 0.780936] cpuidle: using governor menu
    [ 0.781081] TCP: cubic registered
    [ 0.781191] NET: Registered protocol family 10
    [ 0.781396] NET: Registered protocol family 17
    [ 0.781401] Registering the dns_resolver key type
    [ 0.781617] PM: Hibernation image not present or could not be loaded.
    [ 0.781628] registered taskstats version 1
    [ 0.782385] rtc_cmos 00:05: setting system clock to 2012-06-18 21:26:43 UTC (1340054803)
    [ 0.782538] Initializing network drop monitor service
    [ 0.787227] Freeing unused kernel memory: 740k freed
    [ 0.787390] Write protecting the kernel read-only data: 8192k
    [ 0.798480] Freeing unused kernel memory: 1588k freed
    [ 0.803291] Freeing unused kernel memory: 640k freed
    [ 0.809999] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.820218] udevd[71]: starting version 185
    [ 0.862439] usbcore: registered new interface driver usbfs
    [ 0.862464] usbcore: registered new interface driver hub
    [ 0.862584] usbcore: registered new device driver usb
    [ 0.864859] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.864926] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.864935] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 0.864962] SCSI subsystem initialized
    [ 0.864965] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.865005] ehci_hcd 0000:00:1a.0: debug port 2
    [ 0.869004] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.869030] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0906000
    [ 0.871261] libata version 3.00 loaded.
    [ 0.876370] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.876586] hub 1-0:1.0: USB hub found
    [ 0.876591] hub 1-0:1.0: 3 ports detected
    [ 0.876821] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.876830] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 0.876839] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.876872] ehci_hcd 0000:00:1d.0: debug port 2
    [ 0.880874] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.880892] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0907000
    [ 0.889704] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.890152] hub 2-0:1.0: USB hub found
    [ 0.890161] hub 2-0:1.0: 3 ports detected
    [ 0.890447] ahci 0000:00:1f.2: version 3.0
    [ 0.890546] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
    [ 0.890615] ahci: SSS flag set, parallel bus scan disabled
    [ 0.890674] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x39 impl SATA mode
    [ 0.890686] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
    [ 0.890697] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.911919] scsi0 : ahci
    [ 0.912284] scsi1 : ahci
    [ 0.912722] scsi2 : ahci
    [ 0.913201] scsi3 : ahci
    [ 0.913668] scsi4 : ahci
    [ 0.914080] scsi5 : ahci
    [ 0.914267] ata1: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908100 irq 45
    [ 0.914274] ata2: DUMMY
    [ 0.914277] ata3: DUMMY
    [ 0.914288] ata4: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908280 irq 45
    [ 0.914297] ata5: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908300 irq 45
    [ 0.914305] ata6: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908380 irq 45
    [ 1.183077] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.233004] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.234228] ata1.00: ATA-8: Hitachi HTS725050A9A360, PC4OC71E, max UDMA/133
    [ 1.234236] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.235728] ata1.00: configured for UDMA/133
    [ 1.236338] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72505 PC4O PQ: 0 ANSI: 5
    [ 1.307636] hub 1-1:1.0: USB hub found
    [ 1.307879] hub 1-1:1.0: 6 ports detected
    [ 1.416267] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.540814] hub 2-1:1.0: USB hub found
    [ 1.540943] hub 2-1:1.0: 8 ports detected
    [ 1.556222] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.609698] usb 1-1.6: new high-speed USB device number 3 using ehci_hcd
    [ 1.696049] hub 1-1.6:1.0: USB hub found
    [ 1.696420] hub 1-1.6:1.0: 4 ports detected
    [ 1.772758] Refined TSC clocksource calibration: 1728.999 MHz.
    [ 1.772767] Switching to clocksource tsc
    [ 1.806556] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
    [ 1.876031] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.877305] ata5.00: ATAPI: MATSHITABD-CMB UJ141EL, 1.00, max UDMA/100
    [ 1.879554] ata5.00: configured for UDMA/100
    [ 1.885075] scsi 4:0:0:0: CD-ROM MATSHITA BD-CMB UJ141EL 1.00 PQ: 0 ANSI: 5
    [ 1.963102] usb 1-1.6.3: new low-speed USB device number 4 using ehci_hcd
    [ 2.081481] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.3/1-1.6.3:1.0/input/input1
    [ 2.081639] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1.6.3/input0
    [ 2.087742] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.3/1-1.6.3:1.1/input/input2
    [ 2.087898] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1.6.3/input1
    [ 2.087938] usbcore: registered new interface driver usbhid
    [ 2.087942] usbhid: USB HID core driver
    [ 2.122996] usb 1-1.6.4: new full-speed USB device number 5 using ehci_hcd
    [ 2.202563] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.212058] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.212151] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.212155] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.212192] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.212943] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.4/1-1.6.4:1.0/input/input3
    [ 2.213029] generic-usb 0003:1532:0016.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1a.0-1.6.4/input0
    [ 2.216135] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.216142] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.216400] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 2.289258] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
    [ 2.292307] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.310870] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.444092] udevd[177]: starting version 185
    [ 5.002214] loop: module loaded
    [ 5.065477] vboxdrv: Found 8 processor cores.
    [ 5.066064] VBoxDrv: dbg - g_abExecMemory=ffffffffa01d0080
    [ 5.068417] vboxdrv: fAsync=0 offMin=0x19f offMax=0x349c9
    [ 5.068586] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 5.068591] vboxdrv: Successfully loaded version 4.1.16_OSE (interface 0x00190000).
    [ 5.281919] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
    [ 5.291812] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    [ 5.291980] ACPI: Power Button [PWRB]
    [ 5.292078] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
    [ 5.293167] ACPI: Lid Switch [LID]
    [ 5.293233] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    [ 5.293269] ACPI: Power Button [PWRF]
    [ 5.337928] firewire_ohci 0000:07:00.0: enabling device (0104 -> 0106)
    [ 5.391330] firewire_ohci 0000:07:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
    [ 5.392558] EDAC MC: Ver: 2.1.0
    [ 5.393911] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
    [ 5.403663] iTCO_vendor_support: vendor-support=0
    [ 5.414889] atl1c 0000:0b:00.0: version 1.0.1.0-NAPI
    [ 5.420966] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 5.421163] iTCO_wdt: Found a PM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 5.421406] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 5.486165] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.489677] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.493598] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.494085] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.494588] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.494973] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.495403] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.495752] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.496144] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.496599] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 5.505428] input: PC Speaker as /devices/platform/pcspkr/input/input7
    [ 5.522793] ACPI: AC Adapter [ACAD] (on-line)
    [ 5.523752] acpi device:02: registered as cooling_device0
    [ 5.523855] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
    [ 5.523909] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 5.526016] ACPI: Requesting acpi_cpufreq
    [ 5.536953] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
    [ 5.536961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 5.626562] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.626568] ACPI: Thermal Zone [THRM] (58 C)
    [ 5.891343] firewire_core 0000:07:00.0: created device fw0: GUID 01cf13fe00000700, S400
    [ 5.971026] ACPI: Battery Slot [BAT1] (battery present)
    [ 5.972094] wmi: Mapper loaded
    [ 6.108672] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
    [ 6.113558] input: Toshiba input device as /devices/virtual/input/input9
    [ 6.124400] sdhci: Secure Digital Host Controller Interface driver
    [ 6.124402] sdhci: Copyright(c) Pierre Ossman
    [ 6.172992] nvidia: module license 'NVIDIA' taints kernel.
    [ 6.172995] Disabling lock debugging due to kernel taint
    [ 6.181396] nvidia 0000:01:00.0: power state changed by ACPI to D0
    [ 6.181403] nvidia 0000:01:00.0: power state changed by ACPI to D0
    [ 6.181419] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 6.181624] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12 16:03:22 PDT 2012
    [ 6.186591] Registered led device: toshiba::illumination
    [ 6.190693] sdhci-pci 0000:07:00.1: SDHCI controller found [1217:8120] (rev 1)
    [ 6.190943] Registered led device: mmc0::
    [ 6.192014] mmc0: SDHCI controller on PCI [0000:07:00.1] using ADMA
    [ 6.228634] rtl8192se: FW Power Save off (module option)
    [ 6.228664] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
    [ 6.228665] Loading firmware rtlwifi/rtl8192sefw.bin
    [ 6.251712] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [ 6.262400] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 6.317500] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
    [ 6.320857] hda_intel: Disabling MSI
    [ 6.427141] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1e0b1, caps: 0xd04733/0xa40000/0xa0000
    [ 6.469682] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
    [ 6.717972] Linux media interface: v0.10
    [ 6.729300] Linux video capture interface: v2.00
    [ 6.997745] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b130)
    [ 7.020114] input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input12
    [ 7.020201] usbcore: registered new interface driver uvcvideo
    [ 7.020204] USB Video Class driver (1.1.1)
    [ 7.153982] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
    [ 7.154292] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
    [ 7.154446] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
    [ 7.154578] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16
    [ 13.241349] EXT4-fs (sda6): re-mounted. Opts: (null)
    [ 13.273608] EXT4-fs (sda5): mounted fi

    nTia89 wrote:try to downgrade the kernel with a working version
    Thanks for your reply! Actually, yesterday I upgraded to the new kernel (version 3.4.3-1) and my laptop has not freezed since then. So, maybe I will wait for a couple of days and hopefully mark this as solved.

  • Toshiba Qosmio X505 plugged in, not charging message

    I have a Toshiba Qosmio X505 that is almost 4 years old and have some power issues.  The battery is drained to about 6% and the battery icon in the tool bar has the plug symbol for a second then it goes away then comes back and goes away.... it keeps flashing like this.  When I move the mouse over the battery icon it says plugged in, not charging.  I have tried every solution I have found on line with no luck.  I have removed the battery and ac charger and then held the power button for 30 seconds, I have cleaned the connections, I have re-installed the battery about 10 times, I have rebooted all to no avail.
    When I remove the ac adapter the power light is off and the battery light is orange.  When I remove the battery and plug in the ac adapter the power light is steady red.  As soon as I put the battery in the ac power light begins to blink on and off.  The computer does not power on with the battery removed and the ac adapter plugged in (but I'm not sure if it's supposed to). I will also add that in the last week or so when I power on I would get a black screen saying an NTFS file is bad and the machine wants to do a disk check.  The disk check never runs, even when I try to do it manually.
    I have read this could be a motherboard issue, an ac adapter issue, or a battery issue.  I am hopoing a replacement battery fixes the problem.  Before buying a battery I was hoping someone had some info to share.  Thanks

    I bought a battery hoping that takes care of the problem.  If that doesn't work I will try a new adapter and if that doesn't work I will probably just remove the hard drive and use it as an external on a new machine.  Seems there really isn't a whole lot of info out there about this problem other than the start button solution. 

  • Qosmio X505 - Q870 Freezing Problem PLS HELP !!!

    hello everyone
    i have toshiba qosmio x505 q870 with nvidia gts 360m. core i7 q720 @1.6
    i have this strange problem .. the laptop freezes recently alot that im not being to use it, it happens not in particular situation .. it may happen in any time in anything you are doing. last time happened, i was logging in.
    i wish to know whats the problem .. after freezing the only thing that i can do is ahard shut down by keep pressing the power button.
    i tried mem test to check the rams .. no errors i have 8gb ram.
    i tried scanning the hard disk for bad sectors .. also nth, i have 128 gb ssd
    ( the laptop came with 500gb hitachi 7200rpm, i added SSD 128gb Kingston later )
    and another 500gb seagate 7200 rpm.
    i tried replacing rams .. still happening.
    i used the laptop without battery only on power still happening.
    i used the battery alone also happened.
    i changed the windows copy yes it freezed.
    some times when it happens i take off the battery and take of the rams and keep pressing the power button to reset the laptop thing about electricity, thats what they told me .
    Then it will happen but after awhile. one time i did this thing:
    i disassembled the laptop with eveything out and did a cleaning for eveyrhing ( bearing in mind it wasnt full of dust or anything it was clean ) and then reinstalled everything in place.
    That was a while ago..
    After that it took awhile before rehappening, something about a month . and one time happened during the installtion of windows =S
    i tried eveything .. i updated all the drivers, uninstall reinstall, i did a recovery i did eveything with no results no over heating problems
    i asked the support center and they didnt figure out whats causing. they did not figure out the problem soo... to show me that they are a good costumer care center they told me that they want to replace :
    1. motherboard 280 $
    2. graphic card 600 $
    3. 2 x 4 gb ram 100 $
    4. HDD 70 $
    the laptop is out of warranty and im sure i wont do such a thing ..
    all of that to be replaced just because they did not figure out.
    and im the one whos gonna cry !
    im sure that this solution is not the right one.
    i tried four different HDD same result and as i mentioned .. one of them was during the installation of windows during the recovery ...
    i almost tried eveything i tried to run with one memory module, then the other module, and see if either provides more stability. For clarity, let's call one RAM 1 and the other RAM 2. and i have two slots; call them slot 1 and slot 2. Try RAM 1 in slot 1 with slot 2 empty. If that does not allow the system to work well, try RAM 1 in slot 2 with slot 1 empty. If that does not provide more stability, try RAM 2 in slot 1 with slot 2 empty. If that still is not stable, try RAM 2 in slot 2 with slot 1 empty. still freezing =(
    Plus .. i tried 8 different rams modules 1 in 1 , 1 in 2, 2 in 1, 2 in 2 and goes on .. etc .. still freezing .. i tried eveything humanty can do ..
    i guess im gonna buy a robot and let him set, think, work, and figure out whats causing ..
    after all im guessing its sth about electricity .. i think thats theres atiny black thing in the motherboard causing loose or giving more static or delivering more or less electricity to some parts or anything like this .
    who knows ... my humanty after i did all that made think like this .. or lets say its BY LOGIC .. Please Anyone can Help ... !!
    anyone can help =( im disperate

    A FIX THAT WORKS SO FAR!
    I have a x505 - q870 myself and have had problems with freezing for a long time - till a few days ago, it began to freeze at random times even 15 minutes after boot, making the laptop unusable. I use a cooling pad, and that didn't help either. I thought it maybe a corrupt OS, bad memory or a heating problem.
    I found this toshiba form post and on advice decided to unseat and reseat the CMOS battery. WARNING: this takes time and patience, you have to disassemble the entire laptop to get to the motherboard. I'll attach an X505 service manual that I found a while ago.
    While getting to the CMOS battery, I also discovered that the fans had a carpet layer of dust/lint covering the rear vents (after 2 years heavy travel and use). I cleaned these out (with air), unseated and reseated the battery, and reassembled the laptop. You will have to update system time on first boot. VOILA! I have had the laptop working for two days now, no freezing yet! I am guessing a couple of reasons:
    1. Hard resetting the motherboard did something magical - worth a try.
    2. Cleaning dirt blocking vents under the motherboard definitely helped heating issues. You may not have this problem. But in any case, do you use a cooling pad?
    If you are out of warranty (like me) and have some technical knowledge, I suggest you give this a try. Since I did this I have not had a freeze yet after constant use! This after having repeated freezes every hour of use is definitely an improvement.
    Attachments:
    x505 manual.pdf ‏6441 KB

  • Qosmio x505 disks damaged?

    i would like to believe this in something to do with my computer and not the error of the disk suppliers
    here is a copy of what i wrote in the survey that came along with the second set of these disks I order:
    Qosmio X505 Recovery media disks 64bit:
    me and my wife have ordered these recovery disks twice now. In the First set the 2 of 3 disk was severely damage. The second set the 1 of 3 disk was undamaged at a glance but upon using it i got a reoccurring error. Using the first 1 of 3 disk if gotten to the "Recovery of factory default, Preparing, copying files" stage of disk 2 of 3 <second set>. However its been on this stage for a whole day so i don't think its working. I haven't even had the opportunity to use either of the 3 of 3 disks.
    Summery of recovery disks ordered:
    Set 1. Disk 1 <works>, Disk 2 <major physical damage>, Disk 3 <???>
    Set 2. Disk 1 <error>, Disk 2 <copying files 24hrs?>, Disk 3 <???>
    <end>
    also on a side note assuming that maybe it was maybe an issue with the hard drive. i tried installing it on different hard drives with custom partion sizes. i know its not the CD rom because it does work for at least one of the disks.

    i had to reformat , to those who own the same laptop here is a copy of the mbr
    Partition table for \\.\PhysicalDrive0
    # Boot StartCyl StartHead StartSect EndCyl EndHead EndSect RelSect TotSect Type
    0 Yes 33 32 0 538 89 63 2048 3072000 Unknown file system
    1 No 539 89 63 1023 254 63 3074048 949903360 NTFS
    2 No 1023 254 63 1023 254 63 952977408 23795712 Unknown file system
    3 No 0 0 0 0 0 0 0 0 Unknown file system
    # : Partition number
    Boot : Is this partition marked as bootable?
    StartCyl : Start cylinder
    StartHead : Start head
    StartSect : Start sector
    EndCyl : End cylinder
    EndHead : End head
    EndSect : End sector
    RelSect : Number of sectors between MBR and first sector of the partition
    TotSect : Total number of sectors in partition
    Type : Type of partition

  • Toshiba Qosmio X505-Q8102X Restarting

    Hello all,
    I just bought a Qosmio x505-Q8102x and Im having an issue with it randomly restarting when playing games. The odd thing is that it only seems to happen when I have the power adaptor plugged in.
    I also have a side question about how to adjust the contrast of the screen without using the option in the Toshiba program that seems to be set up for the web cam. I tried to use the contrast option in there but it said that it would use high cpu. So I turned it off. I just can't seem to find the same screen controls that you have with all other monitors.
    Thanks,

    Ah that's c*ap.. but thx for reply mate
    Not quite satisfied with support here in Europe/Croatia, can't get any recovery media for my laptop as the recovery partition is damaged.. Fresh copy of windows works like crap with everything installed and updated.. I runned better when it was with factory preinstalled software..

  • Updating drivers for Nvidia Geforce GTX 460m in Qosmio X505-Q896

    I have been trying to update the GTX 460m driver from ver. 259.12 to the newest version 260.99. This newer driver is needed to make an older video game(Final Fantasy 11) playable. It has been available on Nvidia's site for some time now but is still not available on Toshiba's site for some reason. Simply downloading from the Nvidia website and running the file gets me this message "The graphics driver could not find compatible graphics hardware". It got me scratching my head because this model laptop has that specific graphics card.
    I called Toshiba support and they told me that because the kind of GTX 460m in this computer is specifically made for Toshiba the driver update is not supported. That doesn't make any sense to me.  Why wouldn't a driver specifically made for the Nvidia Geforce GTX 460m not be compatible with a Nvidia Geforce GTX 460m?
    This was in the notes on the driver download page from Nvidia. "Notebooks supporting Hybrid Power technology with Intel chipsets are not supported by this release." Could this be the problem? I have no idea if this laptop has Hybrid power or intel chipsets. It also downloaded the file into international instead of the english folder. I am at my wits end. I just want to play a game.
    Is there a way around this ?
    I put another post similiar to this one in the driver forum but didn't really get any help. I am hoping for a little more exposure and that's why this is in the general forums.

    ShawnWiseman,
    This is a known issue with Nvidia GPUs - not just the Qosmio.
    Go here:
    http://answers.microsoft.com/en-us/windows/forum/w​indows_7-hardware/display-driver-stopped-respondin​...
    I have a Qosmio X505-Q870 and can tell you that the stuff discussed at the link I provided did NOT resolve my issue.
    It will, however, give you some background and leave you with the conclusion that 'you are not alone' with the problem.
    I have seen posts around the web that suggest re-applying thermal paste to the CPU and GPU along with cleaning the cooling fans will resolve this issue.
    I have also seen posts stating that the GPU will have to be replaced . . .
    Take your pick!
    I believe it IS heat-related . . .
    What I did was remove the bottom covers from my machine and sit it on top of a Coolermaster NotePal X3 laptop cooler and it resolved the issue . . .
    Good Luck!

  • ACPI Flash BIOS version 2.60 Update Problem cause Blank Screen on Qosmio X505-Q870 HELP Needed!

    I have a Qosmio X505-Q870 that I bought 3 months ago. I updated to ACPI Flash BIOS version 2.60 today, as suggested by the Toshiba installation tools. I ran the update in Windows 7( didn't know this is dangerous) and it successfully completed, before it shuts down normally. When I try ti turn it on, the power LED is on, but the screen is blank. I tried to turn it off by pressing the power button for 20 seconds, but the computer would not turn off. What should I do now?

    I have a Qosmio X505-Q870 that I bought 3 months ago. I updated to ACPI Flash BIOS version 2.60 today, as suggested by the Toshiba installation tools. I ran the update in Windows 7( didn't know this is dangerous) and it successfully completed, before it shuts down normally. When I try ti turn it on, the power LED is on, but the screen is blank. I tried to turn it off by pressing the power button for 20 seconds, but the computer would not turn off. What should I do now?

  • Toshiba Qosmio x505-q870 error iaStor event ID: 9

    I have attached the error at the bottom of the message that i am getting from my computer.  I have seen this error on desktops and had to change a power connection to the hard drives.  I have not had this on my laptop before.  Since this error has started i have had times where the computer freezes for about 2 mins and than comes back up like nothing happened.  I need to know what is going on.  If you have any ideas please let me know. 
    Thank you
    Log Name:      System
    Source:        iaStor
    Date:          5/1/2012 10:19:43 PM
    Event ID:      9
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Description:
    The device, \Device\Ide\iaStor0, did not respond within the timeout period.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="iaStor" />
        <EventID Qualifiers="49156">9</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2012-05-02T05:19:43.788089700Z" />
        <EventRecordID>72151</EventRecordID>
        <Channel>System</Channel>
        <Security />
      </System>
      <EventData>
        <Data>\Device\Ide\iaStor0</Data>
        <Binary>0F0005000100000000000000090004C00100000000000000000000000000000000000000000000000000000001</Binary>
      </EventData>
    </Event>

    Qosmio X505-Q870 Specifications
    Qosmio X505-Q870 Downloads
    Event ID: 9 Source: iaStor
    Let's try to reinstall your core chipset & HDD driver set. Download these files to your desktop and double click to install them in this order:
    Intel Chipset SW Installation Utility
    Intel Rapid Storage Technology Driver
    See if this improves the situation at all. Please let us know what happens. Good luck.
    Mike

  • Qosmio X505-870 - Can't turn off and nothing on monitor

    I wasn't doing anything particularly interesting when my computer just shuts off randomly. I pressed the power button to turn it back on, I can hear the fan and the machine going but nothing appears on the monitor. I pressed and held the power button to turn it back off and try again, it won't turn off. It's stuck with the computer on but a blank screen.
    Not sure what to do, I can't turn it off, and it isn't doing anything.
    Might try to put the recovery discs in to see if it does anything but I'm worried about files I have saved on the desktop (stupidly)

    Hi colhyena,
    I agree with Akuma. The same instructions posted by Akuma I found here:
    [Which steps should be followed if your Toshiba notebook doesn't start?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]
    So thats everything what you can do and if its not working you need professional help from an authorized service provider.
    Qosmio X505 is newer notebook model so probably yours is still under warranty. In this case the repair is for free and you dont have to pay something. :)

  • I had an Intel-iMac fried by lightening. UPS, surge protectors but it happened as I was reaching to unplug.  Cold now.  Could it just be the power supply?  Can I replace that myself?

    This is the full question since I couldn't get it all in the box. 
    I have some complex questions regarding an iMac, a Time-Machine backup, and iTunes on an iPod.
    I live about halfway up an extinct volcano about 12 miles north of San Jose Costa Rica.  Some months ago, we had a thunderstorm and as I reached to unplug my computers lightening struck about 50 meters from my house.  I had an iMac with a 3-Tb external backup drive, a PC laptop and a laser printer on the same power strip.  There was a definite surge and the light brighten and then power was lost for a few minutes.
    When power was restored, the PC and the laser printer seemed to work fine but the iMac was cold.
    First questions:  Is is possible that the power supply was fried and not other essential parts?  Would it be worthwhile to replace the power supply?  Can I, with limited experience and tools do it or need I take it to a technician?  My concern is that if the hard-drive is good, there is personal information on it that I don't want to risk.
    Next question:  Do I need to replace the hard-drive before taking it for service?  How hard is that, can I do it? I have seen videos of the drive replacement on-line.
    Those are my iMac questions, now the questions about backup restoration.
    If there is a saving grace with this it is that the Time-Machine backup seems fine although I have only accessed the data through Finder.  I replaced the iMac with a Macbook Air with significantly less mass storage and I can't just move files to the Macbook.  My problem is that I have an iTunes library of some 10,000 songs on the backup and until recently on a 160 Gb iPod which was old and it crashed.  I have replaced the iPod but have not tried to restore the iTunes library to it because of my confusion about how to do that.  Can anyone tell me how I might do that or give me any insight into the process?
    Thanks for any help you can give.

    Is is possible that the power supply was fried and not other essential parts?  Would it be worthwhile to replace the power supply?  Can I, with limited experience and tools do it or need I take it to a technician?  My concern is that if the hard-drive is good, there is personal information on it that I don't want to risk
    Quite possible, but working on iMacs is not easy, & PSU might be prohibitive.
    Hopefully the Drive might have info on it, but even pulling that out can be a chore.
    If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
    http://www.chipmunk.nl/klantenservice/applemodel.html
    http://www.appleserialnumberinfo.com/Desktop/index.php
    How to find the serial number of your Apple hardware product...
    http://support.apple.com/kb/HT1349
    I have replaced the iPod but have not tried to restore the iTunes library to it because of my confusion about how to do that.  Can anyone tell me how I might do that or give me any insight into the process?
    I'd get an external drive & restore the whole works to it, then boot from the External drive.

  • Shock Therapy - An Athlon64 / FX Power Supply Guide

    I used to make a hardware list of all the components I would like to incorporate in my next
    computer build. Normally...at the bottom of that list would be the power supply, not that I
    didn't think it was important, it's just that my other hardware was so interesting! Today, power supplys
    seem to take a back seat to blazing-speed CPU's, Dual-Cored processors, glitz and glamour
    video cards...not to mention supersonic, heat-sinked RAM and modular, gizmoe'd PSU's promising not
    only over-achiever specifications, but eye-candy as well. The lowly PSU....tucked up somewhere inside
    it's dark and lonely loft....effortlessly supplying us with the energy required for important 3D imaging
    or just funning with the latest games.
    What a power supply does is rather simple. It converts your office or home's socketed electricity to
    usable 3.3v, 5.0v and 12.0v energy...that's all. A power supply that cannot efficiently do this will-
    over time-cause computer crashes, continuous reboots and shutdowns, and worse...expensive component damage.
    And now, with faster processors such as AMD's Athlon64 and FX line of CPU's, never has there been a time, when
    choosing the right power supply is so important! This article is written for those using these high-powered CPU's!
    Well...Do we have your attention!?
    If you are experiencing these problems, or still scratching your head over that last RMA....could be
    your PSU is trying to tell you something.
    To begin with, a power supply's ratings refer to its maximum output under ideal conditions. No power
    supply is 100% efficient. In high-quantity manufacturing, power supplys may not put out any more than 60% of
    their advertised specifications. In any PSU, that rating can be further reduced by the effects of heat
    and electro-magnetic radiation. That's where "switching" power supplys come in. A switching power supply draws
    only as much current that is needed from the AC input. Buying a hefty PSU with this feature will guarantee
    that you will be paying no more for electric service, than you would with a cheaper, less powerful unit.
    One of the most common causes of power supply inefficiency, and ultimately failure is dirt. Dust and
    foreign materials can cause the beginning of the end for a power supply, by attacking the fan first.
    It begins by slowing the fan down...thus creating heat through friction, then ultimately burning it out.
    PSU's with high-quality ball bearing fans are a must. They are far more durable, and not as likely to
    become noisier as time goes by.
    As a general rule...a failing PSU will usually emit abnormal sounds, followed by unstable voltage readings....
    then the computer crashes or lock-ups, with random shutdowns, and sometimes...refusal to even power-up.
    If you think your power supply is on its last leg...better to deal with it now, or face the more serious dilemmas later on.
    APM (Advanced Power Management)
    APM is a feature originally developed by partners, Microsoft and Intel. It relates to a systems ability
    to utilize different states in regards to a systems utilization of power. On, Off, Standby and Suspend
    are examples...these are BIOS features, not PSU functions. APM only requires of the power supply, the
    function to turn power on or off through an electrical signal, and the presence of stand-by voltage.
    All ATX power supplys are required to incorporate this feature. However, if some components in a computer
    are not APM-compliant, your system may encounter errors or freezes when going into hibernate or stand-by
    modes.
    ACPI (Advanced Control Power Interface)
    It's the latest power management control that was developed by a conglomeration of IT corporations. This interface
    is O.S. derived, rather than BIOS, and all ATX power supplys should be ACPI-compliant. You should not have to be
    concerned about this feature.
    Line-Conditioning Circuitry
    A power supply component that helps control power levels, spikes and surges in
    the most unreliable of home sockets.
    EMI Filter
    This circuitry smooths the fluctuations of incoming AC currents, also known
    as Electro-Magnetic Interference - EMI filters are usually found in higher-end power supplys.
    PFCC
    Power Factor Correction Circuitry...smooths out sudden, initial spikes in power
    delivery - reducing amplitude and preventing circuit overloads.
    Connectors
    There are five main connectors found on the latest version ATX power supply.
    1) ATX main power connector - 20-pin, 24-pin, and 20 to 24-pin adapter.
    2) ATX 12v power connector (4-pin to CPU)
    3) Molex peripheral power connector
    4) Floppy power connector
    5) Serial ATA power connector
    On newer SLI-certified power supplys, you'll find two 6-pin video card connectors.
    Know What You Need
    When purchasing a power supply, make sure your parts list is all-inclusive...know ahead of time, what you expect to
    install in your system. You should also visit the motherboard manufacturer's site, as well as the CPU's. Most of the
    products will have specifics regarding power supply requirements needed for that specific component. Unfortunately, you
    really won't know how well the PSU performs until it is installed and running your system (hopefully!) This is the main reason we
    recommend the most popular brands - power supplys that have shown a duration of manufacturing quality over the years. Those are
    as follows: Antec, Enermax, OCZ, PC Power and Cooling, Tagan, and a few newcomers such as SeaSonic and Silverstone are
    worth looking into.
    If you believe you have found the PSU of choice, remember this: AMD recommends a minimum 350 watt power supply to run
    Athlon64 and FX CPU's. To that, add the 30% for power lost to heat, and the subsequent electro-magnetic radiation. Hold on with that
    calculator...throw in an additional 40% to 60% for the "potential" inaccuracies of specifications inherent in mass-produced electronics.
    Pay special attention to outputs on either single, or dual rail +12v lines. A motherboard, CPU, and graphics card can consume up to
    150 watts alone - before hooking up your remaining components. If running an SLI configured board, look for a PSU that is certified
    to run that configuration...there's only a few PSU's that lay claim to that!
    Broken down, you can look at it this way: An Athlon64/FX processor can use up to 90 watts off the +12v rail. High performance RAM
    can take in about 25 watts for each stick of 256MB system memory from the +3.3v line. PCI cards will use about 10 watts each, while
    an AGP video card can consume about 50 precious watts alone from the +5v or +12v. Hard drives? A 7,200 RPM drive...about 15 watts
    each, taken from the +5v and +12v rail. Finally, but not absolutely is the optical drives...robbing about 20 watts each, also from
    the +5v and +12v lines. So you see....not only is the +12v amp ratings of concern, but also the +5v line!
    In doing the math...on a system incorporating an Athlon64 (say a 4000+), 2 sticks of high-end RAM, 2 or 3 PCI cards, 1 mid-to-high
    end AGP video card, 2 ~ 7,200 RPM hard drives, and a couple of CD/RW or DVD/RW opticals...you're looking at a "base" requirement of 270 to 325 watts. That's for a running system...now figure boot-up loads, 30% for heat and radiation bleed-off, then a 40% safety factor for manufacturing inconsistencies...you've got a power supply in the 450 to 520 watt range!
    Modular Power Supplys:
    The pins that are used for the modular plugs are not very good at passing current. It's basically electrical resistance between the male and female components, and voltage "drops" are likely. In real world events, they will become loose, dirty, corrosive, and eventually burn. You can figure about 10% less efficiency with a modular power supply.
    Now you can understand how manufacturing "tolerances" that are inaccurate by 40% to 60%, can have such a devastating effect on
    the performance of your new system. If you follow these simple guidelines, bearing in mind the hardware you will be using, and what
    your intended use of the computer is for...then it will be one less dramatic incident when pushing the power button for the first time!
    Here's a neat little tool....a bit out of date - that can give you a basic idea of what you'll need in a PSU.
    You can apply the percentages above, for an even more accurate assesment of your PSU requirements!
    http://www.jscustompcs.com/power_supply/Power_Supply_Calculator.php?cmd=AMD

    Quote
    In doing the math...on a system incorporating an Athlon64 (say a 4000+), 2 sticks of high-end RAM, 2 or 3 PCI cards, 1 mid-to-high
    end AGP video card, 2 ~ 7,200 RPM hard drives, and a couple of CD/RW or DVD/RW opticals...you're looking at a "base" requirement of 270 to 325 watts. That's for a running system...now figure boot-up loads, 30% for heat and radiation bleed-off, then a 40% safety factor for manufacturing inconsistencies...you've got a power supply in the 450 to 520 watt range!
    Well, except the CPU, my system has all that you mentioned there (I even have 3 optical drives). And my 350W PSU has been rock solid for more than a year (BeQuiet, = Tagan, IIRC). I don't think a 4000+ needs 100W more than my 3200+ . And that link you posted says that the minimum recommended PSU for my system is 506W  xD. Come on.
    Oh, and in the place I work there are 6 amd64 with GeForce 6800 GT and 2GB RAM with 380W Antec PSUs. All 100% stable, of course.
    I would only go for >400W if I wanted to do extreme OC (with overvolting), or SLI. Otherwise, a good brand 350W PSU is more than enough.

Maybe you are looking for