QT, not work fine with AppleTV. Why?

Hello, and Good Morning.
I Have ATV, MBP 17" C2D, Extreme Base Station and all work fine, but now, I'm ripped all my DVD for put it on iTunes Library. Well, when I use QT Pro 7.2 export to AppleTV (m4v) happen a desyncing with voice and image, and if I use MPEGStreamclip 1.9b3 no happen, the film is perfectly pass to .mp4.
I try to put images, are QT properties audio and video, and see the file m4v (QTPro) have audio *9 seconds* less video.
Quick Time Pro 7.2 of "Deja Vu film" *9 seconds of audio less* Why ???
Image: !http://homepage.mac.com/humbertoiess/m4v.jpg!
MPEGStreamclip 1.9b3 audio and video *same time*
Image: !http://homepage.mac.com/humbertoiess/mov.jpg!
Thanks in advance

You'll have better luck getting an answer by posting in the Quicktime forum.
This forum is mostly about the ATV hardware side.

Similar Messages

  • Siril not working fine in my i5 with new ios7

    Dear sir,
    I believe my Siri is not working fine with IOS 7 in my iPhone 5.Only 1 function it works on is call my dad or call contact people. It does not act well, when i ask to do other tasks like message my dad or other contacts /  what is the climate / or anything else
    It says please try after a little while.
    Bit same task are performed better on other iPhones
    How to re install the software or how to rectify this issue
    Regards
    Ashish
    <Personal Information Edited by Host>

    I have asked the hosts to remove all the personal information - this is a public forum (only other users here - Apple does not generally participate) and it is not safe to show email, phone numbers, and addresses.
    Good luck!

  • Remote not working properly with Apple TV...sporadic fuctioning

    Hello,
    I have no idea what caused this to happen, but both my remotes (I have one from my MacBook Pro and one from my AppleTV) seem to not work properly with AppleTV. It sometimes works but it is extremely frustrating as it only registers about 1 out of every 10-20 clicks then continues to remember the previous clicks therefore making it essentially impossible to select the desired menu/item. Basically it just seems like it's out of control!
    I tested whether it was the remote or AppleTV that was causing the problem by running Front Row on my MacBook Pro and both remotes seem to navigate Front Row perfectly fine. They both act the same way with AppleTV, whether they are paired or not. It seems as though something happened with my AppleTV. This problem occurred randomly, with no specific cause I can think of.
    Please let me know if any of you have ever experienced this problem and what your solution was, if any!
    I have tried restoring to factory conditions, resetting settings, ran diagnostics, unplugged and replugged it, and nothing seems to be working!
    Oh, and I just replaced the battery on one and have tried swapping batteries, etc.
    HELP PLEASE!
    Thank you,
    Travis

    The menus have never been as responsive as they used to since the 2.0 update in my opinion - basically AppleTV seems to cache/buffer remote click if it is busy or perhaps waiting for something to stream from itunes, and when resources become available it suddenly executes all command rapidly which makes it behave wildly in menus.
    Usually happens I find after restarting the unit or if streaming drives have gone in to power saving modes and there's a delay while they wake up to feed the AppleTV.

  • Smartform : line type not working fine when used on Next page

    Hi ,
    Please help on below :
    I have a smartform and have line type which is used in printing the items.
    When I use this line type on very first page , it works fine.
    But for the next page which is the exact copy of first page ,
    the line type does not work fine with printing first line item on next page,
    it refreshed the work area which i am printing. so on the next page very first element gets all the values 000
    But on the next iteration it works fine and does not refresh work area.
    Please see why is such abnormal behavior happening.
    Regards,
    Uma Dave

    Hi Ameya
    there might be syntax error. Try to get what exaclty is an error using following code.
    CALL FUNCTION <smartform>
        EXCEPTIONS
        IF SY-SUBRC  0.
           CALL FUNCTION 'SSF_READ_ERRORS'
                IMPORTING
                     ERRORTAB = IT_ERRORLIST.
         ENDIF.
    In IT_ERRORLIST you will get error message.
    Regards
    Sachin G Patil

  • Hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

    hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

    Have you changed the system voice to an English one in system preferences?

  • HT2515 My cam works fine with every program except yahoo.  If I just sign into yahoo or even if I use ichat for yahoo, the webcam button will not highlight up.  How can I fix this and/or what am I doing wrong?

    Hello, my father recently passed (using his ID) and I took over the payments on his mac and took his computer.  I am not that familiar with mac, but am usually computer savy.  However, this one has me stumped.  I have no problem starting the built in cam and it seems to work fine with all other programs I've tried using it with.  However, it will not work with yahoo.  Whether I use normal yahoo messenger or if I try using Yahoo through I chat.  The cam button will not light up, therefore, it is not clickable.  Which ultimately means I cannot use my cam on yahoo, which is something I use 99% of the time compared to other programs.  So why is this happening and what solutions can I take to try and fix this?  The mac I am using is: Mac OS X, Version 10.7.4
    Thank you for any and all help, it is much appreciated. 

    Welcome to Apple Discussions!
    1) If the iTunes preference window is open when you connect your iPod, the iPod will not be recognized by iTunes.
    Also, iPods can work with many iTunes libraries, so that is not the problem here.
    Is all the software on your computer up to date?
    iTunes
    iPod Updater
    Updating iPod's Software
    Does the iPod show up in My Computer when connected to your computer? Does it say Do Not Disconnect?
    Try the steps listed here...
    iPod shows up in Windows but not in iTunes
    If you are going to use your iPod with multiple iTunes libraries (home and school)...
    Using iPod with multiple computers
    2) What part aren't you understanding. Here are a couple of free programs you can use to convert videos...
    MPEG Streamclip
    Videora iPod Converter
    The programs should come with documentation and instructions to convert videos.
    3) You can go to file-->add file to library, file-->add folder to library, or have iTunes open and drag the files into the iTunes library while viewing the library.. You can also import from CDs.
    iTunes needs to be adding the songs to the iPod. You cannot just add the song files to the iPod.
    btabz

  • Why won't some photos or videos sync to my iPad when they work fine with iPhoto and iTunes?

    Why won't some photos or videos sync to my iPad when they work fine with iPhoto and iTunes? Other photos taken with same camera sync fine from iPhoto while certain events are inexplicably incompatible. I've recently foundvthecsame occurrence with certain mp3s and videos from iTunes.

    For photos try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
    Not all video formats that work in iTunes are compatible with the iPad - the supported formats are (from http://www.apple.com/ipad/specs/) :
    Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Have you tried Advanced > Create iPad Version and then sync those versions to the iPad
    The iPad's supported audio formats are :
    HE-AAC (V1 and V2), AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV

  • I am transmitting data over internet and WiFi ,it's working fine with internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi?  Please help me.

    I am transmitting data over internet and WiFi ,it's working fine with Internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi?     Please help me....
    Thanks in Advance.
    Neeraj@iDev

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

    I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM.  My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore.  Connected those drives to TM via firewire and could see the drives and access them.
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.  I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads.  Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system.  I really didn't want to monkey around too much with my system.  But are there other options to connect the new TC.  Can't find info anywhere for this and called apple who gave me the info above.  after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light  or repair it in disk utility if it should become corrupted.
    For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working.  Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
    Now a rant.  I can't believe in this wireless age that Apple would make a product that cant join a wireless net work.  The apple rep said i could return it and look for the previous TC that would join an existing wireless network.  Are we going backwards?
    Thanks!
    lennydas

    Ok... it is getting a bit clearer but there are still some questions.
    I connect to the internet via airport only and it is pretty fast.
    I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.
    I think this is mistaken.
    Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
    If the computer is close it will be faster than the FIOS.
    You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
    I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC.  the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
    Thanks again!
    You cannot extend to a non-apple wireless router.
    You cannot use join a wireless network because when you do the ethernet ports will be cut off.
    But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
    Join in the express is the only apple router that still allows an ethernet connection.
    For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

  • How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    Can you give me a screenshot of the User Accounts window in Control Panel?
    Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

  • HT1296 Is there any way I can transfer the music from my ipod touch to my computer without having to pay for it? Itunes worked fine with my ipod on my old laptop. I am not willing to risk losing all of the music on my ipod to update to the newest iOS.

    I really don't want to lose all of the music I have on my ipod touch. It worked fine with my ipod and my old laptop but I got a new laptop and now it doesn't want to sync anything except purchases I made on the ipod and everything that was in the cloud. The rest of the music on my ipod is from old CDs and I am away from home. I would greatly appreciate it if someone could give me some advice. I also don't really want to pay for a download that moves the music into itunes so if anything is free and safe that would be great or if there is a way to do it manually. Again thanks to anyone who has advice to share.

    You would have to purchase a 3rd party program ( not supported by Apple).
    The ipod is not a storage/backup device.
    Copy everything from the old computer or your backup copy of your old computer.

  • My iPad is set up for my Apple ID account and works fine with iTunes. But when I try to use it for the App Store, my wife's apple ID shows up, not mine.

    My iPad2 is set up with my Apple ID and works fine with iTunes. But when I try to use the app store, my wife's apple ID appears in the password window, not mine. How can I get my apple ID to show up?

    Sign her out and sign yourself in!

  • With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

    With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

    From the fcp.co forum. See if this does anything for you.
    simon_hutchings
    OFFLINE
    Junior Boarder
    Posts: 24
    Thank you received: 5
    Karma: 1
    I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
    1. Open the application Audio Midi Setup (located in Applications : Utilities)
    2. Select the Output Tab for the current output device
    3. Select the Configure Speakers option
    4. Select the Multichannel tab
    5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked. 

  • Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

    iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB.  I already tried uninstalling and reinstalling iTunes....still nothing.  Any ideas?

    Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

  • Why does my iMessage not work even with my apple ID signed in?

    Why does my iMessage not work even with my apple ID signed in?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom
    BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

Maybe you are looking for