QRFC Outbound queue errors
Hi All,
I have some "qRFC Outbound queue errors" in the production system of R/3 and the target system is CRM.
The status is "SYSFAIL " .
Can anybody tell me how to solve them.
Regards,
Anindya
HI Anindya,
It's a very simple error. You have to check with your Security System Administrator if the user has included in your profile the authorization object S_RFCACL. Before this you have to define RFC Trusted / Trusting Systems in your Landscape.
Reward Points if helpful
Cheers
Manohar
Similar Messages
-
Monitoring qRFC outbound queues
Hi,
I need a CCMS monitor on qRFC outbound queues (tcode SMQ1), so that I get notified whenever messages gets stuck for some reason.
I tried with MTE class "CCMS_qRFC_Outbound_Queues_Summary", but it stays green, even after several messages are not processed in the outbound queue.
Does anyone have experience with this?Read SAP Note 441269 - Setting up tRFC/qRFC monitoring in the alert monitor
That should put you in the right direction.
Regards
Juan -
Dear Experts,
We are getting following error when we start activation from transaction /CFM2
Outbound Queue Blocked
System: CAQCLNT001 User: SAP_ADMIN 05.02.2010 10:33:1
Function/Q/SAPAPO/CIF_PROD_INBOUND
Text: Logical system CCQCLNT224 has not been assigned
How can we fix it,
Best Regards
Edited by: Wilian Segatto on Feb 5, 2010 8:04 AMThis error is because logical system is not assigned to Business system group.
First ensure that you are using correct logical system name while creation and activation of integration model.
If it is correct go to path SPRO-integration with sap components- Integration via core interface-Assign logical system and queue type assign this logical system to proper buisness system group.
Hope this helps.
Santosh -
Hello all,
In the outbound queue of a R3/ECC system, I find messages with status as "Message edited in the target system".
What could be reason for this and what is the work around to solve this problem ?Hi,
Did you get resolutoin to your problem here? We have BI queues in ECC which have been running just fine for over a year now and out of no where this just started happening to one of our LO extraction processes in ECC. We have raised our issue to SAP but at this point can not find any notes pertaining to this type of message being in a ECC outbound queue for BI.
thanks -
SYSFAIL in qRFC Outbound Queues - You are not authorized to logon
Dear Guru's,
I am new to BASIS. During health check for my company, I came across T-Code SMQ1 and found many Queue Status "SYSFAIL". Error message "You are not authorized to logon to the target system (error code 0)".
The souce system:
SAP 7.0
Component: CRM 5.0
DB : MSSQL 7.0
Kernel: 700
The target system:
SAP 7.0
Component: SAP ECC 6.0
DB : MSSQL 7.0
Kernel: 700
Firstly,
1. I login to CRM Quality Assurance Client 600. Execute SMQ1. Enter the Queue Name. Below is what I found.
http://img.photobucket.com/albums/v347/albumster/SAP/001-SMQ1-SYSFAIL.jpg
2. Once I Choose the row, I found the below error.
http://img.photobucket.com/albums/v347/albumster/SAP/002-SMQ1-NotAuthorized.jpg
3. I thought its an authorization issue so enter T-Code PFCG and added user COLACOM to Role Z_TRUSTED_RFC and do a user comparison. To my surprise, He was already given the authorization before!
http://img.photobucket.com/albums/v347/albumster/SAP/003-SMQ1-GivenAuth.jpg
Please advise.
If you need more information, please let me which T-Code to use so I can capture a print screen.
Thank You,
JackyOk you need the folowing options in your word document:
1 .Start Word without any EWA.
2. Menu Extras=>Makro=>Security
2.1 Register "security level"=> the last or 2nd last radiobutton
2.2 The other Register = Set Checkbox "...Visual Basic Project ..." =true.
Then it should be work...
/greetings nico
Edited by: Nico Effenberger on Jan 28, 2009 5:15 PM -
Hi,
My scenarion is File-> XI -> iDoc. After the logical routing is complete I am getting the following message
"Leave pipeline processing after LR because of receiver-wise queueing"
And the XML message is put in status 12 = "scheduled for output processing"
Any clues why ?
Regards
SatinderHi,
Thanks for your responses. I have a problem in XI inbound queues. File adapter is picking up the file of size 373 KB. The message was scheduled for processing. When I check in trace I am getting the above error. After some time message fails. When I chunk the file into two, Interface is running successfully. I am facing this error only for this interface. For another interface which is similar scenario I am able to send 48 MB file successfully.
Any thoughts where could have been the problem.
Thanks,
Yoganand
Edited by: Yoganand Agnihotram on Dec 11, 2009 10:17 PM -
in SXMB moni entries,
when the message is
for example inbound: IDOC and outbound: AENGINE, the queue seen is a tRFC outboud-queue,
and when inbound: IDOC and Outbound: PE, the queue seen is a
qRFC outbound-queue
can u explain me why this>?
but nowhere i can see inbound-queues in the MONI. means XBTI* or XBQI*...
can u explain me why?Hi,
Please see the below link
Eo/EOIO?BE - Queue - ? - /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Please go through these links
For queues in message mapping
/people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
Here are the Queues for Asynchronous Message Processing
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
Regards
Chilla -
Hi Guys
When I create or modify a customer in CRM to ERP is not replicated, in the outbound queue indicates CRM SYSFAIL error that says:" Gruping is not assigned and account group in IS-M".
Please help my!
Thank you
winstonHello Winson,
Please check wether you have note 1294123 appied.
If the problem happens although the note is applied in your system, please creat SAP customer message to report this error.
Thanks and regards,
Maggie -
Error in Outbound Queue while Releasing order from CRM to ECC
Hi,
When I release my sales order from CRM to ECC, I got an error in Outbound Queue saying "Screen output without Connection to User".
This is occuring in FM : BAPI_SALESDOCU_PROXY_UPLOAD
Can you please tell me why this error is coming?
Thanks,
SandeepHello Sandeep,
During the RFC call from CRM to ECC, this is a background processing, the screen call is not allowed.
If a call screen is executed, there is the mentioned error.
Please check in your ECC system, whether you have any user exits that have the coding 'call screen'.
Best regards,
Maggie -
Error in outbound queue. Packed field contains incorrect BCD format
Hi,
Can anyone please help me with this.
In the outbound queue of CRM, the queues are stuck up in SYSFAIL state.
The error is ' Packed field contains incorrect BCD format.'
Can anyone suggest what this could mean?
Regards,
PratimaHi Pratima,
In the CRM Server, the structure has more fields than in the R/3 System. Fields BAPISDIT-TAX_AMOUNT, BAPISDIT-CR_EXCHRAT_V and BAPISDIT-EXCHRATEST_V have data type 'DEC' and do not exist in the R/3 System. During the initial download, the fields receive the value '020202...' and cause the termination "The packed field does not contain a correct BCD format" in function module CRM_SALESDOC_MAP_BAPI2MBDOC.
Use Transaction SE11 to add the following fields at the end of structure BAPISDIT in the R/3 System:
PLANDLVSCH PLAVO CHAR 4
SEQUENCENO CHAR35 CHAR 35
CREDPRIC UMREFF FLTP 16
PAY_GUARAN CHAR2 CHAR 2
GURANTEED UMREFF FLTP 16
CFOP_CODE CHAR5 CHAR 5
TAXLAWICMS CHAR3 CHAR 3
TAXLAWIPI CHAR3 CHAR 3
SD_TAXCODE CHAR2 CHAR 2
VALCONTRNR CHAR10 CHAR 10
VALCONTRIT POSNV NUMC 6 *
ASSORT_MOD W_SORTK CHAR 18 *
VALSPECSTO KZBWS CHAR 1
MATGRHIE1 CHAR18 CHAR 18
MATGRHIE2 CHAR18 CHAR 18
PROMOTION KNUMA_PI CHAR 10 *
SALES_DEAL KNUMA_AG CHAR 10 *
FLGLEADUNI CHAR1 CHAR 1
FREE_GOODS CHAR1 CHAR 1
VALID_OBJ TECHS CHAR 12
TAX_AMOUNT BAPICUREXT DEC 28
MRP_AREA BERID CHAR 10
CUST_MAT35 CHAR35 CHAR 35
CR_EXCHRTV STCUR_AP DEC 9
EXCHRATSTV STCUR_AP DEC 9
or Implement SAP Note: 498317.
Thanks -
About qRFC Monitor (outbound queue)
Hi Experts,
we are upgrading the r/3 system from 4.6 to 4.7 and i am responsible for BW activities, i was asked to take care of the outbound queue what does that mean? and what needs to be done with this queue during r/3 upgrade? and there are some queues(in SMQ1) with destination None and entries 1 what are those???
Does any one have the check list what needs to be done on the BW side during R/3 upgrade?
Thanks in Advance.all the guides can be found on sapnet
https://www010.sap-ag.de/instguides
the particular guide for your particular upgrade is THE place to look for help. it's very detailed w/ links to all the oss notes you need to review as well. -
QRFC Monitor (Outbound queue)
Hello friends,
I have to delete and fill up the setup tables for the application 18. I have successfully deleted the data from the setup tables in LBWG. But when I am going to delete the entries in extraction queue(LBWQ), I find two queus for application 18. They are MCEX18 & MCEX18_1. Could you pls let me know the reason for the 2 entries. Should I delete both? Same is the case for allication 17.
Thanks in advance.
VishwaHi,
The entries in LBWQ are those which have only been captured in outbound queues and have not reached RSA7. It is absolutely normal for them to have destination as NONE.
Go to SMQ1, and execute, there you would find multiple entries for application 18
e.g.
Queue Name Destination Entries
BWXXX2LIS_18_I0NOTIF BWCLNTXXX 100
BWXXX2LIS_18_I0TASK BWCLNTXXX 200
MCEX18 NONE 2000
The first two entries here are the ones which have already been processed from outbound queue to RSA7. Therefore now they have destination as BW system.
Please check if here you get entries for 2 different BW systems. This may be the reason for 2 entries MCEX18 and MCEX18_1 in LBWQ. -
Middleware problem -Outbound queue is stuck in SAP R/3 system with message
Hi Middleware gurus ,
We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message STOP .
There are two queues generated in SAP R/3 system with names MASS_CRM_CUSTOME and R3AD_CUSTOME . The status for both the queues is STOP and when go for details it mentions sapsuck ..SAPMSSY1 -Message no. SR 053.
Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
We really dont as to why the Initial load worked fine with 2 BPs and later when want to do more BP Initial Load the Outbound queue is getting stuck
Also , by unlocking the 2nd queue R3AD_CUSTOME we are able to release it , but the first queue MASS_CRM_CUSTOME* is stuck
Please help us urgently
Regards
Dinesh and Ritvij
Email : [email protected]
Mobile -+91=9704933315Hi Praveen and other Middleware gurus,
We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
An RFC link is not maintained in the Middleware
Message no. CRM_BUPA_MAPPING051
We have set the RFC link , but still the problem continues!!!
Please help further..
Regards
Dinesh and Ritvij -
Gerneric Datasources and Outbound Queue
Dear Experts,
I've got some generic Datasources (Delta and Full Update) that work properly with productive BW-System.
Now I'm starting to build up an developement system (wrong order I know) and want to load data using the mentioned Datasources from time to time to get relevant data for testing.
Problem now is, that the generic delta Datasources fail accourding to doublicate keys (loading to dev-system) although in the basic tables for these datasources no doublicate keys are existing (or even are possible due to the table key).
I realized in smq1, that every time when data is transfered to productive BW-System, the counter to the queue for dev-System is incremented. When I delete all the entries in smq1 all the updates for dev-System work fine.
In one of the threads here I read, that generic Datasources do not have outbound queues. (Re: Generic Data Source issue).
So is there any way to turn of the outbound queues for specific (generic) Datasources? I do not want to turn them of in general as we use standard delta Datasources for Controlling.
Or how is the "normal" way to transfer data to a dev-System?
(One more information: productive system is 3.5; dev-system is 7.1.)
Thank you in advance
Kind regards
Philip
Edited by: Philip Munz on Nov 17, 2009 8:50 AMok,
after some days of searching and reading I now understand my problem.
For all, who face the same problems in understanding delta-updates, qrfc, rsa7 and so on, please have a look at
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417800)ID0216771750DB11245246034303112354End?rid=/library/uuid/40427814-376a-2c10-5589-bc1aaa6692c3&overridelayout=true
again thanks for the help
kind regards
Philip -
Outbound Queue stacking up for old destination
Hi Gurus,
I am implementing APO in a client and since the native integration (CIF) uses the same RFC structure as BW I need to keep an eye on BW processes as well.
The problem here is that they´ve migrated to BW7, killing the old 3.5 but leaving the logical system registered.
Now what is happening is that I found >4million queues in SMQ1 to this nowhere destination, which kills my CIF performance.
We´ve started to clean this garbage but the stack keeps adding up from regular goods movement transactions. The BASIS and BW team is not helping much so:
I need to find where I set the relationship between theses transactions and the destination so it does not go to the outbound queue.
thanks for the help!Hi Anand,
Please go to SMQ1 and in qname enter cf* and then execute.
In the error screen press F8 and then select all PPM related queues and delete.
After that run IM after correction and do run CCR report for the reconcilation by tcode :/SAPAPO/CCR .
Manish
Maybe you are looking for
-
Mail unexpectedly quits following electrical outage/improper shutdown
Following a brief electrical outage in which my iMac improperly shutdown, Mail has repeatedly crashed. The crash seems to happen immediately following MobileMe synchronization. After the initial crash, I ran Disk Utility to repair permissions and re-
-
Apparently my card is about to expire
November 2010. It wants a new card. I better do this quickly I only have well over a year! Seriously though, what does one do?
-
How to disable html tags in richtext editor
Hi All, I want to disable the html tags in rich text editor.I am able to disable the all components using the following code af:richTextEditor id="rte2" toolboxLayout="spellcheck"/> <f:facet name="spellcheck"> <af:commandLink id="chek" text="Check Sp
-
I faced this problem: i developed server and client midlet. Trying to connect to server, but nothing happens. I mean mobile phone shows that someone connected to it, but server does not unblock method acceptAndOpen(). Looks like i connect to phone no
-
Reversal of workflow for invoice
Hi gurus, Can we able to reset the workflow for invoices which have already been approved by the VO, but not approved by AO? With regards, Arun.