QT 7.1 Export Problem Failed(-2126)

Hi - I just got a QT 7.1 pro because I want to export my AVI files made by Canon SD550 to any files with smaller size than AVI. However it always failed after "calculating estimated time" text: "Failed -2126"
And here is the information of the format of the file :
8-bit VCM codec, Unsigned Integer, Mono, 11.024 kHz
, 320 x 240, Millions.
Any help is highly appreciated.
thanks!

You may need to download some of the Canon video codecs before you can export.
The 2126 error message is "notAllowedToSaveMovieErr" which doesn't mean that much to you.
You may also need the MPEG-2 Playback component.
Should be easy, but it isn't.

Similar Messages

Quicktime export problem - failed(10)

Hi there.
Quicktime V7.1 has suddenly stopped working on my computer. Whenever I try to export, a few seconds after it displays 'calculating time', I get the message Failed(10).
This seems to be irrespective of the format of the original video or the format and compression I attempt to export to. So far, I have only attempted Quicktime native codecs. Nor does changing the file name or exporting to a different drive help.
I have uninstalled Flip4Mac as I understand it can be troublesome and I have reinstalled Quicktime 7.1 and restarted.
No change. Same problem. Please help! Do I have to reinstall the OS?
Thanks if you can help.
Ben.

Bummer.
Double check your "Pro" status using the QuickTime Sys Prefs.
Try a different user account. This helps isolate "users" folder issues.
Don't muck with a bunch of changes unless you want to make even more troubles. Leave things as they are and report back.
Try exporting to another (new) folder on your user account Desktop.
If exporting to an external drive make sure it is recognized by Disk Utility app and is properly formatted to receive large files.
Check "permissions". DU can help there, too.

EXPORT Backup failing due to character set problem

Hi ,
The export Backup failing due to character set problem
. . exporting table ravidlx
EXP-00008: ORACLE error 6552 encountered
ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-553: character set name is not recognized
P
Please suggest how to set character set
Regards,
kk
Edited by: kk001 on Aug 29, 2011 7:22 PM

kk001 wrote:
Hi ,
The export Backup failing due to character set problem
. . exporting table ravidlx
EXP-00008: ORACLE error 6552 encountered
ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-553: character set name is not recognized
P
Please suggest how to set character set
I don't know what you have.
I don't know what you do.
I don't know what you see.
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.
do as below so we can know complete Oracle version & OS name.
Post via COPY & PASTE complete results of
SELECT * from v$version;

The Creation of Export DataSource Failed Error while transporting ODS Cube

Hi All,
I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server. But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
   Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
   The creation of the export DataSource failed
   Password logon no longer possible - too many failed attempts
   Password logon no longer possible - too many failed attempts
   Error when creating the export DataSource and dependent Objects
   Error when activating DataStore Object ZANAUTSL
I also updated the transport conversion tables but still problem not resolved.
Immediate help is hightly appreciated.
Thanx
AJ

Hi AJ,
Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
After this, your issue should get resolved.
Thanks - Pawan

Creation of export datasource failed

Hi All.
i copied a bussiness content data source object (DSO) and tried to activate it. it is giving error that
"The creation of the export DataSource failed"
Why ??? where m i going wrong.
Thanks & Regards,
Mo

Hello,
This is the problem becos the system is unable to create DATAMART for DSO object. The following reasons might be hindering the creation of DSO. Please check whether
1) You have proper authorization to create Datasource/Datamarts.
2) If so then, check whether DATAMART for the BW Self Source System is properly Installed from Business Content. (I hope you are working on the version 3.5 or later.. here we need to manually install Aplication Component related to Datamart from Business Content so that Datamart creation never fails after that)
3) Also check BW Self Source System is properly functioning.
Thanks
Kishore Kusupati
Edited by: Kishore Kumar K on Jul 28, 2008 5:35 AM

The export operation failed to create an image file

I've been experiencing bizarre behavior when attempting to export images to my Usb-connected card reader. After reading some threads on this form, I was convinced that my reader was defective. Same problem on a brand-new reader.
The specific behavior was as follows: I attempted to export roughly 150 custom-named 500 KB image files to the memory card. The last 15 or so failed to transfer and I got the message, "the export operation failed to create an image file for the versions identified below."
Trashing VP list didn't help. What did was changing the custom name. There was nothing particularly unusual about the original custom name and the new one was virtually identical. After changing the name, the export worked without a hitch.
Has anyone experienced similar behavior? Any ideas what's going on?

problem was that the NEW card reader was faulty as well. My luck!

"Build and Export Cache" fails to export 100% Previews:

"Build and Export Cache" fails to export 100% Previews:
I am moving from Bridge CS5 to CS6 and have a very large number of 100% Previews in my CS5 cache. The idea of regenerating all these 100% Previews in CS6 is NOT amusing. It is amazing that there is not a simple import function for this task as a way to make the software upgrade more "seamless"… but apparently there is not.
I have read the Adobe documents:
    "Bridge Help / Manage the cache | Adobe Bridge CS4, CS5"
    "Creative Suite / Work with the Adobe Bridge cache"
Based on these documents, in Bridge CS5 I used the export function in
Tools>Cache>Build and Export Cache…
    with "Build 100% Previews" checked
    and "Export Cache To Folders" checked.
Unfortunately, the "Build and Export Cache" fails to export 100% Previews to the target directory. They should appear in the target directory as hidden files in the format xxxxx.NEF.JPG. Yes, I do know how to view hidden files in both the Finder and in Bridge.
In Bridge CS5 I tried Purging and rebuilding the Cache for the target directory with no luck.
I tried running "Build and Export Cache" in Bridge CS6…. still no hidden Preview files in the target directory.
My settings in both CS5 & CS6 Bridge - Preferences:
    "Keep 100% Previews in Cache" is checked
    "Automatically Export Cache to Folders When Possible" is checked
My settings in both CS5 & CS6 Bridge - Options for thumbnail quality and preview generation:
    "Generate 100% Previews" is checked
Using OS X 10.6.8
Anyone have a suggestion?????

Bridge is the only piece of software I have used, which incorporates a database, where new versions do not provide for importing the objects of the older version. Very strange.
That is a very mildly conclusion but unfortunately until the cache strategy for Bridge is finally sorted out this problem will exist.
Now I have to confess that I can't use the 'Auto export cache when possible' for several versions now due to a rare problem that after the first time usage without problem created export cache almost every second time generates a warning message that due to failure it needs to replace the Cache T file, hence I deselected this option permanently.
I would think that if you have those already cached and exported files for 100 % preview in the dedicated folders it would read those files and add it to the database and central cache file when having pointed Bridge to that folder, but I'm far from sure about that.
Also after rereading your first post you state to expect the build and export cache to build also hidden files with the two extensions from original filetype followed by .jpg from cache in the folder itself (target directory)? Here I'm a bit lost. The mentioned double extension files only appear in the central cache folder and are visible but buried in the subfolders for each quality in the central cache file at user library (default) or custom set location in Bridge prefs.
The exported cache to folder are hidden files and as long as I can remember that where 2 files already in the File browser (forgot the extension they used for this) and currently .BridgeCache (very small, few KB) and the for me problematic .BridgeCacheT file that can grow very large and has about the same size as the subfolder generated under full in the central cache.
I can see the content of the central cache without problem including the double extensions and previews of the files as thumbs in the Finder, jet with option to show hidden files I can see the CacheT file but only as a blank document icon and I can't find an application on my system to open this file to reveal its content.
Just tried it on a folder with small sized files and having set preview quality to HQ and 100 % preview (checkerboard icon in Path Bar) and then used the option from menu tools to build and export cache to folder including 100 %. Both subfolder in Central Cache and about same sized hidden CacheT file where generated without problems and the full preview was instantly on demand using magnifier. (but all this without the option in prefs to auto export to folder)
So to me it seems (if I understand everything correctly) that either the existing exported files from CS5 do cause the problem or your setup of CS6 is not working correctly.
Are we still on the same track or am I completely lost?

"The export operation failed because it ran out of memory"

I'm trying to export from Flash CS5 to an mov.
Project is in custom size (874 x 480) but when saved to SWF it's not really
that big (15mb). So I'm a little confused.
Anyone encountered this error message?
This is quite new to me.
I've got 2 HD on my mac with each having at least 2Tb available each,
so don't think its that.
Memory is 8GB and I got nothing running except the Flash CS5.
Need some help my friends. Client

Not sure if your problem has been solved. Flash is flat broken on this. I am using CS6, same problem, same headache. Adobe should be ashamed for not fixing this issue. Someone even suggest to use third party screen capture tool like Camtasia? Why don't you just remove the Export from your Flash menu all together if anything beyong 30 seconds of video export would fail?
In the meantime, Try download Swivel from cnet. The app will happily convert your SWF to anyformat you like. Both Mac and Windows version are available. This was one of the best life saver I ever downloaded from cnet.
HTH

The creation of the export DataSource failed

Dear All,
Can u give me the some information to fix the following error which i got while moving Multicube from Dev sys to Prod. sys. multi cube consits of lot of ODS object as dependent objects.
Error FYI.
The creation of the export DataSource failed
RFC connection to source system PBWCLNT300 is damaged ==> no Metadata upload
RFC connection to source system PBWCLNT300 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object 0CRM_CN2P
Regards,
Veeru.

Hi Srinivas,
If itz SS problem i can able to transport the other objects like cubes, Info Obj.. etc. only while transporting the ODS obj it is showing
can u help me on this.
any way i wil chk with basis team and ask to reset PWD.
Regards,
Veeru.

ODS activation error( The creation of the export DataSource failed

Hi Friends,
i have a problem activating the ODS. after defining the ODS, when i try to activate the following error is occured
1.The creation of the export DataSource failed
2.RFC connection to source system BWD100 is damaged ==> no Metadata upload
3.Error when creating the export DataSource and dependent Objects
Any help would be appreciated
Thanks

Seems that there are one or more characteristics in the ODS for which one or more attributes may be new or inactive.
Please see SAP Note 597326..Pasting the content below..Solution steps are also given..
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
cheers,
Vishvesh

The creation of export datasource failed.

Hi everyone! This is Chong Tao from Central Michigan University and I got one problem recently when I was doing my set-up of the BW course. I actually wanna copy the infocube but when I click the "Generate export datasource", it automatically comes up one error message "The creation of export Datasource failed". What should I do to overcome this problem? Thanks for paying attention to this problem and I need your valuable advice as soon as possible since it is for the student in this SAP BW course.

Hi,
I guess your objective is to copy an existing infocube. Right ?
In that case, Right Click Infocube and use 'copy'. This will create another Infocube with the same structure, but with no data. You can then fill this copy Infocube by cerating transformation between the two infocubes and scheduling through DTP.
'Generate export datasource' can normally be done when there are two separate BW systems and you want an Infocube to be a source of data to another Infocube in a different BW system( though it can be used in the same BW system as well).
Best Regards

Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)

Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
This is on two (2) separate machines. These are NEW INSTALLATION development work stations (laptops). One is Vista (Visual Studio 2008 / Crystal Reports 2008), and the other is Windows XP Pro (Visual Studio 2003 / Crystal Reports XI R1).
I am using EXISTING CODE (established over several years), and EXISTING REPORTS (established over several years). Old development station was XP Pro, as above, and still exists, and still works fine.
I can open the report in Crystal, and see the results just fine. Data for the report is obtained via ODBC.
Can someone identity the actual error by the Error Code above, and advise. Thanks You in Advance.

Ok, so let's start at step 1:
SP 1 just released and I'd recommend applying that. The SO is available from here:
https://smpdl.sap-ag.de/~sapidp/012002523100010503722008E/cr2008_sp1.exe
For future reference, msm matching the above SP is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011715292008E/cr121_mm.zip
and msi is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011722132008E/cr121_redist_install.zip
Step 2: a few questions:
a) I am not sure what CR SDK you are using; RDC, .NET? I suspect that you are using the CR assemblies for .NET, but do confirm.
b) what is the database you are connecting to?
c) is this a web or a win app?
Step 3: As the error can mean any number of things (to me it's just means something went wrong during the attempt to connect to the database...), the solution may vary, however the troubleshooting steps remain quite consistent:
1) Do make sure the report is indeed working in the CR 2008 designer (e.g.; make sure "saved data" is not enabled.
2) Try a simple new windows app with one of your reports. See if you have a report with no subreports and use it
3) If that works, use a report with subreports
4) If the above does not work in (1) above, create a new report to the same ODBC connection, do not code any database connection - let the report prompt for the logon parameter (PWD)
5) Run the new report in your new app, enter the PWD when prompted
6) If this works, add your database logon code
7) If that works, add your original report (again, preferably with no subreports)
8) If that fails, ensure that the subreport and main report use the same database connection type (ODBC)
9) If it works, see if you can determine the difference between your old app and the new app.
Ludek

Hi Expert , crystal report export problem. system not responding

Hi,
crystal report export problem. system not responding.
Thanks
Rajkumar Gupta

Dear Raj,
Please try this
          Try
            Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
            Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
            Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
            Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            rptDoc.Load(rptPath)
            rptView.ShowExportButton = True
            rptView.ReportSource = rptDoc
            For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
                oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
            Next
            For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
                For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
                    If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
                        oSubReport = rptObject
                        rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
                        For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
                            oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                        Next
                    End If
                Next
            Next
            'Setting Paper
            Dim rawKind As Integer = 0
            Dim printSet As New System.Drawing.Printing.PrinterSettings
            For i As Integer = 0 To printSet.PaperSizes.Count - 1
                If printSet.PaperSizes.Item(i).PaperName.ToUpper = PaperName.ToUpper Then
                    rawKind = CInt(printSet.PaperSizes.Item(i).RawKind)
                    Exit For
                End If
            Next
            Dim MyTest As New SaveFileDialog
            rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
            rptDoc.ExportToStream(ExportFormatType.Excel)
            'rptDoc.SaveAs("C:\TBKING.xls", True)
            '''How to export the report
            Try
                Dim CrExportOptions As ExportOptions
                Dim CrDiskFileDestinationOptions As New _
                DiskFileDestinationOptions()
                Dim rename As String
                rename = rptName.Replace(".rpt", "")
                Dim CrFormatTypeOptions As New ExcelFormatOptions
                CrDiskFileDestinationOptions.DiskFileName = _
                                            "c:\Report\" & rename & "_Export_File.xls"
                CrExportOptions = rptDoc.ExportOptions
                With CrExportOptions
                    .ExportDestinationType = ExportDestinationType.DiskFile
                    .ExportFormatType = ExportFormatType.Excel
                    .DestinationOptions = CrDiskFileDestinationOptions
                    .FormatOptions = CrFormatTypeOptions
                End With
                rptDoc.Export()
            Catch ex As Exception
                MsgBox(ex.ToString)
            End Try
            '' end by kevin shah
            rptView.Show()
            rptView.ShowExportButton = True
            Dim oFrm As New System.Windows.Forms.Form
            rptView.DisplayGroupTree = True
            rptView.Dock = System.Windows.Forms.DockStyle.Fill
            rptView.Location = New System.Drawing.Point(0, 0)
            oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
            oFrm.Controls.Add(rptView)
            oFrm.Name = "Report Viewer"
            oFrm.Text = "Report Viewer11"
            oFrm.ResumeLayout(True)
            oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
            oFrm.TopMost = True
            oFrm.ShowDialog()
        Catch ex As Exception
            objMain.objApplication.MessageBox(ex.Message)
        End Try
By pressing this button XLS file be generated on C:\report\
Hope this will resolved the issue
Thanks
Kevin

DSO activation failed due to creation of the export datasource failed

hi experts,
i am activating DSO, but failed. Cause is "The creation of the export DataSource failed"
there are many threads in the forum saying restoring the BI myself source system can address it, I tried many times, but failed.
I used program RSDG_ODSO_ACTIVATE to activate an already activated DSO, it returned same error and the original activated DSO turned into inactivated. So I guess there must be something wrong with the setting.
please advise, thanks!
attach error info:
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The system could not create DataSource .
System Response
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
Procedure
Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).
The delta process ODS does not exist
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object ZFIM_D09

Hi,
As I read the system RESTORE option should resolve your issue. From RSA1 try to restore your source system and try to active your DSO again.
Regards,
Durgesh.

Transport Error-The creation of the export DataSource failed

Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSo i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
the request conatins just the DSO and not the Export datsource.i have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Has any one come across this kind of an issue.
Thanks in advance!!!!!
Regards,
Umesh.

No it didnt seem to work still got the same password error..
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
/     The creation of the export DataSource failed
      Name or password is incorrect (repeat lo gon)
      Name or password is incorrect (repeat lo gon)
      Error when creating the export DataSource and dependent Objects
      Error when activating DataStore Object 0BBP_BID
/     The creation of the export DataSource failed
      Name or password is incorrect (repeat lo gon)
      Name or password is incorrect (repeat lo gon)
      Error when creating the export DataSource and dependent Objects
      Error when activating DataStore Object 0BBP_QUO
/     The creation of the export DataSource failed
      User not authorized. Session terminated
      User not authorized. Session terminated
      Error when creating the export DataSource and dependent Objects
      Error when activating DataStore Object 0PUR_DS03
/     The creation of the export DataSource failed
      Name or password is incorrect (repeat lo gon)
      Name or password is incorrect (repeat lo gon)

QT 7.1 Export Problem Failed(-2126)

Similar Messages

Maybe you are looking for