Qosmio X775-Q7272 Audio problem when WiFi antenna is on

I have had this laptop since Oct 2011 and I love everything about it with one very annoying thing.  It seems that any time that I play any form of audio (streaming from the net, MP3 on HD, from USB jump drive) I get what I would call digital stutter during the playback.  I have found that if I turn the WiFi antenna off then the problem goes away.  However, as soon as I turn the WiFi back on the problem comes back.  I have already double checked all drivers and they are all current.  I have seen other post of audio issues and was wondering if anyone else has tried playing with the WiFi on or off.  Any help would be greatly appreciated.
Dave

The WiFi that I have is the Atheros and I have done a complete system restore at least 12 times and before I even let windows start it's parade of updates it has the problem and the problem persist even after windows updates are all installed properly.  In the device manager all drivers report working fine and I have checked for updates to any of the drivers.  My fear is that this is going to be some form of RF interference and it will have to be repaired.  At least it is still under warranty.  Any other suggestions please toss them my way. 
Thanks,
Dave

Similar Messages

  • Qosmio X775-Q7272 Mic

    My computer has a built-in microphone, however, when I try to set it up it says no audio input device was found.
    Solved!
    Go to Solution.

    Qosmio X775-Q7272
    Downloads here.
       Control Panel > Sound > Recording tab
    Right-click and set the two options.  What shows?
    -Jerry

  • BSOD on toshiba qosmio x775 q7272 0x100000b8, hal.dll, athrx.sys, ndis.sys and ntoskrnl.exe

    This is my first post on the toshiba forums. Recently i have been gettin the dreaded BSOD (blue screen of death) on my toshiba qosmio x775 q7272 with the error code 0x100000b8 'attempted switch from dpc'. So far i have scanned for viruses which was clean, checked both hard drives for errors also clean, and checked RAM and re-installed the drivers for my atheros WLAN card. I am now out of ideas as to what to do. Normally crashes occur when the laptop is moved but doesn't always, like i can have weeks of no BSOD then all of a sudden i have 2 within 20 mins. I am only keeping this brief and there are details that i havn't included but they seem minor to me.
    Please help i am getting frustrated as it never BSOD on games just menial tasks which makes no sense at all, any feedback would be greatly appreciated.
    Regards Sam 

    OK thanks here are the mini dump files
    Attachments:
    050112-49311-01.dmp ‏261 KB
    050112-38501-01.dmp ‏256 KB
    041012-31949-01.dmp ‏256 KB
    041512-39171-01.dmp ‏256 KB

  • Audio problem when importing video files.

    Hello everyone,
    I just started using FCP X a few days ago for a university project and I seem to encounter an audio problem when importing videos in .mp4, .mov format or via the import from camera option.
    Indeed I need to import videos in .mp4 and .mov format into FCP X. The import in itself is normal I can see my videos into the events/clips library and if I play them from the library I can hear the sound quite perfectly.
    However, when I want to edit my videos and put it in the timeline, there is no audio. As a result I started to think that my videos could be the problem so I tried the option "import from camera" option using the Isight camera of my macbook pro but the same things happened. I could hear the sound from the events/clips library but not from the timeline (I can't see any audiowaves in the timeline).
    I found a solution using quicktime and extracting the audio of the video in .m4a then importing the videos files and the audi files corresponding but it's a long process and a waste of time  as FCP X should be able to import the audio of my video into the timeline directly. Especially if it can read it from events/clips library.
    I hope I explained myself clearly and you could help me resolve my problem.
    Cheers
    Christophe
    PS: I'm using FCP X version 10.0

    Update to 10.0.5.
    You have an incorrect setting when you edit. Try trashing your preferences. Post screen shots of your timeline and toolbar.

  • My apple Tv has audio problems when streaming from my NAS server.

    My Apple TV has audio problems when streaming from my NAS server or computer and even internet. I can hear the click sound it makes when you click on the icons, but when the movie starts there is no audio. This even happens when using XBMC. I have HMDI directly to my TV suing Apple TV 2. I have tried resetting, turning off both TV and Apple TV, and changing the HDMI cable. It is driving me nuts.

    XMBC requires a hack, we cannot help with hacked devices.

  • Qosmio x775 w\ BSOD problems

    Hello, I bought a Toshiba Qosmio x775 - Q7170 (Intel i5-2450m; GeForce GTX 560M, 6GB of memory, Windows 7 Home Premium 64-bit, SP1) in the U.S. about 2 months ago, and at the end of April he began to show BSOD's with different error codes making it difficult to identify the real problem. The error occurs when I'm playing games, which use more video card. The drives were updated both the mobo chipset and GPU, I used the site's nvidea and intel. already formatted once but the problem returns. Could it be a hardware problem?
    The game screen lock and begins to squirm like the screenshot, and makes some strange noises through the speakers.Than comes BSOD with various codes, the screenshot shows a 0x000007E , I already got some with this endings 3B, 7F 0A and some more, that i wasn't present at the time.
    I usually play about 10 to 20 minutes before each problem. and then when the fan work harder i get these problems. would be overheating problem? I'm not sure,'cause i dont get signs of it
    Screen at the time of screen frezz:
    Attachment 1(erro 1.jpg)
    BSOD:
    Attachment 2(erro 2.jpg)
    I've been searching the internet for some time but i couldnt find anything, if someone can help me i'll be very grateful, as i only pretend to play on it and, dont even think I can use the guarantee because I am not in the Us anymore.
    If you need any more information that may help, please ask.
    Thanks in advance.
    Attachments:
    erro 1.jpg ‏170 KB
    erro 2.jpg ‏165 KB

    Qosmio X775-Q7170
    Peculiar assortment.
       Bug Check 0x7F: UNEXPECTED_KERNEL_MODE_TRAP
       Caused By Driver  : ntoskrnl.exe
       Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL
       Caused By Driver  : HECIx64.sys
       Bug Check 0x3B: SYSTEM_SERVICE_EXCEPTION
       Caused By Driver  : win32k.sys
       Bug Check 0xD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
       Caused By Driver  : ?
    From the JPEG:
       Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
       Caused By Driver  : dxgmms1.sys
    Unusual to see HECIx64.sys making trouble. It's a component of the Intel Management Engine.  
       Intel Management Engine Interface
    The dxgmms1.sys driver is part of DirectX, which is related to the graphics.
    already formatted once but the problem returns. Could it be a hardware problem?
    That's my best guess. I'd restore the hard disk to its original out-of-the-box contents once more to make sure it occurs again.
    Looks like a warranty issue to me.
    -Jerry
    Attachments:
    Dumps.txt ‏3 KB

  • Audio Problems when burning

    I have tried making disc image, burning disc and the audio will pause for second several times in the play back. It does not do it when playing back in iDVD.
    The slide show was started in iPhoto and sent to iDVD. I have started over several times and still same issue. Makes a bad impression and is really not useable for presentation.
    I have 30 gigs free space, changed settings to Professional encoding and still same issue. I have no open apps, changed all energy settings and screen saver to never.
    Any ideas, I am fresh out, never had this problem with previous version.
    Frustrated

    Andy,
    This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
    From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
    Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
    If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
    F Shippey

  • IMovie audio problems when burning in Toast 6

    Hi,
    i've tried to burn an imovie project in idvd 5 but i get 'the error #-1 was reported' like most people have been and i've tried loads of things suggested to fix it with no joy.
    I then sent the imovie project to toast titanium 6 where it burned fine. However, when i watched it i noticed that although toast had picked up all the audio (both dv audio and aiff), it did not pick up all the volume adjustments during the movie. how annoying! for example: i have an aiff clip that fades into a movie clip with the sound gradually going down but Toast picks up the sound staying at the same level. this also happens with volume adjustments in a DV file.
    Any suggestions why this happens / how i can fix it?
    Cheers,
    Andy

    Andy,
    This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
    From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
    Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
    If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
    F Shippey

  • I have an audio problem when ever I use my Firefox web browser that makes a sharp audible sound simiular to a video game gun shot sound effect when ever I go into a new web page?

    I have an audio problem that when ever I use my Firefox web browser it makes a sharp audible sound similar to a video game gun shot sound effect when ever I go into a new web page? I change to a new site or page a page on a site, I get an audible gunshot ping trpe sound? It happens almost every time. Its very annoying and is driving me nuts???
    Any body out there had this happen also or know how to diagnose and fix this type of problem? I would hate to have to delete my whole Firefox program and have to start over again. If that is the case I will probably just scrap it and go on to try Google Chrome instead. I already have GC partially set up. I really have liked Firefox up to this point. I know add ons can cause problems at times but I haven't added anything new lately and this just started happening?

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
    Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.
    [https://support.mozilla.org/en-US/kb/Options%20window Options]

  • Audio problem when running Win XP Pro SP3

    I have a problem when running Windows XP SP3 on my MacBook. Every minute or so, and this happens consistently, the music would be played in a slow-motion mode, and after a few seconds return to normal speed. I have exchanged for another MacBook, and I am having the exact same problem. I have all the drivers installed properly, and have tried both iTunes and WMP. This even happens when I am gaming or watching YouTube.
    The problem does not exist when I'm running Mac OS X.
    Any help would be greatly appreciated. Thanks.

    After spending a few hours googling around I finally found the solution to the problem. At first I thought it was something wrong with my Windows XP Pro, but apparently people running Vista were having the same problem.
    I installed Vista myself and indeed was having the same problem.
    The problem apparently is a clash between the sound card and the WiFi card on the MacBook. If you turn off your WiFi, you would not get the occasional adio/video slowdown.
    The solution was actually quite simple, force-install the 5.x Broadcom 802.11n driver, and voila, problem taken care of.
    Message was edited by: docomo661

  • Audio Problem When Making Normal Call

    I've run into a problem where, if I place or receive a call using my iPhone, the iPhone doesn't play or transmit the conversation audio. In fact, I don't even hear ringing. This changes if I change the call into Speaker mode; audio seems to work fine after I do that. I was having this problem last night and it continued into today, and I've reset it twice. I'd prefer to not have to restore it and put all of my music and stuff back on the phone. Any help would be greatly appreciated. Thanks!

    I have noticed that from time to time the device loses track of what to use for output.
    Since I use BlueTooth most of the time I have been able to bypass the problem with the depression of the button on the BlueTooth headset.
    When I do not have the BlueTooth on, I normally have to put the iPhone up to my ear to hear the audio.
    When possible you can go to Voicemail, depress the audio key and then depress the manner that you want to receive the audio.

  • Audio problem when burning DVD

    Hi, Hope that someone can help me, I have already make several DVD's,and those went fine, but the latest Imovie project is with spoken audio.
    When I try to burn this with IDVD 5.0.1 everything went well till IDVD has come to the audio part, hereby it goes wrong. I didn't get a failure message but nothing happened further on.
    Hope someone has a solution!
    G5   Mac OS X (10.4.3)   2x1.8 ghz

    Hello, prutgers,
    You will need to be a bit more specific with your problem so we can help you.
    What do you mean by 'it goes wrong'? What exactly happens?
    You need to know that when your DVD is encoding audio, the process appears to be doing nothing. If you leave it alone for a while, it just may finish. Maybe you are not waiting long enough.
    Especially if you don't get an error message. What are you doing? Did you force quit? Did the DVD burn and has an audio problem?
    Give us more information!

  • Audio problems when exporting files from Premiere Pro CS5

    I try to post in English.
    I have audio problems in Premiere Pro CS5 when exporting a film.
    I cut an interview. The sound seems not to be synchronized when exporting a file. It doesn´t matter what file format I export. On cutting points the sound is different to the sound I hear in premiere. In premiere the audio sounds very good but in exported file I hear cracks on cutting points.
    When I reimport the audio file an put it in the timeline the synch point is correct but the interview differs about 2 frames to the original audio in premiere.
    The material was filmed on Sony ex3. The files are XDCam HD. I have updated the production suite.
    Thanks for answers
    Frieder

    Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

  • Satellite Pro A120 audio problem when played through amplifier

    I've been experiencing some problems when attempting to playback music through an amplifier, using a lead from the headphone socket on my laptop connected to the amp's auxillary input: when the laptop is connected, the amp produces static, and a high-pitched hum. Weirdly, this only happens when the laptop is connected to the mains. I don't think it's a fault with my amp, as the laptop, when connected to the mains, also causes interference with the LCD screen I use with it. Is there anyway to resolve this problem? Could it be a fault with the laptop itself, or the power cable?

    Hi there,
    The possible reasons for that issue can be:
    - your machine and the amp has differrent ground potentials and/or voltage is inductioned in a mass loop
    - over the screening of the audiocable is flowing a compensation voltage betwenn the amp and the notebook
    - a low DC-voltage were generated on the resistance of the screening which causes the buzzing
    The point is that you have to ground or separate the currents of the amp and the notebook.
    Its logical: your power outlet is causing a interference so if you connnect both to to it, you have the interference.
    Check if some machines are connected to your power outlet which are needing heavily current (e.g. fan heater or what i know what) and disconnect them to see if the interference is going away.
    If not, I suggest you to try that which was suggested in your last post.
    Greets

  • IPhone 4 Voice call problem when wifi is active

    Not always, but randomly my voice calls (send/receive) establishes properly. However, neither me or the other party can hear anything. The most common times it occurred, is when the wifi is active. Any suggestion anyone please?
    Additional Info:
    I had my iPhone replaced due to the home button malfunction, and after a couple weeks, this started happening. Since I don't have warranty coverage anymore I can't replace it again. Came with iOS 5.0.1. After this started happening quite frequently, I upgraded to 5.1.1. Still same thing. A non-funcitoning home button was better than a non-functioning phone! Feels like I've been cheated !!

    I think I've pinpointed the problem!
    Whenever I use data (EDGE / Wi-Fi), the handset becomes quite heated. If I initiate a voice call at that moment, the dialer starts with the 'speakerphone' icon being pressed.Given that, no party can hear no party.
    However, after a minute or two (when not using data) the handset becomes cold again (quite fast) and then if I initiate a call, the 'speakerphone' icon is not being pressed anymore and everything is normal!
    Really donno, what is actually creating this strange problem!! Overheating battery? Overheating wi-fi chip? Overheating any other chip? Firmware? or just my luck!!
    P.S: To keep the phone operation smooth, I've disabled wifi & cellular data at the moment! And all is running well. So, it must be something with data usage!

Maybe you are looking for

  • Itines folder location-tranfereing to the wrong area

    i have my itunes set so when i import music it tranfers into a folder location in my firewire exteral harddrive. Lately all my music now is tranfering into a sub folder called compilations and when i tranfer it to my ipod it will not show up under th

  • Upload data from excel sheet into md61

    Hi Gurus,                 Can anybody please tell me the solution like how to upload the data from excel sheet into the MD61 if u suggest me to write an ABAP code then its fine or any other way would be great and can u also send me the abap code i wo

  • Comboboxes are not set  on the 1st time a row is clicked in the dataTable

    I have somewhat the following setup: I have a DataTable that is filled with a listof objects, a actionListener is handeled when a row is clicked. Under the Table there are two ComboBoxes (lets call them Category and Item) that get their values from l

  • ADF: Marker Texts Overlapping in Dual Y Graphs

    Hi, I am using a dual Y graph using ADF in which multiple series will be displayed in a graph. However, I am facing some issues in with the Marker Texts of different series as these are overlapping with one another. Please see my code snippet below :

  • Ridiculously long installation time for CS6?

    I'm downloading the CS6 Master Collection through the University of Maryland software center website. I downloaded all the different parts required for installing, and now the installation time remaining says 20 hours and it's still going up. I've cl