Qosmio X505-Q860/Issues/Sound goes up & down, in & out

Hello,
Bit of a issue with my sound system; (kinda been a problem since I've had it, which has only been a few months, though only now decided to finally break down and ask for help.) The issue being that my sound goes up and down, in and out,( makes the stomach a bit sick while listening to it.) I notice this issue more while playing music than movies; I don't know if this matters much. I have tried to simply change the setting and style; to no avail had this done any improvement. I have been searching to see if this issue has been reported, but haven't found any solution; I've been told it might be a driver issue, yet I'm not quite sure what to do about it. I have warranty, is it best to contact Toshiba? Anyway, just looking for any say on the issue.
^_^ Thank You.
Solved!
Go to Solution.

SOLUTION FOUND!
Hello all
In order to prevent volume variations from occurring, all you need to do is click on the Start Menu, then click on Run, then type "msconfig", then click on the Startup tab and then UNTICK the row entitled "Toshiba Volume Regulator".
You will need to restart your computer for the changes to take effect and on start up you will get a message saying that the Startup list has been modifed (etc.), just click on "Do not show me again" and that's it!
Enjoy!

Similar Messages

  • Qosmio X505-Q860 CD Burner won't Burn Disks

    While I love most everything about my computer, the cd burner won't burn new cds.  Every time I try to burn a cd I get errors.
    Windows Media Player Message - Windows Media Player cannot burn the files. If the burner is busy, wait for the current task to finish. If necessary, verify that the burner is connected properly and that you have installed the latest device driver.
    This is when I first start my computer.  I don't know how to see if "the burner is connected properly" or where to find "the latest device driver".
    iTunes Message - The attempt to burn a disc failed. An unknown error occurred (4450).
    Current Drivers - c:\windows\system32\DRIVERS\cdrom.sys
                              c:\windows\system32\DRIVERS\GEARAspiWDM.sys
                              c:\windows\system32\DRIVERS\tdcmdpst.sys
    I do have software for virtual drives - Virtual CloneDrive and the WD Virtual CD 1110 software that came with my external drive. 
    Any information or advice that would help me be able to burn cds would be greatly appreciated.

    Qosmio X505-Q860
    All the burning software is built into Windows. Try running this.
       How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows...
    -Jerry

  • Toshiba Qosmio x505-q870 Issues

    Hi, i'm a proud owner of this laptop and its served me very well for the past 3 years. 
    Recently i'm having some heat issues where i think the computer is starting to hang/freeze around 75c.  I've checked some other forums and folks say thermal shutdown is MUCH higher than that so i'm kinda curious at why its happening.  Naturally i've cleaned out all the vents, got a laptop cooler, got rid of as much bloatware, and minimized my HDD usage for as much efficiency as i can squeeze out of the machine.  Not too sure what the next step would be to try to minimize the heat.  At rest with the cooler fan i'm looking at 50c while during intense gaming 65-75c, which is where the freezing, BSOD, and other bad things occur.
    I've also ugraded my RAM.  i bought 2 sticks of 4 gig Patriot PC3-12800 1600 MHz CL11 1.35v RAM, which are technically compatible as they are the same speed and size as the ram also sold via the Toshiba website.  My first game with the new RAM showed massive improvement in FPS.  However shortly into the next round it froze up where i needed to do a cold shutdown.  Thinking nothing of it, I restarted and began another game and the same thing happened again where it froze.  After that point i stopped to reassess my options.  Heat was also extremely high, but that was nothing out of the norm for my current situation.
    After some quick research on what i shoud do, i ran Memtest86 which came back clean after 20 passes, updated my BIOs from v2.3 to v2.9, and tried to get into the BIOs to try to change the voltage being sent into the RAM.  My old ram had 1.5v while the new ones were at 1.35v.  I ran the program cpu-z to see what voltage it was being run at, and it was set at 1.28v so apparently there's something going on.  Unfortunately in the BIOs i couldnt find how to change the voltage settings, so i'm currently at a loss what to do.  Some more reading has brought to my attention that the fans might not also be working at full capacity.  I also tried to see how i can adjust my fan speeds in the BIOs and again came to a loss.
    What do i do to try to minimize my heat burden and try to get my RAM integrated smoothly?

    Qosmio X505-Q870 Specifications
    Qosmio X505-Q870 Downloads
    Event ID: 9 Source: iaStor
    Let's try to reinstall your core chipset & HDD driver set. Download these files to your desktop and double click to install them in this order:
    Intel Chipset SW Installation Utility
    Intel Rapid Storage Technology Driver
    See if this improves the situation at all. Please let us know what happens. Good luck.
    Mike

  • Windows XP SP3 on Qosmio X505 Q880, Conexant Sound [WORKS!]

    I've gotten everything but sound to work. The problem seems to be that it doesn't show up AT ALL. Meaning if there was some "unknown device" to force a driver through, it would work! So I'm wondering if there is something obsolete about UAA 1.0a conpared to Windows 7's UAA. Or maybe its outside of 32bit address space?
    Its frustrating, because everything else works PERFECTLY! (after a lot of trial and error)
    I'll share what I've done so far, and I'll be working tirelessly to get the sound working for the forseeable future, since I've spent so much time on it already. This should be the exact same for any X505 series, since the chipsets are all the same.
    *You need free space on your drive for a new partition. Many options here...partition magic, etc. Personally, the tiny SDD got annoying fast, so I threw it out replaced it with a 640GB. Ahh, 10 times the space. Sweet relief.
    *You need the WinXP OEM/Retail XP disk files. An unzipped or mounted ISO will do. (You will also need a blank CD-R for the finished product)
    *Download nLite, http://www.nliteos.com/download.html. Feed it where your windows files are.
    *Since Win XP install crashes due to missing SATA drivers so we use nLite to "slipstream" them in:
    Windows Installer text mode SATA drivers: (I had nLite put in every line item from this pkg)   http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18860&lang=eng
    Regular Windows SATA drivers, so it actually boots once installed: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18180
    Oh, if you want network access (YES YOU DO!)...slip in the wireless drivers: http://wikidrivers.com/wiki/Realtek_RTL8191SE/RTL8192SE
    Be careful with the rest of the nLite settings, removing features might save a little space, but break stuff. Although the sizable language packs are a huge sitting duck, worth removing
    *Install. When you format, do quick mode. The text mode drivers are SLOWWW and it will take an hour to finish.
    *Open IE, go to nvidia.com, download drivers (yes the screen difficult to navigate because nVidia fails at life), 300*M* Series chip set, 360M   (MAKE SURE THE M's are there!).
    *Run windows update from IE. Select custom, and select all the hardware updates. You'll now have everything but bluetooth, touchpad scrolling, and sound.
    *If you want bluetooth, download the "Bluetooth Stack" from Toshiba Support Downloads.
    *If you want touchpad scrolling/gestures, temporarily unplug any USB mice, and install this:
    http://drivers.synaptics.com/Synaptics_v14_0_3_C_XP32_Vista32_Win7-32_Signed_default.exe
    *LAST FREAKING STEP...Installing sound:.....not there yet.....hlep!
    Solved!
    Go to Solution.

    YES!! It works!! Countless hours of pounding has paid off!
    (The attachment says SOUND.TXT ....but if you rename it to SOUND.ZIP, things will make much more sense
    Two major steps...the first one is the same no matter what your sound chip is, conexant, realtek, etc. The second one gets more specific.
    Step 1: Patch Unified Audio Architecture (UAA), so it recognises sound card
    Step 2: Install Driver for card
    Sounds easy? Eh...kinda long and frought with problems, but persistance pays off.
    The only problem is that you won't have sound until after you log in.
    Use the files I attached and this should work straight off.
    0. Make sure all your hardware updates are run, because all that crap gets in the way, especially the NVIDIA HDMI sound devices, which can cause confusion.
    1. Download my attachment. (Just google for the files if it is gone)
    EDIT: attachment didn't work...see my 3rd post below to recreate the files
    Assuming you have XP SP3....we need to fake the Windows version so that it looks like SP2, so the new UAA wil install.
    2. Open and install SP2.reg. ALTERNATIVELY: If you don't like opening reg files, use regedit to change
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows  -> CSDVersion to "200" (hexadecimal)
    3. Run the UAA update, usually kb888111.exe
    http://cid-3f10d7c1771f7efe.skydrive.live.com/self.aspx/Public/MS-UAA%20for%20XP.zip
    4. Now we restore it back to SP3. Run XP3.reg, or regedit CSDVersion back to 300 hex.
    5. Reboot.
    At this point there should be some new high def audio device begging for drivers. But,just our luck, there isn't. For some reason UAA will crash at boot, and its pretty good at that. So, we need to restart UAA.
    6. Get devcon and copy it into your root directory C:\ . (its from MS, resembles linux's lspci command).
    This will do the legwork of starting UAA.
    7. Run UAAstart.bat. UAA should work now, and it should find your sound and ask for a driver. If not, edit the bat file, and correct the DEV_ number. You can get this number from Control Panel -> System -> Hardware (tab) -> Device Manager -> System devices -> "Microsoft UAA Bus Driver for High Definition Audio" (there should be two of them, pick the bottom one) -> Details (Tab) -> Device Instance Id
    (If you can't get the attachment, "devcon restart ..." where ... is the device ID)
    EDIT: go down to my 3rd post for a more thorough treatment of devcon
    9. It should NOW be asking you a driver. (YES!)
    This is where it gets more specific. The drivers here will work for X505 and several other models.
     http://cid-10d0e6e125be32c7.skydrive.live.com/self.aspx/.Public/6ha113ww%5E_mod.zip
    You will need to edit the INF file to change it to have the same DEV_ and SUBSYS_ numbers as your "Unknown Device", get these from Device Manager -> Unknown High Definition Audio Device ->Details -> Device Instance Id. If the DEV_ numbers are off by more than afew, you might have the wrong driver. 
    For examlple, in the above zip, the TPShin5a.inf file has the following line:
    %HdAudioFunctionDriver.Pebble5071.DeviceDesc% = HdAudModel,HDAUDIO\FUNC_01&VEN_14F1&DEV_5067&SUBSYS_103C360A
    In my case, I changed one of the lines to read
    %HdAudioFunctionDriver.Pebble5071.DeviceDesc% = HdAudModel,HDAUDIO\FUNC_01&VEN_14F1&DEV_5067&SUBSYS_1179FFD5
    You'll notice more than one of those. You don't have to change them all, its just a list of chip IDs that tells Windows this driver will work.
    10. Point driver update to that directory.
    11. You should have sound! If you don't, make sure you have conexant chipset, if you don't use other drivers.
    OK Problem, I'm sure you'll notice that you'll lose sound every time you reboot. Well,
    12. Copy that UAAstart.bat to the Start->Program Files-> Startup
    That way it will force the sound to start when you log in.

  • Qosmio: X505-Q890 Black Screen BUT Computer has not crashed

    I have a Qosmio: X505-Q890, my screen goes black after a few minutes.  But if you look at it on an angle you can see screen and mouse moving around.  I am assuming that the backlights are going out on screen.  What is the fix.  I am capabale of dissasembling laptop and repairing.  What parts do I need to fix?
    Thanks
    Greg

    It could be either the inverter or the backlight, but it's hard to know for sure. It could also be a loose cable, but that seems less likely to me (although it might be easier to check).
    - Peter

  • The sound goes up and down on my hp pavilion dv6

    Hello guys
    My laptop [ HP notebook dv6 ] with win7 has an issue with sound. The sound goes up and down as I play music (whether it is mp3 or from youtube).

    Hi,
    Can you post back with the full Model No. and Product No. of your dv6 series notebook - see Here for a further explanation.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Sound goes up and down occasionally, sometimes it crackles right before

    Sometimes my sound goes low and then comes back up to the normal volume when I am listening to music, watching a show, or watching something on youtube. I'm not sure what is causing it and the online chat person couldn't figure it out. She when into my speaker setup and enabled all the optional speakers (center, subwoofer, rear pair) and then under "full range speakers" she enabled "front left and right" and also "surround speakers" but that didn't help. Any solutions for this?
    HP H9-1400t system
    windows 8.1

    Hi Dave,
    Did you upgrade to Win 8.1? Try installing this IDT audio driver for Win 8.1.
    If this driver does not help then temporarily use a two speaker setup and use the headphone jack on the top of your tower instead of the rear audio out jack. Your rear input/output audio jacks may be failing. If this is true you may have to replace the mainboard.
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++
    H8 1380t CTO, Intel i7 3820
    16 GB DDR3
    Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
    Envy Phoenix 810-150se, Intel i7 4820k
    16 GB DDR3
    Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
    HP 560z CTO AMD Phenom II X6 1090T
    16 GB DDR3.
    Radeon HD 6570
    Win 7 Home Premium upgraded to Win 7 Pro.
    HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
    12 GB DDR3
    Nvidia Graphics
    Win 8 Pro
    Errare humanum est.

  • [Solved] Random freezes on a Toshiba Qosmio X505-Q888

    Hi guys,
    My laptop has been freezing randomly, about once per day, during the last 2 or 3 weeks. The system freezes completely, i.e. the display freezes, I cannot move the mouse, I cannot use the keyboard, the CAPS LOCK light starts blinking, and if there is any music playing, it enters an infinite loop of 2-3 seconds. I cannot use any keyboard combination such as Ctrl+Alt+F1 to switch into a terminal. Then I have no choice but to press and hold the power button.
    The freezes seem to happen in a completely random fashion, independently from what programs/applications I am running, for how long the computer has been on, how much memory I am using, CPU temperature, etc. Also, I cannot find any clue in the log files. Everything seems to be OK just before the freeze (except for some random, annoying, but apparently unrelated messages such as "[system] Failed to activate service 'org.freedesktop.Avahi': timed out"). The only clue is that the CAPS LOCK key is blinking during the freeze, which means... kernel panic?
    I am running 64-bit Arch Linux on a Toshiba Qosmio X505-Q888. My current kernel is 3.4.2-2, but this has been happening since at least 3.3.7-1. I know another person with exactly the same laptop model as me, who is having the same issues. I am lost here. Any ideas?
    Thanks in advance!
    lspci output:
    00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
    00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
    00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
    00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
    00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
    00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
    00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
    00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
    00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05)
    00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
    00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 05)
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
    00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
    01:00.0 VGA compatible controller: NVIDIA Corporation GT215 [GeForce GTS 360M] (rev a2)
    01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
    07:00.0 FireWire (IEEE 1394): O2 Micro, Inc. 1394 OHCI Compliant Host Controller (rev 01)
    07:00.1 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)
    07:00.2 Mass storage controller: O2 Micro, Inc. Integrated MS/MSPRO/xD Controller (rev 01)
    0a:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10)
    0b:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0)
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
    ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
    ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
    ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
    ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
    ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
    ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
    ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
    ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
    ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
    ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
    ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
    ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
    lsmod output:
    Module Size Used by
    fuse 68768 2
    uvcvideo 69437 0
    videobuf2_vmalloc 2468 1 uvcvideo
    videobuf2_memops 2246 1 videobuf2_vmalloc
    snd_hda_codec_hdmi 23672 4
    videobuf2_core 20415 1 uvcvideo
    videodev 93086 1 uvcvideo
    media 10213 2 uvcvideo,videodev
    joydev 9991 0
    snd_hda_codec_conexant 46154 1
    snd_hda_intel 24053 6
    snd_hda_codec 94273 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
    arc4 1410 2
    snd_hwdep 6300 1 snd_hda_codec
    rtl8192se 60798 0
    snd_pcm 74958 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    sdhci_pci 10833 0
    rtlwifi 61929 1 rtl8192se
    nvidia 10832296 52
    sdhci 23854 1 sdhci_pci
    toshiba_acpi 12820 0
    snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
    sparse_keymap 3056 1 toshiba_acpi
    acpi_cpufreq 5933 1
    snd_timer 18966 1 snd_pcm
    mac80211 395232 2 rtlwifi,rtl8192se
    snd 58997 18 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
    mmc_core 82070 2 sdhci,sdhci_pci
    mperf 1267 1 acpi_cpufreq
    serio_raw 4653 0
    soundcore 5410 1 snd
    i2c_i801 8180 0
    wmi 8475 1 toshiba_acpi
    psmouse 70792 0
    processor 26567 1 acpi_cpufreq
    video 11307 0
    thermal 7959 0
    battery 6517 0
    ac 2376 0
    pcspkr 1899 0
    cfg80211 169978 2 mac80211,rtlwifi
    microcode 12185 0
    coretemp 5654 0
    iTCO_wdt 12813 0
    rfkill 15604 3 cfg80211,toshiba_acpi
    iTCO_vendor_support 1929 1 iTCO_wdt
    i7core_edac 17509 0
    edac_core 36656 1 i7core_edac
    crc32c_intel 1987 0
    firewire_ohci 31677 0
    firewire_core 51552 1 firewire_ohci
    atl1c 33030 0
    crc_itu_t 1363 1 firewire_core
    button 4502 0
    toshiba_bluetooth 2066 0
    i2c_core 20369 3 i2c_i801,nvidia,videodev
    evdev 9754 11
    vboxdrv 1792262 0
    loop 18160 0
    ext4 424175 4
    crc16 1359 1 ext4
    jbd2 73919 1 ext4
    mbcache 5977 1 ext4
    sr_mod 14823 0
    sd_mod 29239 6
    cdrom 35648 1 sr_mod
    usbhid 36430 0
    hid 85285 1 usbhid
    ahci 20549 5
    libahci 20023 1 ahci
    libata 167515 2 ahci,libahci
    ehci_hcd 41154 0
    scsi_mod 132942 3 libata,sd_mod,sr_mod
    usbcore 147533 5 uvcvideo,rtlwifi,ehci_hcd,usbhid
    usb_common 954 1 usbcore
    /var/log/dmesg.log:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.2-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 11 22:27:17 CEST 2012
    [ 0.000000] Command line: root=/dev/sda6 ro
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
    [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf282000 - 00000000bf3ec000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf3ec000 - 00000000bf40f000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf46f000 - 00000000bf470000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf470000 - 00000000bf4f1000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf4f1000 - 00000000bf70f000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf70f000 - 00000000bf718000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf718000 - 00000000bf71f000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf71f000 - 00000000bf782000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf782000 - 00000000bf79f000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf79f000 - 00000000bf7cc000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf7cc000 - 00000000bf7ff000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: TOSHIBA Qosmio X505/Qosmio X505, BIOS V2.60 06/11/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DBFFF uncachable
    [ 0.000000] DC000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 disabled
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 100000000 mask FC0000000 write-back
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000f6300] f6300
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
    [ 0.000000] 0000000000 - 00bf800000 page 2M
    [ 0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    [ 0.000000] 0100000000 - 0140000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 140000000 @ bf7c6000-bf7cc000
    [ 0.000000] RAMDISK: 37d21000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000f6230 00024 (v02 TOSQCI)
    [ 0.000000] ACPI: XSDT 00000000bf7eef64 00064 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000bf7ce000 000F4 (v03 INTEL CALPELLA 06040000 PTEC 00000001)
    [ 0.000000] ACPI: DSDT 00000000bf7cf000 0FBD2 (v02 TOSQCI CALPELLA 06040000 INTL 20060912)
    [ 0.000000] ACPI: FACS 00000000bf79bfc0 00040
    [ 0.000000] ACPI: HPET 00000000bf7fed32 00038 (v01 INTEL CALPELLA 06040000 PTEC 00000001)
    [ 0.000000] ACPI: MCFG 00000000bf7fed6a 0003C (v01 INTEL CALPELLA 06040000 PTEC 00000001)
    [ 0.000000] ACPI: APIC 00000000bf7feda6 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000bf7fee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000bf7fee8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
    [ 0.000000] ACPI: DMAR 00000000bf7df000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000bf7cd000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000140000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    [ 0.000000] NODE_DATA [000000013fffc000 - 000000013fffffff]
    [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00140000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009c
    [ 0.000000] 0: 0x00000100 -> 0x000bf27c
    [ 0.000000] 0: 0x000bf282 -> 0x000bf3ec
    [ 0.000000] 0: 0x000bf40f -> 0x000bf46f
    [ 0.000000] 0: 0x000bf70f -> 0x000bf718
    [ 0.000000] 0: 0x000bf71f -> 0x000bf782
    [ 0.000000] 0: 0x000bf79f -> 0x000bf7cc
    [ 0.000000] 0: 0x000bf7ff -> 0x000bf800
    [ 0.000000] 0: 0x00100000 -> 0x00140000
    [ 0.000000] On node 0 totalpages: 1045612
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 763168 pages, LIFO batch:31
    [ 0.000000] Normal zone: 4096 pages used for memmap
    [ 0.000000] Normal zone: 258048 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000bf27c000 - 00000000bf282000
    [ 0.000000] PM: Registered nosave memory: 00000000bf3ec000 - 00000000bf40f000
    [ 0.000000] PM: Registered nosave memory: 00000000bf46f000 - 00000000bf470000
    [ 0.000000] PM: Registered nosave memory: 00000000bf470000 - 00000000bf4f1000
    [ 0.000000] PM: Registered nosave memory: 00000000bf4f1000 - 00000000bf70f000
    [ 0.000000] PM: Registered nosave memory: 00000000bf718000 - 00000000bf71f000
    [ 0.000000] PM: Registered nosave memory: 00000000bf782000 - 00000000bf79f000
    [ 0.000000] PM: Registered nosave memory: 00000000bf7cc000 - 00000000bf7ff000
    [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
    [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000
    [ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
    [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82880 r8192 d23616 u262144
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1025127
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/sda6 ro
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 4035888k/5242880k available (4537k kernel code, 1060432k absent, 146560k reserved, 4308k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 1729.162 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3459.42 BogoMIPS (lpj=5763873)
    [ 0.000008] pid_max: default: 32768 minimum: 301
    [ 0.000037] Security Framework initialized
    [ 0.000042] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000393] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001416] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001859] Mount-cache hash table entries: 256
    [ 0.002086] Initializing cgroup subsys cpuacct
    [ 0.002089] Initializing cgroup subsys memory
    [ 0.002097] Initializing cgroup subsys devices
    [ 0.002099] Initializing cgroup subsys freezer
    [ 0.002101] Initializing cgroup subsys net_cls
    [ 0.002103] Initializing cgroup subsys blkio
    [ 0.002131] CPU: Physical Processor ID: 0
    [ 0.002133] CPU: Processor Core ID: 0
    [ 0.002139] mce: CPU supports 9 MCE banks
    [ 0.002149] CPU0: Thermal monitoring handled by SMI
    [ 0.002156] using mwait in idle threads.
    [ 0.003399] ACPI: Core revision 20120320
    [ 0.078006] ftrace: allocating 17820 entries in 70 pages
    [ 0.090499] DMAR: Host address width 36
    [ 0.090501] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
    [ 0.090510] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020e2
    [ 0.090513] DMAR: RMRR base: 0x000000bf6e9000 end: 0x000000bf6fefff
    [ 0.091060] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.124054] CPU0: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz stepping 05
    [ 0.229382] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
    [ 0.229388] CPU erratum AAJ80 worked around
    [ 0.229390] CPUID marked event: 'bus cycles' unavailable
    [ 0.229393] ... version: 3
    [ 0.229394] ... bit width: 48
    [ 0.229395] ... generic registers: 4
    [ 0.229397] ... value mask: 0000ffffffffffff
    [ 0.229399] ... max period: 000000007fffffff
    [ 0.229400] ... fixed-purpose events: 3
    [ 0.229402] ... event mask: 000000070000000f
    [ 0.249516] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.269397] Booting Node 0, Processors #1
    [ 0.280536] CPU1: Thermal monitoring handled by SMI
    [ 0.282640] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.292741] #2
    [ 0.303877] CPU2: Thermal monitoring handled by SMI
    [ 0.305984] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.319396] #3
    [ 0.330532] CPU3: Thermal monitoring handled by SMI
    [ 0.332638] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.342719] #4
    [ 0.353852] CPU4: Thermal monitoring handled by SMI
    [ 0.355956] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.366056] #5
    [ 0.377192] CPU5: Thermal monitoring handled by SMI
    [ 0.379301] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.392710] #6
    [ 0.403843] CPU6: Thermal monitoring handled by SMI
    [ 0.405953] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.416041] #7 Ok.
    [ 0.427172] CPU7: Thermal monitoring handled by SMI
    [ 0.429279] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.429317] Brought up 8 CPUs
    [ 0.429319] Total of 8 processors activated (27677.36 BogoMIPS).
    [ 0.435425] devtmpfs: initialized
    [ 0.436874] PM: Registering ACPI NVS region [mem 0xbf470000-0xbf4f0fff] (528384 bytes)
    [ 0.436887] PM: Registering ACPI NVS region [mem 0xbf782000-0xbf79efff] (118784 bytes)
    [ 0.437790] NET: Registered protocol family 16
    [ 0.437904] ACPI: bus type pci registered
    [ 0.437991] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.437995] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.511154] PCI: Using configuration type 1 for base access
    [ 0.511883] bio: create slab <bio-0> at 0
    [ 0.511944] ACPI: Added _OSI(Module Device)
    [ 0.511947] ACPI: Added _OSI(Processor Device)
    [ 0.511949] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.511951] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.514367] ACPI: EC: Look up EC in DSDT
    [ 0.516773] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.522616] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.523068] ACPI: SSDT 00000000bf71aa98 0032A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.523663] ACPI: Dynamic OEM Table Load:
    [ 0.523667] ACPI: SSDT (null) 0032A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.523844] ACPI: SSDT 00000000bf719018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.524426] ACPI: Dynamic OEM Table Load:
    [ 0.524429] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.524795] ACPI: SSDT 00000000bf71a718 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.525430] ACPI: Dynamic OEM Table Load:
    [ 0.525433] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.525614] ACPI: SSDT 00000000bf718d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.526223] ACPI: Dynamic OEM Table Load:
    [ 0.526226] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.592282] ACPI: Interpreter enabled
    [ 0.592285] ACPI: (supports S0 S3 S4 S5)
    [ 0.592311] ACPI: Using IOAPIC for interrupt routing
    [ 0.598233] ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
    [ 0.598514] ACPI: No dock devices found.
    [ 0.598518] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.598955] \_SB_.PCI0:_OSC invalid UUID
    [ 0.598957] _OSC request data:1 8 1f
    [ 0.598961] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.599649] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.599652] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.599655] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.599658] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.599660] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.599663] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.599666] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
    [ 0.599705] PCI host bridge to bus 0000:00
    [ 0.599708] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.599710] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.599713] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.599715] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.599717] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.599720] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.599722] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
    [ 0.599734] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
    [ 0.599797] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
    [ 0.599854] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    [ 0.599882] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
    [ 0.599947] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
    [ 0.600011] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
    [ 0.600073] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
    [ 0.600134] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
    [ 0.600183] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
    [ 0.600275] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 0.600302] pci 0000:00:1a.0: reg 10: [mem 0xf0906000-0xf09063ff]
    [ 0.600404] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.600445] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 0.600466] pci 0000:00:1b.0: reg 10: [mem 0xf0900000-0xf0903fff 64bit]
    [ 0.600545] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.600582] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 0.600664] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.600704] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
    [ 0.600786] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.600823] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
    [ 0.600906] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.600940] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
    [ 0.601022] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 0.601061] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 0.601088] pci 0000:00:1d.0: reg 10: [mem 0xf0907000-0xf09073ff]
    [ 0.601190] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.601230] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.601314] pci 0000:00:1f.0: [8086:3b03] type 00 class 0x060100
    [ 0.601463] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
    [ 0.601488] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837]
    [ 0.601501] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827]
    [ 0.601514] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f]
    [ 0.601527] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823]
    [ 0.601541] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f]
    [ 0.601554] pci 0000:00:1f.2: reg 24: [mem 0xf0908000-0xf09087ff]
    [ 0.601612] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.601644] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 0.601665] pci 0000:00:1f.3: reg 10: [mem 0xf0909000-0xf09090ff 64bit]
    [ 0.601692] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
    [ 0.601781] pci 0000:01:00.0: [10de:0cb1] type 00 class 0x030000
    [ 0.601793] pci 0000:01:00.0: reg 10: [mem 0xcc000000-0xccffffff]
    [ 0.601805] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.601818] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
    [ 0.601827] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
    [ 0.601836] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
    [ 0.601895] pci 0000:01:00.1: [10de:0be4] type 00 class 0x040300
    [ 0.601907] pci 0000:01:00.1: reg 10: [mem 0xcdefc000-0xcdefffff]
    [ 0.602005] pci 0000:00:03.0: PCI bridge to [bus 01-01]
    [ 0.602009] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 0.602013] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff]
    [ 0.602018] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.602068] pci 0000:00:1c.0: PCI bridge to [bus 02-04]
    [ 0.602077] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.602086] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
    [ 0.602097] pci 0000:00:1c.0: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
    [ 0.602174] pci 0000:07:00.0: [1217:10f7] type 00 class 0x0c0010
    [ 0.602196] pci 0000:07:00.0: reg 10: [mem 0x00000000-0x00000fff]
    [ 0.602327] pci 0000:07:00.0: supports D1 D2
    [ 0.602329] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.602380] pci 0000:07:00.1: [1217:8120] type 00 class 0x080501
    [ 0.602402] pci 0000:07:00.1: reg 10: [mem 0xf0501000-0xf05010ff]
    [ 0.602533] pci 0000:07:00.1: supports D1 D2
    [ 0.602535] pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.602597] pci 0000:07:00.2: [1217:8130] type 00 class 0x018000
    [ 0.602619] pci 0000:07:00.2: reg 10: [mem 0xf0503000-0xf0503fff]
    [ 0.602647] pci 0000:07:00.2: reg 18: [mem 0xf0502000-0xf05027ff]
    [ 0.602758] pci 0000:07:00.2: supports D1 D2
    [ 0.602760] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.612633] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
    [ 0.612644] pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.612728] pci 0000:0a:00.0: [10ec:8172] type 00 class 0x028000
    [ 0.612750] pci 0000:0a:00.0: reg 10: [io 0x4000-0x40ff]
    [ 0.612767] pci 0000:0a:00.0: reg 14: [mem 0xf0600000-0xf0603fff]
    [ 0.612884] pci 0000:0a:00.0: supports D1 D2
    [ 0.612887] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.622602] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
    [ 0.622621] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
    [ 0.622630] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf06fffff]
    [ 0.622707] pci 0000:0b:00.0: [1969:1063] type 00 class 0x020000
    [ 0.622736] pci 0000:0b:00.0: reg 10: [mem 0xf0400000-0xf043ffff 64bit]
    [ 0.622753] pci 0000:0b:00.0: reg 18: [io 0x5000-0x507f]
    [ 0.622870] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.632604] pci 0000:00:1c.6: PCI bridge to [bus 0b-0b]
    [ 0.632622] pci 0000:00:1c.6: bridge window [io 0x5000-0x5fff]
    [ 0.632631] pci 0000:00:1c.6: bridge window [mem 0xf0400000-0xf04fffff]
    [ 0.632711] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
    [ 0.632725] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.632728] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.632731] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.632733] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 0.632736] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.632739] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.632742] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
    [ 0.632778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.632953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
    [ 0.633024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.633153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.633220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 0.633284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.633347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
    [ 0.633449] \_SB_.PCI0:_OSC invalid UUID
    [ 0.633451] _OSC request data:1 1f 1f
    [ 0.633455] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.633495] \_SB_.PCI0:_OSC invalid UUID
    [ 0.633497] _OSC request data:1 0 1d
    [ 0.633501] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
    [ 0.633503] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.639419] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
    [ 0.639461] PCI host bridge to bus 0000:ff
    [ 0.639468] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
    [ 0.639491] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
    [ 0.639516] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
    [ 0.639537] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
    [ 0.639560] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
    [ 0.639582] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
    [ 0.639605] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
    [ 0.639628] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
    [ 0.639649] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
    [ 0.639670] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
    [ 0.639691] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
    [ 0.639714] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
    [ 0.639735] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
    [ 0.639757] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
    [ 0.639779] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
    [ 0.639820] pci0000:ff: Requesting ACPI _OSC control (0x1d)
    [ 0.639823] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.639825] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.640363] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.640427] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.640488] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 0.640549] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    [ 0.640609] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.640673] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.640735] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [ 0.640799] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 0.640906] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.640915] vgaarb: loaded
    [ 0.640916] vgaarb: bridge control possible 0000:01:00.0
    [ 0.640960] PCI: Using ACPI for IRQ routing
    [ 0.647549] PCI: pci_cache_line_size set to 64 bytes
    [ 0.647793] reserve RAM buffer: 000000000009c400 - 000000000009ffff
    [ 0.647795] reserve RAM buffer: 00000000bf27c000 - 00000000bfffffff
    [ 0.647800] reserve RAM buffer: 00000000bf3ec000 - 00000000bfffffff
    [ 0.647804] reserve RAM buffer: 00000000bf46f000 - 00000000bfffffff
    [ 0.647807] reserve RAM buffer: 00000000bf718000 - 00000000bfffffff
    [ 0.647810] reserve RAM buffer: 00000000bf782000 - 00000000bfffffff
    [ 0.647813] reserve RAM buffer: 00000000bf7cc000 - 00000000bfffffff
    [ 0.647816] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
    [ 0.647914] NetLabel: Initializing
    [ 0.647916] NetLabel: domain hash size = 128
    [ 0.647917] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.647930] NetLabel: unlabeled traffic allowed by default
    [ 0.647984] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
    [ 0.647994] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
    [ 0.648001] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.652683] hpet: hpet2 irq 40 for MSI
    [ 0.655983] hpet: hpet3 irq 41 for MSI
    [ 0.659437] hpet: hpet4 irq 42 for MSI
    [ 0.662806] hpet: hpet5 irq 43 for MSI
    [ 0.666188] hpet: hpet6 irq 44 for MSI
    [ 0.679597] Switching to clocksource hpet
    [ 0.685694] pnp: PnP ACPI init
    [ 0.685711] ACPI: bus type pnp registered
    [ 0.686108] pnp 00:00: [bus 00-fe]
    [ 0.686111] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.686113] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.686115] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.686118] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.686120] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.686123] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.686125] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.686127] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.686129] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.686132] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.686134] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.686136] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.686138] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.686140] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.686143] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.686145] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.686147] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.686149] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
    [ 0.686152] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.686215] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.686395] pnp 00:01: [io 0x0000-0x001f]
    [ 0.686423] pnp 00:01: [io 0x0081-0x0091]
    [ 0.686425] pnp 00:01: [io 0x0093-0x009f]
    [ 0.686426] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.686429] pnp 00:01: [dma 4]
    [ 0.686461] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.686568] pnp 00:02: [irq 0 disabled]
    [ 0.686578] pnp 00:02: [irq 8]
    [ 0.686580] pnp 00:02: [mem 0xfed00000-0xfed003ff]
    [ 0.686614] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.686626] pnp 00:03: [io 0x00f0]
    [ 0.686635] pnp 00:03: [irq 13]
    [ 0.686664] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.686677] pnp 00:04: [io 0x002e-0x002f]
    [ 0.686679] pnp 00:04: [io 0x004e-0x004f]
    [ 0.686681] pnp 00:04: [io 0x0061]
    [ 0.686683] pnp 00:04: [io 0x0063]
    [ 0.686684] pnp 00:04: [io 0x0065]
    [ 0.686686] pnp 00:04: [io 0x0067]
    [ 0.686688] pnp 00:04: [io 0x0068]
    [ 0.686692] pnp 00:04: [io 0x006c]
    [ 0.686693] pnp 00:04: [io 0x0070]
    [ 0.686695] pnp 00:04: [io 0x0080]
    [ 0.686697] pnp 00:04: [io 0x0092]
    [ 0.686699] pnp 00:04: [io 0x00b2-0x00b3]
    [ 0.686701] pnp 00:04: [io 0x03e0-0x03e1]
    [ 0.686703] pnp 00:04: [io 0x0680-0x069f]
    [ 0.686704] pnp 00:04: [io 0x0500-0x050f]
    [ 0.686706] pnp 00:04: [io 0x0600-0x0603]
    [ 0.686708] pnp 00:04: [io 0xffff]
    [ 0.686710] pnp 00:04: [io 0x0400-0x047f]
    [ 0.686712] pnp 00:04: [io 0x1180-0x11ff]
    [ 0.686714] pnp 00:04: [io 0x164e-0x164f]
    [ 0.686716] pnp 00:04: [io 0xfe00]
    [ 0.686787] system 00:04: [io 0x03e0-0x03e1] has been reserved
    [ 0.686790] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.686792] system 00:04: [io 0x0500-0x050f] has been reserved
    [ 0.686795] system 00:04: [io 0x0600-0x0603] has been reserved
    [ 0.686798] system 00:04: [io 0xffff] has been reserved
    [ 0.686801] system 00:04: [io 0x0400-0x047f] has been reserved
    [ 0.686803] system 00:04: [io 0x1180-0x11ff] has been reserved
    [ 0.686806] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.686808] system 00:04: [io 0xfe00] has been reserved
    [ 0.686812] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.686855] pnp 00:05: [io 0x0070-0x0077]
    [ 0.686887] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.687090] pnp 00:06: [io 0x0060]
    [ 0.687092] pnp 00:06: [io 0x0064]
    [ 0.687102] pnp 00:06: [irq 1]
    [ 0.687136] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.687159] pnp 00:07: [irq 12]
    [ 0.687192] pnp 00:07: Plug and Play ACPI device, IDs SYN102f SYN1000 SYN0002 PNP0f13 (active)
    [ 0.687294] pnp 00:08: [mem 0xf0501100-0xf05013ff]
    [ 0.687304] pnp 00:08: disabling [mem 0xf0501100-0xf05013ff] because it overlaps 0000:00:1c.3 BAR 14 [mem 0xf0500000-0xf05fffff]
    [ 0.687363] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.687680] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [ 0.687682] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.687685] pnp 00:09: [mem 0xfed1b000-0xfed1bfff]
    [ 0.687687] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.687689] pnp 00:09: [mem 0xe0000000-0xefffffff]
    [ 0.687692] pnp 00:09: [mem 0xf090a000-0xf090afff]
    [ 0.687694] pnp 00:09: [mem 0xc0000000-0xc0000fff]
    [ 0.687696] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
    [ 0.687698] pnp 00:09: [mem 0xfed90000-0xfed93fff]
    [ 0.687700] pnp 00:09: [mem 0xfed40000-0xfed44fff]
    [ 0.687702] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
    [ 0.687704] pnp 00:09: [mem 0xff808000-0xff8080ff]
    [ 0.687706] pnp 00:09: [mem 0xff000000-0xffffffff]
    [ 0.687708] pnp 00:09: [mem 0xfee00000-0xfeefffff]
    [ 0.687789] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.687792] system 00:09: [mem 0xfed1b000-0xfed1bfff] has been reserved
    [ 0.687795] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.687798] system 00:09: [mem 0xf090a000-0xf090afff] has been reserved
    [ 0.687801] system 00:09: [mem 0xc0000000-0xc0000fff] has been reserved
    [ 0.687804] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.687807] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.687809] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.687812] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.687815] system 00:09: [mem 0xff808000-0xff8080ff] has been reserved
    [ 0.687818] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.687821] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.687825] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.687979] pnp 00:0a: [bus ff]
    [ 0.688027] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.688111] pnp: PnP ACPI: found 11 devices
    [ 0.688112] ACPI: ACPI bus type pnp unregistered
    [ 0.695455] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 07-07] add_size 1000
    [ 0.695460] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07-07] add_size 200000
    [ 0.695474] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a-0a] add_size 200000
    [ 0.695489] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b-0b] add_size 200000
    [ 0.695507] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.695511] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.695514] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.695517] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.695523] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
    [ 0.695528] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0300000-0xc04fffff 64bit pref]
    [ 0.695532] pci 0000:00:1c.6: BAR 15: assigned [mem 0xc0500000-0xc06fffff 64bit pref]
    [ 0.695536] pci 0000:00:1c.3: BAR 13: assigned [io 0x6000-0x6fff]
    [ 0.695540] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
    [ 0.695544] pci 0000:00:03.0: PCI bridge to [bus 01-01]
    [ 0.695547] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 0.695552] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff]
    [ 0.695556] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.695561] pci 0000:00:1c.0: PCI bridge to [bus 02-04]
    [ 0.695566] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.695576] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
    [ 0.695585] pci 0000:00:1c.0: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
    [ 0.695597] pci 0000:07:00.0: BAR 0: assigned [mem 0xf0500000-0xf0500fff]
    [ 0.695606] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
    [ 0.695614] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
    [ 0.695623] pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.695632] pci 0000:00:1c.3: bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
    [ 0.695643] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
    [ 0.695651] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
    [ 0.695661] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf06fffff]
    [ 0.695670] pci 0000:00:1c.4: bridge window [mem 0xc0300000-0xc04fffff 64bit pref]
    [ 0.695681] pci 0000:00:1c.6: PCI bridge to [bus 0b-0b]
    [ 0.695689] pci 0000:00:1c.6: bridge window [io 0x5000-0x5fff]
    [ 0.695699] pci 0000:00:1c.6: bridge window [mem 0xf0400000-0xf04fffff]
    [ 0.695708] pci 0000:00:1c.6: bridge window [mem 0xc0500000-0xc06fffff 64bit pref]
    [ 0.695719] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
    [ 0.695810] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.695819] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.695822] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.695824] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.695827] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.695829] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.695832] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.695834] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
    [ 0.695837] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.695839] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
    [ 0.695842] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.695844] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 0.695847] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf03fffff]
    [ 0.695849] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref]
    [ 0.695852] pci_bus 0000:07: resource 0 [io 0x6000-0x6fff]
    [ 0.695854] pci_bus 0000:07: resource 1 [mem 0xf0500000-0xf05fffff]
    [ 0.695857] pci_bus 0000:07: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
    [ 0.695860] pci_bus 0000:0a: resource 0 [io 0x4000-0x4fff]
    [ 0.695862] pci_bus 0000:0a: resource 1 [mem 0xf0600000-0xf06fffff]
    [ 0.695865] pci_bus 0000:0a: resource 2 [mem 0xc0300000-0xc04fffff 64bit pref]
    [ 0.695867] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff]
    [ 0.695870] pci_bus 0000:0b: resource 1 [mem 0xf0400000-0xf04fffff]
    [ 0.695872] pci_bus 0000:0b: resource 2 [mem 0xc0500000-0xc06fffff 64bit pref]
    [ 0.695875] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
    [ 0.695877] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
    [ 0.695880] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.695882] pci_bus 0000:0c: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.695885] pci_bus 0000:0c: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.695887] pci_bus 0000:0c: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.695889] pci_bus 0000:0c: resource 10 [mem 0xc0000000-0xfebfffff]
    [ 0.695937] NET: Registered protocol family 2
    [ 0.696062] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.696834] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.700123] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.700521] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.700523] TCP: reno registered
    [ 0.700532] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.700576] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.700689] NET: Registered protocol family 1
    [ 0.700925] pci 0000:01:00.0: Boot video device
    [ 0.700998] PCI: CLS 64 bytes, default 64
    [ 0.701042] Unpacking initramfs...
    [ 0.770927] Freeing initrd memory: 2876k freed
    [ 0.771345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.771348] Placing 64MB software IO TLB between ffff8800bb27c000 - ffff8800bf27c000
    [ 0.771350] software IO TLB at phys 0xbb27c000 - 0xbf27c000
    [ 0.771376] Simple Boot Flag at 0x36 set to 0x1
    [ 0.772092] audit: initializing netlink socket (disabled)
    [ 0.772103] type=2000 audit(1340054803.739:1): initialized
    [ 0.772500] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.774515] VFS: Disk quotas dquot_6.5.2
    [ 0.774565] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.774667] msgmni has been set to 7888
    [ 0.774904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.774945] io scheduler noop registered
    [ 0.774947] io scheduler deadline registered
    [ 0.775005] io scheduler cfq registered (default)
    [ 0.775409] intel_idle: MWAIT substates: 0x1120
    [ 0.775425] intel_idle: v0.4 model 0x1E
    [ 0.775426] intel_idle: lapic_timer_reliable_states 0x2
    [ 0.775522] GHES: HEST is not enabled!
    [ 0.775587] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.776198] Linux agpgart interface v0.103
    [ 0.776298] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.778912] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.780103] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.780135] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.780159] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.780182] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.780206] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.780325] mousedev: PS/2 mouse device common for all mice
    [ 0.780386] rtc_cmos 00:05: RTC can wake from S4
    [ 0.780540] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.780579] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.780731] cpuidle: using governor ladder
    [ 0.780936] cpuidle: using governor menu
    [ 0.781081] TCP: cubic registered
    [ 0.781191] NET: Registered protocol family 10
    [ 0.781396] NET: Registered protocol family 17
    [ 0.781401] Registering the dns_resolver key type
    [ 0.781617] PM: Hibernation image not present or could not be loaded.
    [ 0.781628] registered taskstats version 1
    [ 0.782385] rtc_cmos 00:05: setting system clock to 2012-06-18 21:26:43 UTC (1340054803)
    [ 0.782538] Initializing network drop monitor service
    [ 0.787227] Freeing unused kernel memory: 740k freed
    [ 0.787390] Write protecting the kernel read-only data: 8192k
    [ 0.798480] Freeing unused kernel memory: 1588k freed
    [ 0.803291] Freeing unused kernel memory: 640k freed
    [ 0.809999] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.820218] udevd[71]: starting version 185
    [ 0.862439] usbcore: registered new interface driver usbfs
    [ 0.862464] usbcore: registered new interface driver hub
    [ 0.862584] usbcore: registered new device driver usb
    [ 0.864859] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.864926] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.864935] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 0.864962] SCSI subsystem initialized
    [ 0.864965] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.865005] ehci_hcd 0000:00:1a.0: debug port 2
    [ 0.869004] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.869030] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0906000
    [ 0.871261] libata version 3.00 loaded.
    [ 0.876370] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.876586] hub 1-0:1.0: USB hub found
    [ 0.876591] hub 1-0:1.0: 3 ports detected
    [ 0.876821] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.876830] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 0.876839] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.876872] ehci_hcd 0000:00:1d.0: debug port 2
    [ 0.880874] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.880892] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0907000
    [ 0.889704] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.890152] hub 2-0:1.0: USB hub found
    [ 0.890161] hub 2-0:1.0: 3 ports detected
    [ 0.890447] ahci 0000:00:1f.2: version 3.0
    [ 0.890546] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
    [ 0.890615] ahci: SSS flag set, parallel bus scan disabled
    [ 0.890674] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x39 impl SATA mode
    [ 0.890686] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
    [ 0.890697] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.911919] scsi0 : ahci
    [ 0.912284] scsi1 : ahci
    [ 0.912722] scsi2 : ahci
    [ 0.913201] scsi3 : ahci
    [ 0.913668] scsi4 : ahci
    [ 0.914080] scsi5 : ahci
    [ 0.914267] ata1: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908100 irq 45
    [ 0.914274] ata2: DUMMY
    [ 0.914277] ata3: DUMMY
    [ 0.914288] ata4: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908280 irq 45
    [ 0.914297] ata5: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908300 irq 45
    [ 0.914305] ata6: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908380 irq 45
    [ 1.183077] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.233004] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.234228] ata1.00: ATA-8: Hitachi HTS725050A9A360, PC4OC71E, max UDMA/133
    [ 1.234236] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.235728] ata1.00: configured for UDMA/133
    [ 1.236338] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72505 PC4O PQ: 0 ANSI: 5
    [ 1.307636] hub 1-1:1.0: USB hub found
    [ 1.307879] hub 1-1:1.0: 6 ports detected
    [ 1.416267] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.540814] hub 2-1:1.0: USB hub found
    [ 1.540943] hub 2-1:1.0: 8 ports detected
    [ 1.556222] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.609698] usb 1-1.6: new high-speed USB device number 3 using ehci_hcd
    [ 1.696049] hub 1-1.6:1.0: USB hub found
    [ 1.696420] hub 1-1.6:1.0: 4 ports detected
    [ 1.772758] Refined TSC clocksource calibration: 1728.999 MHz.
    [ 1.772767] Switching to clocksource tsc
    [ 1.806556] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
    [ 1.876031] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.877305] ata5.00: ATAPI: MATSHITABD-CMB UJ141EL, 1.00, max UDMA/100
    [ 1.879554] ata5.00: configured for UDMA/100
    [ 1.885075] scsi 4:0:0:0: CD-ROM MATSHITA BD-CMB UJ141EL 1.00 PQ: 0 ANSI: 5
    [ 1.963102] usb 1-1.6.3: new low-speed USB device number 4 using ehci_hcd
    [ 2.081481] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.3/1-1.6.3:1.0/input/input1
    [ 2.081639] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1.6.3/input0
    [ 2.087742] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.3/1-1.6.3:1.1/input/input2
    [ 2.087898] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1.6.3/input1
    [ 2.087938] usbcore: registered new interface driver usbhid
    [ 2.087942] usbhid: USB HID core driver
    [ 2.122996] usb 1-1.6.4: new full-speed USB device number 5 using ehci_hcd
    [ 2.202563] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.212058] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.212151] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.212155] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.212192] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.212943] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.4/1-1.6.4:1.0/input/input3
    [ 2.213029] generic-usb 0003:1532:0016.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1a.0-1.6.4/input0
    [ 2.216135] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.216142] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.216400] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 2.289258] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
    [ 2.292307] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.310870] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.444092] udevd[177]: starting version 185
    [ 5.002214] loop: module loaded
    [ 5.065477] vboxdrv: Found 8 processor cores.
    [ 5.066064] VBoxDrv: dbg - g_abExecMemory=ffffffffa01d0080
    [ 5.068417] vboxdrv: fAsync=0 offMin=0x19f offMax=0x349c9
    [ 5.068586] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 5.068591] vboxdrv: Successfully loaded version 4.1.16_OSE (interface 0x00190000).
    [ 5.281919] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
    [ 5.291812] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    [ 5.291980] ACPI: Power Button [PWRB]
    [ 5.292078] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
    [ 5.293167] ACPI: Lid Switch [LID]
    [ 5.293233] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    [ 5.293269] ACPI: Power Button [PWRF]
    [ 5.337928] firewire_ohci 0000:07:00.0: enabling device (0104 -> 0106)
    [ 5.391330] firewire_ohci 0000:07:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
    [ 5.392558] EDAC MC: Ver: 2.1.0
    [ 5.393911] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
    [ 5.403663] iTCO_vendor_support: vendor-support=0
    [ 5.414889] atl1c 0000:0b:00.0: version 1.0.1.0-NAPI
    [ 5.420966] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 5.421163] iTCO_wdt: Found a PM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 5.421406] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 5.486165] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.489677] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.493598] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.494085] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.494588] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.494973] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.495403] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.495752] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.496144] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
    [ 5.496599] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 5.505428] input: PC Speaker as /devices/platform/pcspkr/input/input7
    [ 5.522793] ACPI: AC Adapter [ACAD] (on-line)
    [ 5.523752] acpi device:02: registered as cooling_device0
    [ 5.523855] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
    [ 5.523909] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 5.526016] ACPI: Requesting acpi_cpufreq
    [ 5.536953] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
    [ 5.536961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 5.626562] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.626568] ACPI: Thermal Zone [THRM] (58 C)
    [ 5.891343] firewire_core 0000:07:00.0: created device fw0: GUID 01cf13fe00000700, S400
    [ 5.971026] ACPI: Battery Slot [BAT1] (battery present)
    [ 5.972094] wmi: Mapper loaded
    [ 6.108672] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
    [ 6.113558] input: Toshiba input device as /devices/virtual/input/input9
    [ 6.124400] sdhci: Secure Digital Host Controller Interface driver
    [ 6.124402] sdhci: Copyright(c) Pierre Ossman
    [ 6.172992] nvidia: module license 'NVIDIA' taints kernel.
    [ 6.172995] Disabling lock debugging due to kernel taint
    [ 6.181396] nvidia 0000:01:00.0: power state changed by ACPI to D0
    [ 6.181403] nvidia 0000:01:00.0: power state changed by ACPI to D0
    [ 6.181419] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 6.181624] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12 16:03:22 PDT 2012
    [ 6.186591] Registered led device: toshiba::illumination
    [ 6.190693] sdhci-pci 0000:07:00.1: SDHCI controller found [1217:8120] (rev 1)
    [ 6.190943] Registered led device: mmc0::
    [ 6.192014] mmc0: SDHCI controller on PCI [0000:07:00.1] using ADMA
    [ 6.228634] rtl8192se: FW Power Save off (module option)
    [ 6.228664] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
    [ 6.228665] Loading firmware rtlwifi/rtl8192sefw.bin
    [ 6.251712] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [ 6.262400] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 6.317500] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
    [ 6.320857] hda_intel: Disabling MSI
    [ 6.427141] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1e0b1, caps: 0xd04733/0xa40000/0xa0000
    [ 6.469682] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
    [ 6.717972] Linux media interface: v0.10
    [ 6.729300] Linux video capture interface: v2.00
    [ 6.997745] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b130)
    [ 7.020114] input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input12
    [ 7.020201] usbcore: registered new interface driver uvcvideo
    [ 7.020204] USB Video Class driver (1.1.1)
    [ 7.153982] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
    [ 7.154292] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
    [ 7.154446] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
    [ 7.154578] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16
    [ 13.241349] EXT4-fs (sda6): re-mounted. Opts: (null)
    [ 13.273608] EXT4-fs (sda5): mounted fi

    nTia89 wrote:try to downgrade the kernel with a working version
    Thanks for your reply! Actually, yesterday I upgraded to the new kernel (version 3.4.3-1) and my laptop has not freezed since then. So, maybe I will wait for a couple of days and hopefully mark this as solved.

  • Qosmio X505-Q870

    I had my laptop for about two years now and it has worked great with the exception of it overheating. Now I am starting to have a number of issues:
    1. Blue screen memory dump while playing games. It said something about Kendal hardware. I did research and it said that this is an idication of hardware damage.
    2. Computer freezing while playing games
    3. Computer freezing just being on desk top.
    4. Blue screen memory dump while on desk top
    5. Screen going black while playing games.
    6. screen going black while on desk top
    7. Windows freezing while computer is starting up.
    8. I was playing a game and my computer started making a random noise then shut down.
    9. was doing a memory diagnostic and it completed but when windows was starting up again my computer froze so I was not able to see the report.
    I did scan disk, did a computer restore point, defragment and some other stuff. I think it may be hardware damage because the computer over heated. And all of these problems just started happening all at once.. it did not snow ball or anything. Any advice would be great. Thank you.

    I agree with GordOfTheJungle, it is probably due to the overheating issue.  If it is under warranty, definitely take advantage of the factory service.  If it isn't, and you are not a "do it yourself" type person, then a repair center is the way to go.  If you work on your own systems, the X505 is a little more complex to service than most of the laptops I have worked on, but not by much.
    I would highly recommend cleaning the vents at least once a year, and applying fresh Artic Silver thermal compound to the processor.  Even running an extreme processor in my X505, I have not experienced any cooling issues.
    Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
    Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

  • Qosmio X505 - Q870 Freezing Problem PLS HELP !!!

    hello everyone
    i have toshiba qosmio x505 q870 with nvidia gts 360m. core i7 q720 @1.6
    i have this strange problem .. the laptop freezes recently alot that im not being to use it, it happens not in particular situation .. it may happen in any time in anything you are doing. last time happened, i was logging in.
    i wish to know whats the problem .. after freezing the only thing that i can do is ahard shut down by keep pressing the power button.
    i tried mem test to check the rams .. no errors i have 8gb ram.
    i tried scanning the hard disk for bad sectors .. also nth, i have 128 gb ssd
    ( the laptop came with 500gb hitachi 7200rpm, i added SSD 128gb Kingston later )
    and another 500gb seagate 7200 rpm.
    i tried replacing rams .. still happening.
    i used the laptop without battery only on power still happening.
    i used the battery alone also happened.
    i changed the windows copy yes it freezed.
    some times when it happens i take off the battery and take of the rams and keep pressing the power button to reset the laptop thing about electricity, thats what they told me .
    Then it will happen but after awhile. one time i did this thing:
    i disassembled the laptop with eveything out and did a cleaning for eveyrhing ( bearing in mind it wasnt full of dust or anything it was clean ) and then reinstalled everything in place.
    That was a while ago..
    After that it took awhile before rehappening, something about a month . and one time happened during the installtion of windows =S
    i tried eveything .. i updated all the drivers, uninstall reinstall, i did a recovery i did eveything with no results no over heating problems
    i asked the support center and they didnt figure out whats causing. they did not figure out the problem soo... to show me that they are a good costumer care center they told me that they want to replace :
    1. motherboard 280 $
    2. graphic card 600 $
    3. 2 x 4 gb ram 100 $
    4. HDD 70 $
    the laptop is out of warranty and im sure i wont do such a thing ..
    all of that to be replaced just because they did not figure out.
    and im the one whos gonna cry !
    im sure that this solution is not the right one.
    i tried four different HDD same result and as i mentioned .. one of them was during the installation of windows during the recovery ...
    i almost tried eveything i tried to run with one memory module, then the other module, and see if either provides more stability. For clarity, let's call one RAM 1 and the other RAM 2. and i have two slots; call them slot 1 and slot 2. Try RAM 1 in slot 1 with slot 2 empty. If that does not allow the system to work well, try RAM 1 in slot 2 with slot 1 empty. If that does not provide more stability, try RAM 2 in slot 1 with slot 2 empty. If that still is not stable, try RAM 2 in slot 2 with slot 1 empty. still freezing =(
    Plus .. i tried 8 different rams modules 1 in 1 , 1 in 2, 2 in 1, 2 in 2 and goes on .. etc .. still freezing .. i tried eveything humanty can do ..
    i guess im gonna buy a robot and let him set, think, work, and figure out whats causing ..
    after all im guessing its sth about electricity .. i think thats theres atiny black thing in the motherboard causing loose or giving more static or delivering more or less electricity to some parts or anything like this .
    who knows ... my humanty after i did all that made think like this .. or lets say its BY LOGIC .. Please Anyone can Help ... !!
    anyone can help =( im disperate

    A FIX THAT WORKS SO FAR!
    I have a x505 - q870 myself and have had problems with freezing for a long time - till a few days ago, it began to freeze at random times even 15 minutes after boot, making the laptop unusable. I use a cooling pad, and that didn't help either. I thought it maybe a corrupt OS, bad memory or a heating problem.
    I found this toshiba form post and on advice decided to unseat and reseat the CMOS battery. WARNING: this takes time and patience, you have to disassemble the entire laptop to get to the motherboard. I'll attach an X505 service manual that I found a while ago.
    While getting to the CMOS battery, I also discovered that the fans had a carpet layer of dust/lint covering the rear vents (after 2 years heavy travel and use). I cleaned these out (with air), unseated and reseated the battery, and reassembled the laptop. You will have to update system time on first boot. VOILA! I have had the laptop working for two days now, no freezing yet! I am guessing a couple of reasons:
    1. Hard resetting the motherboard did something magical - worth a try.
    2. Cleaning dirt blocking vents under the motherboard definitely helped heating issues. You may not have this problem. But in any case, do you use a cooling pad?
    If you are out of warranty (like me) and have some technical knowledge, I suggest you give this a try. Since I did this I have not had a freeze yet after constant use! This after having repeated freezes every hour of use is definitely an improvement.
    Attachments:
    x505 manual.pdf ‏6441 KB

  • Toshiba Qosmio X505-Q720 Screen Problem when Tilting

    Toshiba Laptop Qosmio X505-Q720
    Please, help !
    The screen goes blank at certain (more than 90deg) angles of the screen with respect to the base of my laptop.
    The Web Camera is also not working.
    An external monitor works perfectly.
    I assume some connecting cables are loose behind the screen.
    Can I fix this issue myself ?

    Good job on the diagnosis. Sounds like either a loose cable or the cable is damaged and loses the connection once you tilt the screen too far. My recommendation would be to take it into a Toshiba authorized repair center and get it serviced. A couple reasons, they have the Maintenance Manuals and know how to service the computer and two, they can order the right parts if needed. The reasons for not servicing this yourself is that the LCD screen is an expensive part to replace and these laptops with their small parts can be a problem to work on.

  • Qosmio X505-Q875 - Can't install my work software package

    I have to say I'm extremely disappointed in Toshiba. I'm a small business owner and use some pretty advanced software for which I pretty much need a gaming style laptop for. After looking at many different companies, including custom high end builders, I settled on a x505-q875 that I purchased from Newegg.
    First of all, I couldn't even install my primary work software package. This software uses a USB hasp for anti-piracy. The HASP wouldn't install, no matter what I did. After exhausting my options, I opted for a clean install of Windows. I have a full Windows 7 license which allows for laptop installation. So I wiped the laptop clean and started with a clean slate. I go onto the Toshiba website to get the component drivers and ...whoa!...they aren't there! Luckily for me, and a couple of hours into the process, I did manage to find a driver for the Nvidia GTS 360m. Fortunately, some guy had posted online a workable driver that supports the 360M. That one could have sunk me. This laptop had to be operational for a business trip I am going on tomorrow.
    I hope Toshiba reps at least browse this forum and if so, these are the points I would like to make.
    1) If you have released units to resellers of any product, there HAS to be driver support online. I never make backup discs as I've never had to. Every time I ever needed a driver, it was on the support site. There is no excuse for this. This product doesn't have a "release date". As a consumer, when I purchase something, I expect the support to be available when the product hits the shelves.
    2) In your "detailed" product specs, how about mentioning who supplied the wi-fi cards? Simply saying "Wi Fi Card" really isn't going to help anyone fishing for a driver. Thankfully, you guys haven't changed and it was still the RealTek wireless card.
    3) It is important that Windows be left as vanilla as possible, for people like myself who use these things for business. A lot of business productivity software does not like being installed on OEM modded versions of an operating system. I don't know if it were the mods or the 50 tons of bloatware on the machine but when I can't get a USB device to install, thats a serious issue. As for the bloatware, how about making most of it downloadable content? Most people have no need for most of the stuff you cram into the machine.
    So in closing, a disappointing experience so far. I hope the machine is problem free from this point on because I invested 7 hours in diagnosing, searching, pulling my hair out, reinstalling operating systems, etc. Now that the slate is clean, the thing works like a champ with my software.

    > 1) If you have released units to resellers of any product, there HAS to be driver support online. I never make backup discs as I've never had to. Every time I ever needed a driver, it was on the support site. There is no excuse for this. This product doesn't have a "release date". As a consumer, when I purchase something, I expect the support to be available when the product hits the shelves.
    Qosmio X505-Q875 belongs to Toshiba US series and the drivers should be downloaded from the Toshiba US page.
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
    There you can find everything regarding the Qosmio X505-Q875.
    > 2) In your "detailed" product specs, how about mentioning who supplied the wi-fi cards? Simply saying "Wi Fi Card" really isn't going to help anyone fishing for a driver. Thankfully, you guys haven't changed and it was still the RealTek wireless card.
    Qosmio X505-Q875 and other notebook series are equipped with different WLan cardsIntel, Atheros or Realtek. At the bottom of the unit you can find a label which contains a info what WLan card has been installed or go to device manger and check VendorID to get details about WLan chip manufacturer. ;)
    > 3) It is important that Windows be left as vanilla as possible, for people like myself who use these things for business. A lot of business productivity software does not like being installed on OEM modded versions of an operating system. I don't know if it were the mods or the 50 tons of bloatware on the machine but when I can't get a USB device to install, thats a serious issue. As for the bloatware, how about making most of it downloadable content? Most people have no need for most of the stuff you cram into the machine.
    Dont understand what you want to say and what you mean by bloatware but the point is that new generation notebooks supports a lot of different features which need to be controlled by software
    Of course you can remove everything what you want but you should not wonder if some feutures like FN buttons, multimedia buttons, face reorganization, power saving eco mode etc will not functions
    If you are not able to install the 3rd USB device then you should get in contact with this USB device manufacture. Maybe there are some Win 7 compatibility issues
    I installed Win 7 on my Toshiba notebook and everything is running like a dream all devices are recognized. I have managed to collect the Win 7 drivers at my own hand but this is not really a problem for common notebook user like me who know how to use google and search in internet
    Greets

  • Toshiba Qosmio X505 plugged in, not charging message

    I have a Toshiba Qosmio X505 that is almost 4 years old and have some power issues.  The battery is drained to about 6% and the battery icon in the tool bar has the plug symbol for a second then it goes away then comes back and goes away.... it keeps flashing like this.  When I move the mouse over the battery icon it says plugged in, not charging.  I have tried every solution I have found on line with no luck.  I have removed the battery and ac charger and then held the power button for 30 seconds, I have cleaned the connections, I have re-installed the battery about 10 times, I have rebooted all to no avail.
    When I remove the ac adapter the power light is off and the battery light is orange.  When I remove the battery and plug in the ac adapter the power light is steady red.  As soon as I put the battery in the ac power light begins to blink on and off.  The computer does not power on with the battery removed and the ac adapter plugged in (but I'm not sure if it's supposed to). I will also add that in the last week or so when I power on I would get a black screen saying an NTFS file is bad and the machine wants to do a disk check.  The disk check never runs, even when I try to do it manually.
    I have read this could be a motherboard issue, an ac adapter issue, or a battery issue.  I am hopoing a replacement battery fixes the problem.  Before buying a battery I was hoping someone had some info to share.  Thanks

    I bought a battery hoping that takes care of the problem.  If that doesn't work I will try a new adapter and if that doesn't work I will probably just remove the hard drive and use it as an external on a new machine.  Seems there really isn't a whole lot of info out there about this problem other than the start button solution. 

  • Qosmio X505 Hardware Lockups: 3 for 3

    Hello, Toshibers--
    I bought a Qosmio X505-Q870 from Fry's last Saturday. After about 12 hours of use, it locks up. Hard lock up: No mouse, no keyboard, nothing. After the second lockup in a few hours, I took it back.
    I got the replacement Sunday night, and it started locking up, too, after just a few hours. Any sane person would have given up on the Qosmio at this point, but I love the screen. It's just so easy on the eyes.
    Besides, hey, with Fry's who knows. So I order the Qosmio X505-Q875 from NewEgg.com. And, sure enough, the package from NewEgg has a genuine Toshiba Factory Seal on it, where the Fry's machines didn't.
    Tragically, after a few hours, the new machine locks up. Well, hell.
    At least, at this point, I don't think it's a fluke hardware issue. I suspect drivers. I'm downloading the Windows updates while I write this—this is the second time I'm writing this because the machine locked up during the download/update—but the updates don't look that promising.
    I had put up GodMode on the first two machines before they froze, so I thought that might be it, but no dice. The third one crashed with no GodMode. They've frozen twice with the webcam on. But they freeze with nothing in particular going on, too.
    The three installs have certain things in common. My feeling is that in no way should any of these steps be cause for hard lockups. I've not even gotten to installing my development software, and the machines don't seem to be running hot, and the fans seem okay, when they lock up.
    But here are the things I do, in the order that I've done them, for all three machines.
    Start IE, install Chrome. All subsequent browsing is done with Chrome.
    Install Flash for Chrome.
    Install Pidgin.
    Install Opera, set up mail.
    Install Sun VirtualBox. I haven't actually run this on two of the three machines, but it's been installed.
    On the first two machines I installed OpenOffice.org. The third one locked up before I had a chance to.
    This is my tale of woe. I do love the machine, but if it hard locks every few hours, it has obviously limited utility.
    I've updated windows and killed the webcam app. If that doesn't cure it, I'll kill everything and see if that helps.
    Unless anyone has a lead.
    ===Blake==

    Eh. It's good enough for me. I definitely looked at some log that was supposed to say what had happened and it gave no information except to say there had been an improper shutdown. (I guess that would have to be the Event Log, but MS changes the locations of all these things enough with every version that I can't be sure.)
    While MS's track record is abysmal, I haven't seen a genuine hardware lockup—that wasn't actually due to a hardware problem (RAM, MoBo, HD being most common three)—since Windows 2000. I did skip Vista however.
    Search: "windows 7 crashing flash". I doubt that is hardware related, no need to RMA before exhausting the software side.  
    Of course, I did that extensively with laptop two and three, since the odds of dual hardware failures in exact the same way seemed improbable. What I saw then and what I see now is that these search results talk about Windows 7 with Flash causing Firefox/Chrome crashing but not hardware lockups.  
    Well, wait, I do see one now. All during overt Flash activity. The weird thing is that this machine locks up even if Flash isn't apparently being used. (But I think there are some resident Flash programs that aren't always visible.)
    Anyway, unfortunately for Toshiba, the onus falls upon them to give me a working machine. That's the cost of doing business with MS. And they're probably going to end up with two returns (unless Fry's just re-boxes them). If Windows 7 is unstable, they should ship the machines with XP until 7 is ready.
    Figures, though: Only MS would take a stable OS and replace it with an unstable one.

  • I tried watching videos using various apps such as meta tube etc.. But after 10 secs instead of video "Q" water mark comes and sound goes on. Can someone help?

    I tried watching videos using various apps such as meta tube etc.. But after 10 secs instead of video "Q" water mark comes and sound goes on. Can someone help?

    The only app you specifically mention is meta tube. No way to tell from the description on the app page where they source the material (I suspect primarily YouTube), and no reviews as of yet. You might want to contact the vendor.
    If you are getting the same results from established streaming apps, such as YouTube or Jasmine, I would say you have a connection speed issue (keeping the stream from properly buffering). Hard to say.
    Try a rest: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

Maybe you are looking for

  • Can't find filecache to stop ICERegions.htm errors on opening dw cs4

    Hi I have recently started getting this error on opening DW cs4. "The following translators were not loaded due to errors ICERegions.htm has configuration that is invalid" I also get javascript errors when I try to save (although save us seems to wor

  • Is the value numeric?

    Hi All, I am on v11.2.0.3 Its the same old question. I want to check if a given value is a valid numeric value or not? Is there a function for that in SQL? I know I can write declare begin    v1 := TO_NUMBER ( v2 ) ; exception when others then   < if

  • Designer Error CDS-18008

    When attempting to generate a table to a database, I recieve the following error: CDS-18008 Error: An unexpected SGParameterException exception 'null argument' was raised in file ..\cddo\cddoie.cpp function cddoie_index_entry::cddoie_index_entry and

  • LimitFilter pagination issue

    I have a new pagination framework used by a GUI client that passes the filter criteria and the page number. The problem I am having is that I see unpredictable page results with the new version of coherence (3.6.1) compared to 3.3.1 For ex the data s

  • I need to install acrobat pro on a new laptop

    Earlier I had subscribed to acrobat pro now that laptop has crashed want to install in new laptop