Qosmio X770-11C - how to disable on board speakers when using Line Out?

Hi,
Is there any way to disable on board speakers when the line out is used.
Currently if I plug in a cable to the hadphone socket and choose lineout on the realtek control panel, the sound is output to the line out as expected but also through the internal speakers.
Is there any way to stop this, and only have sound going out through the line out?
thanks
Graeme

If you want to hear sound on headset only you must choose Headphone option.
Disconnect cable and connect it again. When you see small window on the screen where you can choose between headphone and line out options choose headphone and you will hear sound on external device only.
In case you have disabled this popup dialog you can activate it manually. Open Realtek manager connect external device and when you see activated black point on the right side make double click there and change settings.

Similar Messages

How to disable logon with token when session times out.

Please help!!!,
After I modified, save and close the web.config file and restart IIS, it continues to send me to the logon page after the session times out.
Is there other way that i can disable the logon after the session times out?
modified code:

<add key="logonTokenEnabled" value="false"/>
CRS version: Crystal Server XI R2 SP2
Viewer: .NET Infoview
Thank you,
Chico
Edited by: Walter Chiriboga on Aug 29, 2008 8:26 PM

I think if you enable some type of SSO (single sign-on) you could accomplish something like this, but with traditional logons this would be a security risk. You would need to allow your sessions to not time out. After a session times out with out some type of SSO involved it's impossible for our application to identify who the user is when they access an object. This is why you are reprompted for logon.
There may be a way to extend session life indefinitely but it wouldn't be recommended.
Regards,
Tim

How to disable auto shut down when doing line-in recordi

I am using Zen V Plus 6gb to do li've line-in mic recording.
I experience creation of a few tacks when the recording ends.
When I asked Creative Tech, they said it is auto shut down when the voice recorded falls below audible level. Can I disable this?

If I got you right, it interrupts the recording when a period of seconds no signal more loud than a certain level is
on the line-in source? Right? Normally you could aplify anything, even white noise, but I don't get the point.
Are there any songs that have longer interruptions than 5 seconds according to this cd norm?

Qosmio X770-11C - good or bad experience?

As a fan of Toshiba products (after my two Toshiba PC’s: protege M200, Satellite A200-1DS), I have decided to by a more performance one.
So I bought Toshiba Qosmio X770-11C, I was satisfied by the high performances, as I'm using matlab and 3dsmax.
Then after 7 months I have started to see blue screens;
I thought that may be with window 8 the problems will be resolved, unfortunately not….
Calling Toshiba, they have repaired it (when I received it, stating windows… blue screen again…
so I don’t know what they have repaired…..!!!)
Calling them again, for many times, at last after 3 months and half they send UPS to repair it… till now my PC is at toshiba to be repaired…
For me it is a good luck with toshiba: I bought my PC .. I used it for 7 months… then.. I’m in stand by… :(
I think this will be my last Toshiba PC…
Unfortunately I loved their products before, so I’m looking now for Lenovo, any one has an idea about the performances of such pc’s.?

Sorry to read all this. Qosmio series is best Toshiba multimedia machine but it was always too expensive for me so Im user of Satellite P series. Ai still use my Satellite P500 in hope Toshiba will offer again one big P series again. I love 18,4 display.
I dont know which BSOD have you noticed (error code) and what can be the reason. Have you tried to reinstall recovery image and test functionality with factory settings again?
I rally hope you will get your Qosmio soon and everything will be OK again.

How to disable the reminding dialog when close the webi report viewer

Dear all
How to disable the reminding dialog when close the webi report viewer
Background
When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
But customer need to disable this dialog, and can clost the report viewer directly.
So is there any ways to modify this?
I think it shoule modify some .js file under tomcat, but can not find the solution.
Thanks a lot, any information woulde be appreciated.
David Zhang

I've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
MANY thanks mende1 for the answer on how to fix it.

How to disable the security code and use only the Touch ID

how to disable the security code and use only the Touch ID

You can't use Touch ID without a passcode.
http://support.apple.com/kb/HT5883

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

How to delete the temporary files when we log out from ESS

Hello expert,
In my company we are running ESS using ITS server, do you know how to delete the temporary files when we log out from ESS?
Thanks.

The temporary files used by ESS. For example paystub pdf file.

How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one?

Based on http://forums.adobe.com/thread/1308132?tstart=0 I decided to add each question seperately:
Hello, I'm quite interested in buying Lightroom 5.2. I tried the RC which ran out now. Yet, I have a several questions that I can't really find good conclusive answers to, that I'd like to get answered before buying LR. Please don't write maybe like this or that (assumptions), since I don't want to start my whole workflow and then realize that I have to change everything around, so please answer, if you know for sure that something works and you are, preferably, using that method too.
This is the biggest question, where I mainly want a conclusive answer: How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one of them, using the same photos for editing. I won't use DNG. Details: I mainly use my older MacBook Pro, but would like to be able to use my PC as it's way better (Specs: i5 2500K, 16GB RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HDs that I could use, one for Backup and one for the actual Photos/Edits. I'll probably need to use it as my internal HDs are quite full, and I can't just delete stuff or move it to an (Developer programs, Lossless music, etc.).
Based on this, how do I back up the whole thing e.g. Photos folder (all photos and edits, and preferably presets too)?

I believe it should be possible to work cross-platform without having to relink files each time, or without having to keep exporting/importing the catalog, by keeping the single catalog and the image library on the one external drive which is then switched between systems as needed.
Obvious first requirement is an external drive that is formatted in such a way (e.g FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalog AND the images parent folder are both established at the same level in one overall parent folder, then it should be possible to take advatage of Lightroom's ability to use relative paths rather than absolute paths to detect the images, no matter if the drive is named (Mac) or lettered (PC). This is how "export as Catalog" works, i.e. it creates a "package", aka a parent folder, containing the catalog and a replica of the exported images folder hierarchy alongside the catalog. Take that "package" to another system (same OS or not) and "it just works" even if the drive letter is different or the OS is different....because the relative path from catalog to images is still the same.
I haven't tested this cross-platform (though I have between different PC systems with different drive letters) so for me it's still just a theory, but there may be others who have done this successfully.

How do I close a JInternalFrame when using subclasses and a separate cla...

The heading should be: How do I close a JInternalFrame when using subclasses and a separate class for the actionListener?
I have just created a JInternalFrame appclication and now I want to structure up my code. I have a Superclass that contains the usual settings for the two JInternalFrame:s, and the two subclasses with frame specific information. Both the JInternalFrames use the same OK button. I want to have the actionListener outside the classes to avoid repetition of code. But the dispose()-function does not work properly, it does not close the opened JInternalFrame. What�s wrong?
class Superclass extends JFrame
     JButton b= new JButton("ok");
     Superclass()
class Subclass1 extends Superclass
     Subclass1 ()
          add(ok);
       ok.addActionListener(new Listener());
class Subclass2 extends Superclass
     Subclass2 ()
          add(ok);
       ok.addActionListener(new Listener());
class Listener extends Superclass implements ActionListener
     public void actionPerformed(ActionEvent e)
               dispose();
}How do I controll in the Listener class that the button in Subclass1 is beeing pressed?

First of all I think I misunderstood your question. You said you had two internal frames, so I thought you wanted to close the internal frame.
It now looks to me like you want to close the entire JFrame, which makes the code even a little easier. Something like:
JComponent component = (JComponent)event.getSource();
JFrame frame = (JFrame)SwingUtilities.windowForComponent( component );
frame.dispose();
Ok, I will make a try:
public static Container getAncestorOfClass(Class c, Component comp)
w.getAncestorOfClass(w, this); Fiirst you need to learn the basics of reading the API.
"getAncestorOfClass()" is a static method. That means you don't use a variable to invoke the method. You use the class itself.
"w" is a variable, which is a JFrame, but that is not what the first parameter should be. The first parameter is a "Class".
"this" will refer to your Listener class, but you need the Component that generated the ActionEvent.
When I thought you wanted to close an internal frame then the code would have been something like:
JComponent component = (JComponent)event.getSource();
Container container = SwingUtilities.getAncesterOfClass( JInternalFrame.class, component );
JInternalFrame internalFrame = (JInternalFrame)container;
internalFrame.invokeSomeMethodHere();If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)", that demonstrates the incorrect behaviour.
http://homepage1.nifty.com/algafield/sscce.html

How do I stop system sounds when using AirPlay on my MacBook Pro?

Hi all,
Probably a quick question, but I'm fairly new to Macs. I've a Macbook Pro 13 Late 2011 and now I've got an Apple TV, I use AirPlay. But how do I stop system sounds when using AirPlay?
Many thanks in advance, Jon.

Open AirPort Utility located in HD > Applications > Utilities
From the AirPort Utility menu bar click AirPort Utility > Preferences
Deselect: Monitor AirPort base stations for problems

How can I customize the toolbar when using the attribute browser

In CVI 2012, the toolbar changes depending on the environment, e.g. it is different for the source window and the UI editor. The toolbar can be customized using the menu Options / Toolbar...
Unfortunately, when using the attribute browser of the UI editor, another toolbar is displayed, i.e. not the UI editor toolbar.... I would have assumed that the attribute browser belongs to the UI editor, obviously it doesn't... So how can I customize the toolbar when using the attribute browser?
Solved!
Go to Solution.

Luis,
It's nice to have you back
Thank you for the clarification, so I'll elaborate a bit more: In the regular workspace toolbar, I have a disk symbol to save the file. This symbol is gone in the attribute browser...
So I have three different toolbars, for source code (workspace), UI editor, and the UI editor displayed but the attribute browser clicked on (selected)...
Thanks
Wolfgang
Source code:
UI editor:
Attribute browser:

Iphone 5c. How do I silence speakers when using Ear Phones

How do O turn off speaker when using Ear Phones

I think it recognises *some* non-Apple Bluetooth devices, but the number of devices, and the functionality supported, is very limited, and extremely poor and inflexible when compared to other manufacturers' devices.

Qosmio X770-n404 How to get illumination to stick ON in Bios?

Just received a brand new Qosmio X770-n404 from toshiba last week
The lighted keyboard words fine when turn on
However when turned off, and illumination set in BIOS to on, it wont stay on after windows starts
I go back to Bios and it says illumination off
How can i get illumination to stick ON off in bios?
(im talking the illumintion option, not keyboard back light)

ok thats what i thought its supposed to do
so let me restate clearly, what my problem is:
first i go to bios, i sent illumination to ON
then of course i hit the SAVE option to store the settings
i exit and the laptop reboots
now, as soon as the laptop starts, the media buttons and the red strip above the mouse pad are illuminated
the laptop continues to boot, after i enter my password and the windows desktop begins to open, the lights cut off
The only way i can cut them back on at this point is to hit Fn-Z to either turn them ON, or turn them on with the timer(which is not exactly the same as JUST having the illumination on)
i reboot back into bios, the illimunation option is turned OFF
i turn it back on
wash - rinse - repeat.....
So im wondering if i have a software or hardware problem. When i set the illumination to ON , shouldnt it STAY on? and not go off once i enter windows?

How to disable on-board mic

I use a special headset designed for my ear. When I plug this 4 pole male jack into my droid, the on-board speakers are disabled, but the on-board mic is not disabled. The headset is wire properly, according to the droid pin-out.
How can I disable the on-board mic? There's gotta be a way!

This would probably be a better question for the Motorola forums versus Verizon.

Qosmio X770-11C - how to disable on board speakers when using Line Out?

Similar Messages

Maybe you are looking for