QT configuration error using a capture preset...

When I opened Final Cut and went to log and capture I received this error massage:
“An error occurred while configuring QuickTime using the current capture preset. Please quit final cut and check your hardware configuration”
Since the first time this happened I have updated final cut, updated my cinewave capture card, reinstalled final cut, reinstalled QuickTime and every other process in between and I still get the error massage...
what else can I do?

Hi Pablo
Frank already mentioned clearly in his post. I just want to share some useful links. First start with the link, like What to use When. And see the section where it clearly says we cannot share the data between the parent and its child adf region having JSFF and vice versa. This is achieved using Parameters Map etc.
What to use When - http://www.oracle.com/technetwork/testcontent/adfregioninteraction-155145.html
Fixed - http://www.baigzeeshan.com/2010/04/creating-pages-with-regions-in-oracle.html
Dynamic - http://www.baigzeeshan.com/2010/06/working-with-dynamic-regions-in-oracle.html
Thanks
Ravi Jegga

Similar Messages

X4200 - static IP configuration error (using serial port)

I try to setup a static IP address of ILOM on a Sun X4200 server using serial port
After login as root I use command from manual:
set /SP/network pendingipaddress=192.168.2.123 pendingipnetmask=255.255.255.0 pendingipgateway=192.168.2.1 pendingipdiscovery=static commitpending=true
but system say
"invalid command syntax"
Usage: set [target] <property>=value> [<property>=<value>...]
Problem is with "commitpending" command but i don't know why, anyone know the possible reason?
Sincerrelyy
Cyprian Sawicki

I try to setup a static IP address of ILOM on a Sun X4200 server using serial port
After login as root I use command from manual:
set /SP/network pendingipaddress=192.168.2.123 pendingipnetmask=255.255.255.0 pendingipgateway=192.168.2.1 pendingipdiscovery=static commitpending=true
but system say
"invalid command syntax"
Usage: set [target] <property>=value> [<property>=<value>...]
Problem is with "commitpending" command but i don't know why, anyone know the possible reason?
Sincerrelyy
Cyprian Sawicki

Capture preset for a multishoot with 3 diferent cameras

hello everyone
i just shot a three camera shoot with a panasonic dvx100b, Canon Gl1 and a Sony HVR-A1U 1080i
the footage from the dvx100b looks bad not clean also , i shot it on a tripod from the back of a room , there was lighting on the stage but the footage is not crisp or clean, im not sure if its because of the lighting situation and white balance or
maybee its because i used a wrong capture setting?
what preset should i use to capture this footage, since each camera is different, i need to capture diferently and then what sequence settings- now that Final Cut 6 can handle mix format.
thanks
Danny

what preset should i use to capture this footage, since each camera is different
Capture at the same settings as what you recorded. The DVX100B and the Canon GL1 both only record in DV (NTSC or PAL) so choose the appropriate capture preset in FCP. One note, use "Firewire Basic" as the Device Control setting IF you capture from a Canon camcorder.
The HVR-A1U can record in either HDV or DV. Use the capture preset that matches that ... but if you recorded in HDV with the camera, you can choose to down-convert to DV in-camera during the capture process.
-DH

Sequence and Capture Presets

I've shot and captured 35 hours of footage originally shot in HD (output in standard def 16:9) using Final Cut 5.0. After loading it and spending hours organizing it, I found my Sequence Present is 3:2 - Also the Aspect Ratio is set to NTSC-CCIR 601/DV Anamorphic 16:9 is off. Compressor is DV/DVCPro NTSC. Pixel Ratio is also NTSC-CCRI 601/DV.
Capture Preset is NTSC (3:2) Anamorphic is unchecked. Compressor is DV-NTSC. input is DCR TRV 900. I captured from a Z1U.
Can anyone tell me- aside from being a dumb *** in the first place- how I can redeem my project> ? I need this to be for professional broadcast (standard def, 16:9) - I'm on deadline and want to avoid recapturing. If I DO need to recapture, can retain markings/ subclips?
Thanks a bunch!

Well there's a couple of things to check.
What settings did you use on the Z1U? (HDV, 1080i, 30fps?)
Did you use the capture preset mentioned in your post to capture the material? (check in the browser or item properties)
If that's the case, you have an offline version of your material and you will have to recapture the whole thing (use the HDV capture preset) or online your final edit (basically only recapturing the material used in the final edit)
I'm not sure how the online process will work in this case as I only have experience with PAL. It could prove to be tricky but someone here in the discussions forum must know if and how it's possible.
- Aleksander
G5 2 GhZ dual Mac OS X (10.4.8)
G5 2 GhZ dual Mac OS X (10.3.9)

Error while configuring QT--can't capture in FCP HD

I keep getting a message saying "Error occured while configuring QT using the current capture presets, please close FCP and check your hardware configuraton" when I try to capture. All settings are consistent with video output device. I'm upconverting 720p to 1080i and capturing at 1080i 29.97. What else can I do!?!?!?

What are you trying to capture? What format? What capture card are you using?
If you are trying to upconvert HDV via firewire, you can't do that. You can only capture native resolution or lower "offline quality" resolutions. You cannot cross convert or upconvert via firewire.
But that is just a stab in the dark.
Shane

Beta to FCP HD timcode errors & capture presets

I'm running a BetaSP deck to my G5 and when I attempt to capture I get an error message saying that the timecode was lost and that I have to recapture. The Beta tape I'm using is a professional telecine done from a super-16 print (if that matters). Assuming that there isn't an actual break in timecode from the Beta tape, what else could be causing this? Does it have to do with he capture preset?
Also, on a side note, when capturing from a BetaSP tape, is there a capture preset that will give me a full quality captured clip?
This is driving me crazy and if it continues I'm going to have to use Avid and I really don't want to do that.

I'm running a BetaSP deck to my G5 < </div>
You're not running it in directly, the Beta has no Firewire output. So how is it connected to your computer and how are you controlling it? Decklink, AJA, Dazzle, DA-Max, Laird?
The Beta tape I'm using is a professional telecine done from a super-16 print (if that matters). < </div>
Not in the slightest. Video is video. The film is just video now.
Assuming that there isn't an actual break in timecode from the Beta tape, what else could be causing this? < </div>
The communication between your deck and the G5, usually hooked up via your capture hardware, is not working properly. You need to follow the mfr's setup instructions very carefully.
Does it have to do with he capture preset? Also, on a side note, when capturing from a BetaSP tape, is there a capture preset that will give me a full quality captured clip? < </div>
Nope, video is video, assuming you get the input configured correctly. But you must use the preset specific to your capture or digitizing device, which you have not told us about yet.
This is driving me crazy and if it continues I'm going to have to use Avid and I really don't want to do that. <</div>
What's an Avid? You may have to go back to your Avid if you cannot get your G5 to recognize the hardware between the Beta and Macintosh.
bogiesan

Configuration Error 213:19 Adobe PhotoShop CC when sequenced using Microsoft App-V 5.0

Does anyone out there have a Microsoft App-V 5.0 recipe for Adobe PhotoShop CC ?
When I run the App-V package, I get the License Configuration Error 213:19
Thank You. very much for your time. Karl

You will probably get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

Laptop crashed, moved HDD to another PC to use CS5 but it gives me a Configuration Error. Error:6

Hi, My laptop containing Adobe CS5 recently crashed. I do not have the serial as this was activated at my school and they only do it once for everyone. What I did was to take the HDD out and put it onto my PC and try to use the application from there, a method which worked before on other applications, but when I wanted to load up dreamweaver and any other applications in the suite it failed to load and popped out the following message:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Configuration Error
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of the screen.
Error:6
http://www.adobe.com/support/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Can anyone help me out? I don't have the serials nor the CD to reinstall so I'm practically stuck and I cant afford to buy the thing again.

Adobe applications simply don't work that way. Installation puts software and configuration information not only in application-specific directories under \program files\, but also in system directories. As such, Adobe application installations are not portable.
Unfortunately, in order to re-install your software, you will need to go back to your “school” for installation media and serial number information since the software was licensed through them and not directly via Adobe.
- Dov

IP Configuration Error - IP address in use by another device

My parents' have set up a wirless netwrok in their home but are experiencing a IP configuration error.
They have Cable Broadband going into a cable modem. The modem is connected to a DLINK router via ethernet. The router has an ethernet connection to one computer (PC running Windows 2000) and an ethernet connection to a NETGEAR Wall-Plugged Ethernet Bridge XE102 which provides a wireless connection for an iMac G5 in another room.
The PC and the iMac are able to connect to the Internet without any problems. However, my PowerBook can see the NETGEAR network but it can access the Internet through it. The following error message keeps popping up:
IP Configuration Error
192.168.0.100 in use by 00:13:46:6d:26:11, DHCP SErver 192.168.0.1.
I read some previous posts that indicated it may be a problem with an IP address being assigned to a printer (and they do have an HP PSC connected by USB to the PC).
I can't seem to figure out how to free up the IP address. I checked the router settings and it is configured to assign more than just two or three.
Any ideas? Thanks in advanced.

Have you tried resetting your router and reseting your cable modem this should Asign all new IP address to all of the Computers on the network.
To reset your modem unplug it and leave it out for about 3 min and then replug it and the router should either have a reset button on it or from your computer you should be able to reset it.
I think your going to need to change your IP address but try resetting everything first.
see here.
http://forums.livingwithstyle.com/archive/index.php/how-change-your-static-t1847 50p1.html
Also this site will help if you change the PC's Address
http://support.microsoft.com/default.aspx?scid=kb;en-us;308199&sd=tech

Configuring Capture Presets (v. need help)

Background info: MBP with Final Cut express HD, using a DVD-R camcorder(Hitachi
DZ-MV580A).
I previously captured video via fire wire about a week ago, however this time it is via USB.
I believe the reason why I can't capture video at the moment is because it is now connected with USB. FCE HD is telling me to change the capture presets..problem is I do not know where to go in order to do so. I appreciate any help!

I gave that option an attempt. Didn't work. My MBP doesn't initially read the camera. I plug camera in via USB, turn on camera, no response. Sometimes the MBP reads the plugged in camera as a DVD...and then my dvd-drive starts loading.

I am importing videos from my canon sl1 to my macbook when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item 'MVI_1040

I am importing videos from my canon sl1 to my macbook air when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item ‘MVI_1040'' Thanks in advance

Can you access the images on the phone with Image Capture (in the Applications Folder) ?

I am using elements 11. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

I am using elements 11 with Windows7. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

See if this helps:
Error "License store does not allow writing" | Install log | CS5, CS5.5

[svn:bz-trunk] 8910: Bug: LCDS-936 - Should have better error message in servlet log if server in services-config .xml is configured to use wrong class.

Revision: 8910
Author:   [email protected]
Date:     2009-07-29 14:22:26 -0700 (Wed, 29 Jul 2009)
Log Message:
Bug: LCDS-936 - Should have better error message in servlet log if server in services-config.xml is configured to use wrong class.
QA: Yes
Doc: No
Checkintests: Pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-936
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java

After many hard working days.i finally found the error cause,i needed to make weblogic datasource also ADF doesnt work on internet explorer browser,it works on safary.hope it helps somebody

What are the FINAL CUT STUDIO capture presets using a "Blackmagic Intensity Pro HDMI PCI Express Capture Card"

A S-VHS cable and a/v cables are connected to the breakout box.
What are the presets:
1) Sequence Preset?
2) Capture Preset?
3) Device Control Preset?
thanks

1) Sequence Preset?
2) Capture Preset?
3) Device Control Preset?
Is this realted to your other question? Don't post more than once, please. GEt it right the first time and then wait. Patiently.
1. Your sequence rpeset will be determined by the production's output taarget, it has nothing to do with the Balckmagic capture unless you alreday know what that will be. And you do, in fact, because VHS only comes in one way. When you bring your fist captured clip into a sequence, FCP7 will aks if you want to confrom the sequence to the clip's settings. Say yes. Done.
2. Your capture is going to be regular ol' DV. There's no reason to try to use any other advanced codec for VHS. But you probalby hsould have a time base corrector or frame sync in the loop to help correct and stabilize ancient tapes. Your preset if NTSV DV
3. There is not control for a VHJS deck. So une unctrolled device.

QT configuration error using a capture preset...

Similar Messages

Maybe you are looking for