QS1 MasterCard to QS MasterCard product change approved! Follow up questions for all.

My co-worker called in and requested a product change from QS1 to QS MasterCard with no annual fee after having the card for little over a month. My question is will the refund a portion of the annual fee and do you think they will make this card a World MasterCard? Her credit line is currently $3K.

jaylau17 wrote:
sjt wrote:
jaylau17 wrote:
fomuscles wrote:
I dont think the QS comes in a world mastercardActually, it can, but they are rare! I have one!
In answer to the OP's other question, it will likely not be a World MasterCard. Capital One's frontline CSRs typically do not perform upgrades to the WMC version (although, once in awhile they will, usually if the limit is over $5000). Often to get the World MasterCard upgrade on your QS MasterCard, you will have to contact the EO like I did. Actually my co-worker called this a number and spoke with an Account Manager who then transfered her to another department. The person she spoke with put in the request and it was approved for a reular QS. She did not think to ask for a WMC or a cli. I did read in another post that folks were upgraded to a WEMC from a Platinum MC with cl as low as $2K, so shes hoping for a WMC or a WEMC. I think you misread my post. I never claimed that frontline customer service doesn't do upgrades from QS1's to QS's (in fact, MY upgrade to a QS MC originally was from a frontline CSR!) I stated specifically that frontline CSRs are not normally the ones who process the upgrades from QS MCs to QS World MCs (although once in awhile they do). However, myFICOers have had A LOT more success with the EO for this particular upgrade, as the frontline CSRs are usually powerless here.I understood what you were saying, I was just pointing out that my co-worker spoke with an Account Manager wh then transfered her to another department.

Similar Messages

How to change the UWL refresh rate for all portal users.

Hi Portal Experts,
How to change the UWL refresh rate for all portal users?
Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
It was defaultically set to 5 mins for all users.How to change this to 20 mins.
Thanks
Sony.

1.      Launch the UWL iView configuration page.
You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
      From the Universal Worklist Systems, choose the system for which you want to edit the properties.
    Choose Edit.
may be you can get clear help from below help file
http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
regards
nagaraju

HI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean lan

Daniel SterchiHI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean language interface to english language interface at indesigncc download. so i wonder How i can do that?...i am very seriuos for now....i want indesigncc version for Eng.Language interface. but now i cant do that .i dont konw how i can presented kor. interfacing transite to eng. interface..
forumnotifierHI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean language interface to english language interface at indesigncc download. so i wonder How i can do that?...i am very seriuos for now....i want indesigncc version for Eng.Language interface. but now i cant do that .i dont konw how i can presented kor. interfacing transite to eng. interface..

First of all, uninstall it with the uninstaller.
Then:
Install the ENGLISH version.
Change the language in the CC app to Korean.
Install the Korean version. (DON't uninstall the English version)
Change back the langauge in the CC app to English.
When your OS is running in English, InDesign will run in English with Korean functionality added, if your OS is running in Korean it will take the Korean User Interface, so let your OS run in English.
Every installer language will add needed plugins for the work with that language. E.g. If I install Hebrew, I get RTL functionality in German version, only if I would change the OS language it would change the language of InDesign, InDesign takes always as UI language the language of the OS if available, if not (in your case you have uninstalled English before), it takes any version which is available in the order of languages specified in the OS.
If you need to run your program in a different language than the OS but you have installed it in the language of the OS it becomes more difficult. You would have to use some system tools which are able to force a program to open with a different language. Most of those tools are freeware.

Any Way to Change Thickness of Connector Lines for all lines of a Chart?

Post Author: ScottL
CA Forum: Charts and Graphs
Hi All,
I am trying to change the thickness of a Chart's Connector Lines for all lines of a chart and cannot find a way to accomplish this. I can go into Report Preview and individually change the thickness one at a time, but what if I do not know how many lines I will have (as in a Line Chart) ? I can't find a way to do this through Crystal Reports XI.
Many thanks in advance!
Scott

I think it's even easier to just match frame the "source file"... put your playhead on the clip you want to speed change in your sequence. Then type optioncmdf. Perform the speed change in the Viewer, then simply cut it in... Might help to put it up above the older, use the double arrow selection tool facing right to move the clips past this change later... pull the upper track speed changed clip down over the old, and viola.
Gotta say though, it's a lot easier to perform the speed change in the Viewer, and edit it all in as you go rather than doing it after you've put the clip in a sequence. (not always possible to determine what the speed change should be maybe, but sure easier.... FCP 7 handles this problem a lot better for sure, and worth the upgrade price if your machine is compatible.
Jerry

Changing file clicking default behaviour for all users

Is there a way to change the default file clicking behaviour for all users? Each user can do it himself by going via the username menu ("Personal Preferences", "When clicking on a file...") but I would prefer to set it for all users to a value that is different from the default.

Hi Ganesh,
Can u pl post how you solved this.
Regards,
Reema.

Changing shared variable reference modes for all nodes in application. Shortcut?

I have a large application which makes extensive use of both network-published and single-process shared variables. I want to change the reference mode of every such node in the application from absolute to target-relative. Is there any way to do this without having to open every subVI in the application and use the right-click menu on every node?
Sean

I don't know of any shortcut, but if you want to change the reference node of everything in the application you could probably script it. I was thinking something similar to what I have below where you traverse the BD of a specific VI for all SharedVariableNodes and change the relative mode to Target Relative.
Depending on how your project is organized you can add some additional functionality before the open VI reference to go through and open the reference of every VI in your project.
Matt J
Professional Googler and Kudo Addict
National Instruments

Random Number being changed to the same number for all rows

hello all,
first of all I want to mention that this problem start happening after 2.14 instalation of Power Query.
I'm creating new column in my query and setting all values to random numbers. The problem is that next step (doesn't matter what it do itself) somehow changes all those random numbers to the same random number for all lines.
here's code sample:
InsertedCustom = Table.AddColumn(RemovedColumns3, "Random Number", each Number.Random()),
InsertedCustom2 = Table.AddColumn(InsertedCustom, "Analyst Full Name", each [Analyst First Name]&" "&[Analyst Last Name]),
when I'm checking step by step, InsertedCustom creates new column and all values are being set randomly for all lines BUT when going to the next step (InsertedCustom2) all values in the column "Random Number" are being changed to the
same number (no matter that InsertedCustom2 itself should not be doing anything to column named "Random Number") . I even tried moving InsertedCustom step to the bottom of my code but it didn't help and still facing this issue.
p.s. updated my PQ to 2.15 - didn't help

This is a known issue. Power Query assumes that functions are idempotent (given the same arguments, they produce the same result), which isn't true for Number.Random. Our optimization pipeline is turning Number.Random() into a constant in the scenario you
encountered, which results in all rows having the same value.
There's been some discussion of how to fix this, but that won't help you in the near term. Can you describe a bit more about your scenario and what you're trying to accomplish? Perhaps we can help you find a workaround.
Ehren

Change the Releated Integration Server for all Business Systems

Hello,
follow Scenario:
We export the SLD entries from a Development System in a file.
Now we want to import the Entries in our Prod.-System, and we
have to assign (or change) to other Related Integration Server.
e.g. the esported Business System has in Development the
Related Integration Server D12, but in the Productive System we
need P12.
Is there a other possibility as to change first things first.
Thanks for your help.

Hi Stephan,
I think this is not the correct approach because development and productive systems are different. You must register your technical systems by means of RZ70 transactions. If you have two different landscapes (DEV, PROD) you must register on two SLD servers.
Doc about SLD: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b09fe69e-46be-2a10-9fb0-9c11aeaa3557

Changing font and background color for all components

Hi,
This is my first time writing a GUI, and I'm pretty new to Swing and Java. I just recently switched from C++, and so far Java seems to be doing a nice job =)
Currently I have a gazilion components (textfields, labels, panels) and I'm wondering if there is a way to change their background/foreground colours without adding in setBackground/setForeground for every single component.
I've done some researching onto using Look and Feel, but there aren't any current ones that suits my needs. And everyone seems to mention that programming your own is pretty complicated.
My boss wants a slick white text on black background interface, so you can imagine that he's not very impressed with the current default greyish colours =)
Thank you for any help!
Cindy

Hi Cindy,
I'm not sure how effective a solution this will be, but you could try:UIManager.put("TextField.background", Color.BLACK); // Default text field background becomes blackThere are many more defaults you'd have to change and could probably achieve it more reliably and simply by creating or editing the properties file that controls the way the look and feel (even if it's the default) is implemented. Take a look at:
http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/UIManager.htmlHope this is helpful
Chris.

How do i change the wmode to GPU for all flash?

I was having lag issues for weeks now.. I started fiddling on the settings with a script called youtube center, I changed the wmode to GPU and the lag issues went away completely. The problem is... i need to do this to every flash video sites beause sites like twitch.tv still lag. Is there a way to change the default wmode to GPU?

Try disabling hardware acceleration or updating your video drivers to see if that helps.
How do I disable or enable hardware acceleration?

Why does placing links in Illustrator now change the "Date Modified" data for all of my files?

This seems to be a new glitch that started after I installed the latest updates to Illustrator CC (2014) and reoccurs every time on both computers I work on:
When I choose to place a new image in my Illustrator file and the window opens to let me choose a file to place, the "Date Modified" field of all the files in the folder I'm viewing (except other Illustrator files) quickly changes to the current date and time. This is definitely happening when I'm in Illustrator because when I needed files from a folder that had hundreds of images in it and I was able to select a file quickly, I was able to do so before it had changed the date on all of my files. However, when I needed a file from a folder that had hundreds of images in it but I took a long time to find the image I needed, Illustrator had time to change the date modified on all of my files. This might seem like an unimportant issue because it doesn't actually seem to modify or damage any of my files, but having all of the dates change on my files is a serious problem for my workflow and file management issues. So far, my only work around has been to use back-up image files, but that's not a long term solution and I don't understand why Illustrator should be modifying the dates of my files.
Is there a setting I can choose somewhere to prevent this problem? If not, is there somewhere I can report this kind of glitch? I'm not sure if I'm using the exact language necessary to get the issue across so please let me know if you have any questions! Thanks!

iCloud is not compatible with Snow Leopard, that is your problem.
A quick way out is to purchase Soho Organizer which is compatible, even when running on Snow Leopard, it will correctly handle Contacts and Calendars from iCloud. $100, 2 user license.
Soho Organizer
There is a free trial if you want to try it.

How to change the java cup icon for all the JFrames?

Hi,
I would like to know if I can change the Java cup defult icon that appears in the upper left corner of the JFrames in one time, instead of setting the JFrame's icon in every created JFrame.
Regards,
Gabriel

Then don't set the parent to null. If you don't want a parent, just set it to
JOptionPane.showMessage(new IconFrame(), ...
[\code]
where IconFrame extends JFrame and sets the icon in it's constructor. The optionpane will then use the icon from it's parent frame.

How do I change the owner's name for all Apple/iTunes/iCloud applications?

The name for my iPhone device and all Apple related things I log into, the owner name is my father's name -- however, since it is my device and my phone and I use all relating applications, I would like for it to be underneath my name. How do I change the overall name for my entire Apple account?

Go to system preferences and the sharing tab, then change the "computer name".
That's not a problem for anything.
If you had links from the other computer in the name.local format, you'll just need to update them.

Change Smart View default colours for all clients

I need to change Smart View default colours. But it must be done in a centralized way, so I can not set it up at the client level. I'm not sure if Smart View takes defaults from planning.css styles, or if they're defined somehow at the provider, or maybe specified in client installer.
Thank you in advance for any guidance on this.
SD

SD,
You may want to work with Oracle SmartView Support, to see if / how it is possible for SmartView, using a Service Request.
Thanks!

Changing the default keyboard language for all users via command line

I have about 250 computers, that I set the wrong default language on.
I am hoping someone here can help me. I have 3 keyboard languages installed in my labs,
En-English (United States)
Fr-French (Canada)
En-English (Canada)
I'd like to make the Fr-French (Canada) the default keyboard language for all users that login I have tried the following xml but it's not working. I do not see the problem any help would be appreciated.
I tried to run it by doing this
control intl.cpl,, /f:"FR-DefaultKeyboard.xml"
The following code below is called FR-DefaultKeyboard.xml file.
<gs:GlobalizationServices xmlns:gs="urn:longhornGlobalizationUnattend">

<gs:UserList>
<gs:User UserID="Current"/>
</gs:UserList>

<gs:UserLocale>
<gs:Locale Name="FR-CA" SetAsCurrent="true"/>
</gs:UserLocale>
</gs:GlobalizationServices>

<gs:GlobalizationServices xmlns:gs="urn:longhornGlobalizationUnattend">
<gs:UserList>
<gs:User UserID="Current" CopySettingsToDefaultUserAcct="true" CopySettingsToSystemAcct="true"/>
</gs:UserList>
<gs:InputPreferences>

<gs:InputLanguageID Action="add" ID="0409:00000409" Default="false"/>

<gs:InputLanguageID Action="add" ID="0c0c:00000c0c" Default="true"/>

<gs:InputLanguageID Action="add" ID="1009:00001009" Default="false"/>
</gs:InputPreferences>
</gs:GlobalizationServices>
This worked, thank you

QS1 MasterCard to QS MasterCard product change approved! Follow up questions for all.

Similar Messages

Maybe you are looking for