QT from Mac to PC via ROM

Was gonna try to transport a same as source QT via a DVD and have been trying to follow the manual to execute. Not even sure if this method will work. Most of my segments are a gig or so.
Sharing a drive is niggily though I'm thinking of trying a weibetch pocket drive, having the PC work with it first, then dump my stuff on and see if they can read it.
I'm also going to try a DVD with the usual MPEG-2 but not sure if the other end can interface. It might be a problem for a projection presentation off a PC. Sometimes I get weird artifacts with my MPEG-2s even when luminance and color are to spec and creating through Compressor (DVD:Best Quality). I usually prefer the same as source QTs right into DVD Studio Pro.
The immediate problem with my ROM test is that when I go to choose my QT under the content section of DVD-ROM Data, under gnl format tab, it's grey.
You'all never let me, small fry, down. I appreciate any direction as always.

Question for Tiger solved here:
http://discussions.apple.com/thread.jspa?threadID=454961&tstart=0
Server problem reposted here:
http://discussions.apple.com/thread.jspa?threadID=455418&tstart=0

Similar Messages

How to transfer garageband files from mac to ipad2 via internet?

how to transfer garageband files from mac to ipad2 via internet?

I'm asking this question 'cause we do music over internet and I need to send these files to my mate via internet to his ipad2..Didnt know that it doesnt work..Is there any other solution for that?..Thanx for answer anyway..

Send sms from mac address book via iPhone bluetooth

Hello!
Please tell my how send sms from mac address book via iPhone bluetooth?
MacBook Pro 13
OS X Lion
iPhone 3GS iOS 5 development
Best, regards

You can't.

Is transfer from Mac to Windows via external HD possible?

I have been using my mums macbook pro and now I'm moving to town for school and only have a HP laptop can I transfer my music over to an external HD from mac to windows and authorise as well? I will visit often and want to have my purchased itunes music on both. If I buy a song on my HP will it update the mac one automatically or do I need to use my external HD every time? And lastly if it does update automatically, what about music not purchased on itunes, will it transfer those as well? I am a mac noob so please keep your answers easy
Thanks any help would be appreciated.

Yes it is possible.
Connect the external drive to the MacBook Pro
Copy the entire iTunes folder from the MacBook Pro to the external drive.
Open the iTunes folder on the external drive
Rename the file iTunes Library as iTunes Library.itl
Delete the files iTunes Music Library.xml and iTunes Library Genius.itdb
Connect the external drive to the HP laptop
Install iTunes if you haven't already, close it if running
Click the icon to start iTunes and immediately press and continue to hold down the shift key until asked to choose or create a library
Click Choose, navigate to the iTunes folder on the external drive and select the file iTunes Library.itl
Authorise the laptop to your iTunes account
If you are based in the US then music purchases made on one machine can be set to automatically download to your other libraries and any iOS devices. The rest of the world, at present, is limited to downloading apps and iBooks purchased from the store. Coming soon is iCloud which will, for a fee, also allow non-store-purchased music to be backed up and synced to your computers or iOS devices via the cloud.
tt2

Games from Mac to ATV via Airplay

Hello. Why is it not possible to play games from my Macbook pro (Mountain Lion) with ATV (3rd generation) via Airplay mirroring? I can mirror my desk top and watch movies and online video streams with no problem but games lag terribly. On the Macbook screen they run flawlessly but freeze and stutter on the ATV. I have tried this connected via ethernet as well as wirelessly and the result is the same. If ATV is just mirroring the screen of my Mac then surely it shouldn't matter what the source of the signal is?

playing a game have a hard demand on the cpu, and video card
mirroring have a hard demand on the cpu and video card
playing a movie don't have that hard demand on the cpu and the video card
just showing the desktop don't have that hard demand on the cpu and the video card
you're doing 2 things at once which put preasure on your computer hardware this cause lag
if you want to play games on the tv screen using a cable is the best path

Error connecting from Mac to Linux via SSH (Permission denied (publickey...

Hello together,
I have a perfectly working setup with my XP machine, Putty and my Suse Linux server that allow for remote login via SSH. I use Public Key authentication.
However, when I try to login from my Mac, all I get from the Mac side is a
"Permission denied (publickey,keyboard-interactive)."
And I can't establish the connection. On the server in 'messages' I get:
"sshd{6046}: Accepted publickey for {userName} from {myHomeIP} port 38335 ssh2"
What could be wrong here?
I would like to use the same keys on my PC and my Mac so I just copied the key files into the .ssh directory on the Mac, did a chmod 600 on them and then tried to remote log-on with the follwoing from the terminal:
"ssh -l {userName} {host} -i {keyFile}"
My questions are:
1) How am I sure that the Mac uses the right key files? (or uses them at all)
2) How come my server says "accept publickey" and no connection is established?
3) Do you have any other idea on how I might get this to work? What I need is a method to copy files (not via FTP) to my server and let the process run without supervision / user interaction.
Thanks a lot for all your help!
Cheers
Message was edited by: Sebastian_R (some typos)

If you copied your files from Windows, I would check to make sure your lines are <LF> terminated. I have not played with Putty so I do not know the way it line terminates its ssh key files, but Windows has a long tradition of using <CR><LF> to terminate its lines.
cat -v ~/.ssh/id_rsa # or whatever your file names are
If there are <CR> characters in the file, they will show up as ^M
Next get more diagnostic information from ssh using an *ssh -v -v -v*
If you know how to tell Putty to do the same thing, do it from Putty as well.
Now compare the debug output from the working vs the non-working ssh commands. The differences will tell you a lot.
If you look at *man ssh* and search for permissions it will tell you what files need restrictive permissions. You can get a permissions denied error if your home directory allows Group or Other write access. The $HOME/.ssh directory needs to be set so ONLY the Owner is allowed to access it. And some of the files in $HOME/.ssh require specific permissions. The ssh man page details this.

Sharing Mobile Internet from Mac to iPhone via WiFi

I am using a Macbook Pro, OS X 10.9.3.
I am using the internet via a mobile USB stick that I bought today. The set-up worked perfect and I have no problem accessing the internet on my mac! Earlier today I chose to share the connection so I could use my iPhone & iPad. I then went away for 20 min, and when I came back I couldn't share my internet connection anymore.
I've tried closing and opening the internet, choosing to share my connection via bluetooth, but nothing helps. I've set it to share the connection via HUAWEI Mobile (which is the name of the USB) and to computers using WiFi. The exact same settings I used before, when it worked. And now it doesn't
I've tried using the "create network option", but when I choose to join the network on my iPhone it says that "the computer isn't connected to the internet" -even though I am!
What happens when I try to share my connection: The "shared connection symbol" (arrow in the wifi symbol) shortly flashes up, but then it seems to be searching for another wifi connection, doesn't find it (the reason I bought mobile internet: There is no wifi here) and then the symbol is just light grey (= no wifi).

No.

How to move iTunes from Mac to PC (via external drive)

I would like to copy my iTunes library from my home iMac to a PC laptop (I know, don't ask, it's a work tool)
- without clogging that work PC with all the music data, so I am thinking external drive.
Here are my questions:
first, how do I need to format that drive? MS-DOS (FAT) or else? (just purchased a LaCie mobile drive)
second, what do I do, back up from within iTunes or just move MyMusic folder over to external drive?
Any help is highly appreciated, first week on PC here!

Format the drive MS-DOS.
Copy the entire /Music/iTunes/ folder from the iMac to the external.
Plug the external into the Windows computer.
Hold Shift and launch iTunes.
Select Choose library.
Select the iTunes folder on the external.
That is all you need to do.

Switching files from Mac to PC (via an EHD)

Hoping this is the right forum ... I have a Toshiba 500gb external hard drive. I've been using it to back up data and to switch work, etc. between my usual computer (eMac) and a laptop (Dell). Since a recent crash on the Mac I decided to do a full back up of the hard drive. The best way to do this seemed to be to partition the EHD, so I created an 80gb section for the HD back up and left the rest for my usual use (occasional back ups, storing films/music, moving between Mac and PC, etc.). When I came to connecting the EHD to the PC, though, I discovered it was no longer recognised - presumably because in partitioning the EHD, I'd formatted it for the Mac using disk utility (which I'd never done before). So, my question is, how to proceed? - is it possible to create a section on the EHD which would be unformatted and would therefore work on the PC as well as the Mac, and if so do I have to start the whole process again? i.e. wipe the EHD clean, and create three partitions. And can this all be done using disk utility, or would I need to use some other means?
Any help with this would be gratefully received.
Thanks.
AJ

OK. How would I do that? And would it mean starting again? i.e. I'd have to wipe the drive and repartition it. Or can I just format part of it with FAT without interfering with the rest?

Can not transfer files from mac to iphone5 via bluetooth

getting message" service is not available for this device" . appreciate any feedback

You sync via itunes.
Click Support at the top of this page, then click Manuals. You will find the manual there.

Syncing contacts from Mac to iPhone via iCloud

Ok, second time to type this up, as the program cannot remember what I typed (I changed my devices).
My wife and I shared our mobile me account on our MacBook pro. She logged in with her account, and I had mine. I updated to lion. No problem very smooth. Then I set up my wife with her own iCloud account and purged her account and her iPhone 3GS of the mobile me account. Still, everything worked out great. My wifethen notified me that she has no contacts which messes up a lot of stuff. No problem. I transferred the address book data to her part of the computer. Not an easy task considering that it was 31mb and I no longer had the ability to drop it into iDisk.
Ifigured that iCloud or a simple sync would put all the contacts back on. No joy. A sync would not restore the contact database. It says that iCloud is syncing it. how long does it take? And why can I not simply syn it through iTunes? But iTunes gave me an error and would not sync it. So, what am I doing wrong? Her address book has all her contacts, and so did data is there.

Why won't iCloud recognize my contacts? That is the question I intended to ask. I checked iCloud.com, and it does not show any of the contacts in the address book that are in the address book. Did the usual check and turned on everything in Preferences that I know of. Still, it won't see it. Trying to go through iTunes. Maybe I missed something there.

Mail lost from .mac and locally, can i restore from cache???

Hi,
I have 2 years worth of messages about 3000 on .mac and have
set up tiger mail to view these via imap and cache all messages
and attachments locally.
A couple of days ago i got a warning you are running out of space from
.mac so deleted (via the webmail interface) the oldest 500 messages.
I also deleted them from trash (again via the web interface).
When i then opened mail it showed 0 messages. I then logged back
into .mac webmail and all messages had been deleted!!!
I emailed .mac support about restoring my account but am not getting
any sensible help.
I have located in my mail/imap folder the cache folder which contains most messages (no emlx extension) up to 17 June 2006, it is about 600Mb.
However the message folder is empty (contains one recent message).
I have tried setting up a dummy imap account and moving the data to it and attempting to import the mailbox back in but no joy. Most help I can find is targetted at people who still have the message folder intact.
Any help greatly appreciated!!!!!!!!
imac g5 1.8mhz Mac OS X (10.4.7)

Hi Toby.
Sounds like you upgraded to Tiger Mail around 17 June 2006, right? And the cache folder you're talking about is called CachedMessages, right? If that's the case, then what seems to have happened is the following.
For some reason, your mail was deleted from the server (don't ask me why), and Mail deleted the cached copies from your disk as well after synchronizing with the server. BUT, the format used by Mail 2.x to store messages on disk is different from the format used by Mail 1.x. The CachedMessages folder is where Mail 1.x stored cached messages. Mail 2.x uses Messages folders and *.emlx files instead. Mail 2.x leaves the old files used by Mail 1.x there and just ignores them after the conversion. That's why CachedMessages has survived the disaster, whereas Messages hasn't. And that's also why you cannot see the cached messages in Mail now.
The only way I know of to recover those messages is using Emailchemy to convert them to mbox format first, then import them back into Mail doing File > Import Mailboxes and choosing Other as the data format. I haven't tried Emailchemy myself, so I don't know how it works.

OfficeJet Pro 8500 SLOW Networked via wire Takes 5 mins+ from Mac

Our OfficeJet Pro takes 5+ mins to spit out a print from Mac OS X (10.5.8) via a wired network connection. Windows machine print to it immediately.

I had the same problem. This seems to have worked for me: I configured the printer with a static IP address (see below).
Then I went to the Print & Fax control panel, hit "+" to add a printer, clicked "IP" and then put in the static address. It filled in the rest without any problem.
Giving the printer a static IP address is pretty easy to do if you have experience with networking; you need to choose an address on your subnet (often 192.168.1.xxx) which is not in the range given out by your router's DHCP server (your router's DHCP configuration page should tell you what this is). The "subnet mask" is almost always "255.255.255.0" . You can set the configuration either from the printer's web interface, or from the control panel.
Hope this helps!

Can I install OS 10.4 DVD on G3 B&W (CD-ROM only) from Mac Mini with DVD?

I have G3 B&W 400Mhz 384Mb memory 9Gb hard drive.
It has CD-ROM, Zip Drive, Firewire, USB & Ethernet and currenty running on OS 10.2.
I'd like to upgrade to OS 10.4, but it's on DVD.
I also own Mac Mini G4 with DVD-RW, and I can connect it to G3 with Firewire using Target Drive Mode. G3 recognize Mac Mini as a hard drive.
Can I install OS 10.4 from Mac Mini? Thank you for your help!

zakuro7 wrote:
Can I install OS 10.4 from Mac Mini?
If you mean the 10.4 DVD is a full-retail copy for any machine, not the version that came with the Mac mini.
BDAqua wrote:
...put the Mini in Target Mode...
some additional info on Target Mode
http://support.apple.com/kb/HT1661

I transferred a pages file from ipad to mac (also pages) via email for editing. However received message that cannot save edited document to the mac because "trial period has expired for iwork"! I have purchased pages for both machines separately. Ideas?

I transferred a pages file from ipad to mac (also pages) via email for editing. It opened normally. However, after editing, received message that cannot save edited document to the mac because "trial period has expired for iwork"! I have purchased pages for both machines separately and presumed they would work without a hitch. Am I missing something?

It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

QT from Mac to PC via ROM

Similar Messages

Maybe you are looking for