Qosmio X775 blue screen error Code 116 with OpenGL and video programs

After updating windows I found that I was getting blue screen messages when I tried to use OpenGL in Photoshop or when I open Adobe After Effects and other video programs.
The mini dump message is:
==================================================
Dump File         : 072512-32151-01.dmp
Crash Time        : 7/25/2012 8:46:34 PM
Bug Check String :
Bug Check Code    : 0x00000116
Parameter 1       : fffffa80`0b507010
Parameter 2       : fffff880`0f39f4d4
Parameter 3       : 00000000`00000000
Parameter 4       : 00000000`00000002
Caused By Driver : nvlddmkm.sys
Caused By Address : nvlddmkm.sys+19e4d4
File Description :
Product Name      :
Company           :
File Version      :
Processor         : x64
Crash Address     : ntoskrnl.exe+7f1c0
Stack Address 1   :
Stack Address 2   :
Stack Address 3   :
Computer Name     :
Full Path         : C:\windows\Minidump\072512-32151-01.dmp
Processors Count : 4
Major Version     : 15
Minor Version     : 7601
Dump File Size    : 370,384
==================================================
I've looked this up with no result. Can anyone help. (Note: I am fairly literate but not a computer geek.)
Sheilamacd
Sheilamacd

Hi there,
Sorry for bringing this thread back up but I have the exact same laptop and the exact same problem. I believe I've had this problem since this thread has been posted, but have just come across this thread. I've done a factory reset through the built in recovery options but I still come across these errors (BSODs and graphical glitches, also from nvlddmkm.sys and 0x116 errors). Whenever I run a Furmark GPU stress test, the FPS is fine until I hear the fan turn on, which the frames then drop extremely low (5 fps or so). Once temperature of the GPU drops a bit and the fans turn off, the FPS rises again back to normal. This continues for awhile (dropping and going back up) until it crashes with an OpenGL error. I also did a Memtest to check my RAM, but it all checked out ok. At first I ordered a recovery disc because the recovery partition was not working for some reason (kept crashing/freezing). I tried it again recently and the recovery went through. I'm not quite sure if the built in recovery and the recovery media discs are different, but I'm hoping it will make a difference when it gets here. If the recovery disc does however not work, should I just assume its a hardware issue and send it to an ASP for repair? Extremely hesitant because of the high cost...Any help would be much appreciated. Been bothered by this issue for a month...

Similar Messages

Blue screen error code. Please help.

late 2008 version.
Recently my school reinstalled windows 7 but after he did that, there was some blue screen error code which only appears while running on windows and everything is fine on the mac side.
He reinstalled windows 7 again but the blue screen error code started again. He said that it could be that my apple disc is not original which caused the error code, however last year they were able to installed windows 7 without any issue. He also said that it could be the hard drive problem.
Another problem I have is that while on windows the hard disk drives doesn't show the mac too.
Please help! Much appreciated if any of you can help me out.

Unless you run a VM such as Parallels, you're not going to be able to see your Mac disk using Boot Camp. If I were you, I'd see about getting Parallels Desktop and installing Windows 7 on it. You can then inter-operate with both systems.
Clinton

HELP ME PLEASE !! Blue screen error code 9c IBM T43 1872

Hello everybody,
I need your help please !!
I have an laptop T43 1872. When i installed windows xp pro sp2, after 10 minutes, my laptop show a blue screen "machine_check_exception" , code error : 0,00000009c.
After search in web, the solution is to update my bios. I do it but my problem is always here.
Have you one solution for me ?
Thanks you a lot of
Mimij

take a look at this http://www.errordecoder.com/stop-error-codes/STOP-0x0000009C.html
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Blu-Ray Error Code 0 with BD-RE CS4

I have been using a BD-RE as a test run disk and I have rewritten
to it about 4 times from Encore 4.
Blu-Ray Error " ",Code:"0"0, Note:"
I get the above error now when I try to burn to the BD-RE, but I can
burn BD-R with no trouble. I think the disk got corrupted in some way. I have been extra careful
when handling the disk because I wanted it to last alot longer than 4 burns. I have been checking the box for "Auto Erase Rewriteable disk". I did a quick erase with some software that came with my LG internal BD burner. The other software says that the disk is empty. I still get the error from encore, though.
Anybody know what's happening?

I've experienced Encore evaluation is quite approximative.
This is not a problem, if you know it.
An almost 22Gb file could reach the BD-R size limit (although it is 25) .
Usually, I stay bit down to this value.
Anyway I do not know what Err 0 means, 'cause an "extraload" should be displayed as "too big for media" or something like this.
This is what happens in my italian Encore when I exceed.
I've also experienced, times ago, that a BD-RE (Kraun, if I remember correctly) had a smaller size compared with a BD-R one.
With the same project, I was able to burn a BD-R and not the BD-RE.
Anyway, when you'll do the image, remember to check this is a BD-RE image and not a BD-R (bottom of the window).
Ciao
Giorgio

Blue Screen error message after using Rescue and Recovery.

Good morning - I unfortunately had to use the IBM Rescue and Recovery feature to restore my factory settings. However, now my computer is giving me a blue screen error during the startup process. Unfortunately it is not on the screen long enough for me to get too much information from it, but I have been able to get win22n51.sys as being some sort of error message. If I start the computer in safe mode it will load without the error. If I use the safe mode plus networking it gives the error. So I'm assuming it has something to do with the network drivers?
I would appreciate any ideas you all have for resolving/further diagnosing this problem.
Thank you!

Hello,
Perhaps this Lenovo knowledgebase article, "XP Crash: System may hang or restart with a previous version of the Intel PRO 2200BG Mini PCI adapte..." will be of help to you in resolving the problem?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Blue screen error code B88B514A

hi
i recently did an update and now the printer wont work
i get a blue screen that flashes really quickly then i think the error code is B88B514A
any help please ive only had it less than a month

Hello @hobi12,
Welcome to the HP Support Forums! I see you recently did an update to your HP Envy 120 and now the front panel is blue with an error code 'B88B514A'.
I would like you to start troubleshooting here: 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M...
'Because there are many variations of these 'Problem with Printhead,' 'Printer Failure,' or 'Ink System Failure' error messages and alphanumeric codes, we have provided a few guided steps to get you to the right troubleshooting document for your error. Select the statement that best describes your situation.'
I hope this helps, if you are still getting the error message, call our technical support at 800-474-6836 as it may be the printers hardware and you would still be covered by factory warranty. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Iphone 5s Blue screen error while sync with iTunes?

While try to sync iphone 5s with iTunes, immediately getting blue screen and phone restarted. Please help.

Forgot to add that I replaced it my self. After I replaced the back I tested the phone out before screwing the last 2 screw next to the lighting port. The phone worked then. But that was before i plugged in the Touch ID cable.

Blue screen error code 0x00000050 and 0x0000000a on T430 (234234U)

Hi,
I have a new T430 and it crashes with a bluescreen 0x00000050 and 0x0000000a, I have been having this issue intermittently.
I've already checked the memory and hard drives with the: linux-bootable-cd-16.iso, with no problems.
I tried to use the recovery tool to restome my system but I keep having the same errors.
I used the software "BlueScreenView" to read the .dmp file, it says that it caused by address "ntoskrnl.exe + 7f1c0".
any solution?, thanks

marcelop5,
Here is some additional info on ntoskrnl.exe + 7f1c0 from Microsoft, Server Forums and another Microsoft forum.
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Blue screen error 0x0000006B windows 7 64bit

I have blue screen error code 0x0000006B PROCESS1_INITIALIZATION_FAILED on my vaio laptop. I tried safe mode and safe mode with command prompt and still doesnt work either. Someone help fix this issue please

Hi,
Which phase did you come across this error?
Read this article to see if it's helpful to you:
"Stop error code 0x0000006B PROCESS1_INITIALIZATION_FAILED" error message during startup on a computer that is running Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/981833
If the issue persists, like ZigZag said, after upload the minidump file into OneDrive, then share the link here.
To share the file, prefer to this article:
Share files and folders and change permissions
http://windows.microsoft.com/en-in/onedrive/share-file-folder
Karen Hu
TechNet Community Support

Blue screen error after USB connection

hello, I have a new 8100. All is great, all is working, but the problem appeared after I installed the software and I connected the mobile to the computer by USB... the blue screen error of Windows Vista appeared and then
after the automatic reboot of my computer
it said the following mistakes:
"Firma con problemas:
Nombre del evento de problema: BlueScreen                        ( name of the problem )
Versión del sistema operativo: 6.0.6000.2.0.0.768.3             ( OS version )
Id. de configuración regional: 3082                                    ( regional configuration ID )
Información adicional del problema:                                    ( aditional info on the problem )
BCCode: 4e
BCP1: 0000009A
BCP2: 0003EA16
BCP3: 00000006
BCP4: 00000002
OS Version: 6_0_6000
Service Pack: 0_0
Product: 768_1
Archivos que ayudan a describir el problema:       ( files which help to describe the problem )
C:\Windows\Minidump\Mini010609-03.dmp
C:\Users\antonio\AppData\Local\Temp\WER-110323-0.sysdata.xml
C:\Users\antonio\AppData\Local\Temp\WER6C68.tmp.version.txt
Lea nuestra declaración de privacidad:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0c0a
I hadn't anything wrong with my Vista OS before
thanks in advance
Solved!
Go to Solution.

Hi and welcome to the forums!
I don't read Spanish very well, but did you leave the Blackberry plugged in when you
rebooted the PC? Vista might have tried to used the BB as a drive for error checking or system functions.
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Blue Screen Error when syncing ipod touch 4g 32gb with i tunes 10 on Vista

Hi
I'm trying to sync my ipod touch 4g with my itunes 10 using a Dell XPS with Windows Vista. After the point where the songs begin to copy (around 5 mins to 30 mins into copying) a blue screen error is caused and the computer shuts down automatically. The blue screen error ID is 2057.
I have scanned for viruses and its clean, tested my hardrive and its all ok, and now been to apple and got a replacement ipod and usb, re-installed i tunes 10 BUT its still happening.
i'm not sure what to do next ..any suggestions??
BTW my computer works fine until I try syncing the ipod so it's definitely something related to it.

Just in case anybody is interested I managed to resolve the problem. Not sure if it was a just a co-incidence but after windows had auto-removed itunes 10, I plugged in the ipod and the computer recognised it as a working piece of hardware, although it actually thought it was a camera (not sure if that's normal).
Anyway I re-installed itunes10 but kept the ipod plugged into the usb all the time. When itunes had installed, i began the sync and the files copied far more quickly than in previous attempts. They are all on now and the ipod is working fine and no blue screen errors.
What probably happened is that when windows auto-fixed errors after the last crash(it didn't run an auto-fix after previous crashes), it fixed the error which was crashing itunes10 when syncing. I hope nobody else has this problem and the ipod remains ok.

Windows 7 Blue Screen Errors (with Apple Time Capsule)

Can anyone tell me whether Apple has found a way to make the Apple Time Capsule work with Windows 7 without causing a blue screen error every time it is used? BTW, it works perfectly on Windows XP and Windows Vista.
Note: The Apple Time Capsule does not yet support Windows 7 (see specifications).

Can anyone tell me whether Apple has found a way to make the Apple Time Capsule work with Windows 7 without causing a blue screen error every time it is used? BTW, it works perfectly on Windows XP and Windows Vista.
Note: The Apple Time Capsule does not yet support Windows 7 (see specifications).

After adopting Firefox 19.0 as default browser, I experience numerous occurrences of Blue Screen errors with MS XP

Since I have installed Firefox 19.0 (first time installation and usage), my computer crashes several times a week: the Blue Screen Error comes up and I have to turn down my computer.
I've run all recommended system and disk checks. I also have Norton as anti-virus.
To my knowledge, Firefox is the only major modification I've made on my computer before the default started to occur.
It seems that other users have encountered similar problems with version 18 and reverting to version 17 (which I cannot do) seems to have solved their issues.
Occurences of Blue screen: when using Firefox, or while screen saver on, or etc.
Have you got reported issues of compatibility between Firefox 19 and MS XP when IE was the former internet browser?
What steps do you suggest I make?

Blue screens can't be caused by Firefox, it is what is called a userspace program, which means it can't access the kernalspace, which is what causes bluescreens. There may be something else wrong with your computer:
Check for Windows updates
Scan for malware [[Troubleshoot Firefox issues caused by malware]]
Run chkdsk
etc.

If you have a Blue Screen / Error due to Wireless issues (B110a), fix in here.

For the original thread created by somebody else, please see here:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-and/B110a-network-connection-problem/m-p/319...
Here's a youtube video of what happened to me: http://www.youtube.com/watch?v=adE1kq36ld4
I'm reposting it here so it can hopefully help some of you guys if anybody else stumbles across this. In short, my printer was fresh out of the box and I attempted to connect it to the wireless network. It would throw a blue screen on the LCD with an error of B8126AD6.
I narrowed it down to an issue with DHCP. For some reason the printer connects to the wireless access point but as soon as it tries to get an IP address from the DHCP server it crashes with that blue screen and the error code in the first post above. This look like a massive bug in the printers firmware! For reference my router is a Billion 7401VGPR3 which is acting as my default gateway and DHCP server. I have a Linksys WRT54G as my Access Point for the house.
To solve it, I turned DHCP off on my router and then tried connecting the printer to the wireless network. This time it connects fine but you still can't talk to it because it doesn't have a proper IP address. If it still doesn't connect properly, try turning WPA/WPA2/WEP off on your Access Point. Leave it completely open for a moment until you can reach the web interface (as below).
To fix the IP issue, I then went into the Settings menu on the printer and printed the "HP Network Configuration Page". Note that under the Wireless menu option there are a couple of different "Print Network Test Page" options. I believe it's the 2nd one that I selected. You'll know you have the right one when it prints out the page with the following info:
IPv4 IP Address
Subnet Mask
Hostname
Default Gateway
Primary DNS
etc, etc.
Take note of the IP Address from the printout above and the Subnet Mask. My IP was 169.254.73.5 and subnet mask 255.255.0.0. Now I manually configured my computers IP address to be similar (within the same subnet): 169.254.73.10 with the same subnet mask.
Now you can load up the web interface of the printer using http://169.254.73.5 in my case. (You should also be able to ping the printer at this point too). In here you have a Network tab where you can now manually set the IP Address of the printer. Set the address you want it to be in your network (in my case 192.168.0.3 with a subnet mask of 255.255.255.0 and default gateway 192.168.0.1 and dns server 192.168.0.1).
Once I clicked OK I changed my PC's IP back to normal, and I can now reach the printer on its IP address set above. YAY!
The great thing is, in the web interface you get a million more options to play with. You can manually set the IP address, gateway, DNS, wireless settings such as WPA1/WPA2 AES/TKIP Encryption, WPA Passkey, etc. So if you had to set the Access Point to completely Open, setup the encryption again and put the passkey in here. When I did this I had to go back into the Settings menu on the printer LCD and select "Disable Wireless" then "Enable Wireless" to force it to re-join the network.
Finally I went into the Settings menu again and Updated the software on the printer. I don't know if the new software fixes the bug or not - I haven't tested it (can't be bothered!).
Hopefully this will help some of you guys out there too!
EDIT: I've just stumbled across another couple of posts with similar results to mine:
- http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/How-to-install-Photosmart-B109n-z-on-a-...
- http://forums.techguy.org/networking/627989-hp-6980-printer-wireless-problem.html

Many thanks to gardz for an exhaustive overview on this critical problem with the B110a printer!
I am happy to report that I have managed to set the printer to a static IP and am now able to connect to it wirelessly from my home computers, and also able to use the web apps and ePrint features on the printer. The printer shows the IP address and I am able to use the EWS (Embedded Web Server) to connect to its IP address from my PC's internet browser. The Wireless Network Test Report also showed no problems. I have also completed the Product Update on the printer, and there are no more pending updates now.
However, the core wireless problem is still not satisfactorily resolved.
I get the BSOD and blinking-lights error ("Please turn off printer and then on"), only if I start the printer when Wireless is enabled on the printer. If wireless is disabled prior to printer boot, there is no error.
The workaround I have adopted for now, is to always switch off the printer's wireless, before switching off the printer, and enabling the wireless setting only when I need to print/scan.
Is this happening with anyone else? Why would the printer crash if it boots with wireless enabled? If it is already set to a static IP, why would it still conflict with the DHCP on the router?
My router is perfectly working, it is in the same room as the printer, so the signal strength is good. The printer itself is quite stable except for this crash-after-boot-if-wireless-was-enabled issue on the printer.
I made the mistake of connecting the USB cable to my primary computer before installing the printer drivers, so even the USB option is not working (Windows recognizes the printer as an unknown USB device). If anyone can point me to the printer drivers (inf files), I would be grateful. The CD does not have the driver files in a convenient location. It seems to be embedded within the setup package somewhere.
Gardz and PrintDoc, I hope you can help us out on this one. I know many B110a users are struggling with the wireless issues, so HP needs to release a firmware fix and driver update soon. Wireless ought to work out-of-the-box, as this product is aimed at the SOHO users.

BLUE SCREEN ERROR!!! - Stop: 0x00000124 (0x00000003 0x00000000 0x000000000 0x00000000)

hi,
When i restart my Windows 2008 R2 server,suddenly a blue screen appeared. In the screen the message was like,
System malfunction call your hardware vendor for support. After getting this message i gave a force restart but while booting
i got another blue screen error in which i got the below error code
Stop: 0x00000124 (0x00000003,0x00000000,0x000000000,0x00000000) and after dumping physical memory(100%) the system is keep on restarting as it happened before with blue screen.
In the server machine LCD display i am getting another error message like,
E1716 Chipset IERR. Bus 0 Dev 20. Function 2 . Review &. clear SEL.
Can anyone help me to understand the actual problem and how come i can resolve this?...

This from the Dell web site.
The system BIOS has reported a chipset internal error that resides in bus ##, device ##, function ##.
Check the SEL for more information, and then clear the SEL. Remove AC power to the system for 10 seconds, and restart the system (SEL = System Event Logs)
So I probably contact the hardware vendor.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557321(v=vs.85).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Qosmio X775 blue screen error Code 116 with OpenGL and video programs

Similar Messages

Maybe you are looking for