QT movie play back error

I have Photo to Movie software app' and made a movie of my recent slideshow project. On play back there were 3 areas in the 30 min slideshow where the screen went black for a second or more. I checked back on the original SS at these points but everything was fine. I have completed 2 SS before with no problems right through to DVD for TV viewing. I am puzzled why this should have happened. Any advice would be appreciated as I am not sure what steps to take now other than redo the whole process ( it took a while ) and see if it happens again.

No, there isn't a manual as such, only FAQ. The 'Help' does not respond when I type in Keep motion in Photo, and the helpline has not responded either. I will have to experiment and find out by trial and error which is usually the case these days. Shame because it is a great software package for the money. Results have been excellent when viewing on TV. However I am moaning but I found this product far superior to the iPhoto slideshow, it gave me so much grief trying to be creative with audio and text is not available. Also burning to IDVD was a nightmare I had lots of correspondence on this site with others with the same problems unresolved. Now I am happy with P2M and would recommend it to all iPhoto slideshow sufferers, at £35ish it's a snip! Thanks for your time and interest.

Similar Messages

  • HT4623 Play back error on utube

    One me iPad ,when going on you tube short clips are ok but films anythink long keep getting play back error on utube

    Hello Rickonetobe,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/ts1702
    Best of luck,
    Mario

  • S everyone else still getting play back errors with LP8?

    Hope this is resolved, i use a M-Powered copy of Pro Tools to track against a 2 mix of the Logic Session, and i barely get the tracks i did in LP6 to play with out a error, i can not run any midi, i got more tracks in previous version to play back then i do now in Leo with LP8.
    to narrow it down, i only use one verb bus, delay and echo bus, compressor on every channel used including Bus, Ozone on the master channel, i run only 20 stereo tracks, 4 which are with the ESX24., in Logic 6 i was running all this with a few Logic plugs on the master channel and not a hick up, and i was using a older 1.2 Ghz macbook pro, now i have a Core 2 Duo 2.4Ghz 17 inch MBP and i can not play beyond 8 tracks with compressors and a verb channel.
    Anyone find another work around, i was using the the one with the terminal command but i see no effect on it's performance anymore.
    -*MBP 17, Logic Pro, PT M-Powered with Ozone., DUET.*

    Logic Pro wrote:
    Hope this is resolved, i use a M-Powered copy of Pro Tools to track against a 2 mix of the Logic Session, and i barely get the tracks i did in LP6 to play with out a error, i can not run any midi, i got more tracks in previous version to play back then i do now in Leo with LP8.
    Sorry I'm a little bit confused
    this is your main question...
    Are you using M-powerd copy of Protools?
    if you don't use any Protools version maybe the issue is related with Apogee.
    in any case I had a similar problem on iMac...
    and... maybe i'm lucky, but the fresh reinstall without use DIGI or M-Powered (AVID) drivers and any Protools version ... PTLE is very similar as PTLE M-Powerd...
    I'm refering to that when I talk about PTLE.
    But if you continue to have the issue after a fresh instal without installin PT M-Powered oe any PT version... maybe you can try to use the internal built in audio card of your Mac book Pro...
    I hope that you will find the best way to solve your issue.
    Protools HD is not the same at all...
    Logic works fine on HD system.
    Good Luck
    G

  • Exported movie plays back fast

    Hi all, new poster on the apple discusions forum but wondered if anybody out there could help me.
    I created my first movie from iMovie last night, the footage is HD from A Sanyo Xacti 1000 camera (had problems getting the footage in the night before but thanks to these boards found a solution)
    Anyway cut a quick movie exported to AppleTV, created my m4v file, played back on ATV and the video footage appears to be running fast, almost like it's dropping frames but smooth. Audio was fine too... Anyone got any bright ideas?
    Thanks tim

    Hi.
    Best thing to do is to set Imovie'08's movie format to NTSC, even though the TV standard in the UK is PAL.
    But since you work ith non intelaced footaged, this will just change the frame rate iMovie works with to 30fps (29.97 exactly) instead of 25.
    Since all Xactis shoot at 29.97 or 59.94, this setting is much better for them.
    And it totally eliminated any choppiness effect for me.
    Beware though: changing the PAL/NTSC setting of iMovie from PAL to NTSC made very strange results in edited movies (offset edits) when iMovie came out. I do not know if this has been corrected in the latest 7.1.1 version.
    But you can always go back to your previous PAL setting and this eliminates all side effects, so there is no real downside trying.
    I also have an HD1000 now and have had no problem with 60fps footage- and I now know how to output from iMovie at 60fps
    Not sure if this has to do with it, but I do not use iMovie's import feature:
    I create a folder for the new event in the ~/Movies/iMovie Events/, copy the .mp4s from the HD1000 to it, and then launch iMovie. IMovie then creates thumbnails and everything.
    Hope this helps.
    I miss the good old times of miniDV, when everything just worked!

  • Movie playing back to front in Firefox

    Hi
    Im having a strange issue playing a flash movie.
    It plays no worries in IE, but when you try it in firefox it displays back to front.
    Both flash plugins in both browsers are the same version.
    Any way I can make the movie play properly in both browsers?
    Ive posted the code here
    http://www2.cpprint.com.au/flash.html
    Robbie

    I share your concern.  It is possible to download and install the Officejet Pro 8600 Plus driver as described in the post here.  The HP Pro 8600 Plus hardware is very similar to the Officejet Pro 8620, but the 8600 driver does include a page order option in the Advanced tab of the driver
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Apple TV Sound Drop after 20 Mins of Play. Also on iPad Movie play Back.

    Over the last week my Apple TV and iPad Mini have started to drop the sound on play back, after 20 mins.
    The stream via itunes on the Apple TV is stored on my Synology DS213j going to 2 ATVs one hard wired the other wireless.
    Itunes, Synology, Imac and ATVs all up to date with latest software and firmware.
    I have reset every thing rebooted and still the problem is there.
    Also done the sign in out of everything fingers crossed thing.
    The strange thing is I noticed when I watched a movie saved to my ipad the same thing is happening!
    This happened on a plane away from home set up.
    This must be a software issue in the ITunes family.
    Is any one else having this issue and have you found a fix, or do we need to wait for an Apple acceptance of the issue and a fix?

    Are you in the top level of the menu (not in the one where you select movies to preview).
    It may not have rented.

  • Choppy movie play back-everything working slow!!!

    I have an external hard drive, lots of space, but with only about 35 min of video in my I-movie 4 program I am getting a choppy playback that skips along without smooth play! I have the playback set to the standard setting (Smooth Playback) and still it does not help. Also I get a 30 second lag time with the color wheel spinning every time I try to do anything! But at one point all of this stoped, and the clips and transitions went right in with no lag time at all! Then for no reason it started lagging again! And it seems the longer I went adding clips and transitions, the playback choppyness kept getting worse! I also noticed at one point the green bar at the bottom that shows avalible space had changed! Insted of one solid bar it had all of a sudden become 2 short green bars with a space in the middle! What's with that? I am adding transitions between all my clips,could this be overloading the program? My experience in the past is that this all goes away when I burn the movie, but I can't check it now without all these problems! What do I do?
    Any help would be great...Thankyou

    Thanks for your reply Mike!
    I am running an IMac with Mac OS X
    It has 768 MB SDRAM
    The external hard drive is a ULTRA brand, capacity 232GB, available 186GB.
    It is on a fire wire, 400MB/sec. speed with the only other imput being the wire to camera. So both do not get used unless I am importing video!
    I have about 258MB of ram free, 78MB wired, 138.5 active (With AOL up, and a few others!) and 293.5 inactive! A total of 510.18 used. So 258MB free! Is that not enuff to run smooth? I also consolidated all decktop items to one folder and made sure no other programs were running.
    I put the I-movie program on the external hard drive in the hope of saving space on the computer. But then I had the problems. So I put the program back on my desktop and ran it from there and I still had the same problem with playback and 10-20sec lag for each click. So i don't think it's the firewire! But I burned the movie I made so far just to see what happend and it plays fine. This would leave me to think it's in the comp!
    So my next questions are...
    1) Should I keep the I-movie program on my desk top or shouldI keep it on the external.(Because I though that's what the external was for,saving big usage items!)
    2) Since I have the problem with the program on my desktop and the external drive both, does this mean the source is my computer!
    3) A friend asked about the video card I have. Would that have anything to do with it?
    This is very frustrating for me because the farther along I get, the worse the lag and playback problems get. It seems like a memory/avalable space issue causing my comp. to skip fames because it's to slow!?!? I don't know. When I was using final cut pro I just kept my scratch disc on the external drive and the program on my desktop. I see no way to do that with I-movie! Let me know what you think!
    Thanks again for any help,
    Bill

  • QT streaming .mov plays back video fine, but sound choppy with static

    I created some QT streaming files with compressor. 6 bandwidths for same video file. The files themselves play fine. When I click the QT ref movie I made the sound is poppy and has some static. You can view the video here.
    http://services.ltc.arizona.edu/MediaServices/betts/betts6.mov
    The problem does happen on more than one workstation, but the files on the server play fine. It's just when streaming. Any thoughts?

    Yep. Pretty horrible.
    Why not use some more modern codecs? Currently you're using Sorenson 3 and IMA 4:1 audio, Stereo and at 44.100Hz. No need for stereo in a "talking head" video. No need for an audio track that is only 4 times smaller than the audio found on a CD (4:1 compression).
    Use MPEG-4 Video codec and AAC audio. This will shrink the data rate and probably fix your audio issues,

  • Downloaded a Movie, playing back but no sound ?

    I down loaded a movie from Itunes, I started the paly back but I have no sound ?

    Applications/Utilities>Audio MIDI Setup
    Make sure the Format is either 44100Hz or 48000Hz
    If it ISN'T one of those two, that's what usually kills audio, on MP4 and MOV files especially.

  • Play back error in youtube

    hi
    after upgrading my ipad to iOS 8 , I couldn't able to view or play videos in youtube. Its saying playback error. So can you please help me from this problem

    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues
    We cant help you because you Jailbroke your iPod.

  • Swf movies playing back 1/2 the original speed

    I have a multimedia cd exported as an .swf. Inside of this I
    have a 'movie viewer' that loads external .swf movies into the
    project via 'tell target' command. I have roughly 20 movies that
    work fine, but for some reason the new ones I made are running at
    2X the speed inside the player. However, they run perfectly on
    their own though.
    The main swf is at 23 fps. I have adjusted the external
    movies to 1, 6, 12, 23, 30 fps and get the same 2X speed every
    time.
    Has anybody ever heard of this happening before? Are there
    any solutions to this?

    Thank you for replying and sorry it took so long to respond.  Now I can't get into my Verizon email so I didn't know I had a response on this site. I was also physically unable to sit at my computer.  Here is the info you requested:
    Transceiver Revision: 7.2.3.0   Vendor ID Code: 4   Line Mode: G.DMT Mode   Data Path: Interleaved     Transceiver Information Downstream Path Upstream PathDSL Speed (Kbits/Sec) 864 160 Margin (dB) 20.5 31.0 Line Attenuation (dB) 44.5 29.0 Transmit Power (dBm) 3.3 11.1
    on 8/15 I had the slowest download speed yet of 0.17 mbps! I am paying for 1.1-3mbps.  My modem is 6 or 7 years old.  I'm not sure if I mentioned the last 2 sentences before.

  • Made preference changes, but still getting the Ram preview needs 2 or more frames to play back.

    I'm new to After Effects CS6 and am working on a very simple Kinetic Typography project. I don't have a lot of memory, but this is a really simple project, so I'm wondering if maybe I'm just not using the work area correctly. Every once in while I can get the project to RAM preview, but only for a few seconds. Most of the time I get the "Ram preview needs 2 or more frames to play back" error message. I have pasted my sytem info and setting info bleow. Thanks for any insight! 
    I have checked the Render Multiple Fames Simultaneously box and have set the seetings at:
    Here is the info when you click on details:
    Installed RAM: 4.00 GB
    Current RAM Usage: 0.00 GB
    Allowed RAM Usage: 2.50 GB
    Process ID
    Application Name
    Min Needed Memory
    Max Usable Memory
    Max Allowed Memory
    Current Memory
    Current Priority
    3081
    After Effects
    0.00
    0.00
    2.50
    0.00
    3 - Low
    System info:
    System Version: Mac OS X 10.6.8 (10K549)
    Model Name: MacBook Pro
      Model Identifier: MacBookPro8,2
      Processor Name: Intel Core i7
      Processor Speed: 2.2 GHz
      Number of Processors: 1
      Total Number of Cores: 4
      L2 Cache (per Core): 256 KB
      L3 Cache: 6 MB
      Memory: 4 GB

    What exact version of After Effects?
    Show a screenshot of your TImeline panel and Preview panel when the problem occurs.
    Make sure that we can see the details in your screenshot. Your current screenshot is unreadable because it's so small.

  • I keep getting an error 2048 everytime I try to play back my Maya file that I saved as a qt movie. I just recently updated qt and this is when the errors would pop up. Before the update I had no problems. How can I fix this?

    I updated quicktime a few days ago and now I keep getting error 2048 whenever i try to play back my Maya file after saving it as a qt movie. I had no issues with this before I did the update, after the update I keep getting the error 2048 message. QT will play my earlier Maya movies and other video, it just won't play back my latest work. Help me please, I need this for school.

    The 2048 error message usually suggests the files use MPEG-2 format which is not supported natively on Windows via QuickTime without the additional MPEG-2 Playback Component ($20 from Apple).

  • HDV4 in a .mov file won't play back using any software

    Issue:
    I had 4 DVDs sent to me containing a bunch of .mov files that won't play back in any of the following apps:
    QuickTime 7 Pro (includes Mpeg2 codec from Apple's Web site) - sends me to Apple.com's QT plugins page
    Mpeg Streamclip - loads only some on batch import, but mostly displays white and plays the audio
    HandBrake - Says not a valid source
    VLC Player - error says that HDV4 files cannot be played
    QuickTime Player - says format isn't a format that QT recognizes
    I need to get this into a format usable by FCE.  I'm running the most up-to-date 10.6 Snow Leopard, and the last version of FCE.  How can I do this without losing my current version of iTunes or Final Cut Express?
    Vent:
    As videographers gradually move to hard-drive based cameras, their ability to submit their footage becomes more and more difficult.  As a result, we get DVDs, flash drives, 64 GB memory sticks, and more.  It seems like each one uses a different file format, and every format is proprietary.  Where is a standards committee when you need one?  Where is the open-source format?

    from: http://xkcd.com/927/
    In the words of my favorite engineer: "Standards are wonderful ... and there's so many to chose from"
    -DH

  • Frame Rate Error playing back h.264 encoded files in QT

    I originally posted this in the FCP HD forum, but was told that I might be able to get help here.
    I really like the h.264 codec, but I have to use Quicktime Conversion, instead of QT Movie, when I export in FCP. I get a 'Codec Error' when I try to export as a QT Movie. That is the first problem, but I work around it.
    The frame rate issue comes up when I try to export at larger screen sizes like 640x480. I have no problems at 320x240, but when I move up to the larger screen sizes the resultant QT mp4 plays back at 1/2 the specified frame rate, no matter what frame rate I try. It is really bizarre.
    I tried lowering the key frame number to reduce the processor load on playback, but this had no effect. This was a tip I picked up here.
    I tried lowering the bit rate, too. The only thing that 'fixes' it is to go back to the lower screen size.
    The problem is reproducible when the file is played on other (faster) computers.
    Any ideas?
    thx
    mike

    Open an H.264 video codec file on two machines (one of which is more powerful than your current one) and compare the data viewed in the Movie Info (Command-i) window.
    QuickTime, by design, drops frames to insure playback. You'll see the same issue when viewing any HD movie trailers. I get poor frames rates from anything above 480.
    Newer HD (1080i) videos may play at less than one tenth of the designated frame rate on older machines even though they use data rates that should (technically) supported.
    Blame it on advances in computers. I remember 90X60 "videos" at 8 frames a second that would "stall" during playback. Now we all want HD movies.

Maybe you are looking for