Qosmio X875 - ECO mode doesn't work right after Win 8 upgrade

I used Toshiba upgrade assistant to upgrade to Win 8. It did a good job uninstalling the non-compatible software before upgrading, and installing the new Toshiba and driver versions after the upgraded was completed.
I activated ECO mode and to my surprise, it isn't working as before (in Win 7):
*Now, it just works with brightness in level 1*... very dim. Before, ECO mode allowed me to go up to level 4 and still was considered to be in Eco mode..
If I increase brightness, the message "eco Mode is turned Off" immediately pops up.
How to contact Toshiba to let them know of this problem and other problem I found with the new BIOS?
BTW, I own a Qosmio X875
Message was edited by: qosmitto

> How to contact Toshiba to let them know of this problem and other problem I found with the new BIOS?
Contact your Toshiba authorized service provider in your country.
Read this:
+What is the TOSHIBA eco Utility?+
http://aps2.toshiba-tro.de/kb0/FAQ2503AT0000R01.htm
> It changes the display brightness to Level-4, changes the dimmed display brightness to Level-1 (*4),
_The *4 means Only on models with Windows7 installed_
I assume the previous configuration was related to Win 7 only.
The Win 8 was made for mobile (tablet usage) too the battery power consumption is very important factory using Win 8. The battery consumption needs to be hold on lowest level as possible.
So I assume now using Win 8 and ECO mode means to save max power and to extended battery working time to a max level.

Similar Messages

  • FaceTime doesn't work right after updating IOS 8.1.1

    I updated  my iPad with IOS 8.1.1 and now my FaceTime app doesn't work.  Will there be a fix for this soon?

    Hello craigfrommarion,
    The article linked below details a number of troubleshooting steps that can help get FaceTime working correctly on your iPad.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/en-us/TS3367
    Cheers,
    Allen

  • PhotoSmart 7510 scan function doesn't work right after updating Maverick

    It was an ordeal but hp support was finally able to get my MAC to recognize my PhotoSmart 7510 all-in-one after the operating system was updated to 10.9.5. But now I get the scan function but I have no options as to size, dpi or what type file I want to save the scan to. Also, the quality is TERRIBLE. Granted I'm trying to scan old photographs but I was able to do this with no problem before. Now the grayscale is off and light areas of the images don't scan at all.
    I know that all the drivers are up-to-date but I don't know how to fix this problem.

    Hey @LK8888,
    Welcome to the HP Support Forums!
    I understand that you want to be able to scan with good quality on your Mac OS X 10.9.5 Operating System from your HP Photosmart 7510 e-All-in-One Printer. I would like to assist you with resolving this issue. Now you did state that you had quite a time with HP Technical Support trying to get your Mac to recognize your Photosmart. I'm afraid that if your scanner isn't working properly we may have to undue some of the steps completed by Technical Support to resolve this issue once and for all for you. However, before I have you delete or remove any software and drivers from your computer, could I have you take a look at the following document to ensure that you're using the proper scan software:
    Scan from OS X v10.9 Mavericks With the Full Feature HP Software for HP Multifunction Printers
    If everything now works perfect, great! If not, than unfortunately I'm going to need you to run through the following steps.
    Step 1: Uninstall your Printer Driver and Software:
    Uninstalling the Printer Software
    Step 2: Verify and Repair your Disk Permissions on the Mac:
    Open Macintosh HD and go to Applications
    Go to the Utilities Folder
    Open the Disk Utility
    Select the Hard Drive volume you are using (usually on the left)
    Select Verify Disk Permissions
    Once that process is done, select Repair Disk Permissions
    Step 3: Check for Apple Updates:
    Go to Apple
    Select System Preferences
    Select Software Update
    Click Update Now
    Install your available updates
    Restart your computer
    Step 4: Reinstall your Software and Drivers:
    HP Photosmart 7510 series C311 Full Feature Software and Drivers
    Please click the link above to download the appropriate Mac OS X 10.9.5 drivers for your product. Once the download is complete follow the step-by-step installation instructions to complete the install of your product.
    Once install is complete, try to scan!
    Please let me know if the steps provided resolve your scanning issue. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • My iMessage doesn't work correctly after the upgrade to iOS 7 how do I fix this?

    I updated my phone with the latest upgrade to iOS 7 and my iMessage is not working on my phone or my iPad. How can this be fixed?  iMessage will start to send the message but it will not go. And if others send me iMessages then I don't get them. Please tell me how to fix this issue..

    Hi Charles. please read this article...Lightroom mobile unavailable to Education memberships | Kivuto
    Creative Cloud memberships purchased from a third-party provider (e.g. Kivuto) do not provide access to Creative Cloud services, including Lightroom mobile.
    Guido

  • Wifi not working right after ios6 upgrade

    After upgrading to ios6, my iPhone 4s will not connect to WiFi...what to do?  Tried changing the http proxy to auto...no luck, any other ideas???

    Have you tried resetting network settings in settings, general, reset, reset network settings.
    Complete that and from there try and go into settings after it restarts and see if you can manually connect to the network that you wanted.

  • When trying to read emails on hotmail on firefox, the "back" button on my mouse doesn't work right. It works fine if I use internet explorer. This started about three days ago.

    Also doesn't work right when I try to click on the inbox. I sometimes just get a blank screen. Seems to work fine on every other site except Hotmail.

    Nothing changed after clearing cashe and cookies and restarting in safe mode.

  • Power Nap doesn't work right in my MBA mid 2011. Anyone knows why?

    I just boght a MBA middle 2011 and power nap doesn't work right on it, specially in Mail app, where it downloads only a few mails and the rest of them are downloaded as usual, when recativate my laptop. Does anyone knows why?... i also tried to download the SMC update, but when i try to install it i get the message that my system is not compatible with the update.
    Please somebody help me!!
    Thanks in adevence!

    http://support.apple.com/kb/HT5394

  • Palatino superscript doesn't work right

    Palatino is my favorite font. But since installing Mavericks, superscripting doesn't work right in Microsoft Word. When Palatino type that is 14 points or smaller is superscripted, instead of being reduced a couple of points it is made extremely tiny. Also, instead of being raised to the top of the line, it appears in the middle (vertically) of the line. Since I use endnotes a lot, this effectively destroys the Palatino font for me.
    According to Get Info, this particular font is Copyright © 1991-99, 2006 Apple Computer, Inc. Copyright © 1991-92 Type Solutions, Inc., so I've had it for a long time. Is there an updated version that will fix this problem? I don't have this problem in other programs, including PowerPoint. I use Office 2011.
    Here is an enlarged image of the superscript (st):
    <img src="http://ti.org/images/Superscript.png">

    I think folks are looking for a solution.
    And I have given one. The Palatino font supplied with Mavericks is no good. The only fix is to replace it with an older version. If you don't have one, you can't fix it.
    Do you agree that Restore Standard Fonts...works ... Yes? No?
    No. That option only attempts to remove fonts from the System and root Library folders that are included with OS X. It doesn't give you an option to restore OS X supplied fonts that are missing.
    I have to presume you installed Mavericks over Mountain Lion. In Mavericks, Palatino is installed to the /System/Library/Fonts/ folder. In ML, that same (correctly working) font is installed to the /Library/Fonts/ folder.
    Presuming this scenario is correct, the working version of Palatino in the /Library/Fonts/ folder was already active. When resolving conflicts in Font Book, the active font is always the one left active. Which would mean it removed the broken, Mavericks installed version.
    As noted above, I fully tested and have proven the Mavericks version of Palatino is bad. I have multiple versions of this font. They are from:
    OS 9
    MS Office 2011
    Lion
    Mountain Lion
    Mavericks
    Adobe Type 1 PostScript
    Adobe OpenType PostScript
    I used Suitcase Fusion to activate one version at a time. Testing in Word, InDesign and other apps, they all behaved as expected until using the Mavericks supplied version.

  • I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

    I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

    It's beta open source software so I'm not surprised. It does't look to be too active a project, so I don't know if it will help or not but you might be maybe better off posting a bug report on their Sourceforge page here: http://sourceforge.net/projects/kompozer/

  • DVD menu doesn't work right in DVD players

    I've created a DVD in Encore for Mac.  It plays fine on my Mac and on Windows.  However, once it is inserted into a stand alone DVD player, the menu doesn't work right.  I have four text menus.  In the DVD player, none of those are navigable.  Arrowing up or down doesn't work.  You have to click a number on the remote keypad and then play. This also causes "Channel 1" or "Channel 2" and so on to display.  Any ideas how I can get the arrow keys to work?  I don't have a stand alone dvd player to test against.
    Also, in Windows, I have someone that wants to duplicate the dvd.  They're using Movie Maker.  It gives an error that the codec is not installed but doesn't say which codec.  Any ideas on that?

    The only time I recall similar problems was the issue Jeff was asking about above (Mac, Encore CS3, certain OS).  If you don't solve this otherwise, I'd experiment with that.
    You appear to have confirmed that there is button navigation.  (In button routing, each button points to another.)  Where does it break down?
    On the Mac/PC, are you using the mouse?  In the computer DVD software player, there should be a "remote" that you can use to see if the button navigation is working.  Does the computer "remote" option work?  If so, it makes it not working in a standalone player even odder.
    If not, then look at whether the project works before you burn to disk.  Does the "remote" work in the Encore preview?  Or build to a folder, then play the DVD from the folder.  (I don't know how on Mac; on PC, I find the first .ifo in the VIDEO_TS folder, and play that.)

  • Xperia Z2: Stamina mode doesn't work aparently

    Hi,
    Stamina mode doesn't work aparently on my phone. I try all the configurations but the sotware doesn't turn off the wifi and neither the mobile data coming from the operator when i block and turn off the screen of the device. I continue receiving information from all the apps and i haven't done any exception on the stamina configuration. Any idea to solve this?
    Solved!
    Go to Solution.

    Looks like you are talking about Low-Battery mode...
    First make sure that you have turned it ON. After that just see "Activation" section under Low Battery mode to find at what level it has been set to activate.. By default, Low battery mode gets activated at 20% battery level.

  • Media player doesn't work right , code# cood1197

    Why won't any of my music play on windows media player and rip any music to my ipod  recovered august since then player  doesn't work right now. product bv545aa#aba  serial# 4ce1031lws ,model # p6754y & getting code # cood1197 & are there any free updates for player ?  thank you.

    I haven't had a problem with either.  I have switched to using MixZing as my player because it also allows me to work with the contents of my SD card and has a nice equalizer function that really works well with a quality pair of headphones or when plugged into my home stereo.  It's available on the Marketplace.
    I do know that with Youtube, I get much less buffering if I pull videos through the WiFi function when attached to my home network.

  • I upgraded to IOS 5.1 and the phone doesn't work right

    I upgraded my phone to IOS 5.1 and the phone functionality doesn't work right.  If I make a call, once connected I go back to the main menu and can't get to the phone controls (including the ones to hang up).  If I receive a call, the wheel comes up, the phone does not ring and I can't answer it.  I tried restoring the phone, but that did not work.  Does anyone have any ideas?

    Press the camera icon and slide it up.

  • IOS 5 Safari Reader mode doesn't work on an iPad 1º generation

    iOS 5 Safari Reader mode doesn't work on an iPad 1º generation. How can I fix that?

    Hi.  I am having the same problem on an original iPad. The tabbed browsing works fine, but no "reader" button is showing up in the URL window at the top...
    Anyone else seeing this and is a reinstall of ios5 really needed?
    Thanks

  • My palm m105's touch screen doesn't work properly after a sync.

    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    My palm m105's touch screen doesn't work properly after a sync.
    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    Thanks in advance!
    Post relates to: Palm m105
    Post relates to: Palm m105

        Maldoman578,
    Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for