QT 7.1: App itself and iTunes wont launch anymore
i have updated QT 7.xx to 7.1 on a 10.3.9 this morning. now QT and iTunes won't launch no more. there is no warning or anything, but the programm windows wont open.
HELP please.
That sounds really bizarre, but somewhat isolated...not seeing/hearing of this widespread.
Are you clicking on the app itself, or files that you wish to be associated with the app?
Do you somehow have more than one instance of QT on the same computer? or same partition--more to the point.
I would
-make sure I didn't have multiple versions on the same partition.
- check "get info" on files you think should be associated with an app...see that they still report being associated with it.
- repair permissions
If no change in behavior yet, then:
- uninstall
- reinstall and again repair permissions.
good luck
Similar Messages
-
Help App store and Itunes wont work on my ipod touch 4G with ios 5.0.1
When I open the app store or itunes store and try to search something it freezes and crashes I need help
Try resetting the iPod...
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset Network Settings.
Restart your iPod. Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
Now try the App or iTunes Store.
If you still need help try here > Can't connect to the iTunes Store -
I want to set up PASSBOOK since it was installed with os6 however when I open the app on my Iphone it show thw app store button , I tape it and I says cant connect to itunes eventhough i am connect by cable to itunes.....so I cant set up PASSBOOK any suggestions??
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Working now? If not, ask yourself what may have changed just preceding the misbehavior? Add and App? Update one? Update iOS? Anything.
Use iTunes to restore your iOS device to factory settings - Apple Support
ÇÇÇ -
i cant connect to my computer with my ipod and itunes wont connect to it either. also i have forgotten my ipod passcode
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
And if necessary
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
my ipad is connected to my wifi but the app store and itunes store never open, the internet never works and it is always loading but never working. I dont understand why as my computer works for my wifi and my brand new ipad should too.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My home button is broken ipod touch 5th generation and wont open and itunes wont recognize it
my home button is broken ipod touch 5th generation and wont open and itunes wont recognize it
Turn on without Home/Power Button
-
I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and itunes store. How do I make one password that will be recognized by all these devices? My apple id is constantly not working.
Hi Lrwill,
If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
Cheers,
GB -
My App store and itunes has disappeared from my iphone
My app store and itunes apps have disappeared from my iphone.
I suspect Apple is responsible and is trying to force an upgrade. Does anyone know if this is true? because if it is we should object to this.
The upgrade on my ipad was such a horrible experience, I don't want to do it to upgrade my iphone. (Upgrades have been a nightmare every since the itunes interface was changed. In my view, iTunes is the now one of the most unintuitive interface imaginable - [bar windows 8]. Prior to that it was generally easy to do upgrades and backups without hiccups and the interface was great. Now its too obscure to find what you need to do.)
I have been an Apple fan since the original Apple computer - but am not very happy with recent changes that affect use-ability and reliability.
General grumbling aside - every time you upgrade, you have to reload all of your apps; and a lot of favorite apps won't work with the new system. That's another reason I don't want to upgrade.
Without the App and iTunes application - you can't selectively update the apps you want to update or even access your music.
Questions:
1. Does anyone know why the Apps and iTunes apps disappeared? (I'm not the only one complaining about this.)
2. Does anyone know how to get them back without having to effectively erase your phone and start over?
3. Does anyone know how to get iTunes on the computer to recognize your iiphone when the itunes app disappeared off it?
Thank you.
DDHi Dahveed,
Thank you again for the advice. But, rebooting did not help.
In the end I was forced to upgrade.
I am relieved to say that this upgrade went very smoothly compared to other upgrades.
I did not have to re-download apps and they appear to be in their normal folders - except a new app page 2 (after the primary page) appeared containing only the missing apps. This was not there before.
Answer to the disappearing Apple App Store and iTunes Dilemma:
The answer to this problem unfortunately appears to be to upgrade the system.
In my experience the Apps (which presumably are removed to force the user into an upgrade) then re-appear.
On the positive side, at least on this occasion, it did not turn out to be a nightmare make work project. -
I would really like to download apps however this isn't possible as safari, app store and itunes are deleted from my homescreen? Where can I go about installing them to the phone again a.s.a.p??
Check Settings > General > Restrictions on Safari, iTunes, etc.
-
Can someone tell me how to restore my App Store and iTunes Apps on my iPad 2?
Can someone tell me how to restore my App Store and iTunes Apps on my ipad 2?
If you had a backup either in iTunes or iCloud of the iPad you can restore from it by following this article:
iOS: Back up and restore your iOS device with iCloud or iTunes
If not you can go into the Purchased section of the App Store App, and download your Purchased Apps from there for free. However their data will not be restored. -
How do I change credit card information for app store and itunes
I am unable to change credit card infor for my app store and itunes?
What happens when you try to change your card details ?
You should be able to change your payment details on your computer's iTunes by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link. If you are doing it on your iPhone then tap on your id in Settings > iTunes & App Store (Settings > Store on iOS 5 and below) and select 'View Apple ID' on the popup - that should also give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918
Does that not work ? -
How do I remove my old iMac from my App Store and iTunes Store accounts?
Before I sold my friend my old iMac, I used the Migration Assistant to transfer all her files from her MacBook Pro to the iMac. I then deleted all my files. My old iMac and her MacBook Pro were both upgrated to Mavericks before the Migration.
Now, she is being prompted to download and install the updates for Numbers and Pages on what used to be my iMac, but the App Store displays my account identification and asks for my password.
(1) How can I delete my old iMac from my App Store and iTunes Store accounts?
(2) How can she access the App Store and iTunes Store using her own accounts?
Thanks in advance.That isn't how to prepare a Mac to sell or give away. You should deauthorize your iTunes account on the Mac. Call Apple Care and have the Mac disassociated from your Apple ID. Then erase the Mac and install the latest version of OS X that shipped installed on the Mac using the Install DVD or OS X Recovery, depending on what version shipped on the Mac. Until you do this, the Mac, OS X and the iLife apps belong to you. She will need to buy the iWork apps for herself, using her own account. You cannot pass any apps that you bought on to her, that would be piracy.
-
I have just updated my iphone software to iOS5 and now my app store and itunes on my phone is all in japanese characters!! how do i get it back to english as i dont know how much my apps are and what buttons im pressing?!?
I have the same problem! Let me know if you manage to sort it out. My iPad did the same thing but to full restore from iTunes sorted that out. Have you tried that? No such luck with my iPhone.
-
pls. help my iPhone stuck in recovery mode and iTunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..before it was just stuck in an apple logo but when i tried recovery mode to itunes then it stuck..
Hi awison,
If your iPhone is not recognized by iTunes on your Windows computer you may want to use the steps in this article to troubleshoot -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
This may also resolve your recovery mode issue. If it does not, use the steps in this article to resolve it -
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for using Apple Support Communities.
Best,
Brett L -
I have upgrade to Ios5 English version but after the installation was complete I found that the App Store and Itune are displayed in French version.
But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.
Maybe you are looking for
-
HT201401 how to repair sound coming from receiver
please tell me how to resolve this problem?
-
Please HELP me read this file....!
I am having trouble reading the file input.dat using this code that I wrote. It compiles without errors but I get an ArrayIndexOutOfBounds Exception when i run my program. public void Read(String fileName) { try {
-
Hey, I have created a Java GUI using a few XML files (for the front end components). Then in the code, I have parsed the files to make them appear on the GUI. When I posted the GUI (test. jar) on the Internet, the browser displays "access denied" err
-
I have 2 of each of these files: iTunes preferences, iTunes library extras, iTunes library genius, iTunes library, iTunes Music library, sentinel and I have 2 folders that are named album artwork. I tried to delete one of each but then everything go
-
How to generate quadrature data
I'm using Measurement Studio 2012 Professional and need to generate a sine wave with quadrature output (idealy with a little noise thrown in). I've examined the SignalGenerator class and cannot find how to have it generate complex data. I understand