QT 7.03 still no go

I was hoping that QT 7.03 would solve the problems introduced in version 7.02. So far all the problems (stuttering H264 and DivX playback, frameskips of more than 10 sec.) still persist. This is rather disappointing and makes me believe that Apple should have an eye on quality assurance before releasing an update.
I removed any 3rd party plugins while testing and the playback of H264 movie clips is still incredibly choppy (example: bbc-africa_m480p.mov from the QT site plays correctly till sec 6 then freezes and continues at sec 17). This is ridiculous. Playback of DivX clips using the DivX6 component that comes with Toast7 is also incredibly jumpy.
(Mac mini 1.25GHz / Powerbook 17" 1.33GHz / Mac OSX 10.4.2)
Only way is going back to version 7.01 which works flawlessly.

Sorry to say dude, but I've talked to apple, and they're useless. They told me to look on the website, but the people at the technical service counter couldn't give me any answers to my sound problem. He also couldn't explain we he himself was getting an error message any time he tried to play a mpeg 2 file. Best of luck.

Similar Messages

HT203164 help! i am using itunes 10.6.1.7 and windows vista 64. itunes will no longer burn cds. i have searched online and tried all i saw that could possibly fix it and it is still not working.

i have tried:
reloading itunes
unchecking 'write'
removing lower filters in regedit
ensuring i had the correct 'gear' info in the upper filters in regedit
removing 'gear' from regedit, system32
reloading updated version of 'gear'
cleaning my registery
deleting itunes
cleaning registry again
reloading itunes
cleaning registry again
i still cannot burn cd. t i can import and play cds in itunes and i can watch dvds. itunes will just not burn to blank cds, and i have tried sever new blank cds, each is not recognized.
i do not know what else to do, i have searched the internet and whatever i saw doable i tried.
when i check the cd drive in itunes i had gotten a 4220 error, cnet advised to download a free error fixer, however, this error fixer gave me and enduser message, so that didn't work.
the diagnostic for the cd burner read that i had to put in a formatted disc with content so i did and there are the results of that were that it read the cd and that the 4220 errir code was encountered last time there was an attempt to burn.
and 'could not open cd handler 32. there is a problem with the installation of the drive in windows or the drive contains a copyprotected cd.
the above is not the case as it also popped up for me to import cd to itunes.
i tried to copy and past the entire contents here but it would not allow me to paste.
please help!

I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

Index with "or" clause (BUG still exists?)

The change log for 2.3.10 mentions "Fixed a bug that caused incorrect query plans to be generated for predicates that used the "or" operator in conjunction with indexes [#15328]."
But looks like the Bug still exists.
I am listing the steps to-repro. Let me know if i have missed something (or if the bug needs to be fixed)
DATA
dbxml> openContainer test.dbxml
dbxml> getDocuments
2 documents found
dbxml> print
<node><value>a</value></node>
<node><value>b</value></node>
INDEX (just one string equality index on node "value")
dbxml> listIndexes
Index: unique-node-metadata-equality-string for node {http://www.sleepycat.com/2002/dbxml}:name
Index: node-element-equality-string for node {}:value
2 indexes found.
QUERY
setVerbose 2 2
preload test.dbxml
query 'let $temp := fn:compare("test", "test") = 0
let $results := for $i in collection("test.dbxml")
where ($temp or $i/node[value = ("a")])
return $i
return <out>{$temp}{$results}</out>'
When $temp is true i expected the result set to contain both the records, but that was not the case with the index. It works well when there is no index!
Result WITH INDEX
dbxml> print
<out>true<node><value>a</value></node></out>
Result WITHOUT INDEX
dbxml> print
<out>true<node><value>a</value></node><node><value>b</value></node></out>

Hi Vijay,
This is a completely different bug, relating to predicate expressions that do not examine nodes. Please try the following patch, to see if it fixes this bug for you:
--- dbxml-2.3.10-original/dbxml/src/dbxml/optimizer/QueryPlanGenerator.cpp     2007-04-18 10:05:24.000000000 +0100
+++ dbxml-2.3.10/dbxml/src/dbxml/optimizer/QueryPlanGenerator.cpp     2007-08-08 11:32:10.000000000 +0100
@@ -1566,11 +1572,12 @@
     else if(name == Or::name) {
          UnionQP *unionOp = new (&memMgr_) UnionQP(&memMgr_);
+          result.operation = unionOp;
          for(VectorOfASTNodes::iterator i = args.begin(); i != args.end(); ++i) {
               PathResult ret = generate(*i, ids);
               unionOp->addArg(ret.operation);
+               if(ret.operation == 0) result.operation = 0;
-          result.operation = unionOp;
     // These operators use the presence of the node arguments, not their valueJohn

I have upgraded from 3.5 to 4.1 , it downloads to the folder but still uses the 3.5

I'm getting an urgent to update on my screen so I have updated from 3.5 to 4.1 , it has down loaded to the firefox folder but still brings up the old firerfox.
I have downloaded it 3 times and rebooted around 6 times but still the same screen telling me to upgrade as the older version is not now protected.
Kind Regards
Dennis

It looks that the update wasn't successful because your "More system details" list still shows a Firefox 3.5.19 version.
If there are problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

I deleted a contact, but they still show up in my text options to send. I would like to delete the contact from my texts too.

I deleted a contact, but they still show up in my text options to send. I would like to delete the contact from my texts too.

No don't restore your iphone. I've done that several times & it has never worked. -I still have deleted contacts in my iphone texts. *However if you do restore it you will not lose all your data, pics, text messages etc if you backup in iCloud. It restores back to original phone. Very nice :). Anyhowwww....
I JUST figured it out!! :))). Remove the contact from recents.
Start a text. You should see the deleted contact. All the way to the right of the name is a symbol. The symbol is a circle with "i" in the middle. Click that symbol then in red lettering click "remove from recents".

Loops "missing" but still in library

Upon update, many loops went 'Missing" although they are in the loop library still.
Have tried several attempts to re-index loops to no avail.
For instance, "Live Edgy Drums 07" remains, but "Live Edgy Drums 29.2" does not and has no sound.
in sound effects, "Airplane Takeoff" is in the loop library and is functioning, but "is not found" in my composition.

how do i get them back into my playlist?
On the left side ofTunes, drag from Library -> Music to the playlist you want it in.
why does it keep doing this?
Are you deleting the playlists the song(s) are in?

My phone wont let me download anything even free stuff or update.it keep saying something wrong with my billing info so i fix it but still cant download.I signed out sign back in still nothing please help i'm getting angry

My phone wont let me download anything even free stuff or update.it keep saying something wrong with my billing info so i fix it but still cant download.I signed out sign back in still nothing please help i'm getting angry

If it says your billing info is wrong that means that your credit card issuer is refusing to approve your account. You will have to solve the problem with your bank or credit card company.

After delete file from documents the direct link still alive.

Hello.
I upload a image to the style libary folder, then i publish the file and delete him BUT the direct link to the image still work.
I try to upload anther image with the some name but when i try to browse the direct link i get to deleted file.
If i upload a image and delete it before i publish the file I don't have this problem.
I try to flush the blob cache with this commends:
$webApp = Get-SPWebApplication "<WebApplicationURL>"
[Microsoft.SharePoint.Publishing.PublishingCache]::FlushBlobCache($webApp)
Write-Host "Flushed the BLOB cache for:" $webAppbut this doesn't work.I clear the cache on the local pc and doesn't work to..Any idea someone?Thanks!

Hi,
To check if there is cache issue, please access the url in another PC to see if the issue persists. You could also open style library in SharePoint designer to double confirm it.
In addition, if you click the ellipsis of the image item, there will be a preview panel to show the picture, is it the newly upload one?
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

When I login to my Bank's online banking, I cannot hear the conformation tone, it worked before. Site still works without this.

When logging into my Bank's on line banking, you must first enter a user Id. Then it takes you to a window where you have created a visual and "sound" password which it plays to verify that you are in the banks site. Then you enter another password and then you are in. I still can get into the site, but it's just a little strange that the sound was working and now does not. I don't know if this has anything to do with it, but I was using chrome to enter the site and it directed me to ad on needed to play the sound which had Fire Fox's name on it. I down loaded this ad on and it did not work on chrome. I don't know if this affected FF?

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open

Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open! Im very frustrated and anything would help! I have Windows 7 or Vista. Idk which

Hello Dr.Help,
Thank you for providing so much information about the issue you are experiencing with iTunes. It sounds like you have tried reinstalling it, but nothing happens when you launch it. I recommend following the steps in this article to resolve launch issues with iTunes:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Thank you for using Apple Support Communities.
Best,
Sheila M.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Pages downloaded, but I still can't open iCloud pages from iPad. Says that I need a new version of Pages on my Mac

For my Mac Pro, after I downloaded the new Mavericks OS, I downloaded the new pages. However, I still can't open iCloud pages from iPad. Says that I need a new version of Pages on my Mac.
Please help.

It appears that you are launching the old version, probably using an icon in your Dock. That icon is an alias & is not updated. You will need to go to your Applications folder & find the new Pages 5 icon & double-click it. Once it is launched, you can right-click on the icon & choose Options > keep in Dock from the contextual menu.

Cancelled invoices still appearing in AP Trial Balance report

Hi,
The invoice was cancelled during 2007 but it is still showing in the AP Trial balance and GL Trial Balance report.
May I know why? The current fix is to go the JE and fix it to zero, but this involves lot of manual work.
Please guide me to find the exact root cause.
Regards,
Muthulakshmi T.

Hi,
Please check this thread it should help you.
https://forums.oracle.com/thread/1002139
Regards,
Yuvaraj

Mail app wont open. Have tried restarting, and it still kicks me out. Can anyone help?

My mail app doesn't seem to open. It starts but then it kicks me out. I have tried restarting the device and the app but it makes no difference. Its telling me i have 2 messages but i cant get in to read them. Has anyone had this trouble before?

Close the Mail app in the Task Bar and re-launch.
Double-click the Home button to reveal Task Bar. Hold Mail app down for a second or two; tap the minus sign to close app.
If it still doesn't work, try a reset.
Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo.

My mail wont open. I even changed my cel phone and still won't open

My mail app won't open. I even changed phone and still the same

Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

QT 7.03 still no go

Similar Messages

Maybe you are looking for