QT audio only / no video for divx 6.0

I bought a cool samsung camcorder - shot some video and imported to my new mac book pro 15" and I only get a blank white screen with audio. The video info says:
DivX 6.0, 720 x 480, Millions
DVI ADPCM, Stereo, 22.050 kHz
I have tried every player I can find and mplayer is the only one that plays it correctly. I have tried every codec I can find and nothing works.
All I want to do is be able to edit my video in imovie and i cant seem to get it in there. Please help!

Similar Messages

My Elements 8 tutorials have audio only, no video. Any suggestions? Thanks

My elements 8 tutorials have audio only, no video. Any suggestions? Thanks.

Which Tutorials you are talking about?
- Elements Inspiration Browser?
- Adobe.com Tutorials?
- Or something else?
+ http://bit.ly/plFUdD

Audio but no video for .mov file.

For Windows XP (Home Edition 5.1.26700 Service Pack 3 Build 2600):
My QuickTime Player 7.6.6 shows a window but the window is empty only the audio is present.
The same or similar is the case in VLC, RealPlayer, and DivX Player.
Additional information from my Mac OS X:
- The .mov file plays perfectly on my iMac in my QuickTime Player 10.0(114).
- Cmd-I reports for the .mov file: codecs: H264,AAC.
- The file is produced by AddMovie version 1.8.6 from a .flv file and the developer states:
’AddMovie uses Mac OS technology "out of the box" so to speak. In other words all it does is call system functions that in turn call the codecs installed on your system to do their job. I don't write any codecs (i.e. compressor/decompressors - i.e. exporters/importers) - other third party developers do that. So, getting the output of AddMovie to be compliant for other software depends on your choice of these third party add-ons, and the selection of them in the preferences window.‘
- Perian 1.2.1 and Flip4Mac 2.3.4.1 are installed.
- VLC version 1.1.2 is installed and it plays the .mov file with audio but no video like QuickTime Player in Windows.

Thanks again, QuickTimeKirk.
I think the audio rate was to blame. I changed the audio format in QuickTime Player 7 Pro from (I think) Linear PCM to AAC and the kbps number from the default value 128 to 64. Then I changed the mark for the video rate from automatic to the option of setting a limit and set a suitable limit. That way I was able to control the total kbit/second rate for the exported .mov file so that it got a reasonable size.
When I compare the source .flv file with the produced .mov file for the case when they have about the same total kbit/second rate, I can see that the .mov file is smoother or has less detail than the .flv file although the difference is not big. Increasing the video rate limit in QuickTime Player 7 Pro causes a bigger .mov file with better quality to be produced.

In Premiere Pro CS5.5 AVI file imports audio only - no video.

I've got a file (one of 3) I've been given to create a smaller file (320x480) from.
The file is an avi file and plays (video and audio) just fine in the native Windows media player. (I'm on Windows 7 Ultimate 64-bit) There are no issues of memory or HDisc space.
Video:
The file is 2:21:29 in length.
720x480
Data rate 1489kbps
Total bitrate 1617kbps
29 frames/second
Audio:
Bit rate 128kbps
Channels 2 (stereo)
Audio sample rate 48 kHz
The file is about 1.6Gb
This is one of 3 I recieved. The other two were of comparable specs and similar length (not exactly but one was longer, the other shorter.)
The problem is that this particular file (the other two import perfectly), when imported, only comes in as an audio file. No video imports. The other files import as audio and video. No error message either.
I've imported all kinds of video files in the past with different frame sizes, rates, and aspect ratios, and codecs, yet I've never had one that only imports the audio without the video.
Suggestions?!

Post in the Premiere Pro forum. This forum is for suite specific issues only.
Bob

Video transfer to PC but got audio only, no video.????

hello,
I have a Curve, 8330. I took my first video, a one minute epic. It plays great on the BB. I was able to transfer it to my PC, but I only get audio, no video. I tried both an email transfer and a direct cable connect with ROXIO. It saved as a Quicktime file, but just won't play right. What am I doing wrong? I also tired opening it as a WMP player with the same results; audio but no video.
MDH

Let's be constructive:
BUT WHY doesn't it work? and how can we fix it/make it work?
my cheap 'non apple' video cable works fine initially, then a message pops up about it not being an 'offcial' cable or some such, then asks if I want to enable airplane mode (both with or without it already disabled), and disables video out completely. Contrary to the many others that have overpaid for your proprietary cables; I'm NEVER EVER EVER EVER going to pay you for your atrociously overpriced cables, because you're action of 'disabling' 3rd party cables is monopolistic in any sense, destroys any hope competition in this area, hinders innovation by third party peripheral developers, and is downright unamerican imho because it does so. You've gone to far this time apple! I've come to the conclusion, you obviously don't care about functionality, as your hardware is almost always overpriced, proprietary, good looking junk, and you keep shaking my pockets for more money with your overpriced accessories and constant barrage of itunes streamery.
Anyway, how can I use my device to do video out on this officially licensed apple dock I have? It doesn't seem to work; and I paid a lot of money for it. If there isn't a solution; maybe you should give out refunds for all the devices that now don't work? Thanks

Quicktime X Exporting Audio only - No Video

Hello,
Any MOV file I brought into Quicktime X I used to able to export to 720p, 1080p or 420p to
a nicely encoded, universal H.264 Quicktime file.
Now, when I try and export, it makes a small audio file and no video. The codec I'm encoding from is 'Animation'...should be easy..?
Any ideas?
thanks,
Dan

I'm having the same problem. Exporting as a 720 or a 480 from a 1080 only makes audio files. It used to work great under Snow Leopard.
Even the Export for the Web/Broadband only ends up making audio-only .mov file
I rolled back to my old copy of QuickTime 7 pro and was able to export a 720 and a 480, though you have to wade through a lot more codec options...
K
x

How do I capture audio only, no video?

I'm trying to capture an audio cassette, patched RCA/XLR to a Kona Card, to a G5 tower running FCP6. Since I want to capture audio only, I unchecked the video box in the clip settings tab of the LogCapture window. But when I capture now, I get a message saying "This operation could not be completed as there is no video".
How can I capture audio only? Can't turn off the video in Kona ctrl panel, must be in FCP.
Thanks in advance for the help.

Yes, as I mentioned, I did uncheck that video box, after which I got the message 'operation could not be completed as there is no video' (& capture failed). My capture setting is to Kona, but I've also tried Generic, but no luck.
This then led to my first crash course in SoundtrackPro, which is now recording the audio I needed. But I would love to figure out why FCP is not letting me capture audio w/o video, so any further suggestions are appreciated.

Audio Only, No Video on QT Pro 7 w MPEG-2 Component.

Hello,
I am having a problem which is described by many others. I have several videos (from my digital TV tuner card) which are MPEG2 video encoded with MPEG1 audio encoding. I've got QT Pro (7.1.5) as well as the MPEG2 playback component. However, when I open MPEG-2 muxed files all I get is audio and a white screen. The files play back perfectly in Windows Media Player.
I'm also curious if this is a install issue with the MPEG2 playback component? When I downloaded the MPEG2 component install file form Apple store and then ran it, the installation screen said "For Quicktime 6". How do I know if the component has been successfully installed?
And I have also tried opening them in Stream Clip but have the same audio-only problem. I've also tried viewing the files in QT's safe mode.
Any help would me much appreciated.

As you have discovered, QT does not support the export of sound from muxed mpeg files. Fortunately, this freeware will export to several formats. It also allows you to do some editing of mpegs without re-encoding if that is desired: Mpeg StreamClip

Audio only, no video, when importing .avi - VP60

I'm trying to make a machinima (Sims 3) and am new to "serious" video editing and Premiere (I have done little projects on Windows Movie Maker and stuff like that before). I'm using the trial version of CS5.5.
My problem is that whenever I try to import .avi clips, they import as audio only and no video. The files open fine in Windows Media Player. The weird thing is that this has only started happening in the middle of my project, after I've already successfully imported and worked with several files recorded in the same way (and so I assume they were the same format).
After researching this issue as much as I've been able to, I downloaded the oft-recommended Gspot utility and took a look at some of the problem files. It says the codec is VP60, but that I already have it installed.
I haven't, to my knowledge, done any kind of converting or compressing of any of the videos before this happened. Another weird thing, though, is that files that imported correctly before are now only importing audio just like the newer ones.
I have tried converting these files to mp4's and other formats, which brings the video back into Premiere, but at a great loss of quality. I've also tried updating/reinstalling Quicktime and even a system restore, all without any luck.
Any help or ideas would be greatly appreciated, as I have a deadline FAST approaching!

This is a distribution format, not intended to be edited, because of the heavy compression. You have several options:
1. Try with consumer editor, like Magix, or WMM.
2. Convert to something editable and accept the quality loss.
3. Get the original, not compressed material from the copyright owner.

Video cable for the Iphone 3G - audio only, no video output to TV

I have been reading that with the iphone 3G you HAVE to buy apples video cables in order to play back video on your TV, is this true?
I just got a cable for christmas and it isn't officially licensed by apple and the video does not output to the TV, only the audio. I hope this isn't the case, but maybe it is true??
If my cable isn't working because of some need (forced on us by apple) to only use "apple" cables I will never purchase videos from itunes. It seems rather trivial to have to buy proprietary cables for more $$ in order to buy videos from itunes doesn't it??
In other words... Give us more money so you can keep buying things from us.
Sorry, I am a bit frustrated.
Message was edited by: zstevek
Message was edited by: zstevek
Message was edited by: zstevek

Let's be constructive:
BUT WHY doesn't it work? and how can we fix it/make it work?
my cheap 'non apple' video cable works fine initially, then a message pops up about it not being an 'offcial' cable or some such, then asks if I want to enable airplane mode (both with or without it already disabled), and disables video out completely. Contrary to the many others that have overpaid for your proprietary cables; I'm NEVER EVER EVER EVER going to pay you for your atrociously overpriced cables, because you're action of 'disabling' 3rd party cables is monopolistic in any sense, destroys any hope competition in this area, hinders innovation by third party peripheral developers, and is downright unamerican imho because it does so. You've gone to far this time apple! I've come to the conclusion, you obviously don't care about functionality, as your hardware is almost always overpriced, proprietary, good looking junk, and you keep shaking my pockets for more money with your overpriced accessories and constant barrage of itunes streamery.
Anyway, how can I use my device to do video out on this officially licensed apple dock I have? It doesn't seem to work; and I paid a lot of money for it. If there isn't a solution; maybe you should give out refunds for all the devices that now don't work? Thanks

HT201335 Hi I have an Apple TV Gen 2 and an iphone 4S. I am able to see the Airplay icon on my iphone however when i press it there is no mirroring slider button. I have latest software on both devices. I can only here audio but no video for real racing

Has anyone experienced same issue?

I have read of others having had this button dissapear. Apparently if you totally shut the pad down and reboot it will then reappear.
Hope that helps

Bought TV and Movie and have audio only NO VIDEO!!!

Why don't I have video? I have plenty of space. Just bought the new IPod 30GB for my niece for Christmas, and I wanted to put a few TV shows and a movie on it for her. I was able to download the TV shows and the movie, but got only audio. Don't know why I did not get video. PLEASE HELP!!!!
Thanks
Beth

I figured it out. I had the TV setting as "ON" when it should be "OFF" in order to see the video.

Audio fine, no video for .mov files

I am trying to view films on disk that a friend has lent me. MPG4 files play just fine, but the .mov files do not play the video, only the audio. A Quicktime message showed up that told me I would need other components, and directed me to the DIVX site. I downloaded their codec, etc, but to no avail. I have also tried the Troubleshooting tips, which include disabling the Direct3D acceleration, etc, but again to no avail. Would getting the correct codec correct this problem? Any advice would be much appreciated.

Nothing about Sorenson 3 (video track) AAC (audio) or Apple BMP (image format layer) that would keep the file from playing on your machine.
Do you open these .mov files directly from the CD (double click) or is there some app that is used from the CD to play them?
Try a double click and test the files while logged in under a different user account.

Cant hear audio after converting videos for ipod

After i convert any video i have with itunes, it loses the audio. does anyone know how i can fix this so i can watch videos on my ipod with sound

QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, when you convert videos in iTunes to iPod format they only show the video and no sound since iTunes (really QuickTime) is not looking for the audio track within the video track and it gets lost.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
but there are other applications besides MPEG Streamclip you can try as well.
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
The Complete Guide to Converting Video to iPod Format (Mac)
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-convert ing-video-to-ipod-format-mac/
See other tutorial articles over at iLounge...
http://www.ilounge.com/index.php/articles/tutorials/
Patrick

Chromebook flash player works except at IMDB, plays audio but not video for movie trailers.

Using Flash version 15.0.0.189.
14 q039 Chromebook
I have been using my new HP Chromebook for a couple of weeks now. Very trouble free and fast, with little bloatware. This leaves me with time to pursue funny little inconvenient glitches like trying to figure out why I have audio and a black video screen in native (small) and full screen modes at IMDB (Internet Movie Data Base). Yes, I tried their FAQ and the Adobe FAQ without a resolution.
I am an old mouse who knows that somebody above the maze that I am in, will know exactly where the cheese is.

I'm having the same problem on both windows and mac OS. This seems to be a bug because QT 7.6.5 plays them fine on either machine, but QT 7.6.6 does not. I have over 2000 files encoded using h264 which played perfectly before the upgrade. I tried logging in under a different user which does Not work. I notice also when I view them in the finder window there is no poster frame, only the letters MPEG4 under the quicktime logo
I hope this is an easy fix. I don't want to re-encode all those files and upload them to my web gallery.
Help!
Thanks

QT audio only / no video for divx 6.0

Similar Messages

Maybe you are looking for