Qosmio X770-10G: integrated Microphoe isn't detected using viso cam

Hell,
I just tried to use skype and use the integated camera and microphoen that are genuine parts of the X770 10 G.
The camera is OK but the microphoen is not detected at all.
I dont see it in windows harware panel and it is not shown on Nvidia drivers.
Please can you help me how to activate it ormay be its a hardware problem needing toshiba repair under warranty ? In this cas, is their any pick up at home service jst like Sony or Did it (my previous was a Vaio but this Qosmio is reallu fantastic !)
Best rgards, Jean-Louis (EUROPE - FRANCE)

> The camera is OK but the microphoen is not detected at all.
You should go to the Skype audio settings and should check the microphone option.
Be sure that internal mic has been chosen there
Furthermore you can go to control panel -> sound -> recording tab
Here you should choose internal mic as default device.

Similar Messages

  • Final cut express isn't detecting my DV camera?

    Final cut express isn't detecting my DV camera?

    Hi Marc,
    More specifically, you need to use one of the following FCE easy setups:
    DV-NTSC
    DV-PAL
    Which one depends on where you are located & what kind of miniDV camcorder you are using.  If in North America you probably have a DV-NTSC camcorder.  If in Europe it's probably a DV-PAL camcorder.
    One other thing to watch out for is what audio setting you have in your camcorder.  Most miniDV camcorders come set to a factory default of 12-bit (32KHz) audio.  This is NOT the preferred setting for most video editing.  The preferred setting is 16-bit (48Khz) audio.
    If you filmed your video using 12-bit audio then the proper easy setups in FCE are:
    DV-NTSC 32KHz
    DV-PAL 32KHz

  • Web-based video capture and detection using web cam

    to anyone:
    is it possible to capture video and detect motion using a web cam in a web based application?how is it done?
    if not possible, what solutions can you suggest so that i can put it on a web based application?
    tnx for the help..

    Ironman wrote:
    I'm sure it could be achieved by capturing individual frames, say one every second or so, and then doing a checksum on the image bytes and compare it with the previous frames checksum - if they were different then the frames are different and therefore motion can be assumed. If you don't want to check the entire image you can choose a tile, say in the centre of the picture, and checksum this. I use this technique to detect frozen images if CCTV cameras are causing problems. This other thread may also help :
    http://forum.java.sun.com/thread.jspa?threadID=5233760
    Wow, now that is good idea. I guess you don't need external hardware to check for movement. Brilliant!

  • Qosmio X770 - cant choose Built-In 3D-Emitter

    Hey guys i just recently bought the Qosmio X770 with integrated NVIDIA 3d Vision, but when i want to enable 3D i cant choose Built-In 3d-Emitter because it doesnt show up only for the other 3D Kits.
    I upgraded from Home Premium to Ultimate by the way.
    Any Help?

    The model is X770-11C, and it does have an internal emitter. As you said it is on the right side of the webcam. After all 3D was working about a year ago when I got the PC.
    Unfortunately the manuals from NVidia don't give very much help either.
    This is what I try to do:
    - activate 3D Vision
    - I get 4 choices
    USB-infrared emitter and glasses
    wired glasses
    Pro-hub and glasses
    Discover glasses
    I'm not sure which one is the right one for my glasses, the type is P854. Looks like pro-hub according to the picture.
    After choosing them the next screen says that I should plugin the emitter into the usb hub. That's where I have to stop installation.

  • Qosmio X770 starts up with no display.

    My Qosmio X770 starts up normally but with no display, I tried connecting it to an external monitor but still nothing.
    Sometimes I turn on the computer and the display goes on normally, I restart and it's gone again for another long period of no display. it's kind of random.. I opened it up and I didnt notice anything wrong, I cleaned it up and put it back together, turned it on and it worked.. then a few days later it blacked out again. This has been going on since the first week I bought the laptop a year and a half ago.. I never had the time to take it to the repair shop, as im always on the move, and now the warranty has expired and im looking for an easy fix up, if possible?
    When I opened it up I noticed the case was kind of crumbling.. the plastic easily breaks. so I'm wondering if anyone else has these problems.. lousy plastic body and a faulty display.
    Any help, suggestions are appreciated.

    Intermittent problems are typically the hardest to diagnose. But let me try. Usually you can get an external monitor to show a display by doing an FN-F5 key combination. Hopefully you tried that. A black screen on the LCD can mean a bad LCD screen, bad FL inverter or a loose or bad cable. But if the external monitor doesn't work either then it goes down to the system board being at fault. With everything now being integrated into the system board including the video card, if the video isn't working internally or externally, the only fix is to replace the system board.

  • Qosmio x770/00x - button 1 does not work pressing 6 and other button

    This is going to sound so weird, but bear with me...
    I just got a Qosmio x770/00x a couple of weeks ago, mostly for gaming purposes.
    I play in left-handed configuration, using the Num pad as directional keys, with some of the other non-directional numbers mapped to things like 'jump' and 'melee', etc.
    I have the '1/End' key mapped usually to the 'Crouch' motion in games, and noticed that if I press the '6/Right' key, in combination with any other number key, the '1/End' key won't register!
    This means if I'm moving Forwards in a game, and Strafe to the right, I can't simultaneously crouch.
    I've done a bit of playing around, and it seems that this bug isn't limited to my unit, or to any particular program. If you try a similar thing in any other program (eg Notepad), and hold the '6' key down along with any other number key, the '1' key won't register.
    However it seems that it *has* to be the '6' key in the combination (eg. if you press '4' and '7' together, and then press '1', the '1' will still register.
    Have also tried this on the store demo model at the local computer place, and it seems that it's a problem with this particular model.
    The store computer runs Windows 7 Home Premium.
    I'm running Win7 Pro. BIOS and Windows are fully updated.
    Have also tried it on my older P-series Satellite, and that doesn't have the same problem.
    Any ideas?

    Hi
    >I've done a bit of playing around, and it seems that this bug isn't limited to my unit, or to any particular program. If you try a similar thing in any other program (eg Notepad), and hold the '6' key down along with any other number key, the '1' key won't register.
    >However it seems that it has to be the '6' key in the combination (eg. if you press '4' and '7' together, and then press '1', the '1' will still register.
    Ive got 2 notebooks from two different manufactures and the button 1 does not register if 6 + other button is pressed.
    Dont think its a really a keyboard bug because this happen with my two notebooks which are not really similar to each other

  • Qosmio X770: 4 nVidia HD audio devices in device manager

    So i have a few questions...
    In my device manager i have [this (screenshot)|http://i.imgur.com/NfH5E7p.jpg].
    So i have (!) 4 nvidia hd audio and 1 hd realtek audio.
    I usually update my nvidia video driver and nvidia hd audio driver is updated every time with it.
    But not long ago i decided to find any other updates to my drivers, cause bloody toshiba (we call it that way in Russia) is too lazy to support their laptops. And [found this:(realtek hd R2.70 codec driver )|http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level= 4&Conn=3&DownTypeID=3&GetDown=false].
    Installed it, everything is working fine so far. It is for realtek alc269 (and also many other devices, but for us only alc269 matters) which is the real name of realtek hd audio device in x770 laptops (i checked in program aida64, previously known as everest).
    So now i have [this (screenshot)|http://i.imgur.com/6HM5mLj.jpg]: version 6.0.1.6662 date 19.06.2012
    The previous version that lazy toshiba was glad to provide us with - 6.0.1.6360 [(screenshot)|http://i.imgur.com/dUQiPA0.jpg]
    So the questions are:
    1. Why i have FOUR nvidia hd audio devices in device manager?
    2. How can i make nvidia hd audio my primary audio device? Or maybe they are some kind of virtual devices or smth like that.
    3. Do you think the idea of installing driver directly from realtek website was bad? There is a disclaimer on their site: To be sure you obtain the full features/customizations provided in your original audio product, please download the latest drivers from your system/motherboard manufacturer's website.
    So i invite everyone to test this audio driver with me :)
    And a few more things.
    In one topic i found this info: moreover, myself and other users of this forum have overclocked their cards from 657/1300/1200 to 800/900/1600 and are very pleased with the results, so try not to overexaggerate
    (it is a quote). So I will be happy if someone gives me link to some kind of manual about overclocking 560m gt from our beloved x770.
    Also I found a lot of topics about nvidia drivers with angry customers. I don't remember when i first updated video drivers, but i've never had problems with them. When the situation changed? As far as i can understand in 2011 you could't install nvidia drivers directly from nvidia website.
    P.S. sorry for my english, i'm from Russia. Also there is some russian on screenshots, hope it won't make your eyes bleed.

    At first i want to "thank" moderator about renaming my topic. Original name was: realtek vs nvidia hd audio x770 + update r2.70 question. Where is 2.70 part in the current name? Ok.
    Second. To Tonny: I'm not lame user, no need to explain me obvious things).
    > {quote:title=Tonny wrote:}{quote}
    > > How can i make nvidia hd audio my primary audio device?
    > I dont understand why you want to make an device primary?
    > What is the purpose for that?
    >
    > If you want you can set the sound devices as default device in Control Panel -> Sound -> Playback tab
    > Click on the device and choose default.
    If there is nvidia hd audio device and it's not some kind of virtual device or controller, i want to test it like primary audio device. Simple curiosity. I love flac etc.,
    So I always try to improve sound. And alc269 we have in x770 is also installed in my ANCIENT asus eee pc, so it's very depressing. Also your advice about control panel - sound is not working, i think you know why... There's only speaker device working on realtek hd audio.
    > {quote:title=Tonny wrote:}{quote}
    > You can use the driver from Realtek since the sound chip is from Realtek.
    Yep, of course, but it's my 5th laptop and also i have 2 netbooks (i'm speaking only about portative devices, not pc). I tried to update drivers manually numerous times on my previous devices, and I learned a lesson, that if you install new driver (not from you laptop/whatever support page, but directly from device manufacter's website ) and even if you are absolutely sure that driver is compatible with you device there can be problems. For example, as i've already said realtek alc269 is installed in my qosmio x770 and in my super old asus eee pc. And driver is the same.
    Also realtek driver support page has disclaimer: To be sure you obtain the full features/customizations provided in your original audio product, please download the latest drivers from your system/motherboard manufacturer's website. (already was in op-post).
    So I only tried to hear from those who has already installed r2.70 realtek update or maybe tested it some way. But the moderator made it impossible renaming the topic.

  • Qosmio F50-10G - Windows Vista 64-bit and drivers

    I've been using Qosmio F50-10g for bout 20 days now.
    It has 32 bit operating system on and i think there is no 64 bit driver support yet.
    If i am not wrong x305 series have 64 bit driver support and the configuration of two laptops are similar.
    I was hoping to create a 64 bit back-up Dvd but it does not exist on 64 bit if i am not wrong on my pc.
    So any suggestions regarding how to use 64 bit drivers on these computers ?
    Or do i just have to wait for Toshiba to publish the 64 bit drivers?
    Thx.

    Hi
    It seems that at this time only the BIOS and the BT stack was released for the Vista 64bit OS.
    But Im sure the other Vista 64bit drivers will be released in the next time.
    So I would recommend waiting till the 64bit drivers are online!!!
    Regards

  • Adobe Acrobat 9 Pro - Form Wizard isn't detecting form fields?

    Hi there,
    I've been scouring various forums, blogs, etc. to find an answer to my problem, and have yet to be successful.  Here it is:
    I've created a form in Illustrator CS5 using the rectangle shape tool to indicate form fields.  I need users to be able to enter information in each of the specified fields.  I've saved the file as a .PDF and have opened it into Adobe Acrobat Pro 9.  I then select "Start Form Wizard" from the Forms menu, and after making the appropriate selections it tells me: "No new form field annotations were detected." and then prompts me to the form editing page.  I've also tried simply selecting "Add or Edit Fields" from the Forms menu and the same thing happens - it isn't detecting any form fields.
    The only time the Form Wizard or Add or Edit Fields options work is if I use underlines instead of boxes as the form fields, but I'd really prefer to use the boxes since they lend themselves to the aesthetics of the document much better. 
    I'm new to converting Illustrator files into interactive .PDFs, so I'm not sure what I should be doing.  The background color of the document is grey and the boxes are white with no outline (I tried it with an outline around the boxes and it still didn't work).  Any advice would be much appreciated!  Thanks.
    Beth

    Hi Beth
    How big are  these fields? Are they for entering text or just check boxes?
    I have found that sometimes FormWizard is not compatible with some Quark files.
    Sounds like it might be easier for you to do the fields manually.
    First draw the field like you want it and set that as the default then you can choose to paste multiple fields.
    Also if you want to use a line for FormWizard you can make the background of the field white and cover the line with it.
    Ron

  • Re: Qosmio X770-105 - camera is not working with Skype

    Hey,
    I've just got Qosmio x770-105 and while setting up Skype the camera just stayed black and never showed any image. While using the Toshiba Web Camera Application it is working on Skype it just has stays black.
    Do you have any suggestions on how to fix that ?
    Thanks Than

    Well, you could try to remove the Toshiba Webcam Application from the system and could try to use just the Skype tool but this is just a suggestion not quite sure what cause this issue
    It looks really like broken Skype utility have googled around and it looks like more Skype users have the same problem using different computers and different webcamsunfortunately did not find a exact solution proposal

  • Qosmio X770 display not recognized anymore

    I just bought a Qosmio x770 about a month ago and some day when I started it the login screen never appeared.
    In linux left me in command prompt and said that no screen configuration was found.
    Windows said nothing but the screen remained black.
    After a number of reboots it worked normally but only for a couple of hours.
    Plugged to an external monitor it works.
    Also when I boot in safemode (or failsafe) it works (I mean I can enter windows/linux at 640x480 resolution).
    I updated the bios to the latest version 1.30. What more else to try?
    It's really uncomfortable to send it back because I need it for my job (even connected to another monitor).
    My hope is that the problem is not hardware related and somehow I can solve it.
    Is there a chance?
    Thank you!

    I reinstalled the windows driver in safe mode ... and nothing.. But I didn't do anything before the problem appeared ... And linux is not recognizing the screen also. I tried to boot from an external hdd and the same problem. Fn F5 show me only the external monitor. I tried some 3d games on the external monitor and everything seem ok. When connected to hdmi linux boots up in X Windows but when running nvidia-settings there is no internal display ... only the external one.
    The strange thing is that the internal display is working in safe mode ... is it possible to be damaged then?
    Thank you

  • Qosmio X770-n404 How to get illumination to stick ON in Bios?

    Just received a brand new Qosmio X770-n404 from toshiba last week
    The lighted keyboard words fine when turn on
    However when turned off, and illumination set in BIOS to on, it wont stay on after windows starts
    I go back to Bios and it says illumination off
    How can i get illumination to stick ON off in bios?
    (im talking the illumintion option, not keyboard back light)

    ok thats what i thought its supposed to do
    so let me restate clearly, what my problem is:
    first i go to bios, i sent illumination to ON
    then of course i hit the SAVE option to store the settings
    i exit and the laptop reboots
    now, as soon as the laptop starts, the media buttons and the red strip above the mouse pad are illuminated
    the laptop continues to boot, after i enter my password and the windows desktop begins to open, the lights cut off
    The only way i can cut them back on at this point is to hit Fn-Z to either turn them ON, or turn them on with the timer(which is not exactly the same as JUST having the illumination on)
    i reboot back into bios, the illimunation option is turned OFF
    i turn it back on
    wash - rinse - repeat.....
    So im wondering if i have a software or hardware problem. When i set the illumination to ON , shouldnt it STAY on? and not go off once i enter windows?

  • External speakers do not turn off Qosmio x770 speakers

    When I plug external speakers on my Qosmio x770-135 the internal speakers don't turn off.
    Can someonee help me?

    You may check the Realtek HD Audio Manager in the Control Panel.
    In the top right corner, there's a little yellow folder called "Connector Settings.
    There, you could enable the setting "Enable pop-up dialog, when device is plugged in".
    Now when you plug in an external speaker or headphones, it pops up and I select the option "headphone" (instead of "line-in"), and then the sound comes out only through the headphones/ext.speaker.

  • Qosmio x770 nvidia and battery software

    Hello.
    I've got a qosmio x770 model PSBY5U (Windows7, 64bits) and suddenly I've noticed that my nvidia hardware (GTX560M) was not listed in the device manager lists. Before I've noticed, I've got some blue screens of death (most of them, after coming back from "sleeping" mode).
    First thing I thought about, the driver. Looked for the most updated driver and it couldnt find any hardware to work with. So I restored the whole system and installed the original drvier. So far it was all good and back to normal but after I installed all my software back and after several rebooting, the nvidia was gone again and after sleeping the machine and starting it again, another blue screen.
    I decided on restoring the qosmio to its total factory state, did everything all over again (drivers and stuff), worked just fine and after several normal shut downs it dissapeared again, and so on. 
    Any idea of what is going on? Also, starting from these, I've noticed that the "eco utility" doesn't work anymore. When active,  my battery drains very fast (it's not the battery). and these started to happen as soon as the nvidia problem started. While just the system restored, the eco utility works just fine, after the nvidida dissapears, it doesn't economized the battery. Any idea?
    Thank's a lot!
    PS. Excuse my bad english. Not an english speaker.

    If something you're installing is interfering, try using System Restore to restore a previous restore point from before this became an issue.
    Install software one at a time to determine which program is causing the problem.
    - Peter

  • Qosmio X770 Where to get Corel WinDVD?

    I got Qosmio X770. After having updated nvidia drivers, Corel WinDVE does not work anymore?
    How can I get it work again?

    Hi
    Try to install the patch from this page:
    Corel Digital Studio (Patch update) 1.5.10.355
    http://www.mytoshiba.com.au/support/computers/qosmio/x770/psby5a-02301x/download?os=25

Maybe you are looking for