Qosmio X70-A-12 and new BIOS - FILE NOT FOUND

ifi would to download the brandnew BIOS driver (20/12/2013 - 1.40 WIN) i get an 404 !!!
http://www.toshiba.at/innovation/download_bios.jsp?service=AT
Thx for fixing that SOON
Qosmio X70-A-12

how long must we wait?
it is simply not acceptable that you are selling gaming notebooks, which you can not play because you have to have the fear start to burn them!!
finally brings a bios driver out cools this whole s***.
your support is very very bad.
if you have a problem you will be redirected to the forum where nobody helps or granted only s***** advices.
or you should call the expensive special phone number for 1 per minute but please.
I have a qosmio x70 a12, which has cost me nearly 2000 .
I can think for this amount of money you expect service and not dead left (bios 404) or during the day no download limit.
I'm almost compelled, the system cpu to throttle 100mV does not run out of laptop due to overheating. and in battlefield bad company 2 from the year 2010!

Similar Messages

  • Each time I start up my computer and have my iPhone plugged in, I get a message window that eads "New Wave" file not found in your files....How do I get this file I am missing?

    Each time I start up my computer and have my iPhone plugged in, I get a message window that eads "New Wave" file not found in your files....How do I get this file I am missing?

    Hey Podieboy,
    Thanks for the question. It sounds like you are receiving a message about missing files when you start iTunes. The following resource may provide more information:
    iTunes: Finding lost media and downloads - Apple Support
    http://support.apple.com/en-us/TS1408
    If the file/song is not important, you can simply delete it from your library to avoid this error message in the future:
    iTunes 12 for Windows: Delete songs, playlists, or other items
    http://support.apple.com/kb/PH20391
    Thanks,
    Matt M.

  • H61M-P21 (B3)Updating Bios File not found

    Tried to up date my H61M-P21(B3) Motherboard using the  7680vJ0.exe file on a usb stick  from the MSI web site Version 19.0   Failed to update now can not get in to bios setup and just get a message..   Updating BIOS..................File not found
    Can some one send me a link to the file I need to put on the usb stick? or email me the file please? All I have on the sitck at the moment is EIVB.BIN 7680vJ0.exe and a folder called XPELXR2X that is empty.Or do I have to rename the EIVB.BIN to somthing?
    Cant acess the biose menu or the boot device menu so Im stuck any help would be very much appreciated...sorry think I posted this in the wrong section before
    Thanks Tony

    Quote from: oztony on 23-June-12, 16:13:57
    Ok formated with hp tool put the  7680vJ0.exe  and got       updating bios .......bios file not found! no dos prompt if I could get to the dos prompt I thin I could flash maualy with FUDE238.EXE
    Yup. That would probably work. I don't know. Not sounding good. Is there a reasonable priced pc shop in your area that has an SPI flash programming device that could flash the chip for you?

  • Really at a loss on this., both apexins and apxldimg give 'file not found'

    I am sure the correct parameter is being supplied. This is on windows 7 64 bit platform.
    SQL> @apxldimg C:
    PL/SQL procedure successfully completed.
    old 1: create directory APEX_IMAGES as '&1\apex\images'
    new 1: create directory APEX_IMAGES as 'C:\apex\images'
    Directory created.
    file not found: /doc/aadm_chng_day.htm
    file not found: /doc/adm_email.htm
    file not found: /doc/adm_request_notif.htm
    file not found: /doc/advnc_web_invoke.htm
    file not found: /doc/api007.htm
    file not found: /doc/bldapp_appgroup.htm
    file not found: /doc/bldapp_srch_item.htm
    file not found: /doc/bldapp_wiz_pg_def.htm
    file not found: /doc/deploy_app_id.htm
    file not found: /iu_option.gif
    file not found: /oracle.gif
    file not found: /reg_temp_edit.gif
    PL/SQL procedure successfully completed.
    PL/SQL procedure successfully completed.
    Commit complete.
    timing for: Load Images
    Elapsed: 00:00:22.38
    Directory dropped.
    SQL> spool off
    Any help is most appreciated.

    apex 3.1 on oracle 11.2...
    Increased session_max_open_files and re-ran receiving below output.. i do get proper images displayed on login page now;however, not sure everything is still 100% correct.
    SQL> @apxldimg_mod G:\oracleSoftware
    PL/SQL procedure successfully completed.
    old 1: create directory APEX_IMAGES as '&1\apex\images'
    new 1: create directory APEX_IMAGES as 'G:\oracleSoftware\apex\images'
    Directory created.
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    -21560 ORA-21560: argument 3 is null, invalid, or out of range
    PL/SQL procedure successfully completed.
    PL/SQL procedure successfully completed.
    Commit complete.
    timing for: Load Images
    Elapsed: 00:00:46.97
    Directory dropped.
    SQL>

  • SAP ME 6.0 Visual Test and Repair Local file not found

    Hi,
    In our SAP ME 5.2 environment we have Test & Repair installed on a separate server. On that server we also have a shared directory where we are placing our GenCad files (.CAD). These files we can sucessfully view in the POD on SAP ME 5.2.
    Now I am trying out SAP ME 6.0. I have done:
    - Installed Product Visualization 7.2 on my client device
    - In System Rule maintenance I have set the rule VTR Model Location to point to our server where our GENCAD files are stored.
      i.e ServerXXX
    - In material maintenance for manufactured material A I have set the drawing name to point to the shared directory and .CAD file.
      i.e D:/CADfiles/productname.CAD
    - Created and released a shop order for material A
    - Started the "POD - Visual test and Repair"
    Entered operation
    Entered Resource
    Entered SFC for the shop order that is using the manufactured material with
    Pressed "Start" - The SFC is now active in the operation.
    Pressed "Model viewer" button
    A part of the screen now says "Visual test and Repair" - 3D Model viewer. It is blinking a couple (3) of times, but nothing appears. When I press the "Model viewer" button once more. An error message says "Local file not found".
    What is happening? Is GenCad files suddenly not working in Test and Repair? I have read something about purchasing ECAD file converters, is this what I need?
    Br,
    Johan

    Problem solved after asking for eCAD converter licenses from Right Hemisphere.
    /Johan

  • New weblogs file not found

    Hello. I just set up weblogs for the first time. I enabled weblogs in server admin and chose a theme. I left the default folder for storing files as it was, but I can't access weblogs from the web. I have several sites on my server. I have tried all of them in each of these ways - http://domainname.com/weblog, http://www.domainname.com/weblog and I have even tried using my ip address instead of my domain names. Every time, I get error 404 file not found. Does anyone know what might be going on here? Thanks in advance.

    Ok i may have a fix for the vanishing entries broken server and such ..
    What 10.4.6 messes a LOAD with is actually our good ole posix files ..
    Most of my files inside /Library/Tomcat/blojsom_root/webapps/ROOT/WEB-INF/<USERNAME>/ were set back to root:admin ...
    Charming isnt it ? Of course there are NO Ways (POSIX) the process can access these .. so you have to modify a few things .
    First : Stop application server and webservices.
    Second : make sure permissions inside /Library/Tomcat/blojsom_root/webapps/ROOT/WEB-INF/<USERNAME>/ will list as follow :
    1626760 drwxr-xr-x 12 appserve appserve 408 Jun 18 04:14 .
    631548 drwxrwx--- 17 appserve appserve 578 Jun 18 04:02 ..
    1626761 -rw-r--r-- 1 appserve appserve 65 Jun 18 04:02 authorization.properties
    1626762 -rw-r--r-- 1 appserve appserve 1029 Jun 18 04:00 blacklist.filters
    1626763 -rw-r--r-- 1 appserve appserve 1611 Jun 18 04:02 blog.properties
    1626764 -rw-r--r-- 1 appserve appserve 138 Jun 18 04:00 contextloader.properties
    1626765 -rw-r--r-- 1 appserve appserve 543 Jun 18 04:01 emoticons.properties
    1626766 -rw-r--r-- 1 appserve appserve 593 Jun 18 04:00 flavor.properties
    1626767 -rw-r--r-- 1 appserve appserve 97 Jun 18 04:01 macros.properties
    1626768 -rw-r--r-- 1 appserve appserve 709 Jun 18 04:00 plugin.properties
    1626769 -rw-r--r-- 1 appserve appserve 192 Jun 18 04:00 referer.properties
    1626770 -rw-r--r-- 1 appserve appserve 117 Jun 18 04:00 showmemore.properties
    if they dont run the following sudo ed commands .
    chown appserver:appserveradm /Library/Tomcat/blojsom_root/webapps/ROOT/WEB-INF/<Username>
    Thrid : look up in your /Library/Application Support/Weblogs/ your entries may have been modified as well ..
    run the following sudoed :
    su
    <password>
    cd /Library/Application Support/Weblogs
    ls -Cauil
    if you get root somewhere your entries will be unusable . hence you have again to change the owners .
    chown -R appserver:appserveradm /Library/Application\ Support/Weblogs/
    ls -Cauil shall now give you the following ...
    631548 drwxrwx--- 17 appserve appserve 578B Jun 18 04:21 ./
    631542 drwxrwx--- 10 appserve appserve 340B Jun 18 04:21 ../
    1626605 -rw-rw---- 1 bertrand appserve 6K Jun 18 03:54 .DS_Store
    1626760 drwxr-xr-x 12 appserve appserve 408B Jun 18 04:14 <USERS>/
    631613 -rw-rw---- 1 appserve appserve 363B Jun 18 04:00 blojsom.properties
    631549 drwxrwx--- 12 appserve appserve 408B Jun 18 04:00 bootstrap/
    631594 drwxrwx--- 4 appserve appserve 136B Jun 18 02:06 classes/
    631597 drwxrwx--- 13 appserve appserve 442B Jun 18 04:02 default/
    631615 -rw-rw---- 1 appserve appserve 228B Jun 18 04:00 dispatcher.properties
    631575 drwxrwx--- 20 appserve appserve 680B Jun 18 04:00 lib/
    1626559 -rw-rw---- 1 root appserve 116B Jun 18 04:00 plugin-admin-edit-users.properties
    631617 -rw-rw---- 1 appserve appserve 270B Jun 18 04:00 plugin-admin-upload.properties
    631618 -rw-rw---- 1 appserve appserve 2K Jun 18 04:00 plugin.properties
    631560 drwxrwx--- 16 appserve appserve 544B Jun 18 02:06 templates/
    631611 -rw-rw---- 1 appserve appserve 1K Jun 18 04:00 velocity.properties
    631612 -rw-rw---- 1 appserve appserve 5K Jun 18 04:00 web.xml
    631614 -rw-rw---- 1 appserve appserve 185B Jun 18 01:14 xmlrpc.properties
    Fourth restart the application server service and web service ..
    Enjoy the fix .
    Mac os X server 10.4.6   Mac OS X (10.4.6)  

  • How to use GarageBand at school and avoid getting 'File Not Found'

    Last year we used Audacity and this year we used GarageBand to create podcasts.
    We had students keeping their GarageBand project files on their USB sticks so that they could also work at home but many of them lost their work because they would get the message 'File Not Found'. The only work around we could come up with was to assign each student a computer and force them to only work on that computer and save their work in the GarageBand folder.
    Why is it not possible to use GarageBand projects across multiple computers by transferring with a USB? I even had them do drag and drop from the GarageBand folder to their USB instead of doing Save As but neither worked without errors.
    Sadly, many of these 160 students now have a negative opinion of Apple products and Apple software. I still like GarageBand, but it doesn't seem like a very good option for educational uses unless there is some sort of workaround that will allow my students to work on their projects on multiple computers.

    the only immediate thought is that you didn't format the USB drives for Mac OS. GB files require it, they won't work under other formats

  • Portal is down and HTTP 404 - File not found

    Hi All,
    our Portal dispatcher is running and server is not connected. shows the following error...
    HTTP 404 - File not found
    http://server: 50000/index.html - im able to get
    http://server: 50000/irj/portal - getting...
    HTTP 404 - File not found
    Please let us know urgently what went wrong..
    Thanks
    Pradeep

    Hello Pradeep,
    Please check the below mentioned link :
    http://help.sap.com/saphelp_nw70/helpdata/en/43/54cdc48d395f6ce10000000a1553f6/content.htm
    You can check the logs of the server for details.dev_bootstrap,dev_jcontrol,dev_serverX,std_server.out files can give you the details of what is wrong with the service.
    Also make sure that you are typing the correct url.
    http://<hostname>:5<instance no.>00/irj/portal.
    Regards,
    Sandeep.
    Edited by: Sandeep Sehgal on Mar 25, 2008 7:38 PM

  • Z68A-GD55 (G3) bios file not found on usb

    I've tried updating the bios to p8 and the pc got stuck in a boot loop.
    Thinking the mobo was dead and buried I deleted all the bios files from the usb. After many cmos resets tghe computer has come back to life and is now asking for me to insert the usb stick. 
    My question is, can anyone please help with the missing files.
    Also, I'm running a 2500k i5, I know now that I should not have done the update...

    Hi,
    Thanks for the quick reply. I maged to solve the problem, but here is more detail incase it helps others in a similar situation.
    What happened is, I tried to update the bios in windows and the software did it's thing until it came to restarting before completing the bios update. At that point the PC was stuck in a constant boot loop with nothing showing on the monitor.
    I tried removing battery, the ram etc and after a about 20 tried over 2 days, it suddenly showed up with a red screen asking for the usb stick to complete the ME 8 (?) update.
    To get the missing files back, I redownloaded the bios from msi website, and opened the exe file using winrar. There was a complaint of corrupt archive but I was able to extract out all the files onto a usb stick.
    This didn't fix the problem, then I renamed the BIN file to E7681IMS.P80 and it worked...the bios update finished.

  • Local Files and New Local Files not working

    I have been trying to fix this issue for the past 7 hours and im completely at a loss for words how many people have found the same problem and there is no straight forward answer as to why it either occured and no straight forward solution to the problem i would love some help from someone even though ive sifted through the community for an answer and found nothing.  The problem is simple my Local Files are not playing. They dont play in the local file tab and any of the new songs i downloaded to my computer library dont play.  The old songs i already had downloaded work fine in the playlists but the new one dont work.  I run windows 8.1 64 bit
    All my software is up to date. This problem started today Help.

    Do you seriously think we can answer that with zero information from you?
    Please give us:
    Operating System/version
    Photoshop version number
    Amount of RAM installed
    Hard drive(s) free capacity
    Video card make and model
    Camera make and model
    Then describe what you have done so far and the symptoms you are seeing.

  • When I type something search I get this jar:file:///C:/Program%20Files/Mozilla%20Firefox/omni.jar!/chrome/en-US/locale/browser-region/region.propertiesdogs, and it says file not found.

    Dogs was the keyword for my search. As you can see it is at the of this strange url. But no matter what the word, it gives me something like this.

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • HELP: Assembly Initialization Error: File not found. Something weird about the used reference

    I moved one project from solution A to solution B using TFS move (with uncommitted changes). I got compile time errors since the references were not found. There were 2 references used. I removed and added them again and compile time errors were fixed. I
    ran a test case and I get file not found exception.
    As per the reference properties, the Path of used reference is C:_src\HIP\Out\Debug\CIP\Bin\amd64\DataPipe\MaterializedEntityManagerTest\Caradigm.Platform.Pipeline.MaterializedEntityManager.dll
    As per the error below, I think it is looking for this, file:///C:/_src/HIP/Out/Debug/CIP/Test/amd64/DataPipe/MaterializedEntityManager
    Note that it is looking for it in the folder structure -  CIP\Test instead of
    CIP\Bin. This file does not exist in the Test folder. ANyways I decided to copy to the test folder and give it a shot, the folder being... 
    C:_src\HIP\Out\Debug\CIP\test\amd64\DataPipe\MaterializedEntityManagerTest\Caradigm.Platform.Pipeline.MaterializedEntityManager.dll. Unexpectedly, I still get the same error.
    I'm now going crazy with this error. What am i missing???
    Test Name: CdcEnableWithNoTableTest
    Test FullName: Caradigm.Platform.Pipeline.MaterializedEntityManager.Test.DefiningQueryParserTests.CdcEnableWithNoTableTest
    Test Source: c:\_src\HIP\prod\test\DataPipeline\MaterializationTest\EntityViewManagerTest\DefiningQueryParserTests.cs : line 15
    Test Outcome: Failed
    Test Duration: 0:00:00
    Result Message:
    Assembly Initialization method Caradigm.Platform.Pipeline.MaterializedEntityManager.Test.UnitTestInitializer.AssemblyInitialize threw exception. System.IO.FileNotFoundException: System.IO.FileNotFoundException: Could not load file or assembly 'Caradigm.Platform.Pipeline.MaterializedEntityManager, Version=3.0.0.0, Culture=neutral, PublicKeyToken=a03c60abe3a7c396' or one of its dependencies. The system cannot find the file specified.=== Pre-bind state information ===
    LOG: DisplayName = Caradigm.Platform.Pipeline.MaterializedEntityManager, Version=3.0.0.0, Culture=neutral, PublicKeyToken=a03c60abe3a7c396
    (Fully-specified)
    LOG: Appbase = file:///C:/_src/HIP/Out/Debug/CIP/Test/amd64/DataPipe/MaterializedEntityManager
    LOG: Initial PrivatePath = NULL
    Calling assembly : Caradigm.Platform.Pipeline.MaterializedEntityManager.Test, Version=3.0.0.0, Culture=neutral, PublicKeyToken=a03c60abe3a7c396.
    ===
    LOG: This bind starts in default load context.
    LOG: Using application configuration file: C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 12.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\vstest.executionengine.x86.exe.Config
    LOG: Using host configuration file:
    LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
    LOG: Post-policy reference: Caradigm.Platform.Pipeline.MaterializedEntityManager, Version=3.0.0.0, Culture=neutral, PublicKeyToken=a03c60abe3a7c396
    LOG: Attempting download of new URL file:///C:/_src/HIP/Out/Debug/CIP/Test/amd64/DataPipe/MaterializedEntityManager/Caradigm.Platform.Pipeline.MaterializedEntityManager.DLL.
    LOG: Attempting download of new URL file:///C:/_src/HIP/Out/Debug/CIP/Test/amd64/DataPipe/MaterializedEntityManager/Caradigm.Platform.Pipeline.MaterializedEntityManager/Caradigm.Platform.Pipeline.MaterializedEntityManager.DLL.
    LOG: Attempting download of new URL file:///C:/_src/HIP/Out/Debug/CIP/Test/amd64/DataPipe/MaterializedEntityManager/Caradigm.Platform.Pipeline.MaterializedEntityManager.EXE.
    LOG: Attempting download of new URL file:///C:/_src/HIP/Out/Debug/CIP/Test/amd64/DataPipe/MaterializedEntityManager/Caradigm.Platform.Pipeline.MaterializedEntityManager/Caradigm.Platform.Pipeline.MaterializedEntityManager.EXE.
    . Aborting test execution.
    Result StackTrace: at Caradigm.Platform.Pipeline.MaterializedEntityManager.Test.UnitTestInitializer.AssemblyInitialize(TestContext context)

    Hi,
    Maybe TFS forum is the correct forum for your question, but I'm not sure. I move your question to [where is the forum for...] where the moderators may direct you to the right place.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Garage Band Recording "File Not Found"

    I'm recording in Garage Band and after recording, after i save, when i try to reopen the program says.  This file is in 8 bit format.  This size is not supported and cannot be played back.  Anything i can do

    APPLE...I have the same problem.  It's not a permission issue.  ALL of my personal audio recordings and only some of the underlying music are empty (ie "missing") and it shows "File Not Found."  Please see the image below... 
    Could you please give a solution to this problem? I use this recording for work and need to edit it for a new client asap.

  • Launch Wine programs from menu: FIle not Found

    I have installed eMule with wine, and get the "File not found" message when running it from the menu.
    This was discussed in THIS thread, but none of the possible solutions work for me
    Original:
    env WINEPREFIX="/home/daerunarch/.wine" wine C:\\windows\\command\\start.exe /Unix /home/daerunarch/.wine/dosdevices/c:/users/Public/Start\ Menu/Programs/eMule/eMule.lnk
    Doesn't work
    Edited the menu entry with alacarte:
    wine 'C:\Program Files\eMule\emule.exe'
    doesn't work
    wine '.wine/drive_c/Program Files/eMule/emule.exe'
    doesnt' work
    wine "/home/username/.wine/drive_c/Program Files/eMule/emule.exe"
    doesn't work
    wine "/home/username/.local/share/applications/wine/Programs/eMule/eMule.desktop"
    dosen't work
    Also all the previous begining with "env WINEPREFIX=" instead of "wine". Nothing worked o_0 What should I try now?
    Last edited by Daerun (2011-02-13 23:36:46)

    Null, the problem is not running from gnome menu. I can make it run from console, and it shows these messages, just in case there's some hint here:
    wine '.wine/drive_c/Program Files/eMule/emule.exe'
    wine: cannot find L"C:\\windows\\system32\\winemenubuilder.exe"
    err:wineboot:ProcessRunKeys Error running cmd L"C:\\windows\\system32\\winemenubuilder.exe -a -r" (2)
    fixme:heap:HeapSetInformation (nil) 1 (nil) 0
    fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),4,3,(nil),0,(nil)) - stub!
    err:ole:CoGetClassObject class {5c63c1ad-3956-4ff8-8486-40034758315b} not registered
    err:ole:CoGetClassObject class {5c63c1ad-3956-4ff8-8486-40034758315b} not registered
    err:ole:create_server class {5c63c1ad-3956-4ff8-8486-40034758315b} not registered
    fixme:ole:CoGetClassObject CLSCTX_REMOTE_SERVER not supported
    err:ole:CoGetClassObject no class object {5c63c1ad-3956-4ff8-8486-40034758315b} could be created for context 0x17
    err:winediag:WSASocketW Failed to create a socket of type SOCK_RAW, this requires special permissions.
    err:winediag:IcmpCreateFile Failed to use ICMP (network ping), this requires special permissions.
    err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033c914
    fixme:richedit:ME_HandleMessage EM_GETLANGOPTIONS: stub
    fixme:richedit:ME_HandleMessage EM_SETLANGOPTIONS: stub
    fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
    fixme:richedit:ME_HandleMessage EM_GETLANGOPTIONS: stub
    fixme:richedit:ME_HandleMessage EM_SETLANGOPTIONS: stub
    fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
    fixme:richedit:ME_HandleMessage EM_GETLANGOPTIONS: stub
    fixme:richedit:ME_HandleMessage EM_SETLANGOPTIONS: stub
    fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
    fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
    fixme:shell:IAutoComplete2_fnInit ACO_FILTERPREFIXES not supported
    err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca34
    err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca38
    err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca4c
    err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca1c
    err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca1c
    err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca1c
    err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca1c
    err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca1c
    err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca48
    err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca48
    fixme:shell:IAutoComplete2_fnInit ACO_FILTERPREFIXES not supported
    err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033c9e8
    err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033c9e8
    fixme:richedit:ME_HandleMessage EM_GETLANGOPTIONS: stub
    fixme:richedit:ME_HandleMessage EM_SETLANGOPTIONS: stub
    fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
    Karol, that command didn't do anything for me...
    Turvyc, I know about aMule and have used it, but stuck to eMule because of some features it didn't have. If I can't run eMule I might as well return to aMule, as I know how to migrate configurations.

  • Performance Point Dashboard - Show Details - Export to Excel - 404 FILE NOT FOUND

    We are receiving an error when we want to drill down to the details of a report. We see the details but when we try to Export to Excel we get a file not found error.
    Both the aspx files are there in the 15/_Layouts folder.
    http://MySharepointServer/sites/PerformancePoint/_layouts/15/PPSWebParts/DrillThrough.aspx works. I see the details here and export to excel option
    When I click export to Excel I get to below page and get the file not found error
    http://MySharepointServer/_layouts/15/PPSWebParts/DrillThroughOfficeExport.aspx
    See Attached Screenshots using the link below
    https://www.evernote.com/shard/s433/sh/a6b7e4f7-babb-457b-addd-4c4fc7f57cc9/a6681814ad2ff11d21a45fd3f2bd8b08
    Thanks in advance.
    Sunhil

    Hi! Rebecca,
    Thanks for helping out. Please see the error details
    System.IO.FileNotFoundException: The system cannot find the file specified. (Exception from HRESULT: 0x80070002), StackTrace:
        at Microsoft.SharePoint.Utilities.SPUtilityInternal.Send404(HttpContext context) 
        at Microsoft.SharePoint.WebControls.UnsecuredLayoutsPageBase.OnPreInit(EventArgs e) 
        at Microsoft.SharePoint.WebControls.LayoutsPageBase.OnPreInit(EventArgs e) 
        at Microsoft.PerformancePoint.Scorecards.WebControls.DrillThrough15.OnPreInit(EventArgs e) 
        at System.Web.UI.Page.PerformPreInit() 
    Exception trying get context compatibility level: System.IO.FileNotFoundException: The site http://MySharepointServer:80/_layouts/15/PPSWebParts/DrillThroughOfficeExport.aspx could not be found in the Web application SPWebApplication Name=SharePoint - 80. 
        at Microsoft.SharePoint.SPSite.LookupSiteInfo(SPFarm farm, Boolean contextSite, Boolean swapSchemeForPathBasedSites, Uri& requestUri, Boolean& lookupRequiredContext, Guid& applicationId, Guid& contentDatabaseId, Guid& siteId,
    Guid& siteSubscriptionId, SPUrlZone& zone, String& serverRelativeUrl, Boolean& hostHeaderIsSiteName, Boolean& appWebRequest, String& appHostHeaderRedirectDomain, String& appSiteDomainPrefix, String& subscriptionName, String&
    appSiteDomainId, Uri& primaryUri) 
        at Microsoft.SharePoint.ApplicationRuntim...
    Thanks,
    Sunhil
    Sunhil

Maybe you are looking for