QRFC list of inbound queues

Hi Friends,
can anyone help me to know which function module should I use to get the list of qRFC queue names available in R/3 for a particular application server user/ or for all users?
Thanks

http://help.sap.com/saphelp_470/helpdata/en/ee/fa5f3c90de2d73e10000000a114084/frameset.htm
RSTRFCT0
Outbound queue
One outbound queue and one destination, but multiple qRFC calls in a LUW, and a variable number of LUWs.
RSTRFCT1
Outbound queue
Works with tRFC and qRFC in "mixed mode" with different outbound queues and different destinations for one LUW.
RSTRFCT2
Send queue
Different outbound queues and different destinations for one LUW.
RSTRFCT3
Send queue
Different outbound queues and different LUWs. Some of these LUWs are dependent on other LUWs, to show how the qRFC Manager works.
RSTRFCT9
Send queue
Receiver list in qRFC: Process one LUW with different destinations, and the qRFC Manager stores the LUW data in the database only once.
RSTRFCTA
Send queue
STOP/RESTART queues (different RESTART conditions)
RSTRFCTB
Send queue
Obtaining qRFC LUWs from an outbound queue that is in the local or the remote system, and processing them in the current R/3 system.
RSTRFCTD
Send queue
qRFC in a dialog task and an update task in a LUW (from the application point of view)
RSTRFCTE
Send queue
List of queue names in qRFC: A qRFC call is assigned to more than one queue.
RSTRFCTF
Send queue
Performance test with and without receiver list for the current qRFC: Different calls/LUWs/queues/destinations.
RSTRFCTG
Send queue
"Multi-stage" STOP/RESTARTs (at different times)
Message was edited by:
Roberto Tagliento

Similar Messages

XI inbound queues status "RETRY" in a new XI Production system

Hi
All the queues (XBT00* AND XBT02*) in XI Production system are not moving. Status is "Retry" all the time. The system is idle. Do you know what is happening here?
I also see the following error in the queue:
Command to tRFC/qRFC: Execute LUW again
Also, lot of errors (below) in the system log (SM21):
XIRWBUSER - Communication Error CPIC return code 027
XIAPPLUSER - Perform rollback
Any ideas?
Regards
Chandu

Hi,
When any message is sent from any other system to XI, the Inbound queue in XI is processed in the following way,
1) AI_RUNTIME_JCOSERVER connects to the Java stack to execute the registered program AI_RUNTIME_<SID>.
2) When this connection is fine, then the queue is processed without any issues.
Now incase of Production system, which most likely to be a cluster system will fail because you'll find that AI_RUNTIME_JCOSERVER connection test fails, when you turn off one node. The reason being in visual administrator the JCo RFC Provider for the server nodes have not been maintained.
Solution:
Login to visual administrator, select the service JCo RFC Provider for both the nodes and set the value accordingly.
Ex:
SAP Cluster Virtual Name: XICLSTPROD
Hostname1: XIPROD1
Hostname2: XIPROD2
SID: XIP
CLIENT: 100
Instance No: 02
Values for Node1:
Program Id: AI_RUNTIME_XIP
Gateway host: XIPROD1
Gateway service: sapgw02
Server count: 20
Application Server host: XICLSTPROD
System number: 02
Client: 100
Language: EN
User: PI_JCO_RFC
Password: ***********
Values for Node2:
Program Id: AI_RUNTIME_XIP
Gateway host: XIPROD2
Gateway service: sapgw02
Server count: 20
Application Server host: XICLSTPROD
System number: 02
Client: 100
Language: EN
User: PI_JCO_RFC
Password: ***********
Change in the similar way for the other Programs registered.
This should resovle the RETRY issue in Inbound queue.
Hope this piece of information really helps.
Regards,
Kamesh

Error in inbound queue

Hi,
I have to monitor queues, when i use tcode smq2 for inbound queues, i see 4 queues with stuck messages. The status is sysfail, so i do like this edit-> reset status ,then the status of the message has changed to transaction recorded. now i went to previous page and click unlock. when checked the first message status, it is XI restart in qRFC not allowed.
Suggest me where i went wrong and what to do to solve the issue.
Thanks
Jhansi

Dear Jhansi,
in his answer Chirag exactly describes how to proceed in this situation. For further information on how to process failed XI messages you might also have a look at OSS note 813029.
Best Regards,
Harald Keimer
XI Development Support
SAP AG, Walldorf

EWM : Error message in the in Inbound Queue

During the creation of Inbound delivery in EWM through QRFC..the queue is stuck with an error message
" Error accessing product data administration "Message no. /SCDL/AF032""..Please let me know if you have seen this issue earlier.
ECC: Inbound delivery is created
QRFC: Stuck in the queue and error message can be seen through SMQ2 transaction
EWM: No IBN created because of the errored queue
Thanks,
Syed Ismail
PS: Is there a way to create a new section for EWM queries so that they do not get mixed up with regular WM issues ?

Thank you for your reply. The views are extended and i did look at the SCU set up and they seem to be good. Actually the scenario is that we had a system where all these processes were working fine in a client. A client copy was made to a new system and i am facing issues simulating in the new client.
I faced an issue in the new system where the function module to create IDN and ID itself was not getting determined and it was because of logical system issue in EWM>Interfaces>ERP Integration>Goods movement>Map storage locations ERP and EWM..I have corrected and the queue gets processed now but i run into this new error.
Will investigate a little more and see how it goes...
I have checked out different settings but i was still not able to fid a solution..Did anybody see this kind of message earlier ?

Inbound Queue Stuck

Hi,
We send about 7000 IDOCs to PI. These IDOCs are sent to the PE for a ccBPM.
However, the Inbound Queue got stuck with status of the first message on "Transaction Executing". This stayed this way for 2 days.
In the end we locked and unloced the queue and every thing was running again.
But a few minutes later all the data was punt into the BPM queue and nothing was happing. (first record had status "transaction recorded"). I had to activate the QIN scheduler and everyting was running again.
This is happening in a production environment and is not acceptable (processes run at night).
Does somebody have hints where to start looking or have a solution?
Ron

Check this blog :
XI : How to Re-Process failed XI Messages Automatically
Note 527481 - tRFC or qRFC calls are not processed
Regards
Gangaprasad

Inbound queue in APO side

hi,
All R/3 changes are not transfered to APO. It got stuck in SMQ2 in APO side. every time i am manually activating those queues in ready status.
1) Is there any simple way to activate all the queues having status "ready" in single execution.
2) what will be the reason for inbound queue and how to avoid? i able to see only "ready" and "waiting" status queues there is no error

Hi,
Please check the status of the QIN and QOUT scheduler in transaction SMQR/SMQS and see if the destination is registered or not. I am pasting the content of the SAP Help for you quick reference.
Set Up QOUT Scheduler
Use
Queued Remote Function Calls (qRFCs) are used to transfer data between SAP APO and SAP R/3. The QOUT scheduler processes outbound qRFCs (outbound queue).
You complete the following steps in the relevant client in the production system.
You call the QOUT scheduler using transaction SMQS. The destinations to which the outbound qRFCs are to be sent are registered in the QOUT scheduler. As of version 6.20.45 this is done automatically.
The following options exist for a registered destination:
Type
R: The destination is registered, that is, it is started using the QOUT scheduler.
U: The destination is not registered, that is, it is not processed.
N: The destination is not processed using the QOUT scheduler, but is sent at the time of the COMMIT WORK.
Max. Connections: Number of connections that are used to send the qRFCs. The default value is 10 for R/3 connections and 1 for TCP/IP connections.
Max. Runtime: Time that a destination is processed by the QOUT scheduler. The default value is 60 seconds.
The destination NONE means that the qRFCs are processed in the local system and should not be registered up to version 6.20.45, supplement 8 inclusive. As of supplement 9, NONE can be registered and the without tRFC option set.
Requirements
The qRFC configuration must be configured. For more information, see
Set Up QOUT Scheduler
Use
Queued Remote Function Calls (qRFCs) are used to transfer data between SAP APO and SAP R/3. The QOUT scheduler processes outbound qRFCs (outbound queue).
You complete the following steps in the relevant client in the production system.
You call the QOUT scheduler using transaction SMQS. The destinations to which the outbound qRFCs are to be sent are registered in the QOUT scheduler. As of version 6.20.45 this is done automatically.
The following options exist for a registered destination:
Type
R: The destination is registered, that is, it is started using the QOUT scheduler.
U: The destination is not registered, that is, it is not processed.
N: The destination is not processed using the QOUT scheduler, but is sent at the time of the COMMIT WORK.
Max. Connections: Number of connections that are used to send the qRFCs. The default value is 10 for R/3 connections and 1 for TCP/IP connections.
Max. Runtime: Time that a destination is processed by the QOUT scheduler. The default value is 60 seconds.
The destination NONE means that the qRFCs are processed in the local system and should not be registered up to version 6.20.45, supplement 8 inclusive. As of supplement 9, NONE can be registered and the without tRFC option set.
Requirements
The qRFC configuration must be configured. For more information, see
Regards,
Senthilrajan
Edited by: Senthil_APO on Oct 12, 2009 10:54 AM
Edited by: Senthil_APO on Oct 12, 2009 10:55 AM

QRFC and tRFC outbound-queue

in SXMB moni entries,
when the message is
for example inbound: IDOC and outbound: AENGINE, the queue seen is a tRFC outboud-queue,
and when inbound: IDOC and Outbound: PE, the queue seen is a
qRFC outbound-queue
can u explain me why this>?
but nowhere i can see inbound-queues in the MONI. means XBTI* or XBQI*...
can u explain me why?

Hi,
Please see the below link
Eo/EOIO?BE - Queue - ? - /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Please go through these links
For queues in message mapping
/people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
Here are the Queues for Asynchronous Message Processing
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
Regards
Chilla

Inbound queue

Hi Guru's,
I am still having problems with my inbound queue on the SRM system. The scenario is that XI sends a message to the SRM system, the messages comes in the queue of the SRM system but needs to be manually be processed.
What tried to do is to use the transaction sxmb_adm and registered and actived all queue's, still now luck. How can I fix this?
Hope some can help me out.
Best regards,
Guido Koopmann

Hi Guido
Go tcode "sxmb_adm" -> integration engine configuration.
You will find Destination there.
Go to tcode SM59 find whether that destination is working fine or not
Register the queues via t.code sxmb_adm where u have an option manage ques.
Once you register the queues, they default activated.
If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
To Cancel the messages from MONI with the Status Scheduled for Outbound Process
Schedule the Report RSXMB_CHECK_MSG_QUEUE
SAP_BC_XMB_DELETE
Regards
Abhishek

Inbound Queues in SRM 7.0

Hello Experts,
We have SRM 7.0 / Classic scenario with ECC as a backend system.
We observe in SMQ2, we have couple of queues. But I do not know if these have any releveance to us.
We maintain filters(R3AC1 and R3AC3) for Material master and Product Categories master for pulling in data from ECC
Is is advisableto de-activate these queues? What information is pulled with these Queues?
Thanks,
Dhananjay

Hello Dhananjay,
if delta load are customized to be received by SRM, there is a reason...
The queue prefix is defined in ECC table (CRMCONSUM): i guess, for you, queues are coming from ECC.
Queue name are linked to object name from an object class: see in ECC data stored by CRMSUBTAB table. A function module is linked to this object name to do the extraction; check those function modules to find which data is transferred.
Object name load type (Initial, Delte, Request) is managed by ECC table CRMRFCPAR.
Regarding the inbound queue, check OSS notes:
369007 - qRFC: Configuration for the QIN Scheduler
1579728 - SMQR - Inbound queue scheduler settings - explained
Regarding the outnound scheduler, check OSS note:
400330 - Outbound Scheduler/qOUT Scheduler
Regards.
Laurent.

Issue with Inbound queue - READY status from long time

Hello Team ,
need your assistance regarding Inbound process queue which have many items in READY state .
They are not clearing unless we do it manually.
when i check SMQR , i find that it has WAIT state and not able to get any otehr state even on trying to change it.
Also , when i check on the DISPLAY possible resources for qRFC/tRFC - it shows empty .
Not able to figure out the cause and probable solution.
Please assist.
thanks
Raghu V

Hi Raghu,
I think u need to register and activate the Inbound queue.
Please check my answer to a similar kind of problem in the given below thread ---
Idoc stuck on smq2
regards,
Rohit

Outbound queue won't fetch data to inbound queue after DS enhancement

I enhanced the 2LIS_02_ITM extractor with a field from EKKN table, in CMOD filled this field. Transported all this to TEST and then to PROD systems. In DEV system everything is OK, but in TEST and PROD system my outbound delta queues are filling and not fetching the data to the inbound queues!!! When i launch the job in LBWE, it cancels itself. And when i see short dumps, it says something about modified structure. Any idea how can i fetch the data from one queue to another?

Hi,
First you have to make sure that there are no enrteis in LBWQ,delta queue and det up table before you do the transports.
So anyway the process has to be repeated again.
So once the transports are done then you will have to do the whole set up again.
Do the follwing after transports.
1)Delete the set up tables
2)Do init w/o data transfer from the infopackage.
3)Fill the set up tables( You can schedule a job in the background to fill the whole 7000000 records at the same time)
4) Full repair loads to BW( Either you can do it in parts...like scheduling different loads at the same time through different infopackages for different selections OR one infopackage for the whole data).
The better is to do in parts as in case of whole data load fails then you will lose the whole data and you will have to repeat the process again.
You can schedule the set up table fill job as well as full repair infopackage schedule at the same time for different selections.
Suppose if set up table is filled with selection A and once job finished then schedule the infopackage with selection A meanwhile you can fill the set up table with selection B and so no.
This way you can make sure the jobs are not failing because of huge amount of data load at the same time the time taken to complete the process is less.
As such there is no limitation on amount of data..its the duration of process which is limitation...for very long running process chances are that you run out of background process or you miss some IDOC's.
Thanks
Ajeet
Edited by: Ajeet Singh on Nov 18, 2008 9:26 PM

Screen output without connection to user, Message struck at inbound queue

Chaps,
I executed inbound proxy form PI 7.0, the message was struck in the inbound queue of ECC 6.0,
with status text "Screen output without connection to user" then when I apply execute LUW then it is converted to
"ThiSend:bad tm type /connection closed (no data)".
when i test the same message from 'SPROXY' t.code, inbound proxy class was working fine.
I came to know that when we call an ABAP program in side a proxy then it will throw same error what I got by checking the below url
Message struck at inbound que in server proxy
But in my proxy. I am just putting the data into z table and on some condition I am calling some other BAPI call.
Here my doubt is calling the SUBMIT for other ABAP program is same as calling the BAPI call?
because in the above thread clearly saying that don't use the other ABAP program in proxies. is the same case for calling the BAPI call into the proxy?
In proxy, the logic is I am just simply reading the data from IS(integration server, PI7.0 SP 18) to ECC 6.0(SP14) if the row is not there the data is reading into table. If row is already there then it is stuck up in SMQ2 (inbound queue) of the ECC
am I missing any basic things? please guide.

But in my proxy. I am just putting the data into z table and on some condition I am calling some other BAPI call.
Here my doubt is calling the SUBMIT for other ABAP program is same as calling the BAPI call?
I too believe ..
because in the above thread clearly saying that don't use the other ABAP program in proxies. is the same case for calling the BAPI call into the proxy?
It is saying not suggestable...!!!! BAPI calls work perfectly !1
In proxy, the logic is I am just simply reading the data from IS(integration server, PI7.0 SP 18) to ECC 6.0(SP14) if the row is not there the data is reading into table. If row is already there then it is stuck up in SMQ2 (inbound queue) of the ECC
am I missing any basic things? please guide.
Seems so,
Lets try below things..
1. Plz check the user is having auth to run the executable program in ECC.
2. It seems that you are not using the proxy structures in a correct way..and check the calling program also..!!
Edited by: Santosh Rawat on Jul 30, 2009 1:12 PM

BADI For Inbound Queue in CRM

Hi All,
I am replicating Product Listings (VB02 in ECC) data from ECC to CRM.
Now I need to Update a Z table in CRM System with the data coming from ECC when the Inbound Queue in CRM System is processed via SMQ2.
Can Anybody please tell me what BADI will be useful
I found one CRM_DATAEXCHG_BADI but not sure how it goes.
I also tried in Debuging the inbound Queue. It will take Long time to find out BTE or BADI in this way.
So please help me with the BADI or BTE Name.
Thanks
Venkat

Hi Gautham,
No good, It did not help me Gautham.
Can you please suggest me some other way of dong it.
I have 2 badis to use one is address_update and the other is addres_check.
I implemented address_check which had a address structure as a changing parameter and I update it there, it works absolutely fine.
But my requirement is to update the structure based on the condition of BUT000. That is the BUT000-type, which means I need to update the structure only for person and not for organization and group.
so in the badi address_check i need the BUT000 details, which I am not able to trace even from the local memory as I am getting the error saying "Memory is not yet instantiated"
and If i use the other badi address_update.
I have the problem the other way round here. I have all the BUT000 details here I can put the condition to update only for person, but I am not able to update the address structure.
Please help me. This is required very urgent.
Maximum points will be rewarded.
Thanks in advance.
Arul.

Inbound queue Erros

Hi guys,
The inbound queues in the CRM are struck with the error showing
"Logical System is not defined in table SMOF_ERPSH"
when i checked the table SMOF_ERPSH in the the CRM there is an entry for the R/3 system and the CRM system
So I was not sure what the error is pointing to
RGDS

Hi Rajeet
The inbound queue has status 'SYSFAIL', and the system issues an error message stating that the logical system is not defined in table SMOF_ERPSH: There is no OLTP site for the logical system the data came from. Solution: Check your system settings: Is the transfer of data from this system to the CRM System supported? If yes: use the Administration Console (Transaction SMOEAC) to create a site for this R/3 System. Also check whether BDoc types must be subscribed on this site. In this context, refer to the Adapter Framework documentation and to the documentation on the administrations console.
Vaibhav

Getting an error in CIF Inbound queue:"Only 0 decimal places are permitted for unit of measure PC"

Hi,
I am getting an error in CIF Inbound queue (function: CIF_ORDER_INBOUND_30A). The error text says "Only 0 decimal places are permitted for unit of measure PC".
Can anyone point out the solution to resolve this error? It would be a big help for me as I am new to APO and so getting difficult to find a clue for it.
Thanks.
Regards
Mansi

Hi Mansi,
Please check the cif queue you will get the order number from that order number you can find out material code. Then check the material master unit of measure in MM03 you have used some alternative unit of measure and system is unable to convert order to alternative unit of measure because of decimal setting. If you go to CUNI and check the unit if measure PC it is not permitted for decimal places. If you need decimal than change the UoMof Material and use diff UoM or allow the decimal for PC which is not good practice.
Regards,
R.Brahmankar

QRFC list of inbound queues

Similar Messages

Maybe you are looking for