QRFC Monitor (Outbound Queue) Destination

Hi Experts,
In t-code SMQ1, there is no destination defined for the queue name "MCEX03". Although there are LUW entries in the same table column, but no records in rsa7.
How can we input the destination name? Please advise.
Regards.

HI,
MCEX jobs doesn't show any Destination as this job will process the LUW entries of extraction queue....
i.e there'll be corresponding job running in SM37 for MCEX jobs periodically when this is successful the LUW entries from extraction queue will processed to delta queue i.e RSA7.
For eg: if u chk the log of that particular job it'll show the no of LUW's entries moved from extraction queue to Delta Queue for that applciation component, in this case it is '03'.
After every successful job if u monitor closely, the count of MCEX will be reduced and the count in Application component '03' will be increased.
rgds,
Edited by: Krishna Rao on Aug 15, 2009 5:30 PM

Similar Messages

  • About qRFC Monitor (outbound queue)

    Hi Experts,
    we are upgrading the r/3 system from 4.6 to 4.7 and i am responsible for BW activities, i was asked to take care of the outbound queue what does that mean? and what needs to be done with this queue during r/3 upgrade? and there are some queues(in SMQ1) with destination None and entries 1 what are those???
    Does any one have the check list what needs to be done on the BW side during R/3 upgrade?
    Thanks in Advance.

    all the guides can be found on sapnet
    https://www010.sap-ag.de/instguides
    the particular guide for your particular upgrade is THE place to look for help.  it's very detailed w/ links to all the oss notes you need to review as well.

  • QRFC Monitor (Outbound queue)

    Hello friends,
    I have to delete and fill up the setup tables for the application 18. I have successfully deleted the data from the setup tables in LBWG. But when I am going to delete the entries in extraction queue(LBWQ), I find two queus for application 18. They are MCEX18 & MCEX18_1. Could you pls let me know the reason for the 2 entries. Should I delete both? Same is the case for allication 17.
    Thanks in advance.
    Vishwa

    Hi,
    The entries in LBWQ are those which have only been captured in outbound queues and have not reached RSA7. It is absolutely normal for them to have destination as NONE.
    Go to SMQ1, and execute, there you would find multiple entries for application 18
    e.g.
    Queue Name                                   Destination                      Entries
    BWXXX2LIS_18_I0NOTIF               BWCLNTXXX                      100
    BWXXX2LIS_18_I0TASK               BWCLNTXXX                       200
    MCEX18                                         NONE                                   2000
    The first two entries here are the ones which have already been processed from outbound queue to RSA7. Therefore now they have destination as BW system.
    Please check if here you get entries for 2 different BW systems. This may be the reason for 2 entries MCEX18 and MCEX18_1 in LBWQ.

  • QRFC Monitor(Inbound Queue)

    Hi Group,
    Can any one please explain the purpose of qRFC Monitor, i mean from this what inforamtion we can monitor, and when this queue is filled..............
    Thanks in Advance,
    Regards
    Ramakrishna Kamurthy

    If youhave a look at this, it might be helpful
    http://help.sap.com/saphelp_nw04/helpdata/en/0b/80f83b0255a206e10000000a11402f/frameset.htm
    Assign points if useful

  • QRFC Monitor in R/3

    Hey friends
    What is the transaction to go to the qRFC Monitor ( Outbound Queue ) in SAP R/3 system ?
    thanks

    Hi,
    SMQ1  is the Tcode.
    With rgds,
    Anil Kumar Sharma .P

  • Monitoring qRFC outbound queues

    Hi,
    I need a CCMS monitor on qRFC outbound queues (tcode SMQ1), so that I get notified whenever messages gets stuck for some reason.
    I tried with MTE class "CCMS_qRFC_Outbound_Queues_Summary", but it stays green, even after several messages are not processed in the outbound queue.
    Does anyone have experience with this?

    Read SAP Note 441269 - Setting up tRFC/qRFC monitoring in the alert monitor
    That should put you in the right direction.
    Regards
    Juan

  • Outbound Queue stacking up for old destination

    Hi Gurus,
    I am implementing APO in a client and since the native integration (CIF) uses the same RFC structure as BW I need to keep an eye on BW processes as well.
    The problem here is that they´ve migrated to BW7, killing the old 3.5 but leaving the logical system registered.
    Now what is happening is that I found >4million queues in SMQ1 to this nowhere destination, which kills my CIF performance.
    We´ve started to clean this garbage but the stack keeps adding up from regular goods movement transactions. The BASIS and BW team is not helping much so:
    I need to find where I set the relationship between theses transactions and the destination so it does not go to the outbound queue.
    thanks for the help!

    Hi Anand,
    Please go to SMQ1 and in qname enter cf* and then execute.
    In the error screen press F8 and then select all PPM related queues and delete.
    After that run IM after correction and do run CCR report for the reconcilation by tcode :/SAPAPO/CCR .
    Manish

  • Outbound Queue in ECC with CRM Destination

    Dear experts
    In ECC - t-code SMQ1, outbound queues R3AD_SALESDOxxxx in destination to the CRM system are in SYSFAIL.
    I think those queues are created when an ECC user changes or creates a sales document in ECC. But we don't synchronise sales documents between ECC and CRM.
    What are the settings to avoid this outbound queue to be created?
    Thanks in advance,
    Regards, Stephanie

    Hello Stephanie.
    Please remove the following table entry in your ECC system:
    TBE31 (Application components by Publish & Subscribe interface)
    - The following entries must exist for a successful data exchange:
                     Event            00501014
                     Obj.class        BUSPROCESSND
                     Fmodule          CRS_SALES_COLLECT_DATA
       Also see Note 490932.
    Best regards,
    Maggie

  • QRFC and tRFC outbound-queue

    in SXMB moni entries,
    when the message is
    for example inbound: IDOC and outbound: AENGINE, the queue seen is a tRFC outboud-queue,
    and when inbound: IDOC and Outbound: PE, the queue seen is a
    qRFC outbound-queue
    can u explain me why this>?
    but nowhere i can see inbound-queues in the MONI. means XBTI* or XBQI*...
    can u explain me why?

    Hi,
    Please see the below link
    Eo/EOIO?BE - Queue - ? - /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
    Please go through these links
    For queues in message mapping
    /people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
    Here are the Queues for Asynchronous Message Processing
    http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
    Regards
    Chilla

  • QRFC Outbound queue errors

    Hi All,
    I have some "qRFC Outbound queue errors" in the production system of R/3 and the target system is CRM.
    The status is "SYSFAIL " .
    Can anybody tell me how to solve them.
    Regards,
    Anindya

    HI Anindya,
    It's a very simple error. You have to check with your Security System Administrator if the user has included in your profile the authorization object S_RFCACL. Before this you have to define RFC Trusted / Trusting Systems in your Landscape.
    Reward Points if helpful
    Cheers
    Manohar

  • Why XBTO* is visible in inbound queues monitor if it is an outbound queue

    Hi all,
    why XBTO* is visible in inbound queues monitor if it is an outbound queue?
    Any help will be really appreciated.
    Regards,
    Ivá

    Similar question...
    XBTO and XBTS Queues

  • QRFC outbound queue

    Hello all,
    In the outbound queue of a R3/ECC system, I find messages with status as "Message edited in the target system".
    What could be reason for this and what is the work around to solve this problem ?

    Hi,
    Did you get resolutoin to your problem here?  We have BI queues in ECC which have been running just fine for over a year now and out of no where this just started happening to one of our LO extraction processes in ECC.  We have raised our issue to SAP but at this point can not find any notes pertaining to this type of message being in a ECC outbound queue for BI.
    thanks

  • Qrfc Monitor

    Hi All,
    when activating the integration models i receive the message Outbound Queue blocked in a dialog box , In the dialog box i have three options 1. Qrfc monitor , 2. Ignore and 3. Cancel. when i click qrfc monitor , i can see a status SYSFAIL.
    how I can i proceed with issue now , how can i release the block in the queue,
    becoz whenever i activate any of the integration model , I receive the same error
    Outbound Queue blocked in a dialog box .
    Thanks
    Shan

    Hi Shan,
    In SMQ1 (Outbound Queue Manager) put in the appropriate Queue Destination and Execute F8. This takes you to next screen - where all the stuck queues/blocks are listed. You need to select each and either double-click on the queue name of press F7 (Display Selection) which takes you to next screen.
    This screen shows more details of the queue. You can try selecting the queue block and click on the Matchstick icon F6 (Activate Queue). If there are multiple entires in the queue block then you can doubleclick on the queue name or F7 to list the inidividual queues. Select the queue which says SYSFAIL and try fixing the root cause before you select the queue and press F6 - Execute LUW. Please note unless you have fixed the root cause of the queue you can not process it. It will continue to give you the error.
    Also when you are trying to activate the integration model and getting the error - try selecting the Ignore option and see what happens. Sometimes the stuck queue is for something else than what you are trying to transfer and system by design flags it when you do the integration model activation.
    Hope this helps. Do provide further details like the type of queue stuck, the integration model you are trying to activate if you continue having the problem. Screenshots are preferable - but then not sure how you can put them here.
    Thanks,
    Somnath

  • SMQ1 outbound queue

    Hi Experts,
    Could you please let me know the purpose of SMQ1 and SMQ2.
    Because when i saw the transaction SMQ1 i am able to see even the queues for
    0FI_GL_6
    0FI_GL_7
    1_CO_PA333ZPAC4.
    But when i saw the transaction LBWQ it only contains the Logistics related extract structures.i am aware of LBWQ where the user postings will be saved here with the help of VI Update.
    Regards,
    Sunil Kumar.B

    Hi,
    SMQ1 and SMQ2 is used to view the Outbound and Inbound Queue :-
    SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
    SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
    You can get more help from following link :-
    http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
    Navesh

  • QRFC monitor activate scheduler

    Hi
    Can anyone explain me the use of qRFC monitor in R/3 system,what is the use of activate scheduler in qRFC monitor?
    and if  i do that what effect it will have on tRFC queue ?
    Sonal...

    Hello Sonal,
    The Qout sheduler is fot outbound queue. The activation is required for
    any blocked queues. Please refer to following help urls to gain further insight.
    http://help.sap.com/saphelp_nw04/helpdata/en/15/0eff40e39ba854e10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/4c/cf5c3c3b067331e10000000a114084/content.htm
    Hope this helps.
    Regards,
    Asit Ramteke

Maybe you are looking for

  • Solaris 2.6 time and date

    I would like to know how the kernel derives the time and date in solaris 2.6 on an 8 cpu enterprise 4500 and if it is possible to get an incorrect time from a replaced cpu board or does it only reference the TOD on the NVRAM.

  • Ftp server

    hello could you tell me the ftp server adress of bea's?

  • Working with RAW Files and JPG

    I have a high end digital camera that takes pictures in RAW format as well as JPG format. When I import the photos, it only imports the JPG format. Is there a way to import RAW photo's into iPhoto?

  • Eliminating a blank row

    how can i avoid a blank row returned by a query with max function eg SELECT max(decode(item,1,'Y','N')) from item_master - - - - - - -

  • Setup Assitant won't come up

    I just got an iPod and plugged it into my computer. The iPod screen gave me the "Do not disconnect" sign, but my computer did nothing. The instuctions that came with the iPod say a Setup Assitant should come on, but it didn't happen. After a while of